Related
go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.
Very good tip...will try that!
Cheers...!
Works on QTEK S100 with Jabra Bt 250 Headsets?
Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!
...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?
for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?
Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.
yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.
blueangel
would this work on a blueangel running WM5?
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....
Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.
sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.
I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.
Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.
Mine is working fine. I really like the way its now.
Thanks a lot.
Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.
Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..
The btagsvc.dll on the Universal does exist, but it is empty (same with the HID dll). So that may be the reason why Audio Gateway is not working (getting the system sound forwarded to the BT headset).
Now, a friend showed me an interesting trick. Run a music file or any other program that outputs sound (like a navigation instruction from TomTom) and then press the Speed Voice Dial button.
Interesting, isn't it? So maybe all we need to do is prevent SpeedVoiceDial from exiting again?
Hey!!!!
A2DP is already there...just do a search :lol:
hdubli said:
Hey!!!!
A2DP is already there...just do a search :lol:
Click to expand...
Click to collapse
If you're talking about the M$ stack on the Universal, then you'll have to elucidate a bit more than that - unless you mean:
"The A2DP profile is introduced in AKU 2.0 of Windows Mobile".
But then isn't that scheduled for first quarter 2006. Even then, surely it's down to HTC to make it available for the badging suppliers, o2, T-mobile, etc., to decide IF and WHEN to issue the update.
I tried the LaunchAPEnable = 0 registry hack but it won't stick. My Jabra 110 headset would only receive the audio for a few seconds and then it would all fall back into the Xda Exec. I'll try another headset just to be sure but I'd have to agree - this seems far from being solved.
EDIT: indeed it works with another headset (Solteras Halo). Is the Jabra too agressive in it's power saving quest?
nice to see its doing you head in master :lol: :lol: the jabra bt250 is the same as is my logtech and motorola bluespoon 3-4 secs via voice dial and nothing
nice to see its doing you head in master :lol: :lol: the jabra bt250 is the same as is my logtech and motorola bluespoon 3-4 secs via voice dial and nothing
I've been using a bluetooth headset (Jabra BT-800) to listen to audio books just fine on the JarJar Universal. There are two ways (so far) to get it to work. One, if you install Microsoft Voice Command and use the registry hack found in this forum to make it the default via the Voice Dial button, run it, then let it cancel on its own, the BT audio connection stays intact for running regular audio through it.
The second (and free) way is to use a utility found in the I730 forum in pdaphonehome.com called BTAudioToggle. Written for the I730, it works on the Universal too. I imagine it will work on all the flavors of the Universal. Connecting your BT headset, followed by running this BT app will also activate the BT audio connection. Its pretty rock solid though its mono, not A2DP
Nice application but it only works for Universal for a few seconds. Then it returns to the device with the voice dial application activated.....
So, it seems that I have to disable the voice dial application. Anyone knows how????
Thanks in advance.
Cheers,
I tried the BTAudioToggle on the Xda Exec, and it doesn't seem to do anything .
@chris_khho: try a different headset. As I wrote the Solteras Halo was working fine with the registry hack but the Jabra 110 would only work for a few seconds. I'll need to check what profiles each of them suports.
RE
Hi!
BTAudioTogggle works on my QTEK 9000 for a few seconds when Voice Speed Dial is activated. Once Voice Speed Dial ends the music transfer stops
:roll:
Mine works fine and I've played my audio books for more than an hour and it never dropped. I'm not sure why it doesn't work for you guys. Maybe the reason the BTAudio hack works is because the MS Voice Command setup is installed and the BTAudio hack just makes use of it.
You know, now that I think of it, I have an I730 too and before the BTAudio hack came out, I was already using MS Voice Command to activate audio over BT. I think there's a (good) bug in Voice Command where VC does not release the audio stream if you activate it, then don't give it any commands. The BTAudio hack just made it easier to activate.
OK I see.
I tried this:
hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
And it works with my i-tech clip s and jabra 258 (not sure the model no.), and WMP but it doesnt revert to BT headset after finished call....
Yes it is "mono" but its good though....just wait for AD2P..... Many people are working on it I think.....
Great People Great Work!!!!
Cheers,
Any more info on what each update fixes.
Of particular interest is the bluetooth patch????
Ok I see.
I tried this:
hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
And it works with my i-tech clip s and jabra 258 (not sure the model no.), and WMP but it doesnt revert to BT headset after finished call....
Yes it is "mono" but its good though....just wait for AD2P..... Many people are working on it I think.....
Great People Great Work!!!!
Cheers,
_________________
Chris
Thanks Chris,
I have a o2 exd exec with the h500 and this works perfictly
Jeff
Hi all,
I have Qtek s100 since exactly 2 years. I am very happy and even after relasing so many HTC PDA phones after that, I really did not think of changing my phone. Now I see P3600 as probable candidate to replace my S100. But in addition to size and processor, I would also be looking at some key features as justification to change. I am not going to use 3G or 2MP camera. so, lets narrow down to Free/very cheap phone function on this phone.
- anybody tried to install Skype client to make audio calls on wifi connection?
- Also anybody checked function of SIP voip client like SJPhone again using wifi?
If these features are going to have problem with.. I would still stay back with S100 happily.
AS
Skype works fine on it and I run VoIPSurfer for SIP without any problems!
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
This is only available on the Eten X500. I finally decided to get this instead of the Trinity coz I dun use the 3G and the GPS is a lot better on the X500.
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
It is a limitation in Skype. Try using a headset. Not BT though, since the processor can't handle both Skype and BT headset at the same time..
With my LOOX 720, we also have a "large" speaker (badly positioned even if you wanted to ignore that it is a loudspeaker and put it in your ear) and a small "phone" speaker (placed correctly where you would put your ear), although FSC never released any VoIP app for the device (and LOOX is not a phone).
Skype (and other VoIP apps) worked as you say. Audio was coming out of the main speaker, plus they (Skype) ignored our requests to use the correct speaker (or didn't know what to do about it).
Then some guys noticed that the small speaker was ALWAYS outputing audio (in apps/games etc.), but since it is a small phone speaker, you have to put your ear on to hear it. Also this gives more "depth" in 720 audio (since the tiny speaker does its part). Anyway, that was an interesting discovery because it led to research that gave something more important:
A simple registry entry could shut-off the main speaker while keeping the phone speaker working! No need for soft reset or anything! Some even made a little program for this (which also keeps different volume levels for when on and off since eg. I want volume=2 when loudspeaker is on and volume=4 when only ear speaker is on). Toggle it whenever we want (I have a shortcut in my today screen for it).
So I am thinking... look for something like that in Trinity also? It should even be simpler because I am sure Trinity has pretty clear and distinct volume values for both speakers (since this IS a phone after all).
Maybe a shortcut to a registry key could allow to control the speaker volume... like in the loox. I'll try to search registry... Anyway, this is a known issue for skype, so probably they will be working on that on future releases, maybe it needs customization for every particular model. _http://forum.skype.com/index.php?showtopic=71698
Skype and Bluetooth
I use a stereo BT headset and it works great (iTech clip S38). I used another program to toggle, but battery life went to a couple of hours, even when not in use. If you Skype a lot, or even once on an international trip, the cost is well justified.
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
It is possible now with the last final (not beta) version of Skype (2.2.20 or something like that).
The problem is, this final version doesn't work for all phones. You can see the list of supported devices on Skype download page.
The Trinity is not supported on this final version. You can only use chat function, and when you place a voice call, the application automatically shut down.
That's why we keep running the previous beta versions, which work fine, but the sound come from the back speaker
I tried this final version on my wizard, and I confirm that the sound does come from the ear-piece, for the first time in skype history. But strangely enough, this 'new' skype is only compatible with 'old' phones...
The text found below was sent to Skype by me today
Dear Skype,
#1 please sent me a list of supported Pocket PC’s that work with skype and with a Bluetooth A2dp Headset.
The one I have now can be found at: http://www.jabra.com/Sites/Jabra/NA-US/products/Pages/JabraBT8040.aspx and I works really well for windows media mobile.
#2 I currently have the following device which does not work with Skype for the Pocket PC with an A2dp headset. I am very upset about this; I really want to use your skype out service, but cant.
My Device Information: Unlocked
HTC P3600, Trinity
ROM version: 1.23.405.2
ROM date: 03/11/07
Radio Version 1.38.00.11
Protocol Version: 32.71.7020.12h
ExtROM Version: 1.23.405.103
I have installed the following versions of Skype for PPC
SkypeForPocketPC-2.0.0.51-LowCPU.cab
SkypeForPocketPC-2.0.0.51-LowCPU.cab
SkypeForPocketPC-2.2.0.18-Beta.cab
kypeForPocketPC-2.2.0.20-Beta.exe
SkypeForPocketPCNew.CAB
The only one that works is the SkypeForPocketPC-2.2.0.18-Beta.cab it works perfectly for the HTC P3600, Trinity however, "only" when you use the corded headset that attaches to the mini usb on the phone, or just the speaker that is on the back of the phone the “external speaker”.
the SkypeForPocketPC-2.2.0.18-Beta.cab, I feel, does not work with any A2DP Bluetooth headset.
I have tried the following A2DP Bluetooth headsets
JabraBt8040
Link: same as above
Plantronics Voyager 855 Stereo Bluetooth Headset
Lubix UBHS-NC1 Stereo Bluetooth Headset
I think something goes wrong when the Bluetooth stack tries transfer the Skype audio to the Bluetooth headsets it gets all messed up with lots of echoes and sound disconnects and, latency and so on. However playing any multimedia files on the phone work perfectly through my A2DP Bluetooth headset.
Like a said SkypeForPocketPC-2.2.0.18-Beta.cab works perfectly only when you use the corded headset that attaches to the mini usb on the phone, or just the speaker that is on the back of the phone the “external speaker”.
I have also tried to use a whole bunch of 3rd party applications that redirected the sound to my older mono headsets. I tried three of them, and that did not work either. It’s something when the speaker sound gets transferd to any BT device.
(((((( Update I just used the the btaudio.zip that qyach posted: http://forum.xda-developers.com/showthread.php?t=289720
it works but the mono sound is still not very good, nothing like a mobile phone call sound, and no ware near the sound quality with the corded headset that came with the HTC P3600 What to do,, anyone?
Im thinking of getting a ETEN X800 http://www.smart-mobile-gadgets.com/welcome/cart.php?target=product&product_id=1128&category_id=40
I read that It works well with Skype, and the sound is sent to the phones earpiece after installing a piece of software that ETEN developed called Skype Switch, therefore it should work with a BT headset.
http://64.233.169.104/search?q=cache:cwIdCCuH2LEJ:www.etenblog.com/2007/11/13/getting-skype-to-work-as-it-should/+skype+Switch+program&hl=en&ct=clnk&cd=2&gl=us
But now some sales man who sounded like he know what he was talking about, said that the ETEN phones are flaky and that 70% of the ETEN phones that he sells get returned.
I don’t know what to do, but, dam it I want a WM5 or WM6 Phone that works perfect with Skype sound BT and all.
Now the only problem is how much better or worse is HTC V.S. ETEN? I really am looking for a cool looking phone something small and sleek that will work perfect with Skype mobile. The ETEN X800 looked like it was the solution. But now I don’t know what to do.
Someone please help.
Update: 02/16/08
I Just got an ETEN x800 and istalled the Skype Switch and took skype for a test run ,, ya,ya, the sound gets redirected to the earpiece,,, ya, but it sonds like sh_t also..
Someone out there has to be able to Hack this mess.
DTMF ,Fring, PPC Skype, And A2DP.
For the Skype sound problem not going through the BT headset someone on this site suggested using fring which is a fantastic idea, however it’s always something... with fring you can place a Skype out call but during the call you can’t navigate company’s phone menu during the call like, “press 1 for billing” “press 2 for sales”. There isn’t even a dial pad. When I contacted there support department I got this:
Hello,
Thank you for contacting our support team.
Currently, it is not available to dial DTMF sounds on fring, this should be implemented in future versions. You can stay up to date on new releases from our blog http://www.fring.com/blog/
In other words, I’m not holding my breath.
Is there a way to transmit a DTMF signal to the input of a Bluetooth A2DP headset? I don’t mean literally, just a sound redirect, in other words trick it into thinking it’s me making the DTMF sound.
I can’t find anything on the net except for Dial-a-matic, which will not work. I also took a look at Pocket Dialer v1.03 but there is no way to redirect sound. I also thought that maybe Kai’s ContactDialer would work but I don’t think it does, or I don’t understand how to use it and get it to work.
I also wonder if all of these problems are salved on WM6 I was looking at upgrading to the new HTC P3470 but the processor is slower than the p3600.
God,, do I want to get rid of that stupid weird mini HTC usb headset, ridicules for a $700 phone.
I wouldn’t need to go through all this if Skype would just finally fix their PPC version to work with a Bluetooth headset.
(((((( Update I just used the the btaudio.zip that qyach posted: http://forum.xda-developers.com/showthread.php?t=289720
it works but the mono sound is still not very good, nothing like a mobile phone call sound, and no ware near the sound quality with the corded headset that came with the HTC P3600 What to do,, anyone?
Im thinking of getting a ETEN X800 http://www.smart-mobile-gadgets.com/...category_id=40
I read that IT works well with Skype, and the sound is sent to the phones speakers after installing a piece of software that ETEN developed called Skype Switch, therefore it should work with a BT headset.
http://64.233.169.104/search?q=cache...lnk&cd=2&gl=us
But now some sales man who sounded like he know what he was talking about, said that the ETEN phones are flaky and that 70% of the ETEN phones that he sells get returned.
I don’t know what to do, but, dam it I want a WM5 or WM6 Phone that works perfect with Skype sound BT and all.
Now the only problem is how much better or worse is HTC V.S. ETEN? I really am looking for a cool looking phone something small and sleek that will work perfect with Skype mobile. The ETEN X800 looked like it was the solution. But now I don’t know what to do.
Someone please help.
Hello folks!
I know this is a pretty App-specific question, but has anyone managed to get Skype working on the universal with a bluetooth-headset?
Since Skype is not really an "incoming/outgoing phone call" the headset is not activated and I can only get audio through the built-in speaker/mic or a wired headset. (both of which is annoying)
Any ideas on how to trick Skype into using Bluetooth-Handsfree for IO?
Not sure why, but I have been told Skype works with bt-headsets on other devices flawlessly. Is there anything special about the Universal that could apply here?
I already asked this in the official skype-forums, but only got the usual "mobile devices are not officially supported"-answers....
There is a program you can use that will redirect all audio output to BT - I have made Skype and BT work this way. I can't remember what its called so do a search.
The program is "blueMusic"
Thanks for the reply, will try that.
Does this software only redirect output or does it also activate the BT-headset's microphone for recording?
I had luck using Helmi's Widcomm bluetooth stack. Search for it in the Universal forums. It's pretty sweet and treats your handsfree profile device like an Audio gateway.
freak24-7 said:
Thanks for the reply, will try that.
Does this software only redirect output or does it also activate the BT-headset's microphone for recording?
Click to expand...
Click to collapse
It should do both, but, not 100% sure about the latter part
do this change and a soft reset so any time you want can tranfer l'audio to your bluetooth headset , il works with skype and any other application.
hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Yeh, the Blue Angel is a bit strange with some bluetooth devices.
I have the following issues with WM6 on my BA, which did not exist with 2003SE:
1) When Bluetooth is active, the device turns on by itself every minute or so. I understand that this is a hacked "feature" to prevent the bluetooth from turning itself off. This is probably the most annoying thing about WM5/WM6. Is there any fix I am not aware of?
2) When I start from scratch and pair my carkit (Parrot), everything works OK, except that BA's sound putput, i.e. for Microsoft Voice Command, is coming from the BA instead of the car kit. This is too low a volume, to be clearly understandable in a car. With my Universal (also on WM6) this does not happen.
3) After pairing my Asus GPS, nothing works. If I delete all paired devices and just pair my Asus without being in range of the car kit, it will work. If both devices are turned on (car kit and GPS Receiver), none works properly.
I don't use my BA on a regular basis anymore, because I have my Universal, which works flawless. However, I see no paint in upgrading to WM5/WM6 if one ends up with LESS functionality than the original 2003SE.
The only feature I will be missing is the fact that no RAM memory is used, which means one does not loose everything when the battery drains.
Are there any tips to solve these three problems?
The WLAN "bug" is not really a problem: even with 2003SE I had to occasionaly start and restart the WLAN for it to work properly.
Cheers,
vma
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
problems i still have:
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- how can i find out what BT stack i have?
- i installed that Boradcom stack 1.7 without having any succes in getting my headset to work. with or without patch1 and htcheadset! any ideas?!?
- what excactly is that HTC HEADSET ADDON ?
please answer soon, any help is very much appreciated!!!!
thx in advance,
krz
1. Same here; i think is my hands free set limitation.
2. I get the same using the Broadcomm stack; use the MS stack.
3. Depends; if you use Broadcomm/Widcomm, you have an "about" box; if you use MS, i don't know.
4. i get it working, but with audio in hands free AND speakers; annoying.
5. don't know, try Google.
DANDANA said:
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
Click to expand...
Click to collapse
What Bluetooth Stack you use ?
First, I use the existing MS Stack on Helmi WM6. BT GPS and Handsfree couldn't run at the same time.
Second, I use Broadcomm Stack 1.71. BT GPS and BT Stereo could run at the same time, but Hands-free function didn't run at all.
Give me a light please.
your bluetooth headset
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
shazzy84 said:
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
Click to expand...
Click to collapse
Yeah, Bluetooth in BA really sux... you have to choose your bt handsfree wisely, make sure you try it on BA properly before buying it... currently I am using i clip II mini, and it is giving me the same behaviour as shazzy84's
KRZTF said:
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Click to expand...
Click to collapse
Well I found a way to solve the BTA2DP problem. It supports stereo & is just fantastic. you can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right
Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Admire people who can bring an answer!
I myself only good in learning physical languanges. So need MP3 HeadSet!
Also using SuperMemo CE the most beautiful tool for language learnig!
Is there any other solution then to change the registry and the things?
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
No one to ask for help over here!
My MSN:
[email protected]
Skype:
janicic
MySpace:
www.myspace.cn/taijiyoga