Database Users

4.01.00 ups and downs or "it's out and free"

Ok people ...
since this one is spreading let's pull up a list of what you can or you cannot get with this one.
Version 4.20.0 (Build 13252)
RSU 6.24.01
The SIM software has a "Built Oct 14 2003" ...
AND YES !!! The Messenger is updated and it's working.
That's the first impresion.

So first step in the kitchen :
remember the params for the 4.00.21 ?
old stuff
wincever=4
start1=81740000
size1=00040000
start2=81c00000
size2=00300000
startbmp=81ec0000
startop=81c00000
that was over 3.4M of free space
NOW @ 4.01.00:
wincever=4
start1=81740000
size1=00040000
start2=81c00000
size2=00300000
startbmp=81ec0000
startop=81c00000
that is IDENTICAL
so ... again some space to fit our little "must have" apps.

Ya, but where do you get it

access info
thanks to ddevilx2 you can go to:
130.39.48.102 port 21
login tmobile password rom

Are there any kitchen's online where we can cook this up?
thanks in advance

obviously not "YET" ... since the only available is Yorch's ... and he's getting married ... you should probably start unsing your linux box or cygwin and set up your own.
it's fun :wink:

BALL & CHAIN :roll:

I've tried to set one up a couple of times to no avail. If someone wants to help me set one up I will host it at my expense. Let me know. I have all the 4.00.x ROMS and would like to make them all available.
BTW, I extracted the nk.nbf file from the exe so you don't have to change radio stacks.

Re: access info
decebal said:
thanks to ddevilx2 you can go to:
130.39.48.102 port 21
login tmobile password rom
Click to expand...
Click to collapse
very sweet! thanks decebal & ddevilx2

I tried that ftp site and it likes tmobil okay but not the password rom....any suggestions?

Worked for me 20 min ago

it is exactly as the post says: tmobil/rom
as opposed to t-mobile or T-Mobil/ROM or some such?

got it...its Tmobile/rom for those of you who have yet to try.

UGH. I think I just blew up my T-Mobile Pocket PC Phone. I downloaded the 4.01.00 per this thread and tried installing. During the radio stack upgrade it said "upgrade failed". The windows app came up with a message that said that I could recover from it by removing the usb cable and resetting the device. The upgrade should then recover. It never recovers though - I get as far as "Welcome to T-Mobile Test Only Not For Sale", with the version information showing as:
G
R
4.00.21
Never makes it past that. I tried the hard reset button as well with no luck.
I realize that this is the risk I take, but can anybody help???
Thanks!

Not sure what you can do.
BE WARNED PEOPLE that an .exe install is the RISKIEST way to update your device. Do an SD card method instead.

Can anyone tell me if this ROM (4.01.00) is for 900/1800 MHZ or 900/1900 MHZ devices?
TIA,
Max

All I saw on the FTP server is the exe file, is there a nbf file?

Just open the .exe with winrar or winzip, then you just extract the .nb file or more if you wish. Anyone have a listing of the differences with this ROM?

groggrog said:
- I get as far as "Welcome to T-Mobile Test Only Not For Sale", with the version information showing as:
G
R
4.00.21
Never makes it past that.
Click to expand...
Click to collapse
OK, IVE BEEN HERE
RESET DEVICE, PUT ON CHARGER [NOT CONECTED TO PC, JUST CHARGING], AND JUST LEAVE IT THERE... DONT DO ANYTHING, IT WILL LOAD, AFTER LIKE 30 MINZ OR SO :mrgreen:
WHEN OS LOADS, DELETE THE 4 RS UPGRADE FILES FROM WINDOWS DIR.
THEN IF U WANNA GIVE IT ANOTHER TRY, DECOMPRESS THE 4 FILES FROM THE *.EXE FILE AND MANUALLY PLACE EM BACK TO WINDOWS DIR. ... AND IF NO LUCK, GO WITH ATT STACK, LOW FAILURE RATE (as i am told) 8)

Ok I feel stupid, man that was easy.

How to update ROM on O2 Orbit-solution

All,
I've exchanged many emails with the imei.check.co.uk team and also met personally one of these guys in order to be able to upload a new ROM to my O2 Orbit. I had excatly the same problem as many of you with ending the uploding process with "model invalid id" error message.
Now I'm happy to say we do have a solution.
So if you want to change your ROM (any), simply follow these instructions:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Of course you can publish the instructions...
BUT PLEASE put a BIG WARNING! It will crash the phone in case you don't have a valid key file to perfom the last step: RUN THE UNLOCKER AGAIN AFTER THE ROM MODEL SWITCH TO RECOVER FROM THE DATA CRASHED MESSAGE!
Hello,
we found a way to flash ANY artemis roms in ANY Artemis look alike device (HTC Hero too).
Tools you need:
-hexworkshop from http://www.bpsoft.com/downloads/
-Any rom
-winzip or winrar
-http://www.imei-check.co.uk/C3v1Unlock.zip
a valid UNL file for your phone.
install hexworkshop and winzip/winrar
Take any rom for example: ART_HTCWWE_11240501_026790_WWE_Ship.exe
in explorer, right click on it and select "Extract files..."
Now it will unpack all the files
You'll have now "HTCWWE_shipsigned.nbh"
right click on it and Click "Hex Edit with Hex Workshop"
You'll see on the 5th row ARTE10000
Make it ARTE***** and save file
Now right click on ROMUpdateUtility.exe and "Hex Edit with Hex Workshop"
Search for word password.it will find it at 0x3E0B0 after password replace "BsaD5SeoA" with "IMEICHECK" and save the .exe file
Now connect the phone to the pc (normal way). run the C3v1Unlock.exe
when is asking for UNL file, disconect the phone from pc, press cancel, and
close the unlocker.
Now connect the phone back to the pc (in this mode it is) and run the
ROMUpdateUtility.exe
Now follow the instructions as the upgrade it will work.
After upgrade done, run the unlocker again and this time select the correct UNLfile.
Task Done.
C3 after flashing with any WIFI roms it will STILL not have WIFI!!!
Regards,
IMEI-CHECK Team
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cheers, Martin

YESS, I have changed my GER rom to new HTC official ENG Rom, you are the best!!!!!! It's very simple to do...
yuppyyyyyyyyyyyyyyyyyy
the next step is.... backup the ROM I'm search ITA ROM form my HTC 3300.
see you later...

Good Discovery,
But the key is: We will have to pay 38USD for the "Proper UNL file" which is unique for every IMEI. Is it right?
Yeah, Thanks mr. Martin who is from Imei-Check Team. But we are still looking for a free solution.
Regards!

Tamagochi,
yes, first you have to go to imei.check and pay for the unlocking program and the unique .unl file.
P.S. I'm not a member of imei.check, just had the same problem as many Orbit users here...you can find my previous thread.

Works great on all versions.
Great support from the boys from emeicheck

Question about directions
Okay, I'm gonna try this. Do I still follow these directions exactly even though I have already unlocked the CID?
Also, when you see the line "ARTE1000" do you actually replace the "1000" part with the little stars? Sorry, I'm really new at this!
Thanks!

Yes you must do it all.

HELP
Everything went smoothly but when the device rebooted, it want me to "align the screen". It doesn't seem to be able to detect the stylus touching the screen! Can't get past that screen! Anybody know what I could have done wrong?

REF: HELP (Never Mind...)
I DID IT, I DID IT, I DID IT!!!! Just had to wait a minute or two and then everything seemed to work fine!!! TomTom is there, my WiFi is working! Thank you MAROSV and FRANCOBANCO!!!! If I can do it, ANYBODY can!! THANK YOU!!!

Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.

towelie said:
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
Click to expand...
Click to collapse
hi, I've just used the last HTC offical Rom (see xda ftp site..) that include TomTOm + 1 city map
byebye

Hi, I used the ROM on the Wiki page Dopod|English|DOPOD001|ARTE1****|1.25.707.2 ??/??/0?|1.25.707.104|1.25.0000|02.69.90|4.1.13.30| [Download|ftp://xda:[email protected]/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe]|[Thread|http://forum.xda-developers.com/showthread.php?t=286639]
It worked like a charm. The only problem I had was that when the Orbit re-booted after the process finished, it didn't seem to detect the sylus. I just waited five minutes and then it worked. Guess it was still getting settled in with it's new ROM. I don't know where I had the TomTom before I started the update, but it installed the German maps which were there before but as a bonus it gave me a English speaking voice which I didn't have before. It came with a German voice and I couldn't change because I had not yet upgraded the memory and had no room. So, my update was super! The only little thing is that once I changed the screen color back to blue instead of that terrible green, I couldn't get the phone part (dialing pad) to change to blue. No biggie, as now I can use my Orbit in English. I can live with the green phone pad! Maybe somebody will tweak that one. Hope this wasn't more info than you needed....

KleinMouse,
the dialing pad can be easily changed as well....just do a little seach on this Artemis forum and you will find many links pointing to skins available for WM5 phone edition.

O2 Orbit ROM upgrade info
Hi,
my o2 orbit has ROM 1.25.206.2 WWE. I wanted to know if this is the latest ROM available for my phone. I got my phone 10 days ago and i gotta do a soft reset on it every day. I had the same kind of problems with o2 Atom. But most of the issues were corrected once the ROM was upgraded. Please someone update me on my situation. Thanks

I tried the steps but i'm always getting the ERROR[300] : INVALID UPDATE TOOL - This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility
Anyone who can help me here? I already tried different ROMs but always the same message

Did you unlock with imei-check? What is your model ID ARTExxxx ?

Yes i did. My Model ID is ARTE100

Hmm, but the steps described above are necessary to follow only if your model is Orbit (ARTE200). If you have HTC P3300 or Dopod p800W or Artemis or MDA compact 3, then you don't need to do it this way. The only thing you need to do is to unlock with Imei-check. If it still doesnt work, contact their help desk.

Ok i see, very strange indeed. I did the unlock with the stuff from Imei-check but i still get the message ERROR [244] : INVALID MODEL ID . If i try the steps from your post #1 , i get the described error obove. I'll try to contact the guys from imei-check, i hope they can help me

Hi Kleine Maus, I read with great joy that you succeeded and I would like to feel the same way.... Could you kindly reply to me and give me some detailed instructions to follow? Hopefully this will work for my HTC P3300....Thanks in advance.... I really appreciate it. Best SiperX

Splashcreen update problem

hi,
New to the "ROM update" world, i've succeded in installing the French Rom V1.25.406.1.fr on my HTC Cruise (Polaris).
My "problem" was this red and very ugly "SFR / vodafone" splash screen. Then, i searched on the forum to find a way to change this screen and found this thread :
"How to kill vodafone startup" : http://forum.xda-developers.com/showthread.php?t=368421&highlight=sfr , redirecting to a ...Trinity thread.
I arrived to the WIKI page dedicated to this : http://wiki.xda-developers.com/index.php?pagename=Trinity_SplashScreen and followed instructions using "mtty" :
USB> task 32
USB> lnb finalsplash.nb 500e0000
USB> task 8
USB> task 32
USB> lnb finalsplash.nb 50140000
USB> task 8
The device restarted twice (after each "task 8" command), and now offers a white startup screen, but keeps on loading WM6 FR correctly. So there has been a problem while updating the screen but did not cause a dramatic failure.
I then restarted the device in booloader mode and found that the description in the red section had been sort of corrupted.
It now displays :
::::::::::: MFG
SPL-2.20.01inex
CPLD-2
As it looks strange to me, and as i can't find a way to have a proper splashscreen i decided to reinstall the ROM package. But when starting to install i now get this message "ERROR [244] : INVALID MODEL ID". On this error screen is also diplayed a kind of serial number on the right bottom, and it looks "corrupted" as far as i remembe i saw such number ant it was normal during my first installation. It now displays : "N-&ààaâäae-S-PPND./01*"
After this quick recap, i would be very please to find help for any tech guy (or not) who could find a way to get install a proper ROM on my device that will be updatable again.
hope i'm clear (i understand this can be a little messy ..), and i really hope someone will help me get rid of this.
thanks guys.

Mef said:
As it looks strange to me, and as i can't find a way to have a proper splashscreen i decided to reinstall the ROM package. But when starting to install i now get this message "ERROR [244] : INVALID MODEL ID". On this error screen is also diplayed a kind of serial number on the right bottom, and it looks "corrupted" as far as i remembe i saw such number ant it was normal during my first installation. It now displays : "N-&ààaâäae-S-PPND./01*"
After this quick recap, i would be very please to find help for any tech guy (or not) who could find a way to get install a proper ROM on my device that will be updatable again.
hope i'm clear (i understand this can be a little messy ..), and i really hope someone will help me get rid of this.
thanks guys.
Click to expand...
Click to collapse
well congratulations for managing to find the place it stores the Model ID, hard luck for managing to wipe it.
what I'll do is rbmc my device and dump off my nand so you can write back a valid ModelID... but in the worst case scenario I can just bung you a patched SPL to ignore the model ID.
I think I'll post the correct addresses on the wiki... also, rather than committing suicide like that, in future, build an NBH properly and the device takes care of the addresses for you.
oh, one other thing, could you please check and see if your WLAN is dead or not.

Thx for your time dude. i feel so stupid ...
oh, one other thing, could you please check and see if your WLAN is dead or not.
Click to expand...
Click to collapse
I've just checked my WLAN. it could correctly open a WPA TKIP session on my router and browse mobile.htc.com with Internet Explorer.
That must mean it's alive and working i think.

yeah... unicode string at 0x50104000
I think we can probably recover you if we make a 0x100 byte file with the appropriate data and lnb it to that address

OK, I've reconstructed you a ModelID to flash using lnb...
command is
lnb 50104000 thefile.nb
(where thefile.nb is the filename of the NB in the zip... please remember to extract it)

That's really great news. I'm crossing fingers. thx.

Guess what ?
The bootloader now dipslays "POLA100". Big thank Olipro !
I'm on my way to have a ROM UPDATE in order to know if i can give you the title of fu*** genious of the day or not
PS : correct command is "lnb thefile.nb 50104000"

ROM update successful, title confirmed !
Cheers Olipro

yes, my mistake, it's file then addr.
incidentally, the correct address to lnb the splash screen to is 0x50140000 and 0x501A0000 respectively.

Mef said:
ROM update successful, title confirmed !
Cheers Olipro
Click to expand...
Click to collapse
Oooppss! you missed to click on the "Olipro you're Great" Button

You know whether to replace the splash "welcomehead.96."
I am trying to copy in the folder of Windows, but it doesn't go.
I have the Italian original rom.

Serious help wanted. Device ID?? flash ROM the sollution???

Hi there,
I'm a SE X1i for a week and I have a problem. I wanted to install TomTom 7v but it keeps asking for a
"Device ID".
-I have tried so many things that i can't even remember them. But i still couldn't get the Devicename.
One was telling me that i must install TomTom V7 on the X1 and after that i could find a file called ttnavigator.bif of so
that i can open in Word.
But i couln't get the file :S:S
-The other one told me to look it up in the propertys of the bluetooth device.
but there is nottin to look at because my pc is making connection by USB
-And the other one has made a application that can track my "Device ID".
this one gave a error so I still could not have a "Device ID"
So i was thinking maybe by flashing the ROM gives other programs more information about the "Device ID".
Then I noticed there are 2 ways for flashing your phone. one is by PC and the other way is by MicroSD.
Then I wanted to use my PC.
For this I used this post and the PDF Files that were attached. But i could nog find the application called EMMA.
Then on another post it told me that that can't be done because it's Tmobile branded
So now i'm at my final stage. So i tried to do it by SD card. then I came to this post:
*** Flash X1 without PC - Micro SD Method ***
0. Make sure x1 is hard-spl first
( http://forum.xda-developers.com/showthread.php?t=445662 )
And now i just don't know what "hard-spl first" means :S:S
I'm a little bit f*cked up. I have tried so many things even look it up on youtube. But i didn't come far.
So i only need a Device ID. That's all ... now no one can tell me i didn't do my homework first
Can someone help me out plz
your help will be appreciated
Many Greetz
PeteyB
p.s sorry about my english

TomTom7 doesn't ask for Device ID, cracks and hacks for TomTom7 do.
This is a no Warez forum.

yeah, and tomtom always lets you download 1 region map for free.

P800 rom flashing problem

I have an unbranded Chinese P800 from eBay and would like to upgrade it to WM 6.0. What I have onboard :
1. WM 5.0 OS 5.1.525 (Build 15364.3.4.4)
2. Processor ARM926T OMAP730
However, one perculiar thing is that I can't find any Device Info on IPL, SPL, Radio ROM etc. I've tried using WST 4.2.2 but to no avail. I'm using my Lenovo S10 Netbook running XP and ASync 4.5. What I've managed to do are :
1. Run USPL, it goes from 0.. to 60.. and hangs, I reset my P800, USPL resumes to 70..100 and the RUU program starts,
2. the screen on my P800 turns dark with the Linux Penguin and some message of mapping, preloader etc comes on temporarily before Windows comes on again,
3. RUU runs, upgrading to image 9.99 (original image is blank-no info), when UPDATE ROM IMAGE ON YOUR PDA PHONE comes on it never gets to more than 0% (no blue progress bar), my P800 screen goes dark, loses connection and I get ERROR(260).
I have done this several times and there is no way I can verify if the CID is unlocked as I can't get the SPL info anywhere. So I will appreciate any help I can get. Thanks in advance.

Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem

mouse.co.nr said:
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
Click to expand...
Click to collapse
Hi mouse.co.nr,
Many thanks for your reply and pointing to the right direction. I'll get to it asap and post the outcome (success I hope!)

Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse

mouse.co.nr said:
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
Click to expand...
Click to collapse
Hi mouse.co.nr,
Well noted and I'll keep this in mind. From your experience have you ever tried the SDHC.cab so that your phone can read the micro SDHC? I ran it in my phone and now my STORAGE CARD is gone! Anyway, thanks again. Cheers!

Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse

mouse.co.nr said:
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
Click to expand...
Click to collapse
Hi Mouse,
Thanks to you my STORAGE CARD problem is solved! However with regards to my ROM update I'm still a little confused.I've managed to patch the artemis_jumpSPL_pof_v1.nb using Kermit the Frog(jumpSPL.exe). After that I run the RUU again but I still get the same result-0%Can you tell me how or show me the relevant threads?

Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse

mouse.co.nr said:
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
Click to expand...
Click to collapse
Hi mouse,
Actually "Kermit the Frog" is the icon for JumpSPL.exe. Anyway, like I've mentioned in my first post everything seems OK except that I can't check for the SPL and when the RUU runs it never gets to more than 0% and then I lose connection and get ERROR 260. I'll be trying again and let you know of the outcome. Once again, thank you, I really appreciate your help!
salimbs.

Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility

mouse.co.nr said:
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
Click to expand...
Click to collapse
Hi Mouse,
I'm open to all suggestion. I'll try it again and we'll see. Thanks.

I'm afraid that I've not met with any success after trying all the combination and tricks mentioned in this thread. Every time at the part of the RUU flashing it never goes beyond 0% then I lose connection and get ERROR 260. I would appreciate any help I can get, and thank you in advance.

Hallo,
i have got a p800 from china and have the same problems. I tried all things but the update doesnt work. The connection always interupts with err260.
regards