I WAS PERFORMING AN UPGRADE ON XDA1 and got and error and the suggeation was to reboot and that the pgm would recover. Whoever wote these programs must have been in LA LA land when he/she wote them. Now my XDA1 shows only an OS version when it boots and no radio stack. When I now want to reflash with the help of the SD card I do a soft reset power button ritual and get a GSM error and no option to load from the SD. Does anyone know how to get out of this mess? Please give me detailed instructions if yo do
I have a similar problem. i flashed, but it must have failed or been bad versions. i write to the sd but it doesn't boot. i tried the wallaby bootloader but either i scrod the pooch, or it isn't working. if i let it boot, it halts at white screen with top blue strip. if i leave itr go, it reboots after a while and the cycle starts again. i have v5.17 bootloader onboard.
Help!
Since my post I have given up trying to fix the device myself and have sent it to Siemens here in Canada. For a fee of 35$ can they will reflash my phone if that is all that I have screwed up. I have also found out that for the SD card to be recoconized with a new ROM it must be loaded on the card with OSItools. Otherwise it won't. I am using bootloader 5.15
Hello everybody,
i have major problems after trying to flash bepe rom 0.66. The rom before flashing was bepe 0.59. The flashing finished fine, but after automatic restart, the windows mobile failed to boot, it stuck on green WM6.1 screen. After all, i tried to hard-reset my device, but nothing helped.
I can enter bootloader, but it is bootloader version POLA200 SPL-1.25.0000. When i try to flash ram, the flashing stucks at 0% and the error 262 occured.
So i have no idea what to do, and how i can reanimate my polaris. I have some questions, in another thread i have read that it isnt possible to flash the rom with this bootloader, i have to install the HardSPL, but i dont know how i can install hardSPL?
Another question is, can i flash the original rom without hardSPL?
Incubant said:
Hello everybody,
i have major problems after trying to flash bepe rom 0.66. The rom before flashing was bepe 0.59. The flashing finished fine, but after automatic restart, the windows mobile failed to boot, it stuck on green WM6.1 screen. After all, i tried to hard-reset my device, but nothing helped.
I can enter bootloader, but it is bootloader version POLA200 SPL-1.25.0000. When i try to flash ram, the flashing stucks at 0% and the error 262 occured.
So i have no idea what to do, and how i can reanimate my polaris. I have some questions, in another thread i have read that it isnt possible to flash the rom with this bootloader, i have to install the HardSPL, but i dont know how i can install hardSPL?
Another question is, can i flash the original rom without hardSPL?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=1983845&postcount=4
i have tried this, but it changed nothing, always stuck in green WM6.1 Screen or by 0% flashing with error [262].
I'm not sure it works but you can try flashing hardSPL by microSD.
Take a microSD and format in FAT32, rename RUU_Signed.nbh in POLAIMG.nbh, insert microSD in Polaris, put it in bootloader, press the power button, it takes some seconds to start, wait.
If it works you can after flash the ROM with the same procedure.
Thanks for all replies!
This is a good idea batista, but i have some questions to this procedure.
Which rom would you take? first hard-SPL and after that a cooked rom?
How i can see that it works, cause you say you dont know wheather it works? Have you made experience with flashing from micro-SD?
Flash before HardSPL and after a ROM, i've Bepe 0.65 ITA.
You can see if it works if after you can flash a ROM, i've never flashed by miscroSD 'cause i've a PC with XP and i prefer to flash via usb but a lot of
people use to flash via microSD.
Trying to flash rom from microSD, has no satisfying effect as well. It stucks on a white screen with blue label "Loading...". Maybe its because 8GB microSD card and it is not able to load a rom from that one.
Please, i am happy about every post. Because i wont have destroyed 450 €
Do you format microSD before ????
Can you try with another one ????
If in FAT 32 doesn't work try in FAT 16.
No i cant try it with another one, but ordered another one on amazon, so on wednesday i hope i can try with another one. Formating with FAT16 is also impossible, i have no such choice in windows XP, but i think FAT32 would be the right one.
I think the main problem is, i have not installed hard SPL, but i dont know how to install without connection to windows xp. And i havent found any thread where it is mentioned to install hardSPL without connection to windows xp.
Have You tried to flash hardSPL via microSD or not ???
Same procedure of ROM flashing.
yes both hardSPL and direct bepe 0.66 but none of them worked. both stucking on loading... screen. Maybe there is a problem with 8GB hc micro sd?
Remove microSD and SIM and try flashing hardSPL via PC with Polaris in bootloader.
i also tried this, but it stucks on 0% updating and on windows xp the 262 Update Error appear. I will give this one a retry tomorrow. But i am not very hopefull.
I'm really sorry, i hope someone has a solution for your problem.
another user named sassa80 had exactly the same issue like you. he did not HardSPL first and tried to flash a new radio rom. the story ended with a RMA return of his HTC.
Hi Incubant,
You may try to flash an *original* ROM renamed to POLAIMG.nbh trought microSD. I used that procedure with a Sandisk 16GB, FAT32 and it worked ok. Before that, mine were kind of bricked on the SPL loader.
I think the step I may have missed the first time was to unplug and replug usb cable the first time I run the update on windows, right after the reset when on the palm screen it said to do so (after all on windows, the application were telling to *not* unplug the cable for 10 minutes). Anyway, if I recall correctly, I failed to update the SPL and at the end of flashing a beta of 6.1 it stopped at 99%. So... I was stuck - couldn't reflash anything. Nevertheless, the procedure that I mentioned on the first paragraph did solve it. After that, I had no problem installing the HardSPL and any other ROM.
Good luck
Another one here with the same problem.
Tried everything I can think of and still stuck on the 6.1 boot screen.
The people who are having problems above with the latest flash e.t.c, which brand of device you using? XDA Orbit II?
For me, it's an O2 Orbit II.
~J~ said:
For me, it's an O2 Orbit II.
Click to expand...
Click to collapse
I thought you might say that, I also have an XDA Orbit II and have noticed a different set of behaviours under the same conditions as compared to the HTC Touch Cruise users. It appears that an Orbit II and a Touch Cruise are both a Polaris but an Orbit II is not a Touch Cruise if that makes sense. Apart from the quite apparent visual differences between the two, are there any internal differences we are not aware of? The Orbit II always appears to act differently, some tweaks/roms/advice have outcomes different to the touch cruise, especially certain reg tweaks.
From using the latest bepe ROM it appears to be quite buggy, also reported by other users, look at bepe ROM thread. Hopefully bepe which deal with the bugs because his ROM, in my opinion, is by far the best.
I too had the STUCK-AT-GREEN-SCREEN issue when I flashed the latest ROM, I waited about 5 minutes, then HARD-RESET, then when presented with the GREEN-SCREEN again for a few minutes, I pressed one of the upper buttons (green phone / red phone).
I hope you sort the problem out.
I am afraid my Polaris bricked, but I hope somebody knows a solution. Let me explain:
I turned off my device to get my microsd card out. I put the card in my cardreader to fill it with a lot of music. After that I inserted the card in the polaris, turned on the pda, and I got into the bootloader screen .
I tried to soft reset: bootloader screen again, tried to hard reset: bootloader, tried to flash original rom: rom update complete and after that bootloader, tried to flash several cooked roms: rom update complete and again the bootloader. When I try to charge my polaris it automatically turns on and goes to the bootloader. Flashing with microsd doesn't work. I also tried the thing with mtty, but it doesn't show the usb option in the list...
I DID hard-spl, I was using udk diamond R8 and never had any trouble before, while flashing about once a 2 months. I really am desperate, because I am unable to charge the pda now. I searched well and I only found threads of people who forgot to hard-spl before flashing custom roms.
I hope someone comes up with a brilliant idea, I love my Polaris way too much working and I don't want it to be a nice looking pda that doesn't work anymore.
PLEASE HELP!
I now manage to get into the mtty application, but I don't know if it is a good idea to use it. The problems I found here which could be solved with mtty are different from my problem I think. What would be wise to do? I flashed various original roms, and radios. That seems to work as normal, but after flashing I keep returning in the bootloader screen .
I hope one of you has an idea what to do. If it is something that is involving risk, I think I should do it anyway, because in this current state my Polaris is useless.
a few ideas! maybe they can help!
1) do you have warranty? you can restore back to original spl and then get HTC to ix it!
2) Try flashing your phone without the MicroSD card in place, maybe with the stock HTC Rom
Another option - try to delete all files from your memory card.
Thanks for the replies.
1) do you have warranty? you can restore back to original spl and then get HTC to ix it!
I read the thread about restoring back to original spl. There is stated that you can't restore to original spl if you are stuck in bootloader...
2) Try flashing your phone without the MicroSD card in place, maybe with the stock HTC Rom
I tried a lot of times, but every time after flashing has finished, I return to the bootloader
Another option - try to delete all files from your memory card.
I formatted my memory card in fat32, tried to flash with sd-card. When I turn on the phone it shows about 0.5 seconds something like "no rom image" and returns to bootloader screen
My cruise is still stuck, and I really think about trying things in mtty as a last resort... Anybody who knows what commands I should give in mtty in this situation? All help is appreciated, and if a suggestion makes my polaris work again I will donate the brilliant xda-member 20 euro's!
I have the same fault and have not found a solution. Every time I soft reset I am stuck in the boot loader screen. If I switch off the phone using comm manager then soft reset the phone will boot okay.
The only method I have found to be able to boot properly is to leave the battery out overnight and then start the phone in the morning. Always boots without a problem this way.
To make matters worse the USB port on my phone is broken...
Hi,
I'm kind of new around here.
My problem is as follows:
- TyTN running PaysRom for about 9 months
- Started to get very sluggish
- Unable to get signal
When i booted my HTC the 'R' and 'G' that appear on screen and used to have values in front of it now display 'none'.
So, I connected it to my PC, 'activesynced' it and tryed to install a new ROM, hoping it would solve the problem.
But the new ROM wasn't installed sucessfully and now all I got is a brick.
I can't even connect it to ActiveSync since it's not recognized.
Is there any solution to my problem?
TIA,
hype
Can you get to the Bootloader?
Yes..
By pressing the Ok+Power+Reset on the bottom button, I see the 'RGB'+white thingie, that I believe is the bootloader..
What SPL do you have? Is it Hard SPL V7(2.10)?
If it is, use the sd card method to install a new ROM.
remember to backup your card 1st.
1. Format 2Gb or less sd card FAT32. Copy .nbh file of the ROM you want onto it and rename to hermimg.nbh .
2. Insert card into Hermes and reset into bootloader.
3. If all things have been done right, follow the prompts....
If the radio ROM has died, I'd suggest trying to flash the Shipped Stock ROM 1st and see if that actually fixes the problem with the blank values on R & G. WM06 upgrade of shipped carrier ROM should also work.
Cheers...
Tks for your response.
I tryed the SD Card method already, with no sucess.
The red stripe shows as follows:
Code:
HERM200
IPL-1.04
HERM200
SPL-2.03
Everytime I tryed on another ROM I always perfomed it using SafeSPL.
Since I don't have 2.1, what can I do?
Tks for all ur help.
What happens when you try and flash a ROM over?
Do you get any kind of error?
You need to find the SHIPPED STOCK ROM. WM06 upgrade should be OK as the CID should match.
Put Hermes into bootloader and connect to PC after unticking "Allow USB Connections" in Activesyncs settings on the PC.
Run the RUU_Wrapper.exe file of the SHIPPED STOCK ROM. ven though activesync won't etect it, the flash file should. Follow the prompts.
Good luck as this seems to be the only way to fix this.
Good Luck...
You might be able to flash a Stock WM5 ROM using the SD Card method. Worked for me when I had SPL 2.03. In fact that's the only ROM it would let me flash over when mine bricked.
Can anyone help me?
I was flashing back to stock SPL, using sd card, and pulled the sd card out while it was flashing (don't ask, I seemed to forget for a moment what I was doing and realized I needed my card for my other phone) Now, I have the stock SPL, shows PANT200 SPL-0.36.0000 CPLD-2 when phone starts, and says "Upgrade ROM code error Please Try Again". But, if I put my sd card in it with PANTIMG.nbh SPL file, then I get a screen that says "Loading...". And that's it, left it like that forever it seems and no change.
Any idea? It won't connect to the computer so I can't flash from computer. Even QPST won't find it.
FWIW: I do kinda know what I am doing. Unlocked mine and wife's Treo Pros with Cmonex hard spl, and flashed several ROMs, including a couple I cooked with NightRaven's kitchen. I was just going back to stock cause my wife doesn't like changes, and now this happened.
TIA,
Malachi
OK, thanks to cmonex I got this working again. Had to connect to mtty and run: set 16 0.
Did that and soft reset, and Voila! my Pro works again..
Thanks Cmonex!!!!
Out of curiosity:
I need to revert to the original stock spl as well. Have not found a way yet...Could you offer me some guidance.
Thanks.