XDA IIi 2020i Input issue - MDA II, XDA II, 2060 General

Seems that whenever I select Resco keyboard or Wordlogic from the input drop down menu I always get the defualt keyboard layout and not Resco's or Wordlogic's layouts. Anyone has that issue too with XDA IIi or 2020i. I have uninstalled and reinstalled several times both but no joy . The version I use should be WM2003SE compatible but I still only get the default keyboard instead of the ones I want. The rest of the pre-installed inputs work fine.

Hey people, anybody else here has experienced such an issue with XDA or 2020i or am I alone in this.

...
I had the same problem already few times. I thing that the best way to solve is the hard-reset of the device(and data backup of course). This problem appears after I have installed some conflicting applications that damages the input-panel resource files. Ex:I've installed one buggy application and afterwards the input panels was disappeared and I was unable to type any text at the device. Hard-reset helps.

Related

Phonepad for Hermes/Dopod 838 pro

Anyone got phonepad running well?
can installed and show on the input selection,....but nothing happen when select phonepad....sme goes to tengo thumb as well......
Hi Crash74,
See attached, I hunted for about 3 weeks and eventually found this one, it is the only one that worked on my TYTN (Vodafone version)
Would recommend you remove all traces of any previous PhonePad installs.
Hope it works for you.
Any chance of a screen shot?
Thanks!
cieplowski said:
Hi Crash74,
See attached, I hunted for about 3 weeks and eventually found this one, it is the only one that worked on my TYTN (Vodafone version)
Would recommend you remove all traces of any previous PhonePad installs.
Hope it works for you.
Click to expand...
Click to collapse
i managed to find a working version from this thread...
http://forum.xda-developers.com/viewtopic.php?p=365481#365481
And direct download link as below,..
ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - International.CAB
Not sure is it the same one.....
Anyway,...thanks for the head up...
Cheers,..
Phonepad
I installed the phone pad, works like a charm. But when i click on symbol pad, it shows keyboard :S like it has been deleted, anyone exp. this as well? I like the symbol pad as well...
I had phonepad and symbolpad working... then suddenly they seem to have stopped.
Both are still in the SIP selection menu, but go to keyboard when selected (the options panels work though).
Clicking on the SIP selection menu takes about 3 seconds to come up too.
Anyone had this problem and managed to fix it?
Edit:
Actually, it's variable. On a soft reset, sometimes the pads work, sometimes they don't, sometimes only one works. M3100, if that makes any difference (probably not, from the comments above).
Ditto, same problem here, any suggestions what would be causing this?

Phone Pad App.?

A friend of mine has Compact II (Magician) and when sending texes they have a Phone Pad option aswell as the keyboard option.
But it doesnt seem to be included on the Vario II.
It looks a quicker way to send messages as the pad is big enough to use your finger and it uses the T9 input.
Does anyone know of an App for this?
Thanks
Use the phone pad CABs here, I guess this is what you're looking for.
ftp://xda:[email protected]/Hermes/Tools_and_Programs/
Hi,
does it work?
On my XDA Trion, it doesen`t work. After installing and softreset, it is available, but it`s nothing to see on the Screen.
I've installed International version in my TyTN and works fine in spanish.
I have to agree with Parazzi that I have tried installing both the English only version from this site and also the international (with a complete removal between versions) and while the option is added to the list of possible keyboards I see nothing on the screen. Could there be a registry adjustment that needs to be made?
I can not get into FTP server..can some send it to me?
I try to download Phone Pad from the given FTP link but it does not work...always server time out message. can some one help me please?!!!
any http download source?
I had the same problem, but it worked fine after a reset.
Phone Pad Desperate Help Needed!!
I searched the forum but found different tread about this but none of them with a complete and clear answer.
I installed phonepad (so I can send quick MSM with one hand) maybe 20 times in tha last week
it runs for a couple of hours then I can see it in the keybord option but cannot select it!
Even if I uninstall it and reinstall it same!
The only solution for me is to HARD RESET my device (did it more than 20 times...) and reinstall everything + Phonepad ..ok for 2 or 3 hours then it goes again!!
I might add that my device is a Japanese system running englisg UI found on this forum. Could be that the problem?
Anyone can help me out?
Is there another program or application istead of the one downloadable from this forum?
uninstall 3rd party phone dialer and using the default one.hopefully can make intellipad works fine with your phone
sankyutech said:
uninstall 3rd party phone dialer and using the default one.hopefully can make intellipad works fine with your phone
Click to expand...
Click to collapse
Hello thanks but
I do not have 3rd party phone dialer, I am using the default one (english) Or do you mean the Japanes (original system) phone dialer? As mentioned my phone originally was Japanese, I can restore that with a hard reset.
Also I foud that even the symbol pad does not work
I am using PPC for the last 5 years and NEVER had SOOO many problems If I could get back to my HP
uniostalled phonepad soft reset twice but I can still see it on the
input option but cannot select it and get this error "the selected imput method could not be loaded" could be a currupted file ?
Where can i manually delete the phonepad files?
I fuond the problem...anyone else has the same?
Ok
I dedicated my Saturday morning to my favorite hobby: install uninstall softreset hardreset sounds strange but I really enjoy
First of all I hard reset my device back to Japanese system then proceeded with installind one program at the time (first phonepad) and softreset after each installation.
I found out that if I install phonepd AND spb diary on the same driver, phonepad does not work!(at least on my device)
So I installed spb diary on my memory card and phonepad on the device memory and is working!
Also Microsoft voice command makes problems.
But unfortunatelly even if MVC is on a different driver phonepad does not work
I hope that one of the great programmers of this forum could take a look at this problem and find a way to solve it.
Will try to change my device back to English again and try the same procedure ...but not Today
Ryuerik said:
Ok
I dedicated my Saturday morning to my favorite hobby: install uninstall softreset hardreset sounds strange but I really enjoy
First of all I hard reset my device back to Japanese system then proceeded with installind one program at the time (first phonepad) and softreset after each installation.
I found out that if I install phonepd AND spb diary on the same driver, phonepad does not work!(at least on my device)
So I installed spb diary on my memory card and phonepad on the device memory and is working!
Also Microsoft voice command makes problems.
But unfortunatelly even if MVC is on a different driver phonepad does not work
I hope that one of the great programmers of this forum could take a look at this problem and find a way to solve it.
Will try to change my device back to English again and try the same procedure ...but not Today
Click to expand...
Click to collapse
Installed others programs, softreset and the phonepad ???
Gone....
Is there A NY Other Phonepad Software out there? i googled around but found nada de nada niente nix nannimonai
Ryuerik
i have japanese X01HT and have same problem with you when 1st time install this application.
after have a hard reset i installed:
-fit4cat HTweakC
-spb backup
-Breet Darnell PPCProfilesPro
-Asukal MMS Composer_Z
-Resco Today Plugin
-resco registry add-in
-resco FTP add-in
-resco explorer
-Gzh SB_usim
-HTC phone pad
and phone pad works perfectly with my device
Hello Sankyutech
I did the same as you did, with different programs...same result
On device memory:
Spb Backup
Asukal English Hermes on Japanese (and all the update and Fix)
Soti pocket Controller
Spb Pocket Plus
Spb Diary
Omega One Jurnal bar
HTC X-Button
HTC Phonepad International
On MMC
Resco explorer etc.
Voice speed dial (I love this program)
Spb Time
Virtual Earth Mobile
Opera
Declan Japanese Dictionary
Spb Time
Etc etc etc.
Installed phonepad on main memory as last program on main memory and now is working just fine!
Now I just have to delete the languages I do not use...know how to?
Will try to instal some other "non system related programs" game etc. on main memory to see what happen!
I know for sure that if I install Micosoft Voice Command no phonepad!
Anybody has phonepad AND microsoft Voice Command together?

Problem in my Trinity

Hi,
I am using a Traditional Version of Dopod D810. Everything works except i can't use any 3rd party SIP. Installation is all okay. Just when i select the that 3rd party SIP. It will goes to the default SIP in WM5. Any Ideas?
I did search for the newsgroups and did try to soft reset for several times. It didn't work at all.
Is it a Langauage problem or it is a trinity problem ?
btw: I did try nullkb and tengo. Both didn't work. I did install resco keyboard pro and it works sometimes after soft reset.
Thanks a lot
Calvin
See this post
http://forum.xda-developers.com/showthread.php?t=271008
This question is a nightmare, i´ve tried resco, tengo and others, now i´m with spb full keyboard, i have the same problem with this one cannot select but since you can assign a key to pop it up i will keep it, but this is a terrible flaw in the device.
cheers
I use SPB FullScreenKeyboard. do a search for SipChange as it will solve your problems. Worked for me.

Comma and Stop changed around

Hi Guys,
I did a google search on the forum and I can't find anything in relation to this, although I'm pretty sure someone must have seen it before.
Using a Hermes and upgraded it using Schaps WM6 ROM which works GREAT! Only one problem, initially the keyboard was all screwy, the characters weren't showing up correctly over the Q key etc. So I installed the Advanced Configuration Tool the Schaps makes and now it all works perfectly, EXCEPT the , (comma) key and the . (full stop) key have changed place. I chose the "Cingular" keyboard layout because this appears to work apart from this.
The device is a Softbank X01HT (Made by HTC)
Any information would be really great.
Thanks for your help
Cheers
Rob
RobPickering said:
Hi Guys,
I did a google search on the forum and I can't find anything in relation to this, although I'm pretty sure someone must have seen it before.
Using a Hermes and upgraded it using Schaps WM6 ROM which works GREAT! Only one problem, initially the keyboard was all screwy, the characters weren't showing up correctly over the Q key etc. So I installed the Advanced Configuration Tool the Schaps makes and now it all works perfectly, EXCEPT the , (comma) key and the . (full stop) key have changed place. I chose the "Cingular" keyboard layout because this appears to work apart from this.
The device is a Softbank X01HT (Made by HTC)
Any information would be really great.
Thanks for your help
Cheers
Rob
Click to expand...
Click to collapse
using schaps advanced config tool.. i think on the second to last tab.. change the keyboard to Japanese. then the layout will be fixed.

auto contact listing during sms

hihi,
recently installed a few apps and run into this problem.
before install apps, during NEW SMS, under TO:, i type the name of the recipient and the related listing will appear, (much like the contact search). however, after installing the apps, this function does not work.
anyone encounter the same prob? or could it be the update? i'm not exactly sure when the change happened.
i have
SK tools
HTC EZ Input T9
HTC Enlarge start menu
sony ericsson facebook panel
clifford's XperiaTweak
Zenyee X1i Youtube
Mole Youtube
SE growing panel
smaberg power button X1 12 icons
S2U2
S2v
anyone??
TIA!!
i´m not sure but i think this problem is coursed through the htc t9...
i had the same problem by installing the virtual htc tastatur
just find out by deinstalling which app is the bad one
man i removed htc t9 but problem still persist. a little time consuming to remove everything and try again. but maybe i'll try when i have the time.
thanks anyway.
I have the same problem since installing htc dialer. So I think this is the problem.
i find it comes up when using the on screen keyboards, rather than the hardware keyword.
it doesn't work with onscreen keyboard for mine.
i just realise how good the HTC Enlarge start menu is. cause the stuff is kinda small now.
i'll update you guys what causes the prob. i'm removing all stuff now.
i went to do a hard reset and install one app after another and check. finally got the answer. it is the HTC EZ Input T9 !!!
gothicia said:
hihi,
recently installed a few apps and run into this problem.
before install apps, during NEW SMS, under TO:, i type the name of the recipient and the related listing will appear, (much like the contact search). however, after installing the apps, this function does not work.
Click to expand...
Click to collapse
Just press-in the optical touch pad, under TO:, and it takes you to you're contacts.
yeah. but i don't want to scroll for the contacts. i don't like that method.
thanks anyway. but problem solved! very happy now.

Categories

Resources