Windows Media Player problem plz read - JAM, MDA Compact, S100 General

my Windows Media Player in my Magician does not save the last audio volume it always remains at 70 if i close it and re-open it whatever volume i set it to e.g. 100%.
the other thing is that when i decrease the volume to 0% i can still hear the song playing albeit in a more quiet volume.
anybody faced this problem before? please help
many thanks in advance

once upon a tima i had the same problem.
it has to do with the system volume (tap the speaker in your task bar to adjust). if you set up this volume to 70% your media player will take the same value. just change your system volume and the wmp will change, too

i have the same problem... the system volume is set to 100% but player still comes up as 70% everytime. any reg hack?

Same here...
Although I wanted to turn the volume down really low so I could listen to music at work and still hear whats going on around me. Which you can't do. Even if you set it to 0% (with the system volume at one notch off mute).
Have had to buy a set of headphones with an inline volume control...ho hum..
My player volume stays at what I set it to though.
Cheers
Gaz

Here's the fix for your problem
http://forum.xda-developers.com/viewtopic.php?p=226814#226814

Related

Wizard volume control: WTF?

I think I just about destroyed my hearing this morning starting up some tunes on TCPMP. With volume level at 1, it was so loud that my ears are in pain right now. I can never seem to get the volume to work properly with the headphones that came with the device.. either the music is too loud, phone too soft, system noises too loud, etc.. Has anyone had this issue? Also, what's up with only 6 volume level settings? Is there some kind of a 3rd party volume control around that might fix some of my problems?
normalise them with any wav/mp3 editors 1st...
have you tried adjusting your headphone volume? Probably it's set to too loud thats why even at volume 1 it's blasting.
1)Use the volume slider on the headphone cable
2)Set TCPMP not to use the system volume. That way I always have the system sound at max setting, and then set between TCPMP's setting and the headphones' one.
TCPMP volume etc.
I have the system volume disabled and use the pre-amp's volume on TCPMP, which, incidentally, you can set at 0%, 25%, 75% and 100%. 25% is MORE than adequate when watching movies etc. I only use MORTPLAYER for music and I also don't use the system volume.
I leave system volume at 100%.

Windows Media Player Volume

OK my eyes hurt from looking. Can anyone tell me if there is a way to increase the sound of media player? I have the volume at 100% yet it is still very quiet. I appreciate your help
Maybe stating the obvious but it will get asked: Have you increased you system volume too? Click on the speaker at the top and the left slider (with the phone icon) is the system volume.
I have a similar issue - but also I find the volume contorl to be non-linear, so will be interested to see what else is suggested here.
Gav.
Yeah, I really with the two were independent, or you could control the ring volume apart from the system volume, or something of that nature. I often have to increase the system volume to hear Windows Media Player. This wouldn't be a problem if the ring volume wasn't also affected.

HELP: Volume on the Touch Flo. music player

the default level of the music player is too high, even though you turn the device volume to the lowest level. any way to modify it?
Hey,
I know it isn't a software solution, but check this out,
http://www.headphoneworld.com/p/Shure_Volume_Control_Attenuator.htm
I'm thinking about getting it as I hate having to take my phone out and don't like the way I can't drop percent at a time on the system volume buttons when listening to music.
With this device you can run the phone volume as normal, and control the signal to the headphones, proportionally without pulling the phone out.
....IB a n e
Actually, as i play more with the HD, i found that when use the setting of TF 3D to adjust the volume, it can reach to the 0% but still outputing a small volume of sound,
that's nice, i can more enjoy the music when my surrounding is quiet.
just share, hope to be useful for you

some questions about customization...

hi there!
i just got my hd last week and i played around with it only a little with help and advise from a friend whos active here on the board...
still i have some questions about some things i was unable to solve:
1.) the sound of my phone while playing music via earplugs is way too loud. while 20% were set as default when switching the phone on in the first place, setting the volume to 1 or 2% still is too loud for me. how can i adjust the sound volume to a more "normal" level? (meaning that i can set the volume to ~5% as "hard to hear anything" and 100% as "extreme loud"). don't get me wrong. i like loud music but this is definitly too much... using the slide2play-player is sth like a workaround for this since it comes with a seperate volume controller but this isn't a real solution...
2.) how do i set the sound volume via the side-buttons in SMALL steps? like 2% per click. clicking up or down once in/decreases the volume by ~20%. this is no way to use this. especially combined with problem #1...
3.) this is nothing software-related, but i'm searching for a (wired) headset for my touch hd with a control on it to adjust the volume, control the music player (play, pause, next and last track), take and end calls. like the hpm-82 for sony-ericsson handys. important: in-ear-plugs! searched around a bit, but found nothing...
noone here with an idea?
For me was also very loud, but now i'm using WMP with which also i can adjust loudness.....But with any player and you can adjust with it....
for #1: is there a "general" volume setting (somewhere hidden in windows) i can adjust?
there are some tweaks in advanced config which help you BOOST the volume but for decreasing it i dont know. anyway about #2 it's an issue that i would like to see solved as well... i somewhat managed to sortof workaround it by invoking the menu screen with the volume hardkeys and then tapping on the desired volume level directly with finger. of course it's all but handy, still it works.

Volume control in Media Players

Am i the only one totally baffled by the volume control?
in the HTC media player tab, it seems to move up and down through items instead of changing the volume (which seems ridiculous to the extreme)
However - once for me it did change the system volume rather than changing the items - and i have no idea why?
how are you supposed to change the volume while listening to the media player?? the only way i can find it to navigate AWAY from that tab and then use the volume keys!!!
So... i gave up on the HTC media player... and used windows media player....
the volume control was working fine.. it changed the volume in windows media player
THEN (again - i dont know why!!!!) now it doesnt change the windows media player volume -it changes the system volume - i get a little half screen green and grey popup over the bottom half of the screen - its not even the same volume control HTC app as in the rest of the system?!??!
so can anyone tell me..
1) how on EARTH can i get the volume control to consistently change the volume
2) ideally it would do this without having to unlock the device!
yes this really pisses me off. especially because yesterday even in music player it DID change the volume and not the song.
Ok AEBPlus solved it for me. i've set it to ALWAYS use those buttons as volume (and it works while the phone is locked) conrols on the headset to skip tracks backwards and forwards
if only audio manager didnt crash every 60 seconds
and this is ridiculously poor for a £500 device!!!! i dont expect to have to install russian freeware to change the volume on my media player!!!!

Categories

Resources