Hi guys!
I'm currently using a Qtek XDA 1010 that's been upgraded already with the XDA Developer's Special Edition ROM. I'm planning to install the Windows Mobile 2003.
Questions:
1) My phone used to be simlocked, but due to the SER now it's openline. If I upgrade to Mobile 2003 will the simlock be active again? Hope not.
2) If I upgrade to Mobile 2003, will it have any negative effects on the radio functions? I've been reading notes that a lot who've upgraded their RSUs totally wrecked their phones.
3) Is it worth the upgrade?
Many thanks! 8)
jaspernetix said:
Hi guys!
I'm currently using a Qtek XDA 1010 that's been upgraded already with the XDA Developer's Special Edition ROM. I'm planning to install the Windows Mobile 2003.
Questions:
1) My phone used to be simlocked, but due to the SER now it's openline. If I upgrade to Mobile 2003 will the simlock be active again? Hope not.
2) If I upgrade to Mobile 2003, will it have any negative effects on the radio functions? I've been reading notes that a lot who've upgraded their RSUs totally wrecked their phones.
3) Is it worth the upgrade?
Many thanks! 8)
Click to expand...
Click to collapse
tried the wm2003 for a day, and had a lot of issues with it... extremely laggy, hard to receive and make calls, call quality is bad (pops), and just plain buggy i suppose. was using 4.00.1 i think... Ali's version. Flashed the SER 1.2 instead! a lot stabler, but darn! so many extra icons? :lol:
Hey, I am new here....
I have had mt ATT SX56 for 2 months and am fed up and switching to Tmobile. I'd love to be able to use this phone with the T-Mo service.
From reading these forums I tried to use the XDAUnlock.exe, but that didn't do anything because an error message showed up. So now, I went and purchased a serial cable.
I don't know what to do next. I would optimally like the WM 2003 on the phone after I update it, and I'd like the phone optimized for T-mobile.
If someone would point me in the right direction by giving me some instructions of what to download, where, and what the process is, I would really appreciate it. I know I have to cook my own ROM, etc....but which one? And how?
Thanks!!!!!!
Brad
If XDAunlock.exe didn't work, then the best start point is to flash your ROM with the XDA-developers ROM 3.17 and it will unlock your XDA with the first booting. Next, you can cook any 2003 ROM you like and flash your XDA again.
For the RSU, if the current Radio version didn't get the signal in your area, most propably you will need to upgrade your RSU to TMO 6.24
You can get the ROM from http://kitchen.romanweb.com/kitchen/index.php
And you can get the RSU from www.yorch.net "upgrades"
In all cases, you better to do SD backup of the current versions.
Good luck ...
OK-
Finally got the XDA unlocked with the SER. Thank you XDA Developers!!!!! Now I have a useless serial cable. Oh well, I'll take that over my other options..
Is it normal that the SER increased my reception? I now have signal in my house whereas I did not before. Also, I seem to have lost all possibility of connecting to the internet. How do I get this back? What do I do in the connection settings?
In any event, now that I did that, exactly what rom base do I cook if I want PPC Mobile 2003? 4.00.05 PPC 2003, 4.00.10 Tmo, or 4.00.16 Tmo?
Thanks!!!!!!
OKey DOke-
One last question...I have upgraded to the Regular ppc 2003 rom.
Phone works, internet doesn't. How do I set this up?
ok, i have installed the special edition rom for my xda1 and its a definate improvement over the original rom..
but i noticed that the window mobile 2003 upgrade is available from o2 and wondered whether it was significantly better than the special edition?
of course, if there was a xda-developers special edition rom based on wm2003 that would be the best solution... :?
Nas
There are many WM 2003 ROMs and most of them works quite fine ... try the kitchen at www.yorch.net or http://lumpistefan.dyndns.org/
nasman said:
but i noticed that the window mobile 2003 upgrade is available from o2 and wondered whether it was significantly better than the special edition?
Click to expand...
Click to collapse
Where is the WM2003 upgrade from O2??????
Give me alink to download please...
Stefan
I didnt know there was one, anybody else seen it?
nope i cant see it.
my bad
soz, not from o2, just the ones from other providers that are floating about.
Re: my bad
nasman said:
soz, not from o2, just the ones from other providers that are floating about.
Click to expand...
Click to collapse
Just do it, upgrade it! I upgraded my Siemens SX56 with AT&T to 2003 and than cooked the rom from Yorch to unlock. By the way, it is a very good rom, thanks Yorch.
I did it with SD cards one of my XDA's, it worked perfect and quick: saved 2003 rom on one card, cooked Yorche's on another. The saving and installation was done through the bootloader as discribed in the proceedures in frequently asked questions section. The extracting and saving of Yorche's rom was done through OSImageTool in XDAtools into an SD card inserted in a USB card reader/writer (Inland 9 in 1 card Reader/Writer, $10 at Micro Center). The battery was fully charged on my SX56 and the flashing of rom's back and forth was done without the XDA being pluged to power unit. I tested the unlocking with a T-Mobile card, it recognised it, I made some phone calls with no problems, kept Yorch cooked rom for two days to get to know it and then flashed it back with my SD saved 2003 rom in my friends apartment just to show off how easy it is to flash the rom. it worked very well (it took about 5 minutes).
The 2nd SX56 was done all through ActiveSync with the XDA and card reader/writer pluged in and all synchronised (allscreen savers, power savers etc on PC and XDA OFF and battery charged). This XDA still had the original 2002 rom. The unlocking went very smooth. I did a full back up of the rom with ActiveSync. Since the cooked rom is PW10A1 and mine was PW10B1 I needed to get back my original rom to the XDA. The restore didn't work because it is a different partnership. So I flashed it back with my SD saved 2003 rom in a card reader/writer and OSImadeTool through ActiveSync. Everything was fine all the way to hard reset. I waited a minuteor so and did a hard reset and nothing happened, did it couple of times, nothing. It would not restart. I pressed the power botton and it went to bootloader mode. I did soft reset and the unit goes blank, dead. So I inserted the SD card with my 2003 rom into the XDA's memory slot and did the the bootloader mode, it took it, I flashed it. And now I have my 2nd SX56 with 2003 rom and the old radio stack ulocked working like a champ. I tasted with T-Mobile card and it works instantly, no configurations needed. Now I have to do a complete upgrade.
After all I like the new 2003 better but with some of the programs from Yorch Kitchen rom, which I installed and they work fine.
You, ladies and gentlemen, at XDA-Developers are the greatest thing that happened to the mobile devices community. I honor you and thank you. And Peter Poelman, you are the wizard, thank you.
John
can you guys show me how to cook to ROM or and link to download the file upgrade from wm2003 to 2003. Thank a lot . I'm using O2 XDA 2002
tommy_kiss79 said:
can you guys show me how to cook to ROM or and link to download the file upgrade from wm2003 to 2003. Thank a lot . I'm using O2 XDA 2002
Click to expand...
Click to collapse
Look here for the answers:
http://wiki.xda-developers.com/wiki/FAQ
and here to cook the rom:
www.yorch.net
check what you want or don't want and click Build ROM now, after it is done click Download. Before you build and download choose which file you want, exe or nb1. What ever you do backup your original rom preferably and safer to an SD card either through OSImageTools in XDATools and ActiveSync or the mode and the SD card pluged into your XDA
bootloader, and read the forum in details...
The new Mobile 2003 you can get at any of the provider or manufacturer of XDA's: www.T-Mobile.com, www.ATTwireless.com, www.My-Siemens.com, Microsoft has a list of manufacturers that have upgrades - www.microsoft.com/windowsmobile/resources/
Make sure you use the right one for PW10A1 or PW10B1 what ever your device Model No. is...
Good luck, John
saracen said:
The new Mobile 2003 you can get at any of the provider or manufacturer of XDA's: www.T-Mobile.com, www.ATTwireless.com, www.My-Siemens.com, Microsoft has a list of manufacturers that have upgrades - www.microsoft.com/windowsmobile/resources/
Make sure you use the right one for PW10A1 or PW10B1 what ever your device Model No. is...
Click to expand...
Click to collapse
John (and any others out there),
I hope that I'm not asking something here that is covered in some faq on this board and I think I've read them all, but...
I see mention of a lot of versions. 4.00.21, 4.00.01, A30.05, A30.09 etc...
Is there someone that can tell us new guys a little more about these? IE, what is it exactly, 2003, 2002, beta, final, alpha?
I recently bought a Wallaby, and want very much to use the MS Voice Command. Therefore, I have a definate need for a 2003 rom. I have read and reread the forums here and have a good handle on how to flash my rom, but I'm so confused as to what the best (read most reliable) rom to install, as well what radio version would work with the given rom choice. I'm not necessarily asking for a recommendation, but perhaps a nudge in the write direction.
Sorry to dump on you in particular, nothing personal either mind you! It's just that I'd love to read a FAQ for the different versions and what might be expected from them I guess. (I hope like heck I'm making sense here!)
Thanks!
Larry
Hello,
Actually, the only difference between ROM versions is bug fixing with newer versions, but the only significant factor is whether it's PPC 2002 or WM 2003 ROM.
For upgrading, I may recommend TMO 4.01.00 (my personal preference) or A30.09 (with a minor sound issue). If you need to unlock your device you must start with PPC2002 3.17 ROM first then select any WM2003 later.
There is no connection between the ROM and RSU. However, the RSU is the most sensitive part in the XDA. If you have a functioning RSU ... do NOT touch it!!
Last, get a SD card and take a backup ... it's safer and you can use the SD to upgrade as well.
Good luck ...
This is to Larry,
All these replies take you through the right directions. I have two Siemens SX56 devices with AT&T Wireless, both PW10B1, Pocket PC2002 (Ver. 3.0.12039), ROM Ver. A.20.17 ENG, RADIO Ver. A.20.10, 32MB Rom.
1st one I upgraded the day AT&T and Siemens released the Mobile 2003 free upgrade. As much as people complained, cursed and were distroying there SX56 devices ( what I read on AT&T forums) I never had any problems, and as a matter of fact the more I used the device the better it became. I played with it for about two weeks and then I decided to unlock it. So I placed my SD card into the SX56, started the bootloader, downloaded the original 2003 Rom image, soft reset the device. I cooked the Special Edition Rom based on 3.17.03 O2 ROM in Yorch Kitchen, I built the nb1 file, I downloaded, extracted with WinZip, put it on another SD card, put the card in my SX56 device, started the bootloader, flashed it, did a hard reset. It didn't ask me if I wanted to unlock it but the XDAunlock program was there, I taped it, it asked me if I want to unlock, I did. I checked it with a T-Mobile sim card, made a phone call with no problem (I tested with the same card before and after, before asked me for the pin number and after it logged in to T-Mobile network). I used it with the Special Edition Rom for about a week to see which programs I liked and wanted to install on my device after I flash back to saved Mobile 2003 Rom. I flashed it back with the 2003 Rom image. I was on the road, away from power supply, my pc, usb ports etc. Just the unit with its battery charged up, the SD card and the bootloader. It took 5 minutes.
My 2nd SX56 device I did before the 2003 upgrade, the original 2002 still there, with ActiveSync, OSImageTool in XDATools, SD cards, card reader/writer and nb1 file. This time I overlooked the saving of the original 2002 Rom and it went directly into the flashing with the Special Edition Rom cooked in Yorch Kitchen. I unlocked it, tested with T-Mobile sim card and flashed it back with the the Mobile 2003 Rom image saved from my 1st SX56 device. It didn't want to wake up after the hard reset. It kept going to the bootloader mode. So I inserted the SD card into the SX56, started the bootloader , flashed it back again with Mobile 2003 Rom, did a hard reset. It worked. Now I have my 2nd SX56 with new mobile 2003 Rom but old, the original Radio Stack from Pocket PC 2002. It works fine. The working is like the Upgraded 2003 device. Maybe with the older radio Stack is more stable on the signal, and I don't know for sure because I did not tested, only what I read and the people having problems. My preference is a total upgrade, the Rom and the Radio Stack, I noticed that the audio quality is better with the total upgrade, specialy when on the speaker phone during a phone call.
What ever you do save the settings and the Rom images and you do the right PW10A1 or PW10B1 (the Special Edition Rom is PW10A1). Make sure all the screen savers, power savers, sleep modes etc. are turned off on both the PC and the XDA device.
Good luck, John
saracen said:
What ever you do save the settings and the Rom images and you do the right PW10A1 or PW10B1 (the Special Edition Rom is PW10A1). Make sure all the screen savers, power savers, sleep modes etc. are turned off on both the PC and the XDA device.
Good luck, John
Click to expand...
Click to collapse
Thanks, guys!
I kind of knew that the differences were a matter of bug fixes, what I wasn't sure of is which is 2003 or 2002. I'm going to keep reading here of course. This is a fantastic site to be sure!
So, bottom line is I guess I'm just going to pick a couple of them and flash them and play with them so which works the best.
Many thanks again guys! Larry
Larry,
Yes, exactly. I forgot to say that my new rom is an AT&T- Siemens: ROM Ver. A.30.09 ENG, Radio Stack A.33.02. The previous Rom version had a band switch (900 for Europe or 1900 for Americas) in the Settings and under Phone but now with the new it has an auto configuration which I like better. I can always search the network manually. By accident I found that if you set it to manual and don't have a network specified or any signal strength showing as long as the phone is turned ON, I can still get on Internet.
Good luck, John
One final ?
Guys
Is there ANY version of the W2003 ROM that comes with the Wmodem (or similar) application ?
I first came to xda-developers when I was trying to use my Qtek as a modem....thereafter we saw the O2 and Qtek PPC (2002) upgrades that brought in the Wmodem utility.
That seems to have disappeared off the priority list for most people these days, though.
Cheers
Sands
Sandyind said:
That seems to have disappeared off the priority list for most people these days, though
Click to expand...
Click to collapse
IMHO, the new PCs/laptops with either built-in WiFi or WLAN functions or with equivalent PCMCIA cards, or even with SIM module inside, made it out of the wishlist
Re: One final ?
sandyind said:
Guys
Is there ANY version of the W2003 ROM that comes with the Wmodem (or similar) application ?
Click to expand...
Click to collapse
The German Version 4.00.33 from t-mobile comes with the wmodem application
HTH
Stefan
Stefan,
Is there an English version of Mobile 2003 with wireless modem for PW10B1 XDA?
Thanks, John
Can't receive USA Cingular signal 850mhz- Help Anyone?
I've posted on some other forums but no-one seems to have an answer. Can an unlocked AT&T SX56 be adjusted to work on the Cingular 850mhz system?
Help!!
Doc
Hi all,
I've searched this site & the whole net for the new Windows Mobile 2003 Second Edition ROM, but unfortunately I didn't find any kitchen for it! :?
I've heard that many people are using it now on their XDAs!
Can anyone tell me where can I find those ROMs??
Thanks alot..
ezzkht said:
Hi all,
I've searched this site & the whole net for the new Windows Mobile 2003 Second Edition ROM, but unfortunately I didn't find any kitchen for it! :?
I've heard that many people are using it now on their XDAs!
Can anyone tell me where can I find those ROMs??
Thanks alot..
Click to expand...
Click to collapse
Did you get anywhere? Im looking for advice on upgrading from PocketPC 2002 on my uk O2 XDA.
I found the free upgrade from PPC2002 to Windows Mobile 2003 (AT&T services) on this site, but it updates not only the operating system, but also the radio stack:
http://www.my-siemens.com/MySiemens...2FMC%2FSX56POCKETPCPHONE%2Fdanda_DADS,00.html
Afterward, I wanted to unlock my phone and used the xda-developers special edition ROM. I guess it put the older PPC 2002 back on my XDA, but unlocked my phone AND I have fabulous reception where I had no signal before! Some of the new things from WM2003 are gone BUT I have great reception. The WM2003 nk.nbf file left on my computer is just under 32MB, and that is, I guess, the actual operating system upgrade w/o the radio stack changes the link above gave me. Trying to be brave enough to load it back onto my XDA... as I don't want to lose the fabulous reception I now have.
ezzkht said:
Hi all,
I've searched this site & the whole net for the new Windows Mobile 2003 Second Edition Can anyone tell me where can I find those ROMs??
Thanks alot..
Click to expand...
Click to collapse
No such thing called XDA version Windows Mobile 2003 SE.
It doesn’t exist.
Windows Mobile Second Edition? Not until summer/fall.
Microsoft is suppose to launch the second edition of Windows Mobile aka Pocket PC 2003 towards the end of summer/beginnning of autumn. The only device they've announced to support the updated OS is the Motorola MPx200. Until it's release, Windows Mobile is the most recent OS for Wallaby devices.
WIN 2003 SE!
ah ok, so the new Windows 2003 SE has not been released yet!
I have the Microsoft Windows 2003 SE emulator images, but i guess it won't work for any device! I can only use the SE version on emulator, so thats why I was wondering if they've released it on real devices!
so what about the latest ROM version for XDA I??
I have found that 4.01.16 ENG (from http://xda.weblink.net) is the latest Windows 2003 ROM among all the kitchens!
Is there any newer version ??
I also found a ROM called A.30.09 ENG.. What does that mean?? Does this ROM works on XDA I ?
Thank you all
4.01.16 from T-Mobile or 30.09 from AT&T are the latest WM2003 ROMs available for XDA I ... however, A30.09 has a silly sound issue (clipping).
Well, I believe the SE edition has been released. Is there any way for us xda 1 users to get this thingy working on our units?
the SE is released for OEMs only ... it's a matter of time before it's commercially available especially the PE
ThAnKs dude I will install the T-mobile 4.01.16 ENG then..
FYI: I've seen WM2K3SE running on an XDA I device at the MDC last week in use by a MSFT. I was not able to inquire as to it's functionality as I'm sure it isn't optimized yet - much like the beta version I received for my hp iPAQ h2210.
Pity you didnt get a rom dump on an sd card
oh yes, good idea to take an image of the installed ROM on SD card!
I am going crazy searching the net for win2003SE!!!! I can't find any
I just have it on my emulator, its fast & i guess its well optimized more than previous versions!
Hi!
I am new guy here,
and whant to upgrade my O2 XDA to Windows Mopbile 2003 (2003SE).
My phone is runing now XDA rom version 3.17.03
Can you give me advise how to perform safe upgrade
of my originally nonlocked O2?
I have read that some people perfomed upgrade
without errors, but some have trouble to back to 2002 after,
or frozen after boot WM2003.
Its not clear for me and I think for some others here, why
on the same device, different results expected.
merci
leon
Leotel said:
Hi!
I am new guy here,
and whant to upgrade my O2 XDA to Windows Mopbile 2003 (2003SE).
My phone is runing now XDA rom version 3.17.03
Can you give me advise how to perform safe upgrade
of my originally nonlocked O2?
I have read that some people perfomed upgrade
without errors, but some have trouble to back to 2002 after,
or frozen after boot WM2003.
Its not clear for me and I think for some others here, why
on the same device, different results expected.
merci
leon
Click to expand...
Click to collapse