my jam dead - JAM, MDA Compact, S100 General

in the evening my mobile stopped with red light and no serial on screen.
i need help.

firaszeitoun said:
in the evening my mobile stopped with red light and no serial on screen.
i need help.
Click to expand...
Click to collapse
Charge your battery

i tried
no its something in rom
and nothing on screen
so i cannot install any rom.

yours is really dead...
this problem can be solve just by replacing the mainboard, thats mean buy another one... or take it to your service center and act like you dont no what happend, thay may replace it for you as under warrantly.
NiGhTmArE

i had the same problem. But i've noticed that this happens when the back cover is off. i put it and everything works fine. when i take it, it doen't power onr, and i got a red led.

Related

I think my Hermes is dead :(

Was working fine this morning, alarm went off etc and checked my mail. Put it into my pocket to read on the bus, got it out and it wouldn't come out of sleep mode. So tried reset with the stylus, no luck, so then pulled the battery and powered on.
All I get now is the green light coming on and staying on and that's it nothing else. I've got Hard-SPL the last released version and Shamanix Ultimate rom which has been fine for the last few months. And yer now this.
I've tried removing the sim card, the storage card and plugging it into windows. It detects something, brings up a network device but then I get nothing after that. I've tried using RUUWrapper to flash another OS rom but it still won't go. (This only happened once)
*Update* Somehow after plugging the usb cable in and holding power and the ok button to get the tri colour screen (even though its staying black) it managed to attempt to flash a new image to my phone. It said it was successful but its still not booting. I'm going to try and reflash the radio and hard spl but any other ideas? I tried looking for mtty to go through that way but no luck.
i had the same problem like you any help oli, pof or any one who could help to come back our hermes??
you sure its even a software problem? it seem to me like a hardware problem, like ur lcd screen is dead or something. i would try a remote control app like mymobiler and see if there's anything there first
XtreMe_G said:
you sure its even a software problem? it seem to me like a hardware problem, like ur lcd screen is dead or something. i would try a remote control app like mymobiler and see if there's anything there first
Click to expand...
Click to collapse
Could be a hardware issue but I don't think its the LCD. The lights to indicate bluetooth aren't flashing which I had on by default. Its also not even flashing the green light at this point. It sorta powers on but thats it.
*Update*
After a bit of time the light did start flashing green but no bluetooth. The red and green phone buttons also turned on (Dopod 838 Pro). Its also now appearing to charge off the USB. But still no link in windows. I can ring the phone but nothing happens, it rings in the phone im using but the mobile itself does not.
well in my case my device if i plug it in the charger it charges but no led indication if i turn on the device only the green led turns on but it stays no start of splash etc etc etc only i can put it in bootmode if i flash it dont makes nothing
Well I dropped the phone into the service centre. It is 11 days (taking into account the leap year) outside of warranty. I'm kinda annoyed because the tech there said 3 would normally replace/repair under warranty at 10 days out of warranty.
Either way i've got a quote of $140, they claim its the screen but didnt have a screen in stock to test so i'm waiting for that. Three may still cover it under warranty because its so close to the warranty period and well i've had a few billing issues with them before where they were at fault. Namely the charged my credit card which they had been for over 6 months with no issues and then claimed I had not paid them. It took two weeks and multiple complaints before they accepted my bank statement showing them it was paid.
Still waiting now at almost a week and a half but hopefully its just the screen and they will fix it for me. They were hesitant to but I believe they will cover all of it, at first only offered 50% of the cost which is a bit of a kick in the teeth when its so close to warranty and under statutory warranty it should be covered.
Will keep this updated.
so has anyone figured out a reason/solution to this issue?
Unfortunately no
Once three got the parts in and tested them in my unit they were still unable to get it to boot nor get into some kind of special boot diagnostic mode they use so it was declared a complete board failure and deemed uneconomical to repair.
As it was so close to warranty they are now trying to sort out what they can do, possibly a loyalty upgrade or something similar. I've given them ideas of what phone I would like to get and hopefully they can accommodate me else I will look at chasing the statutory warranty angle.

Qtek 9000 strange white screen

I just got a Qtek 9000 which only shows a white screen. Initially it was completely dead, and only showed a red light when I connected it to a charger. But after reading for a while on the internet, I managed to flash an original rom onto the phone. But the screen is just white when I power it on. The phone seems to be in working order, because after about 30-40 seconds after I've powered it on, I get the "beep sound" (that comes after installing a new rom onto the phone and you're supposed to calibrate the screen etc)
I've tried flashing the rom again, but the screen still stays white.
Has anyone encountered this problem before? Do I need a new screen?
Oleq83 said:
I just got a Qtek 9000 which only shows a white screen. Initially it was completely dead, and only showed a red light when I connected it to a charger. But after reading for a while on the internet, I managed to flash an original rom onto the phone. But the screen is just white when I power it on. The phone seems to be in working order, because after about 30-40 seconds after I've powered it on, I get the "beep sound" (that comes after installing a new rom onto the phone and you're supposed to calibrate the screen etc)
I've tried flashing the rom again, but the screen still stays white.
Has anyone encountered this problem before? Do I need a new screen?
Click to expand...
Click to collapse
Before you buy a new screen try to READ the Wiki, perhaps you can find a solution there
Good luck
I can't find anything anout it on wikipedia. Any other suggestions?
Well, I think I have narrowed it down to one of three possible things that can be causing the fault. I've disassembled the phone and tried powering it up with only the screen connected and I've disconnected all other ui modules and speakers and mic.
Still the screen stays white, so I think the problem must either be with the screen, the flex cable that runs between the two "pieces" of the phone, or the ui module that connects the screen and the flex cable.
So does anyone know where I can get these, or some of these parts cheap? New or used, or perhapse someone's got a faulty phone they'd like to sell?
Oleq83 said:
I can't find anything anout it on wikipedia. Any other suggestions?
Click to expand...
Click to collapse
It´s not on Wikypedia, I said The Wiki here on XDA Devs:
http://wiki.xda-developers.com/
Good luck
Thanks, but I can't find anything about it there either.

Legend dead after rooting

I have tried rooting about 5times with excellent results, this time it did go well for a beginning. I flashed the rom and the phone said success and wanted me to reboot. Then a image with a phone laying on the stomache with light on a greeen symbol with (!) in a triangle came up. Now my phone is dead =( plugged in to the computer dosn´t even work. Not even the powercable. Whats should i do? is it broke? Help! plz!
colors said:
I have tried rooting about 5times with excellent results, this time it did go well for a beginning. I flashed the rom and the phone said success and wanted me to reboot. Then a image with a phone laying on the stomache with light on a greeen symbol with (!) in a triangle came up. Now my phone is dead =( plugged in to the computer dosn´t even work. Not even the powercable. Whats should i do? is it broke? Help! plz!
Click to expand...
Click to collapse
yup..i thought of rooting my phone, but now
Have you tried pressing the Volume Up + Power button to get the recovery menu? I would try that first.
like i said before.. the phone is completely dead. I have tried it all, nothing can power it up. It doesn´t even feel the powercable.. the orange LED isnt on. I think its very strange that no one else have had this problem.
is it a h/w issue?
or have you resolved the problem already?
When the picture of the phone laying down with the triangle was up you didn't pull the battery did you?
I have got the same problem after updating to another rom. But the rom was defect or it didn't show progress in 5 min time. So I (stupidly) deciced to pull the battery from the phone.. and now I can't turn it on/charge..
please tell me if this is a fixable problem?
Brooks316
Yes, unfortunately i did :S i tried all buttons and it didnt help so i pulled the battery, what went wrong and what would the proper solution be? it said sucess when i flashed it and then the screen jumped up and it was already to late :S
I havent fixed the problem but it´s taking care of. I have it on service so in 1-2weeks i will get an answer.
Hi guys! Thought you might want an update with my problem.. i picked it up from the serviceplace today and thanks god it was an warranty thing. They said the mainboard was broken and replaced. Thats like the motherboard on a computer, correct? Can a f*cked up rooting/flashing be the reason?
Hey dude, i am guessing they replaced the mainboard because the chip that stores the rom has been courupted, they wouldnt have been able to diagnose it or replace the chip so must have been easier to replace the whole board haha. Your lucky they couldnt tell you had gained root on it!

My Acer NeoTouch s200 is dead

Hi im from Germany,
i tried to flash my Acer S200 but it stopped by 50% and i have pluged the cable out. I cant turn it on, it gives no signal, i cant bring it to the download mode. Nothing is working no hardreset with buttons.Nothing is working and when i plug it to usb the LED isnt blinking
Sorry for my bad english ..
my phone is new, it has garanty, should i contact the acer support or can anyone help me ?
Hold volume up/vol down button + reset until you see "clean boot"
i tried it the phone gives no signal .. no clean boot is coming .. the rom flashing was at 50% i think it is breaked
but thank you
did you try removing then replacing the battery. then try bootloader mode again?
yes i tried but nothing is working i cant enter the bootloader nothing is working it is just off no vibration nothin is working
sorry, but I have to ask, are pressing then holding vol down +power +camera buttons
at the same time until blinking red light starts?
you have to get into bootloader mode then flash a custom rom
brainmaster has a few including a "clean" rom.
I had this happen awhile ago and tried so many things for 2 days that now I don't
remember what actually worked! But I don't think that your S200 is bricked.
Also, make sure that you keep the power cable pluuged in (not usb)
you need a good charge even if you don't see the green light.
just keep trying and if I can remember I let you know.
or someone here will help you to find a solution!
thank you for your help but there is no light blinking. Also when i plug it to charge no light is going on. it doesnt charge the battery. i hope you can remember
i already know how to flash a rom but the phone doesnt give any sign
sorry I can't remember but you should ask brainmaster and maybe he can really help.
And he speaks german= )
thank you i will send him my problem
Any solution
Hi. I kind of found myself in the same situation. My acer s200 is unresponsive, no blinking lights no matter key/reset combinations. Had been in the middle of flashing on a new ROM when it got accidentally disconnected.
Any possible solution? Already checked the battery out in a different phone and it's fine and charged.
Hey,
i don't want to looks like a vultur, but if some of you can't find a solution to resolve the problem you have, I'm interested by the device because I need some piece. Of course I hope you can resolve your problem but if there are no led blinking, the last possibility is to send it to acer, and if you don't want to wait/pay/or whatever to with the acer support, I'm interested by your device.
Arto
Vulture indeed!! I'm need of help man.
you still need help?????
Hey GarcoG. Yes, still in need of help. My S200 is currently a desktop paperweight at home. It's a beautiful paperweight but it was made for so much more. Would really like to get it up and running again.
A new thing I noticed. I'm able to charge my phone's battery to full on my friend's s200. Of course when I put it back into my phone, it's still completely unresposive. However, I noticed that whenever I put it back into my friend's phone, the charge on it has reduced. I'm pretty sure it's not a battery issue I have since my phone is still unresponsive with my friend's battery in it and the same happens with that battery as well.
Would really appreciate any ideas on fixing this.
Hi, count me in. I just jumped on your wagon.. will try to disassemble this beauty soon before I officially demote it to a shiny paperweight.. well it's not that shiny, i put on a matte screen protector on it
Really funny about that matte screen protector. Cannot wait for the results. In my case, phone got accidentally connected just as it had reached the stage of flashing on the new ROM. Was thinking it was probably unresponsive because the ROM instructions that enable it respond to key combinations are absent hence cant get it into Bootloader mode.
@ incognito_tkd: Any luck with the disassembly? Would like to know your findings.
I have same problem... same situation
But... when I connect my USB charger, it shows red LED on... as if the charging is ON. But no reaction
Any one help please
there is no possibility to repair the phone... you have to send it to acer !!
i got my phone 1month after i´ve send it

[Q]Thin blue line on screen

Today morning wokeup with a bright day,
I saw my phone working normal
I have mahdi rom on my phone..
But theres no issue with rom or any mod is what im sure about..
I looked at my phone..
And im having a very thin blue line on the right of the screen which is probably a hardware issue as it doesnt get captured in the screenshots..
And my power button doesnt work anymore any better.. After fighting with it and has been same since 6 months.. It works..
And the line came from today morning..
When i boot the phone its in red at google logo and fades away n when completes the boot.. It comes from start with blue everywhere on screen..
I have been using the phone like 2 years and so please help me with the problem if anyone else may have came across
Do a factory reset and report back! ?
it does appear even on the twrp,bootloader and even on boot logo of circles too,
so will a factory reset solve it?
sid21 said:
it does appear even on the twrp,bootloader and even on boot logo of circles too,
so will a factory reset solve it?
Click to expand...
Click to collapse
I don't think so, it is probably a hardware issue. Maybe you can check the inner parts of the phone or send it to a repair service. It seems like the connector between the motherboard and the screen is the reponsible.
TheDeathlord said:
I don't think so, it is probably a hardware issue. Maybe you can check the inner parts of the phone or send it to a repair service. It seems like the connector between the motherboard and the screen is the reponsible.
Click to expand...
Click to collapse
Thank you for the reply,
Hope its just a connection problem cause i cant afford screen right now.. I have used my phone with soo much care and yet this happening is very sad for me..

Categories

Resources