Earlier today I received a Spectec SDW820 SDIO WiFi card. All installed and after a little grief, its working. (helps when you switch Radio on).
I usually Sync over bluetooth, but was wondering if WiFi was an option. Has anyone succeeded??
Yes works very well.
Make sure that a profile in Active sync exists on your PC, which it should if you are using bluetooth presently.
If you use your wireless connection to access the internet, say through a wireless access point, your wireless card will be set to 'The internet' under 'Network Cards' found under 'settings' and 'connections'. Now change this to 'Work' instead.
Then under activeSync on the magician select tools then options.
Make sure that your pc that you will be syncing with is listed under 'use this PC:'
Then simply hit the 'sync' icon on the activesync front screen on the magician, and activesync on your PC will automatically start and sync your magician!
If i remember correctly the only problem that I encountered was with my network. I had to set up a wireless network via my wireless router using my xp laptop that had activesync that I wanted to use. I just used the xp wireless wizard for this.
I never activesync using the cable or bluetooth now.
Related
Hi everybody, I've just recieved my wireless LAN card and I'm having troubles finding documentation on how to do what I want to do. I actually want to do three things with my PDA once WiFi is working.
A I'd like to be able to ActiveSync through WiFi instead of connecting the cable. My laptop has a wireless LAN card, but I don't know how or if I need to set up a special connection between the two.
B I would like to be able to connect with my Magician through my laptop, so I can use its internet connection on my Magician.
C My Magician should also be able to connect to a wireless access point at my college, maybe I can have two network settings on my Magician so I wouldn't have to switch between them all the time?
Thanks very much from a Magician newbie .
Alright, scrap B, I managed to do that but I had to turn off WEP... If anyone knows how to keep the connection secure, let me know . But syncing still doesn't work via WiFi.
Edit: Scrap A as well, with a little bit of tinkering I think I got it done .
I can get all the items working but using my Wi-Fi network and not an Ad-Hoc.
All you need to do is go into Settings>Connections>Connections>Advanced>Select Networks> Here you select the "Internet" for both. This way you I use IE or email etc it connects into the internet and when I select Active Sync it also connects via the internet setting where it see's my "ActiveSync" running on my PC and connects. Make sure the tick box is tick against "Allow Network" in the activesync settings.
As for the Work side of things i dont have a wi-fi network but from memory once you set up the "Network Cards" on your PPC it will connect to which ever one it see's first, someone correct me if I'm wrong please.
ampda said:
I can get all the items working but using my Wi-Fi network and not an Ad-Hoc.
All you need to do is go into Settings>Connections>Connections>Advanced>Select Networks> Here you select the "Internet" for both. This way you I use IE or email etc it connects into the internet and when I select Active Sync it also connects via the internet setting where it see's my "ActiveSync" running on my PC and connects. Make sure the tick box is tick against "Allow Network" in the activesync settings.
As for the Work side of things i dont have a wi-fi network but from memory once you set up the "Network Cards" on your PPC it will connect to which ever one it see's first, someone correct me if I'm wrong please.
Click to expand...
Click to collapse
Hi, my spectec suddenly stopped working. The list show my wifi as available but am unable to go on the net. I have tried reinstalling the driver, doesn't work. This started yesterday, I have not changed or install anything else. Could it be a faulty card or faulty mini ? My wifi is working great on my notebook. WEP is off. What else can I do ? Thanks.
If all fails I try a hard reset and only install the Wi-Fi driver and go from there.
Do a complete backup with say Sprite Backup that way you can restore your PDA back to original.
The other option is to use the modified driver from the E300 Card found in this post
http://forum.xda-developers.com/viewtopic.php?t=27069&highlight=spectec+e300
But you need to uninstall the SPECTEC driver first.
Thanks ampda. Have uninstalled the spectec and will use the E300 as suggested. See how this works. Will only go to hard reset as a last resort or perhaps just wait for the universal ??? :lol:
Thanks ampda. Have uninstalled the spectec and will use the E300 as suggested. See how this works. Will only go to hard reset as a last resort or perhaps just wait for the universal ??? :lol:
Hellow, can you learn me how to connect active sync via wifi please ? Thank you. I have that same card
Alright, on your PC ActiveSync:
- File -> Connection Settings. I marked the USB and Ethernet options.
On your PDA:
- Start -> Settings -> Connections -> Network cards. Here select the network your PDA should connect to. It should connect to "The Internet", on the tab "Network key" I have selected Open and Disabled, because I use an ad-hoc connection.
That should do it, just hit sync on your PDA !
You may have to disable and enable your wireless connection on your PC to get things to work.
Slofsky said:
Alright, on your PC ActiveSync:
- File -> Connection Settings. I marked the USB and Ethernet options.
On your PDA:
- Start -> Settings -> Connections -> Network cards. Here select the network your PDA should connect to. It should connect to "The Internet", on the tab "Network key" I have selected Open and Disabled, because I use an ad-hoc connection.
That should do it, just hit sync on your PDA !
You may have to disable and enable your wireless connection on your PC to get things to work.
Click to expand...
Click to collapse
File -> Connection Settings. I marked the USB and Ethernet options.
On my active sync 4 i don't see ethernet options[/b]
I'm using version 3.8 and I see that option :O! Here, let me take a screenshot for you.
ActiveSync 4 has no syncing over network, it has been taken out. Go back to 3.8 if you wanna use it.
Private-Cowboy said:
ActiveSync 4 has no syncing over network, it has been taken out. Go back to 3.8 if you wanna use it.
Click to expand...
Click to collapse
OK thank you
You know MS developers have o get AS4 ready for the WM 5.0 release because WM 5.0 needs AS4. They were a little lazy so they got deadline problems and have to take network sync out for now. They will put it back in in a future update but AS4 as well as AS4.1 dont offer it right now.
it don't ghet it to work
I got my new Jamin phone all set up - cofigured ActiveSync with exchange and it worked via usb just fine. I then configured the Media Net Settings and testes wireless sync. All works great.
Then I attempted to connct back to the PC via the USB and then activesync couldn't sync with exchange. It seems I have to go in and change the setting "Programs that automatically connect to the internet..." to use My ISP instead of Media Net. I gues because media net uses a proxy which can't be found when connected to the PC.
Is this normal? Do I really need to change the setting each time?
Thanks,
Mark
Just as the title reads, I'd like to know if there is a way to have ActiveSync enabled while at the same time piping all data traffic using GPRS.
I use Pocket Controller which requires ActiveSync to be used. The problem is my internet connection associated with my computer is always loaded with data traffic. I use my K-JAM for IM applications and would much like for it to connect to the internet via the GPRS connection I have.
I have discovered that after the Pocket Controller establishes a connection with the K-JAM, if I disable the ActiveSync connection by going to Connection Setting and unchecking the "Allow USB Connections" check box, Pocket Controller continues to work, while at the same time I am able to use the GPRS connection on my PDA.
The problem with this is that, everytime I disconnect my K-JAM and reattach it, I have to enable the "Allow USB connections" option, then let ActiveSync detect the K-JAM only after which Pocket Controller will detect the K-JAM and then disable the "Allow USB connections" option again for GPRS to work.
I hope sombody can shed some light on this.
Upgrade to Activesync 4.5.0 Beta (works fine as far as I can tell, been using it for a while now) and you can select for the phone to continue using the radio while connected, it's just a check box.
Thanks for that bro. I'd much rather avoid any Beta versions. Tell me, would you happen to know if ActiveSync 4.2 supports this feature???
Also, I don't really use any Sync Features. The only reason I use ActiveSync is because I need a way to interface my K-JAM to the computer and install programs... that's about it. So given this situation, will ActiveSync Beta perform ok???
leepriestenator said:
Thanks for that bro. I'd much rather avoid any Beta versions. Tell me, would you happen to know if ActiveSync 4.2 supports this feature???
Also, I don't really use any Sync Features. The only reason I use ActiveSync is because I need a way to interface my K-JAM to the computer and install programs... that's about it. So given this situation, will ActiveSync Beta perform ok???
Click to expand...
Click to collapse
Use the beta man... no biggie.
Well as per your instructions, I used the BETA version v4.5 BETA 2.
After installation, I looked up the connection settings, and there is a check box which reads "Allow wireless connection on device when connected to the desktop"
Unfortunately, even though I have checked it, once I connect my K-JAM to it and go back to connection settings, the option disappears and just like with the previous versions of ActiveSync, I can't seem to use EDGE / GPRS while ActiveSync is enabled.
Can someone please help?
TIA
Well...try active sync 4.2! Because in my case it does it even though I don't wish to. There is no more Internet Pass Through, so GPRS connection is started as soon as I try to access a web page.
I actually would like to know how to stop it! I will maybe try 4.5 as the registry hacks I found for 4.2 don't work.
Easist way i got it to do that a while ago (when i didn't want it to ) was to set the network card as a "Work" connection.
Start -> Settings -> Connections -> Network Cards -> change "The Internet" to "Work" and try...
All from memory so post your results
I finally figured it out.
The ActiveSync didn't seem to work. Everytime you connect the Wizard to the computer, it is assigned an IP (in my case it is 169.254.2.1). In the Pocket Controller settings, set it to connect via TCP/IP and punch in the same IP address. You can have ActiveSync disconnected. Pocket Controller will connect to the Wizard and you can use GPRS to access the internet.
Ok well i have been connecting my 8525 via Bluetooth PAN for a little while now for internet connection in my car computer. But all of a sudden it doenst work anymore. IN the internet sharing it says that it is connected and on my computer it says its connected but i cant load any webpages. When i double click the bluetooth connection on the computer it says that data is only being sent and nothing is being received. It also says that the signal it very strong... What could be the problem? O and the phone has a connection via 3g...
The latest "official" 8525 ROM has a 'Proxy Manager' where you can enable/disable the AT&T Proxy. Ensure that it is disabled, the proxy won't work on a WiFi or LAN connection. If your ROM has this, it will be listed under Start | Programs.
Otherwise, ensure that you're not using any other proxies.
Also, look at the Activesync settings on your PC, some older versions of Activesync have a setting to disallow the PDA access to the network.
Hello All,
Here is my problem and I need help.
Situation:
Laptop WinXp is connected to Internet via cable modem.
Now I want to make access to Internet via Wi-Fi from laptop for WM 6.5 device.
I manage to connect and browse Internet with other laptop via laptop connected to cable modem –internet. WM device is showing connected to SSID but Internet doesn’t work.
Internet access via ActiveSync and USB cable is working perfectly but via Wi-Fi doesn’t
After many hours browsing various forums I couldn’t find any good working solution.
Any help is highly appreciated.
Regards and Thank you.
zoran974
ACER S200
Please find attached.
How can I at least connect WM6.5 using Laptop's Internet?
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??
samalam said:
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??
Click to expand...
Click to collapse
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?
Undoubtedly, technology problems hold you and your company back. That's not good for business and as such it's a great idea to get the problems fixed quickly. For several small companies, small business computer support isn't confined to one person within the company; rather, it is tech support that is called in.
==================
Project Management Software
patrick_spd4u said:
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?
Click to expand...
Click to collapse
I tried and that did not work. Is there any body who got this working, if not in company settings, what about in home settings??