I just received my S100 and have played with it for a few days.
But today I had some problems with my bluetooth connection which i could not turn off so I removed the battery from the back to reset it. After i put it back i was presented with the installation instuction like when i turned it on the first time. In settings > battery it says that both are 100% full so my backup battery should take over or am i incorrect? Is this a hardware failure or im doing something wrong? Im glad i alraedy synced it with outlook so i could restore most of my data which was on the device.
Hope somebody can help me here.
-nrg
i think the backup batt runs for only a few minutes... but as you say both are topped of at 100% can you replicate this problem? If not it may have been a one time thing.
Yes i could reproduce it 3 times. I only took out the battery for a minute or so and then put it back again. When I put the battery back and I check the power again in settings it still says 2x100%. If this is not normal behavior I think I will have to return it for exchange or repair.
-nrg
yes this is not normal. well goodluck hope you get a better unit
Thx!
I hope I get a new one although i highly doubt it....
-nrg
Same thing happend to me as well !!
I dropped my Qtek S100 on the floor and the main battery popped out. I inserted it again (it was out just for 30-40 seconds) and a hard reset occured!
Everything lost and still my backup battery was 100% charged.
Peter
maybe the drop had more to do with the hard reset than the battery popping off?
Hard Reset after removing battery for 10 secs
OMG.. This is happening to me too!.... has anyone found a solution for this?
im using 1.11WWE + Big Storage.
Can any brave mini users try removing their battery and reinserting it?.. just to check if you have the same problems.. i have searched the web and have found that many people are having this problem..
you might just want to check if you have this problem because you will never know when you might drop your mini and suddenly your data is lost!.. just like me.. argggg :evil:
I don't have this problem but my friend in HK does.
try to turn off the radio before removing the battery!
i don't now why but when i do that i havn't a hardreset!
try and let we know!!
hehe bye
jackleung said:
I don't have this problem but my friend in HK does.
Click to expand...
Click to collapse
Hi Jackleung.. Thanks for the info.. has your friend solved the problem? if so please let me know how he/she did it..
Thanks again
bubu said:
try to turn off the radio before removing the battery!
i don't now why but when i do that i havn't a hardreset!
try and let we know!!
hehe bye
Click to expand...
Click to collapse
I have tried this solution.. i turned on flight mode.. waited about 3 minutes.. remove the battery, turned back on and the mini still hard resets thank god for sprite backup tho..
No need to test this as this is standard behavior for all pocket pcs (well wm5.0 says it will solve this with persistent storage) if you remove the battery and the backup battery is drained (i think the backup lasts a few minutes only)... YOUR DEVICE WILL HARD RESET. Again this is the same with all Pocket PCs may it be Phone Ed or Regular PPC. Power Drain (Main/Backup Batt) = Hard Reset. So keep your device juiced up always, and please do regular backups.
@benny: you said: "if you remove the battery and the backup battery is drained (i think the backup lasts a few minutes only)... YOUR DEVICE WILL HARD RESET"
but in my and Nutdhanai's case, both main n backup baterry ARE 100%. and we just take out the battery for 10secs (just to try) !!! anybody else can give explanation for our problem?? could it be the backup battery dead???
i made little experience last night. i let the MAIN battery till ONE (1) %, but BACKUP STILL 100%. then i went sleep for about 8 hours. in the morning, i CAN NOT turn my mini at all... pressed power and nothing. then i plug it to my desktop via usb. and it come suddently, without any hard reset!! i immediately straight away check the battery status, its said : MAIN: 0% (charging) and BACKUP: 100% !!!! how coudl it charged my backup battery back to 100% in only 2 seconds after i plug the usb cable?? its very strange!
what will happen normally when the main battery going down till 0% ?? i should use the backup batt, right?? please help us (me n nutdhannai). .
thanks all!!!
hard resets
Hi Guys I went through a phase of hard resets when changing the battery. I found out it was because I hadn't fully moved the locking tab into place. I don't know if this would be the case with your machine. good luck!
@ chop:
no, had try this long time ago, still got hard reset.. unlucky, i think we dont have someone who actually work as XDA technician in this forum to confirm this kind of problem
Re: hard resets
Chop! said:
Hi Guys I went through a phase of hard resets when changing the battery. I found out it was because I hadn't fully moved the locking tab into place. I don't know if this would be the case with your machine. good luck!
Click to expand...
Click to collapse
Yep I tried this but my mini stlil hard resets.. :evil:
Hi guys!
I've no Magican, but an HTC Himalaia (QTEK2020). But i've got the same problem at my device, too.
Seemed to be an driver-bug?
I'm using Windows Mobile 2003 - ROM 1.72 - official edition (non "beta").
I know, that my problem is here in the false forum, but i want to give our these note, so that anybody could be found the solve in a softwaresoultion?
Sorry for my worst english!
Greetings from Germany,
Christopher
No more hard resets for me !
Hi guys,
FYI - my magician is an O2 Mini version.
When I had hard reset problems.. I was running QTEK 1.11 WWE and QTEK 1.12 WWE ROM, both which cause my magician to hard reset when I remove my battery.
Today I was going to send my magician to the service center so I decided to flash my magician with O2 ROM, I flashed my magician with O2 1.11 WWE ROM then I allow the ext rom to install all the applications that it was suppose to (I didnot soft reset to avoid ext rom installation)
Then i figured I should test whether the magician still hard resets or not... I took the battery out and then put it back in... turned it on.. expecting hard reset.. BUT NO!! my magician didNOT hard reset!!! OMG.. I am so happy..
so.. to summarise.. I am not too sure whether the QTEK ROMs are the cause for my magician hard reset or not.. because my girlfriends magician is also an O2 Mini and its running iMate or QTEK 1.11 WWE with Big Storage (definately not O2 ROM) and she doesnot get the hard reset problem.. BUT I can confirm that reflashing my O2 magician to O2 ROM solved my hard reset problem however, I cannot guarantee that this solution will work with other magicians but it might be worth a try..
So anyone having hard reset problems when battery is removed should try flashing their magician to the ROMs provided by your Make.. ie.. iMate Jam should flash with iMate ROM, O2 Mini should flash with O2 ROMs etc...ALSO you should let the extended rom install what ever applications it needs ok.
Let us know how you get on..
I will now try to upgrade my O2 Mini to JAM 1.12 WWE ROM and MKS Big Storage and see whether I will get hard reset again.
Related
Dear All,
I have had my SPV now for about 4 weeks now and very pleased with it. However, twice in the last week it hasn't responded when I turned it
on and ended up removing and re-inserting the battery. When it comes back, it starts with the "Welcome to Pocket PC" setup wizard and all my data is gone.
Has anyone else had this problem. This problem has happened with both
versions of the ROM. The only s/w I am running is
Tube (VisualIT)
MS Arcade Pack (Pacman, DigDug etc)
MS Voice Command
Agenda Fusion
CityTime
Regards & Thanks
Chris
Yeah i got the same problem. But it happens when I upgraded my ExtRom from Orange.com. Sometimes it stays at suspend mode, then i have to perform a hard reset to wake up the device. Very odd.
dfens said:
Dear All,
I have had my SPV now for about 4 weeks now and very pleased with it. However, twice in the last week it hasn't responded when I turned it
on and ended up removing and re-inserting the battery. When it comes back, it starts with the "Welcome to Pocket PC" setup wizard and all my data is gone.
Has anyone else had this problem. This problem has happened with both
versions of the ROM.
Click to expand...
Click to collapse
I have had my M1000 for about four weeks too now and although it occasionally soft resets it never fails to respond to the power button. Maybe you have a faulty phone?
On a different note, you say you have Voice Command, I was looking for places that sell it in the UK but it appears to only be available in the US, if you could let me know where you got it I would be really grateful.
Hope you sort your phone out!
Fin
High all
No probs so far
Swiss m1000 installed Programs
Pocket Hack Master ( Overlock your PDA )
Pocket Mechanic ( Clean Defragment and more )
Snails ( adictive Worms(TM) Clone )
Crazy Cart ( adictive Mario Cart(TM) clone
and lots more.
Im overlocking my CPU to 530 MHZ and no Trubbles so far.
Got the thing for two months now, running in this config for about one month.
Peace
Yep, I am having the same problem or much the same problem. The unite works fine until every four or five days when I notice that the bluetooth light and the green phone radio light are flashing (even though bluetooth is turned off). It does not respond to the power button and then lights go off when I try a soft reset. The only way I can get it back on it with a hard reset.
It does not seem to be a battery issue as the battery is fully charged and when I try plugging in the Charger (before doing the hard reset) the charging light does not light up. I have had the same problem with several M1000s from Orange.
Anyone have any ideas at to what might be going on?
Thanks,
Steve
Yep, I am having the same problem or much the same problem. The unite works fine until every four or five days when I notice that the bluetooth light and the green phone radio light are flashing (even though bluetooth is turned off). It does not respond to the power button and then lights go off when I try a soft reset. The only way I can get it back on it with a hard reset.
It does not seem to be a battery issue as the battery is fully charged and when I try plugging in the Charger (before doing the hard reset) the charging light does not light up. I have had the same problem with several M1000s from Orange.
Anyone have any ideas at to what might be going on?
Thanks,
Steve
With Orange Switzerland SPV M1000 I experience the following problems:
1) Bluetooth lights (blue light) and the battery lights flashes even though
bluetooth is not connected and the battery level is fine.
2) Once every other day the device (though fully charged) freezes and I end up doing soft reset.
3) Removing battery already puts the device to soft reset. Orange
4) The activeSync is running without me having to start any activeSync session.
5) Abruptly I get message the memory is full and the device then freeses.
Is anyone having the above problems? How do i resove this?
Many thanks
Swissmate
SteveD said:
Yep, I am having the same problem or much the same problem. The unite works fine until every four or five days when I notice that the bluetooth light and the green phone radio light are flashing (even though bluetooth is turned off). It does not respond to the power button and then lights go off when I try a soft reset. The only way I can get it back on it with a hard reset.
It does not seem to be a battery issue as the battery is fully charged and when I try plugging in the Charger (before doing the hard reset) the charging light does not light up. I have had the same problem with several M1000s from Orange.
Anyone have any ideas at to what might be going on?
Thanks,
Steve
Click to expand...
Click to collapse
SAME PROBLEM AS THE REST OF YOU WHO HAVE THEIR SPV FREEZED UP VERY OFTEN. IN MY CASE IT'S EVERY 3 OR 4 DAYS, POWER BUTTON AND SOFT REST DOES NOT RESPONDE, SO IT'S EITHER HARD RESET OR SOMETIMES SIMPLY REMOVING THE BATTERY DOES THE WORK. I HAD MY PHONE REPLACED 3 TIMES ALREADY AND STILL THE SAME PROBLEM EVEN WITHOUT INSTALLING ADDITIONAL SOFTWARE BUT WHAT CAME BUNDLE WITH THE ORANGE PHONE. IS THIS A ROM BUG ???
SPV M1000 FRANCE
SD CARD 1 GB
OMEGA ONE BATTERY PACK PRO
OMEGA ONE JOURNAL BAR
SPB GPRS MONITORS.
FORTUNATELY I USE THE X BACKUP PROVIDED WITH THE PHONE TO SAVE MY DATA, BUT IT'S TIME COMSUMMING AND REPETITIVE AS AFTER EACH TIME THE PHONE RESETS ITSELF, I HAVE TO RESTORE IT AGAIN AND AGAIN. :evil: :twisted:
IF SOMEBODY COULD IDENTIFY THE PROBLEM, THIS WOULD HELP A LOT OF PEOPLE LIKE ME
THANKS
RICHARD
There have been frequent reports of this problem- Orange are aware of it, and are replacing M1000's as required. They are currently testing a new ROM, so it appears that they think it may be a ROM problem, though it could also be a batch of faulty hardware.
Another possibility
Turning off the record button seems to have helped, could it be that this is being caught and filling memory / draining batrtery?
3rd phone 3 weeks.
Great when working - anyone using a GPS receiver? Tried a TomTom with an XDA 2 lead is not recognised
Re: Another possibility
BobW said:
anyone using a GPS receiver? Tried a TomTom with an XDA 2 lead is not recognised
Click to expand...
Click to collapse
Remember you have to turn of the IR in settings>connections>beam before a GPS will be recognised.
NeilM said:
There have been frequent reports of this problem- Orange are aware of it, and are replacing M1000's as required. They are currently testing a new ROM, so it appears that they think it may be a ROM problem, though it could also be a batch of faulty hardware.
Click to expand...
Click to collapse
we got almost 30 of these at our work, it seems the only one to have this problem is... my one! so i swapped it for another one and it did the same problem... hmm, they must not like power users, the other users are idiots so they dont really mess about with the settings n all
anyhooz, ill be upgrading all of em to SE very soon and i doubt that rom will have the same glitch...
who knows... now that we can confirm (99%) that SE works on the xda II maybe the operators will now make an official upgrade to SE... they have no reason not to
regards
djrm.net said:
we got almost 30 of these at our work, it seems the only one to have this problem is... my one! so i swapped it for another one and it did the same problem... hmm, they must not like power users, the other users are idiots so they dont really mess about with the settings n all
Click to expand...
Click to collapse
Hmm. That is interesting. Only having one here - and having problems - I do not have much to compare.
Do you think the problem comes from changing the standard settings or using extra software then?
By the way the new ROM does not seem to make much difference in terms of this problem, alas!
Exactly the same thing to me...
Every 5 or 6 days... it goes of for no reason, and the only way to wake it up is to hard reset it! weird SPV... maybe some day a nice guy will come up with a solution to our problem! Hopefully...
:shock:
To keep an old thread alive
Those experiencing issues with this device going into coma (requiring Hard Reset to clear)please would you post detailed accounts of when the issue occurs.
Please confirm power settings, what applications were open on the device and whether the radio or BT was on.
Does the problem occur off or on charge, if on does same problem occur if charged from travel charger not dock?
If off charge, if known - state both internal and external battery charge levels when problem occurs?
What is seen on the handset at point of coma?
Working from soft Reset through battery off to hard reset, what was necessary to restore the device and did soft reset or battery off result in a dump?
Could ROM V's and bootloader V's also be stated.
cheers guy's, together we'll crack it
To keep an old Thread Alive
:roll: I have had my phone from about June last year. The first reset occurred about the 3rd Jan this and two more occurring in the past few weeks the last one on sat 12th Feb
The history as I can recall with the last reset is as follows. I took the phone out from work (cradle) Friday afternoon after 4pm don’t think it was put to charge again before the incident also the phone was not used very often as its a work phone. It was on stand by all day Saturday with the green light flashing but no signal input was being received as I was expecting a cal which never came only to find out the phone was off as mentioned by the caller when I called them. Got home about 530pm with the light still flashing and tried to switch the phone on after finding out no signal was received, the light then went out. Could remember this quite distinctly as it happed on the previous occasion. To activate the phone i have to take the battery and sim card out as with the previous occasion put the card in another/different phone to activate it (make a cal) then put the card and battery back in for the phone to work when it would then go through the reset process. Once working on checking, both battery powers were very low think less than 50% as when i checked some time after they were up to 75%
Am in an office with 3 other users and the only one with this problem and am on my 3rd phone since the year started. It seems to be linked with low battery power (both) and extended stand by when it completely shuts down. Trust this would help to get us a stage further.
i have had two m1000's with this problem,
orangecare stepped up for the replacement and i upgraded the 2nd to win2003se and it still does it!
i make scheduled backups now and have learnt to live with it until my contract expires..
on another seperate note..
Remember you have to turn of the IR in settings>connections>beam before a GPS will be recognised.
Click to expand...
Click to collapse
how do i do this in 2003se?
MORE ON THIS
I had an M1000 that worked fine but a small problem occured and orange replaced it - the new one had this problem every 7 days or so - the bluetooth light was flashing although not switched on and when I try to turn phone on it wont - remove/replace bat and resets - I upgraded to ROM 2.02 from this forum but was using origional orange extended rom and it made no difference - if it is a rom problem its in oranges extended rom
I was on a 166wwe - boot loader 1.06 - dont know radio version but was still happening after DCM 2.02 WM2003SE WWE from this forum with radio 1.18.00 and original ORANGE ext rom so if is on ROM is definatley oranges ext rom that has a problem. - HAS ANYONE HAD THIS HAPPEN WHILE ON CHARGE????
THEY REPLACED MY PHONE WITH A REFURB - ITS NOW FINE BUT IM NOT HAPPY
guys lets think here
were all orange subs so its got to be an orange thing (so unlikley to be hardware) - there are people here (myself included) who have upgraded radio and OS so I am begining to think it is in the extended rom on these machines - has anyone who has replaced extended rom had this trouble - I would experiment but no longer have this fault - I never thought Id wish I could get it back but now I think I can see a resolve
we need an orange customer who does not have this trouble to post extended rom on here for us all to try????? - - - Please ??????
it would be nice to crack this one guys keep plugging on
Had my M100 nearly a year now and after many many resets decided to call Orange as I would have thought this was a known problem with them. But according to technical they have never seen this before!!!
There response was ... backup your data! doh!
I told them I did and it was unacceptable to say this as the thing is faulty it takes over an hour to reload the data and it's happend 4 times since I called them 4 days ago.
:twisted:
PS: has anyone got a copy of the original 1.66 rom as you can no longer get it from Orange.
Hi,
I have a problem - when I remove the main battery out of the mini (battery out for 5 seconds), it hard resets... this happens everytime i take the main battery out. Backup battery is 100% charged too
To test if the backup battery is working..
I have tried leaving the main battery out for 30 mins. When I put the main battery back in, I checked the backup battery if it has been drained or not...it stays at 100% still! hmmm.. Im guessing there are some kind of hardware problem..
also, this did not happen when i first got my mini.. however, I have dropped it a few times since i first got it.
I have tried reflashing with O2 1.11 ROM but still the mini hard resets
I would like to try taking the backup battery out hoping that it might reset something in the hardware... soo... can anyone please point me to where the backup battery is located and whether it can be removed? or anyother solutions that might work..other than taking to service centers (service in thailand sucks big time)
Thanks a lot
NR
Hard reset still occur after remove/reinstall backup battery
Ok I have found where the backup battery is in the magician.
THe backup battery is located just under the speaker (for the speaker phone)
It can be removed by wedging out the cap which holds the backup battery down.
Backup battery model - VARTA V18HRT
However, I removed the backup battery, then reassembled the magician.. the OS reported that there are no backup battery - correct.. after reinstalling the backup battery and reassembled, i still get hard resets.. hmm..
I must have hardware problem on my phone.. :evil: argg..
so, have you contacted the service center and tell them about this problem? are they said that this is 100% hardware problem??
thx alot...
erwinsie said:
so, have you contacted the service center and tell them about this problem? are they said that this is 100% hardware problem??
thx alot...
Click to expand...
Click to collapse
Nope I havnt contacted the service center yet.. but will let you know if there are any progress on my side.
i think we have to. i already sent email to them, but monday will try to call them. will tell you too what they said about this. it seems like nto many ppl have this problems so not many member can give us real solution im afraid this is hardware problem
Hi
I bought Mini 6 months back, it was working fine,
but from a monthor so, I've been having this problem of it restarting (rebooting - ie it goes back to the O2 splash screen)anytime, even if its idle..
sometimes it won't for few days, sometimes thrice in one a min, and it has no specific pattern! I've no other softwares intalled on it either!
i have removed everythin from it..yet it is having the problem!
It doesnt harm anything but its really irritating when you are working and it restarts or when you turn it on you see it had tunred off and is restarting....
i have even tryed hard reset but even that dint work..
my ROM versin is 1.12.00wwe radio version is 1.12.00 protocol version is 1337.42 & ExtRom version is 1.12.920 wwe
PLease Help!
As i can't find any reason for it...
Did this start after a ROM update?
i never had a ROM UPDATE
Did you drop it by accident?
Have tried hard-resetting it (power & soft-reset), backup first
M
well cant say ihave dropped it or no...i guess it must have dont know
well i have tryed hard-restart many time but dint worked
enrique_x5 said:
Hi
I bought Mini 6 months back, it was working fine,
but from a monthor so, I've been having this problem of it restarting (rebooting - ie it goes back to the O2 splash screen)anytime, even if its idle..
sometimes it won't for few days, sometimes thrice in one a min, and it has no specific pattern! I've no other softwares intalled on it either!
i have removed everythin from it..yet it is having the problem!
It doesnt harm anything but its really irritating when you are working and it restarts or when you turn it on you see it had tunred off and is restarting....
i have even tryed hard reset but even that dint work..
my ROM versin is 1.12.00wwe radio version is 1.12.00 protocol version is 1337.42 & ExtRom version is 1.12.920 wwe
PLease Help!
As i can't find any reason for it...
Click to expand...
Click to collapse
Some body here help please.......My O2 mini has also the same config and am facing the exact problem for last month and a half......did no upgrade...tried everything....Help
Well come on guys any clue regarding this.... :roll:
As far as i remember i installed the new bluetooth stack available here on this forum...... Nothing else which i can say mite hav started sumthing.
rite now i only hav a pocketplus installed, which infact i'm usin since da first day.
See if ny one can help in this regard.
Do you still have warranty? If so give it a try.
Regards, M
have you tried giving it a hard reset yet??
Bowie said:
have you tried giving it a hard reset yet??
Click to expand...
Click to collapse
yup......did it..... no use.
rashtrapati said:
Bowie said:
have you tried giving it a hard reset yet??
Click to expand...
Click to collapse
yup......did it..... no use.
Click to expand...
Click to collapse
I encounter this before
1. restart randomly
2. hard reset randomly
3. phone receive no signal
later i found out all these symptoms was due to faulty battery packs. I have 3 battery, & 2 of it provides such problem. And these 2 are new batteries
amazingly my original battery still works fine thou it only last a day.
If your set still covered by warranty, send it back. Who knows you might have some battery pins problem instead of the battery itself or the mainboard itself is faulty.
Good luck
may be u r rite..... but i dont think so.....
i guess will have to submit it at the repair centre then
this happens to me also - the resetting just started a couple of months ago. I am using an xda mini, on which I did a bigstorage update last year some time.
I'm on rom 1.11 (date 3/14/05) and radio 1.11
Suppose I would like to update that some time, but... I've moved to Mac and my pc is all dusty! haha.
Anyway, I want to send the xdamini off under warranty, but I'm not sure if it will be a problem that I have Big-Storaged it? Should I try to clear the bigstorage and get it back to original state first, or will they not mind that it has a big storage rom version. I've got a couple of months warranty left.
thanks...
This may sound really basic, but I had similar problem with my imate jam, and it all came down to a loose battery cover. For some stupid reason the jam shuts off power when the cover is removed even before the battery is removed.
the clips on the back cover press against a contact which fires up the jam. My loose back cover was constantly cutting off power and then reconnecting. Just a thought.
Hi all,
i have a serious problem with my MDA Vario II (HTC TyTN),
just have this device since 2 weeks, and last week i flashed a rom onto my device, its a nameless windows 6.1 rom...
the flash went perfect, the device worked flawlessly!
the device has been working fine all week, i had it hard reset for like 2 times.
now i did another hard reset, everything seemed to go just fine, battery was 100% device nicely came into the bootloader mode, nicely went resetted, perfectly booted letting me setup the device and calibrate the stylus right after this the device resetted itself and after the windows logo it just went into white screen, i waited this out for like 15 minutes and then i pressed soft reset... this white screen was the last thing i have seen on my screen so far (2 days ago now) the only thing my device does is give me a red led when it is connected to the wall charger or usb and the battery is not in the device
as long as my battery is in the device it does absolutely nothing, no sign of life!! not even a red led!
is there anything i can do about this? or do i need to send it away to t-mobile?
i really hope someone can help me with this one!
cheers ChilleCharlie
ps: normally when i press both the soft keys and the reset it would take me into bootloader mode, this doesnt even work no more!
i have been reading on this forum for 2 days now i just have no idea what this problem could be! can somebody please help me! i think it might be my accupack is that possible for a 2 weeks old phone?
is a herm100/200/300 device capable of booting without a battery in it?
cheers Charlie
ok here comes the test result, i was planning on shipping my phone back to the supplier but instead of this i tested my battery with a electrometer guess what? 0,04 volts are on my lipo pack!! OMG battery sudden death! never had this before in my life! now i know i can fix this battery pack did that before with some years old li ion and some months old lipo's but since i am under warranty i hell yea am gonna make use of it! this pack will be sent back to t-mobile in the meanwhile ill buy my ass a new one so i can use my phone
thanks for everything this website is great even thow i havent had 1 reply yet, thanks to you guys i got wm6.1 and will get it back running now! tytytyty btw i heard something about hardspl beeing more safe? i guess i should flash it onto my device or is that risky to do ?
Sorry, didn't see your post until today. Might not have been able to help anyway.. Glad to hear you sorted that out OK though..
As for Hard SPL, its a must to have on your Hermes before flashing as it will make it possible to recover from a bad flash. Its NOT a guarantee but it is a safety net to help when things can/do go wrong.
Would also suggest using the sd card method for rom flashing as its safer than via pc(Hard SPL takes about 2 secs to upgrade so I do that from the pc BUT you can do this via sd card too).
Welcome and happy flashing...
thank you for that information once i get my device running again it will be the first thing ill install even thow i dont think my problem is rom-related anyway, today my battery has been tested in a different phone, as i thought it was completely dead! also my phone has been tested with another battery... well my phone is completely dead as well! i think it has had a short circuit somewhere inside which would explain why it doesnt do anything with or without battery installed...
i do not know for sure thow.. but thank god i still have my warranty.. althow im not sure about this since my phone wasnt running official firmware.. but i guess that has nothing to do with hardware malfunction now does it? so ill be sending it back to the supplier tommorow damn i cant stand not having this device working
cheers chillecharlie
After installing a new rom ,my polaris died ,no lights not recharging , I removed the battery,the SD and the sim card for > 24hrs and still the usb is not recognised and no lights at all and also not recharging any solution????
Hold camera button, and turn the phone on.. then you will get the hard spl boot screen..
After this you can flash a new rom.
notebook said:
After installing a new rom ,my polaris died ,no lights not recharging , I removed the battery,the SD and the sim card for > 24hrs and still the usb is not recognised and no lights at all and also not recharging any solution????
Click to expand...
Click to collapse
do you have anything on the screen at all? or is the screen off as well?
try to be more specific please if you want to fix the problem:
What rom were you trying to flash?
do you have hardspl?
are you an experienced user or a novice?
was the battery fully charged?
did it flash completely and give you a message telling you it was successful?
is anything coming on at all?
is it under warranty still?
if you supply at least this information you will have a better chance that someone can help you fux it fast.
best of luck.
Venigo Thank u for your reply I tried this and tried many things before post ,no response.
bally3 Thank u for your reply I'll try to be more specific:
This happened after I flashed new Parcvello extreme rom.
I had a hard spl
I'm an experienced user
The battery was not fully charged and after flashing the rom I opened my polaris and it worked for 3 minutes after that it died.
No thing is coming at all
The warrenty period finished 6 months back
Thank u for your wiching best luck
notebook said:
Venigo Thank u for your reply I tried this and tried many things before post ,no response.
bally3 Thank u for your reply I'll try to be more specific:
This happened after I flashed new Parcvello extreme rom.
I had a hard spl
I'm an experienced user
The battery was not fully charged and after flashing the rom I opened my polaris and it worked for 3 minutes after that it died.
No thing is coming at all
The warrenty period finished 6 months back
Thank u for your wiching best luck
Click to expand...
Click to collapse
My first advice is to try another battery. I cant see it being rom or flash related though its quite possible its hardware related and would need service centre attention.
Try a new battery. since you say nothing is coming on at all, I take it theres no power at all to it. You can try another battery or ask someone to test the battery for you using a meter to see if theres any charge in the battery itself.
When you say not fully charged I hope you mean like 40% and not 20% before flashing.
Did you get through all the setup before it crashed? Not that important but just trying to get a picture of what was happening when it went off.
if all else fails if you got it on contract you could ring them and ask them to look at it. If it isnt on contract then might be worth biting the bullet and seeing how much a repair centre would charge to fix it. You should at least be able to get a free estimate.
it can't be the battery, since the phone can work via the net with the battery out, even if the phone is off.
BelgicanoFL said:
it can't be the battery, since the phone can work via the net with the battery out, even if the phone is off.
Click to expand...
Click to collapse
You are responsible of wasting 3 minutes of my life testing your theory...
Polaris wont work without battery as i predicted...at least mine wont...
So the battery might still be a possibility as mentioned above...
I dont see any other possibility beyond hardware failure.I tested all PCarvalho´s xtreme ROM´s and never had problems beyond software issues and he flashed the ROM and it was ok for 3 minutes as he said...at least bootloader would kick in.
Thank u all for your reply : I didn't mention that PCarvalho 's Rom is the cause I'm sure it isn't.
My second step is changing the battery and I 'll till you about the progress.
Still the same proplem after i tested the battery which is charged
in that case its a repair centre job then unfortunately...sorry to say.
Do any body knows where is the HTC repair centre in Cairo,Egypt
actually i had a similar problem. polaris totaly dead. then i discovered, that the sim slot thingy didn't "click in" properly. that solved my problem.