Related
I have an i-Mate (v1.52.00WWE) and two (2) BlueTooth headset devices:
Parrot CK v3.11 - Car Kit
M3000 by Plantronics - Ear Piece
Both are bonded, but I guess I can only ever set one as my default at any time (obviously you can't have the call ringing in two places at once - but that would solve the problem!).
Is there a way of switching between them simply?, or having them 'auto select' the correct default profile?, or having them both active at once? I currently have to rediscover them to switch.
Would this be made easier if the i-Mate had both Headset and Handsfree (?) profiles? Is this available?
Hope its not such a silly question :lol:
Thanks in advance,
Ian
I have BT carkit, and BT handsfree,
and I have the same problem.
With my Nokia 6600, it works great,
there's no "default profile",
both works.
Even more confused now
Thanks for the reply - I'm even more confused.
What I ment to say that with the 6600 it works great, :lol:
unlink the i-mate pocket pc. :roll:
I have just purchased the xdaII and found this problem too...
Have you found out any more info on this?
The only thing i can do at the moment is rename the bluetooth device and it then prompts me to set as default...
Ta
Christian
Thanks for the tip
No I have not found out more.
I tried the widcomm drivers, but found headset was all screwed up.
Thanks for the tip on rename. I have been deleting and recreating.
Now we only need a application on the Today that can rename the two BT devices and back.
Maybey a reg.key-file we can 'click' ??
One more of the shortcommings of XDAII in anything related to the BT sofware.
I read about a new ROM version comming out soon, that is supposed to fix the those BT problems, Has anyone more info on that?
:?:
IanF said:
I have an i-Mate (v1.52.00WWE) and two (2) BlueTooth headset devices:
Parrot CK v3.11 - Car Kit
M3000 by Plantronics - Ear Piece
Both are bonded, but I guess I can only ever set one as my default at any time (obviously you can't have the call ringing in two places at once - but that would solve the problem!).
Is there a way of switching between them simply?, or having them 'auto select' the correct default profile?, or having them both active at once? I currently have to rediscover them to switch.
Would this be made easier if the i-Mate had both Headset and Handsfree (?) profiles? Is this available?
Hope its not such a silly question :lol:
Thanks in advance,
Ian
Click to expand...
Click to collapse
I just rx'd my Plantronics M3000 headset. It bonds to my XDA2 but I cannot for the life of me, answer or make a call with the headset.
1. When searching for a Bluetooth device, it finds the M3000 by Plantronics
2. I highlight it & tap next
3. I enter the bond code
4. I give it a name & tap finish.
Then it asks me, "This Bluetooth device supports headset profile, would you like to set it as your bluetooth headset?"
I answered Yes but I can't do the calling. Should this be answered No?
I originate a call on the XDA2, when it connects, I press and release the headset TALK button, hear a tone in the earpiece but the call never switches to the headset.
I have the green 3 sec blinking green light so unit is on. XDA2 has the blue indicator blinking.
Any feedback would be helpful since you do have the Plantronics,
Regards
Craig
Hi cshields1!
I don't have a Plantronics, but two SE HBH 30 and HBH 35 that work "somehow" with my XDAII.
First I would reccomend you to upgrade your ROM, since the Bluetooth radio stack of version 1.06.01 seem to have improved a bit over the previous ones (just in case you haven't yet)
Second, no matter what you do, actually you would NOT be able to initiate a call from your headset, you just can answer an incoming call and end a call, that is with the poor BT support in the XDAII.
Third, I'm not sure what you do, but please check:
- once your headset is bonded, turn your BT setting back to ON (BT icon on the bottom right of the Today screen)
- be sure your phone is NOT in flight mode
- Check that your "BT headset mode" in Today Screen is enabled
Tell me if this works.
:wink:
Hi all
I just got my SonyEricssion HBH-662 headset and I observed that if I press the "Call handling" button when the headset is not in a call, my magician will emit a beep, as if a button have been pressed, but nothing happens after that.
This makes me think that maybe the press of the button was received by the magician, but it doesn't know what to do with it and ignored it. Anyone have any suggestions on how to explore this further? Maybe this can lead to the possibility of activating MS Voice Command through this button???
Thanks
Slider
ps. I am using QTek 1.12.00 WWE (with MKS bigrom modification) rom
Hi,
I have HBH-660. There is a tone if I press the button for about 2 second. And if I continue press the button it will shut off.
I don't think HBH-660 can be used for Microsoft Voice Command with O2 mini
Sorry to let you know that.
Arto
I mean HBH-660 and HBH 662. Both almost equal in the specs.
Arto
Hi Arto
My HBH-662 beeps after pressing the button for 2 seconds too. But not only does my HBH-662 beeps, but my Magician beeps also in response to the button press. To me, that seems like the Magician gets the button press, (because the Magician beeps), but just don't know what to do with it. So if we could some how map that press to activate voice command, then it will be the first headset to be able to do so with the Magician (I hope)....
Yes, the HBH-660 is similiar to HBH-662, but HBH-662 uses Bluetooth v1.2, while HBH-660 uses v1.1. The Magician uses v1.2. I don't know if this make a difference though.
Slider
My HBH-660 also behave the same. I think o2 mini just try to see whether HBH-660 connected via Bluetooth or not connected.
If HBH-662 capable of doing microsoft voice command, I'll buy it no matter if the price 2 or 3 times HBH-660. But I think it is not. Others like Motorola HS-850 also have 1.2 bt spec. But nobody have it work with voice command.
Regards, Arto
Does HBH-662 display caller's name?
Hi guys,
I'm about to sell my Jabra BT800, because it's only able to display caller's phone number, not name, while using it with Magician. I also have ROM & radio 1.11 WWE.
Could Sony Ericsson HBH-662 solve my problem? Does it display caller's name? Any tweaking or ROM upgrading required to get this working?
Thank you in advance for your answers.
As I said in the other thread, IMO the way forward for VC BT Activation on the jam is to find out what Eten did to the M500 to get it working.....
Re: Does HBH-662 display caller's name?
I have the same hardware/firmware and am using HBH-662. It shows only phone number and no name. So don't need to sell your BT800.
As for the beep - if I press briefly on my HBH-662, my i-Mate Jam will respond by a beep. Usually after this the headset symbol will show up (usually disappears after a while).
tboonyar said:
Hi guys,
I'm about to sell my Jabra BT800, because it's only able to display caller's phone number, not name, while using it with Magician. I also have ROM & radio 1.11 WWE.
Could Sony Ericsson HBH-662 solve my problem? Does it display caller's name? Any tweaking or ROM upgrading required to get this working?
Thank you in advance for your answers.
Click to expand...
Click to collapse
HBH-660 display inconsistant
My HBH-660 displays caller-ID or caller name inconsistently. Sometime it is caller number, and sometimes it is caller name. Is there any reason to that? Can;t seem to find out the cause for displaying only the caller number and not caller name....
i have the hbh-30 and when i press the button on the headset it keeps beeping ever second or so and keeps doing that, the headset symbol pops up on my jam and it keeps beeping. to stop it i have to press and hold the button on my headset and it off.
if you guys are having issues with number & contact showing up, why dont you try the bluesoil stack?
Try this:
http://www.eten-users.net/topic198
Friends,
I have the EXEC and when im using TOMTOM i receive a call, does anyone know how to answer it and Enable the handsfree speaker? I found that i was driving, and i got the call alert and pressed Answer, however i had to pick the exec up, and use it as a normal hand-ear. Anyway of enabling Hands Free?
MANY THANKS
Try holding the Green Button until the speaker is activated + - 3 Seconds
Then switch of Aircon / radio / close the window ...
I must say that Radio 1.06.00 improved the Speaker volume
Regards
Skillie
or buy a bluetooth headset (circa £30 these days) and configure the auto answer feature.
Even without auto answer on my MDA Pro interupts TomTom with the usual call anouncement and I simply hit the button on my headset to accept the call.
i'm having the same problem..
when i use tomtom with bt gps.. and my bt headset.. i cannot make or answer any calls..
the ringtone doesn't sound normal either.. (no continues ringing)
multiple bluetooth devices problem?
TomTom & Nokia Car Kit
I have a similar problem,
I am using a Nokia CK-7w BT Car kit, and a generic BT GPS receiver.
Upon receiving a call, the phone rings as normal, swtiches the stereo off and I take the call - however once on the call I lose the connection to the GPS receiver.
IT must be possible for the two devices to work together as I always receive the calls through the Car Kit.
Any ideas?
TomTom & Nokia Car Kit
I have a similar problem,
I am using a Nokia CK-7w BT Car kit, and a generic BT GPS receiver.
Upon receiving a call, the phone rings as normal, swtiches the stereo off and I take the call - however once on the call I lose the connection to the GPS receiver.
IT must be possible for the two devices to work together as I always receive the calls through the Car Kit.
Any ideas?
Dunno, my O2 Exec with Tomtom 5.2 has no problems. I use a globalsat receiver and currently a Moto HS820 headset, (previously a Jabra BT200, but I broke that).
Navigates fine, when I recieve a call, tomtom is muted, the exec and the headset ring, I press the answer button on the headset, and can take the call, Tomtom will continue to navigate without voice prompts. Finish the call via headset button again and Tomtom becomes un-muted and continues as before.
So the Exec version of the universal at least is more than capable of managing the tasks you require via multiple bluetooth connections. I run in corporate mode if that makes any difference.
tomtom 5?
Im using tomtom 5.21 (i think) with a Bluetooth handsfree kit. Jabra over the ear type. When a call comes in and TomTom is runnin a message flashes up on screen notifying of incoming call. I can answer the call using the soft answer button on screen or by pressing the pickup button on my headset. When I do the message on screen goes away and TomTom carries on just with the sound muted. When I hang up by pressing the call button on my headset TomTom unmutes itself.
Certainly with a bluetooth handsfree kit I have found tomtom works really well.
I've just got jabra bt800 to match my xda atom. I've paired the earpiece with my atom. It works fine when receiving and making calls. However I really want to know how it can initiate voice dialup program by clicking buttons on my bt headset. I tried different ways even combination of buttons. It didn't work!!!!!! I think there must be some work 2 be done on the registry.
Can someone help me out????
btw, if I hold the call button on my headset, the phone software switches on
I am using a Plantronics 510 BT headset, but i can't figure out how to get the voice activation working.
I beginning to think that it is not supported, read the manual and afaik it doesn't mention the subject at all.
Has anyone got it working yet?
Tiemen said:
I am using a Plantronics 510 BT headset, but i can't figure out how to get the voice activation working.
I beginning to think that it is not supported, read the manual and afaik it doesn't mention the subject at all.
Has anyone got it working yet?
Click to expand...
Click to collapse
I am not sure I understand your question but I use a SonyEricsson stereo BT headset and when I press the "answer" button on the headset (when phone is not ringing) the "Voice Speed Dial" program comes up.
It does the same with all my jabra
Yes the voice dial function to dial numbers and startup programs is what I meant.
I got it working now
Apparently I have to hold down the button for a second or two to make it work.
Next time I should try a little harder to figure it
anonimo said:
I am not sure I understand your question but I use a SonyEricsson stereo BT headset and when I press the "answer" button on the headset (when phone is not ringing) the "Voice Speed Dial" program comes up.
Click to expand...
Click to collapse
Hi,
I've got a SE BT HBH-660 and when I push the asnwer button, I4ve got the "beep beep" in the speaker telling me that the Headset try to connect to the phone, but for some reason the Phone does not wake-up each time.
To make the voice dial working I need to ON/OFF the BT stack on the phone side.
When my SE BT headset is on and I make a phone call, not all the time the phone connect to the headset.
Did someone figure out the same behaviour ?
If yes how does it solve this ?