Related
hey,
i need to send my hd2 back for repair but unfortunately i can't get into the bootloader! volume up / down buttons do work when im in windows mobile, but when the phone is switched off, i press volume down + power button once and the phone just boots into windows mobile.
is there any other way to restore your phone to the stock spl?
You need to press Vol UP and PowerOn, not Vol Down
skycamefalling said:
You need to press Vol UP and PowerOn, not Vol Down
Click to expand...
Click to collapse
tried that too, unfortunately not working ...
skycamefalling said:
You need to press Vol UP and PowerOn, not Vol Down
Click to expand...
Click to collapse
On my device it is PowerOn and VolDown. But I have to press and hold the VolDown button till the device is in bootloader mode.
Best regards
Pitchbend,
Taken from one of the many tutorials on here...
"*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear)".
Do make sure you are pressing the volume down button hard enough AND for long enough.
Cheers
WB
wacky.banana said:
Pitchbend,
Taken from one of the many tutorials on here...
"*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear)".
Do make sure you are pressing the volume down button hard enough AND for long enough.
Cheers
WB
Click to expand...
Click to collapse
tried it but still doesnt go into bootloader mode... i have managed to go into bootloader mode before (with several htc phones i have owned), but i think something is broken this time (my hardware sendbutton also is not working any more, that is the reason why i need to return the phone).
pitchbend said:
tried it but still doesnt go into bootloader mode... i have managed to go into bootloader mode before (with several htc phones i have owned), but i think something is broken this time (my hardware sendbutton also is not working any more, that is the reason why i need to return the phone).
Click to expand...
Click to collapse
Try running the attached EnterBootloader.exe from your HD2 (unzip, move .exe to phone, run).
JayVee said:
On my device it is PowerOn and VolDown. But I have to press and hold the VolDown button till the device is in bootloader mode.
Best regards
Click to expand...
Click to collapse
Sorry then, Vol UP has been my other phone I haven't flashed the HD2 via SD Card yet.
I just can think that you do not press the Vol DOWN button hard enough or long enough. You have to press and hold the Vol DOWN button and switch on the phone, then lift the power button while still holding the Vol DOWN button.
Hi all
wacky.banana said:
Pitchbend,
Taken from one of the many tutorials on here...
"*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear)".
Do make sure you are pressing the volume down button hard enough AND for long enough.
Cheers
WB
Click to expand...
Click to collapse
pitchbend said:
tried it but still doesnt go into bootloader mode... i have managed to go into bootloader mode before (with several htc phones i have owned), but i think something is broken this time (my hardware sendbutton also is not working any more, that is the reason why i need to return the phone).
Click to expand...
Click to collapse
This what I do to go into bootloader mod in my HTC HD2 Leo :
Press together VOLUME DOWN & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen appeared
add ; 4 all ; if for any reason while you are in bootloader - tri-coloured mod - and want to go back to normal ,
just press RESET RED BUTTON , your device will reset .
hope this will help . . .
meptik said:
Try running the attached EnterBootloader.exe from your HD2 (unzip, move .exe to phone, run).
Click to expand...
Click to collapse
thank you, with this file it went into bootloader mode, but somehow my hardware-buttons seem to be broken (in win mobile all of them beside the send-button work), when it says "Press power buutton to start update image", I press the power button, but nothing happens!
I guess thats it, no chance to restore SPL and no chance for warranty any more .
pitchbend said:
thank you, with this file it went into bootloader mode, but somehow my hardware-buttons seem to be broken (in win mobile all of them beside the send-button work), when it says "Press power buutton to start update image", I press the power button, but nothing happens!
I guess thats it, no chance to restore SPL and no change for warranty any more .
Click to expand...
Click to collapse
Hmm, very weird.
The actual keys are obviously ok - they're just not handled while in bootloader. I'm not sure what exactly is responsible for that, I assume it's not the OS, so perhaps SPL or Radio?
Not sure if it would make any difference, but perhaps you can try reflashing the HSPL (or maybe a different radio?).
pitchbend said:
thank you, with this file it went into bootloader mode, but somehow my hardware-buttons seem to be broken (in win mobile all of them beside the send-button work), when it says "Press power buutton to start update image", I press the power button, but nothing happens!
I guess thats it, no chance to restore SPL and no chance for warranty any more .
Click to expand...
Click to collapse
when its asking to install the rom (in bootloader) hold down volume up (or whatever key it asks you to press to install) REALLY HARD,
another suggestion, take off the back, the buttons seem easier to press when the back battery cover it off
maybe this will work
1. On the Home screen, slide to the Settings tab and then tap Security > Factory reset.
2. Enter “1234 ” and then tap Yes.
Ooops!
If your power button does not work it will be impossible to flash from SD card and this is the only way top reflash a stock rom = the only way to uninstall HSPL.
But if this is the power button, then how do you already power up your device ??? Is this your reason to send it to the repair?
You seem stuck in a button my friend...
g3k said:
If your power button does not work it will be impossible to flash from SD card and this is the only way top reflash a stock rom = the only way to uninstall HSPL.
But if this is the power button, then how do you already power up your device ??? Is this your reason to send it to the repair?
You seem stuck in a button my friend...
Click to expand...
Click to collapse
it is a real wierd problem, i can switch the phone on with the power button and when it is turned on, all keys work beside the talk(send) button. but i can not go into bootloader mode and power button / volume down button to confirm / cancel update when entering bootloader mode with bootloader.exe don't work.
you should really try to reflash radio and hspl again. if you can power on the device the hardwarebutton must work. looks like a software problem...
have you check that you vol down button is working? it happen to me before,
maybe you could contact the hspl maker if he can help you? i have in my mind that he could "hack" the procedure to NOT ask for SEND key press?
Thanks for all your replies. I left the phone off for about 4 hours charging. I switched it on press the vol down button and it worked! How weird / lucky. So I flashed a new rom and I am working again.
Thank you so much for you time.
One last thing though, now in WinMo the vol up and vol down work and the power button work. But the other 4 hardware keys don't, they just force the phone into vibrate/silent mode. When I get a phone call it also turns the volume down/off/vibrate.
Maybe a hardware failure?
Matt
how to enter in boot loader mode htc mega?
i don't find any info about this phone
Bootoader-Mode
alfamobil said:
how to enter in boot loader mode htc mega?
i don't find any info about this phone
Click to expand...
Click to collapse
Device OFF: Press and hold volume down and press end call Button.
Device ON: Press and hold volume down and and press soft reset button with the Stylus.
Sorry for my English..
Chriss1983 said:
Device OFF: Press and hold volume down and press end call Button.
Device ON: Press and hold volume down and and press soft reset button with the Stylus.
Sorry for my English..
Click to expand...
Click to collapse
tks for more. i found it about 30 mins )
While the phone is off hold down "Volume down key" and the "power button"
*use volume keys to go up or down
*fastboot is locked so there is no options available besides "fastboot reboot"
*boot into recovery "option"
Just thought I'd post for you all to know this.
*ID*
IncredibleDoes said:
While the phone is off hold down "Volume down key" and the "power button"
*use volume keys to go up or down
*fastboot is locked so there is no options available besides "fastboot reboot"
*boot into recovery "option"
Just thought I'd post for you all to know this.
*ID*
Click to expand...
Click to collapse
Thank you. That seems to be the same on all the HTC's. I used that method on a MyTouch 3G
also while off hold down the opical button and press power u will access it too
you should update the original post. either optical button or vol down to enter bootloader for one and...
once you are in bootloader do this.
-press vol down to hover over recovery
-press power button to select recovery
-once you reach screen with exclamation and device hold volume up and press power
you can now wipe device or flash an update
bootloader
i got to the screen with recovery on then i hit the power button again and another menu screen came up that has the bootloader options on it.
IncredibleDoes said:
While the phone is off hold down "Volume down key" and the "power button"
*use volume keys to go up or down
*fastboot is locked so there is no options available besides "fastboot reboot"
*boot into recovery "option"
Just thought I'd post for you all to know this.
*ID*
Click to expand...
Click to collapse
I did this accidentally yesterday turning on my phone. It freaked me out for a moment reminding me of the screen that came up when I leak-updated my Eris. What's "fastboot reboot" for?
thanks for this great mod !
I installed it successfully, and my questions now are:
1) to get back to my old system, i just have to boot into GoAPK ClockworkMod Recovery, wipe cache&data and restore the backup i made? or do i also have to flash a sbf-file with RSD Lite?
2) (updated) google maps : rotation doesn't work, is that normal (defy not a supported device) ?
thanks for your help
IncredibleDoes said:
While the phone is off hold down "Volume down key" and the "power button"
*use volume keys to go up or down
*fastboot is locked so there is no options available besides "fastboot reboot"
*boot into recovery "option"
Just thought I'd post for you all to know this.
*ID*
Click to expand...
Click to collapse
Thank You!
Bloody Hell!!!!!!!! 2 hours of searching for an answer to my obvious question. a mass of posts talking about booting in this that and whatever other way to do this, that and...... yet not one bothers to divulge the most fundamental of informations. HOW!
Les1976 said:
Thank You!
Bloody Hell!!!!!!!! 2 hours of searching for an answer to my obvious question. a mass of posts talking about booting in this that and whatever other way to do this, that and...... yet not one bothers to divulge the most fundamental of informations. HOW!
Click to expand...
Click to collapse
Jesus, relax lol.
Hi guys,
I have rooted successfully..
I also patched ClockworkMod successfully through Odin...
But what is the key combination by which i will be able to go to CWM???
Cheers!!!!!!!!!!!!!!
Turn off the tab and turn on with power button + volume up.
and if doesn't work add the home button to the previous combinaison (by samcortez)
GT P1000 : If I helped you, please press the thanks button ;-)
thanks samcortez,,, am able to go to CWM,,,
I am using vol up and down to move through options,,, how to select one of them??? Power button is not working to select them..
Yeah i found it...
mac4rfree said:
thanks samcortez,,, am able to go to CWM,,,
I am using vol up and down to move through options,,, how to select one of them??? Power button is not working to select them..
Yeah i found it...
Click to expand...
Click to collapse
For select one i think that is the button on the left, i dont know, try all the no phisical buttons (home, back, search, etc.)
the selct button is Search ou menu.
Sometimes i have noticed the power button stops working I think because it goes into an alternative select mode or something, its expecting you to hit the home button instead. Weird but true.
If you inadvertantly hit the pwr button and are presented with a blank screen just hit the pwr button again and you will be back in CWM. On my device the settings drawer key ( hardware key all the way on the left) is the "execute" key. The back key also functions to go back in CWM screens. Vol +- navigates menu choices.
I ask touched dell streak camera key did not respond in Recovery Mode, but after shutdown, press and hold Power + Camera, you can enter the Fastboot mode ..... only in the Recovery the mode, the Camera the key did not respond ...
Sorry my English is not good, is Google Translate, hope everyone can understand Orz ....
will not respond at all if your 5treak is shut down/off.
try this : turn on, when dell logo appear - quickly press& hold camera button (fastboot) or vol -+ button ( recovery)
ivantastic said:
will not respond at all if your 5treak is shut down/off.
try this : turn on, when dell logo appear - quickly press& hold camera button (fastboot) or vol -+ button ( recovery)
Click to expand...
Click to collapse
In fact, my situation is in Recovery Mode, you can use the volume + / - move option, but press the Camera Key, but can not the select, but the Camera Key failure .... do not know that there is no one touched sothe case
Lyz said:
In fact, my situation is in Recovery Mode, you can use the volume + / - move option, but press the Camera Key, but can not the select, but the Camera Key failure .... do not know that there is no one touched sothe case
Click to expand...
Click to collapse
you use the soft button menu (middle) key to select in recovery, and soft button back to go back
hope it helps
asianftw said:
you use the soft button menu (middle) key to select in recovery, and soft button back to go back
hope it helps
Click to expand...
Click to collapse
menu (middle) key can not be selected .... if that is in this mode, lose the selected function first run into this the Dell ......