TPEnable / TPDisable on Alpine (Qtek2020i) - MDA II, XDA II, 2060 General

Hi,
I assigned Camera and Notes buttons to TPEnable and TPDisable and when I activate TPDisable, it locks up both the touchscreen AND all of the HW-buttons on my XDA2i
I have to do a soft-reset in order to get the screen and buttons to work again.
Anyone know how to make this work so that the HW-buttons don't lock ?
(I got the TPE and TPD from the Alpine folder on the FTP...)
Qtek 2020i
Rom: 1.11.00 WWE
ExtRom: 1.11.112 WWE
Radio : 1.02.00

Related

HELP: BOUGHT MDA COMPACT TMOBILE NEED VOADFONE ROM

Hi guys
I bought a new MDA Compact on TMOBILE and i unlocked successfully with your great app (thanks). I want to remove all of the tmobile branding on the phone (there is loads). I need to change it so it is like the Vodafone VPA (equivalent of MDA) Is there anyway i can do this. Here is my device info:
ROM version : 1.12.00 WWE
ROM date: 5/28/05
Radio Version : 1.12.00
Protocol Version : 1337.42
ExtRom Version : 1.12.152 WWE
Model No: PM10A
Please help
The easiest way to do this is to make a hard reset (all data will be lost) and press the reset button once the touchscreen initialization pops up. Then you will have a completely unbranded Magician.
Afterwards you can check for the Vodafone ROM here on the FTP, but most applications (cab files in the extended ROM) are not branded and the same as for the other Roms. The provider settings can be entered manually. Use the search for more informations on this.
dandie thanks/
Everytime i try to do a reset with power and reset and press reset at the windows touch here screen it still does customizing. Its so annoying could some1 plz tell me another way of getting rid of this stupid branding

How to stop Jam switch itself on BT notifications

My i-Mate Jam keeps switching itself on when external BT devices (headset, GPS receiver) send some notification to it.
Is it possible to stop this?
--------------
i-Mate Jam
ROM: 1.12.00 WWE
ROM Date: 05/28/05
Radio Ver. 1.13.00
Protocol Ver. 1337.43
ExtRom Ver. 1.12.128 WWE

Which ROM to install on Orange SPV M600 (aka HTC Prophet) ?

Just got a new Orange M600, herebelow is the device info;
ROM version: 2.10.1.22 WWE
Rom Date: 2/16/06
Radio Version: 02.07.20
Protocol Version: 413.1.03
ExtROM version: 2.10.1.107
Operator Version: 13.10.1.107
IPL 2.10.0001
SPL 2.10.0001
I used machinagod lokiwiz 0.3 to SIM unlock my SPV M600.
Now;
1) Which ROM is the latest and best and can i install it on IPL/SPL 2.10.0001? If yes, then how?
2) Which buttons to press for bootloader?
3) Does bootloader Hard Resets the device?
4) Can Orange M600 ROMs be downloaded from some website like u can download jamin roms from ftp.clubimate.com?
5) Which is the latest ROM from Orange UK?
6) Do i need to run some app. to remove the restriction which prevents you from installaing unsigned app.?
7) Can the registry values be edited or do i need to unlock something first?
8) I understand Prophet is WiFi b/g but on Orage UK site is shows
802.11 b?
So is the Orang SPV M600 not the same as other prophets like Jamin, S200?
can somene help answer my queries pls!
someon please help because i would like to know too. thanks.
Hi All,
i have the same question:
ROM version: 2.10.1.26 NLD
Rom Date: 2/17/06
Radio Version: 02.07.20
Protocol Version: 413.1.03
ExtROM version: 2.10.1.106
Operator Version: 13.10.1.106
IPL 2.10.0001
SPL 2.10.0001
is there any upgrade available at the moment?
thx :wink:
Someone Help Me PLS.
On my M600 I have gone with the latest i-Mate rom (download from the xda-developers ftp site. This is version 2.13 and I have found this to be so much more stable than the orange rom 2.10.
1. Installation was a breeze, although I had unlocked my device using the imei check site not lockwiz - don't know if this will make any difference. But for me it was just a case of running the i-Mate installer (without having to mess around with swapping files around).
2. Hold the power and camera buttons while doing a soft reset and this should bring you up in boot loader mode, however, using the i-Mate installer you just run the exe whilst your device is connected to your PC in the normal way.
3. I don't believe that going into bootloader mode does hard reset your device, but of course a ROM upgrade WILL!
4. Don't know where you can download the orange ROMs from. As of yet I have not seen any updates, besides I am happy with the i-Mate one.
5. As far as I know 2.10 which is pre-installed
6. I have only used the imei check unlock to remove the sim unlock
7. Yes you can edit the registry values with any pocket pc registry editor, I personally would recommend Resco File Explorer (that comes with a good registry editor) but there are also a number of free ones out there...
Not sure about the b/g.
Hope that helps a little.

Keyboard problem, please help!

Hi all,
I have an Wizard SPV M3000 from Orange which is SIM-locked and in FR language.
******** What I did:
- SIM-Unlocking (by a shop) and ..... success
- ROM upgrading (by a shop) and ..... success with the information:
ROM version: 1.5.4.2 WWE
ROM date: 11/8/05
Radio version: 01.09.10
Protocol: 4.0.13.20
ExtROM: 1.5.4.102
********* My problems:
1 - Hardware keyboard are AZERTY (FR). Can I change the Software keyboard into FR so that I can get what I press (press Z and get Z, not get W). And How?
2 - There are 5 buttons in Hardware keyboard are in status of no signal: I press and it display nothing. Could you tell me why and How to solve it?
3 - I can not connect my Wizard to laptop as it "Retrieving Setting..." for very long time (I waited 5 hours and it still retrieving?!?!?!?!)
Please help me to solve the above problems!
Thank you all

O2 Clip + Dopod 838 does not work

Hi all,
I have O2 Blue tooth headset "clip" model. I am trying to pair the same with my Dopod 838 handset. I have the following ROM on my 838.
ROM version: 2.21.13.1 WWE
ROM date: 03/09/06
Radio Version: 02.19.11
Protocol Version: 4.1.13.09
ExtROM version: 2.21.13.102
When i ask for adding new partnership, the handset identifies O2 and then asks for PIN, when i enter "0000", it goes into a big loop and in the meantime, the bluetooth headset comes out of the pairing mode...
Can anyone suggest, how can i use O2 headset (bluetooth, clip model) with Dopod 838?
My bluetooth O2 model is here:
http://www.mtekk.com.au/Articles/ta.../Genuine-O2-Bluetooth-Headset-MiniReview.aspx
Any help is appreciated...
Greetings,
Kusumba S

Categories

Resources