Related
. open it from an editor (ie notepad), it will look like
[HKEY_CURRENT_USER\Software\XDA-developers\IIWPO]
"LastOwner"=""
"Owner"="Me"
"ReportNumber"="+31000000000"
4. edit the following
here is the part i didnt get
help out please
Replace the Me with your name as shown in "Owner info" on the device
Replace the +31000000000 with the number to sms to (=NOT your devices number!!)
instead of +31000000000 ill change it to what? this one??
==>> "(=NOT your devices number!!)" <<==
or
==>> "=NOT your devices number!!" <<==
or
==>> "NOT your devices number!!" <<==
please reply asap. thnx
I think you need to change it to a number other than +310000000...
So change it to a number from one of your friends or family. Then if the device is stolen, and the thief tries to change the owner info, it will automatically send an SMS to the number that you programmed...
If you have probs, or don't understand, ask again...
DEAR ALL,
THIS THREAD IS FOR DEVELOPERS/DEVELOPMENT ONLY!
DO NOT POST ANY IRRELEVANT TO DEVELOPMENT INFORMATION/QUESTIONS/REQUESTS/FEEDBACKS/RECOMMENDATIONS/...
THANK YOU FOR YOUR UNDERSTANDING!
=====
NOTES
=====
Note for Users:
This is not for users yet! ;(
Notes for Developers:
----- <legend> -----
"+" stands for feature added
"-" stands for feature removed
"!" stands for bug fixed
"=" stands for irrelevant to development action was made
"?" stands for information
----- </legend> -----
purpose:
This freeware tool was developed for authors' personal use
disclaimer:
By downloading this tool you are becoming solely responsible for matters relating to the tool including but not limiting: use, consequences, redistribution and etc, and therefore no claims involving authors shall be filed on this matter
requirements:
Pocket PC-based device with .NET CF installed
23-aug-2005:
?: partially on vacations))
23-aug-2005:
+ wap: WSPPost/WSPGet
- http: post/get
?: seeding of frank's old core for cteam
08-aug-2005:
?: project suspension notice (summa vacations))
06-aug-2005:
=: dynamic library is replaced with static by requests of cteam and corresponding seed is published
?: no changes have been made to draft version of the code
01-aug-2005:
?: announcement of the developoment plan in the form of code layout and consequent draft version seeding to corresponding developers
30-jul-2005:
?: announcement of the idea
==========
SETUP/USAGE
==========
(SETUP)
1) Copy files to \windows folder
2) Create MMS/GPRS connection for your operator
3) Run \windows\MMSd.exe
4) Fill your operator's data in
(USAGE)
5) Now you can send/receive MMS
6) When MMS is received a message box appears asking you to "Download it now". Just choose to download it now
7) Wait for "Download Complete" message. Tap "Ok" and wait for "Files saved" message
8) When "Files Saved" message appears just choose to "Read MMS now". This will open your MMS in Pocket Internet Explorer
9) To send MMS: use Windows Explorer to find your multimedia file first
10) Then, tap and hold on this file until you get "Deliver via MMS" option in your tap-&-hold menu
11) Choose this option and fill in all needed information
===
FAQ
===
q: I got error while downloading my MMS can I re-download it?
a: Open your \Temp folder, find file with "Envelope" icon and tap on it. Then choose to 'Download it now'
q: to correctly display name of senders
a: make sure they comply to int'l notation of +{country code}{area/city code}{phone number}
q: 3gp/mp4 playback
a: You need to use external player to play content of such type
q: where are the notification messages? i.e. New MMS received and etc...
a: First, uninstall all other MMS-related software (ArcSoft's, EZWap's, Pixar's...) and Second, check your operator's service timeout policy, e.g. when you don't pickup MMS for a while your operator may disable this service for you and you will need to re-activate it again
I have a problem
I have XDA II and I've install this application, and saved the configuration now when i try to send mms say:
Error
mmsd.exe
ArgumentOutOfRange Exception
String::. ctor+0x25
String::. Substring+0x19
MMS:: ReadMMSSetting+0x106
MMS::.Main+0x90
Why?? please help me
a new problem
Hi, i have solved simply to unistall and intall again, now a new problem i try to receive an mms but when I push ok to donwnload now say:
establishing modem connections...
Connection Error
Port opening error, disconnect from other GPRS connections first.
But why? i only set in settings ----> connection the same parameters like in winndows 2003 with apn...... Please help me thanks
Facing some wierd error ...
Could u please help on this... I've succesfully installed your application and have also applied all the required settings. Now whenever I plan to sent a file, it starts sending alomst 6% to 12% of the msg, but then fails and gives me an error claiming that the msg has failed...
Could u plz tell me what I'm doing wrong ...
Profile Name: Fastlink
Setup Name: Fastlink
MMSC address (http): http://mms.fastlink.jo
Gateway: 192.168.55.10 ( This looks like a local ip ???) I checked with my tel company, they told me that's the correct proxy server ip address.
Proxy Server Port: 80 (No place to put that in settings)
Phone Number: +962799753678 (Ticked)
Could u please tell what I'm doing wrong ???
Hi there,
I am trying to change the IMEI of my telephone, as the compagny I work only accepts calls from particular IMEI's. Otherwise you connect to the helpdesk.
We get our phones from the company (I now have a w800i)
There is a guy who bought a new phone, and swapped his IMEI, and now he can use it.
I want the same with my QTEK s200. After a little research I found out that I have got a G3, which is good.
So I downloaded the aWizard to CID unlock my phone.
Unfortunately, I get a memory write error.
Here is the output of the program:
Code:
Initializing............CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
[11:52:54,03] MachinaGod lokiwiz start
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=80: c01bfbc4 - 194d4405ca5a3c83
Key idx: 80
olddata: 1dc8c1d25668fee6cf1fe68e3909881c9a755d0b48d3d48455d9139a00635f1c
newdata: a6c5603436eb0021172bf3cc57b1a8bd7ae6cc16f96812e97ae6cc16f96812e9
newsum=f4044942 encsum=0dabbbed53ee8789
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072745
[11:53:06,80] Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to restore your device if anything goes wrong.
* Press [Enter] to continue
Its on the 6'th last line.
Next up I download iWizard, I open it, and the program reads out the IMEI succesfull, but it doesn't write.
What to do? Can anyone help me out?
If I didn't supply enough info, do not hesitate to ask for more.
I guess a real solution would be not to change your IMEI but to ask your company's administrators to accept your actual IMEI ?
Hi all, i've purchased an SM-G900F but there is a problem, it has rooted.
I've noticed those :
- I can see IMEI number (if i do #*06#) but my EFS folder is empty
- When turn on WiFi , the device will reboot automatically and appear " Factory Mode is On"
- i can make first call with sim , after i'm unable to call , but the 3G network works
- Whit ES File Explorer i've see that my efs folder is empty (But i can see my IMEI with secret code)
- In Device Info i see one time "Official Status" and another time "Personalized Status"
I'm tinking that old owner is a very st......d guy. Howewer these are all information :
Model : SM-G900F
Version : 4.4.2
BASEBAND : NE2
BUILD : NE2
What do you think? How i can solve the problems?
EDIT 1 : i've formatted from recovery , now it ask me to insert the samsung account of old owner...
- Use Phone INFO ★Samsung★ app to obtain more detailed information about your device, including Model, Baseband, Bootloader, CSC, IMEI, S/N, etc...
- May be the Reactivation lock has been enabled. You should ask the ex-owner for the account.
qwertyup88 said:
Hi all, i've purchased an SM-G900F but there is a problem, it has rooted.
I've noticed those :
- I can see IMEI number (if i do #*06#) but my EFS folder is empty
- When turn on WiFi , the device will reboot automatically and appear " Factory Mode is On"
- i can make first call with sim , after i'm unable to call , but the 3G network works
- Whit ES File Explorer i've see that my efs folder is empty (But i can see my IMEI with secret code)
- In Device Info i see one time "Official Status" and another time "Personalized Status"
I'm tinking that old owner is a very st......d guy. Howewer these are all information :
Model : SM-G900F
Version : 4.4.2
BASEBAND : NE2
BUILD : NE2
What do you think? How i can solve the problems?
EDIT 1 : i've formatted from recovery , now it ask me to insert the samsung account of old owner...
Click to expand...
Click to collapse
reactivation lock is on. you will need to contact old owner. There is also a way to "fix" that but not sure if it is appropriate for XDA.
kabloomz said:
reactivation lock is on. you will need to contact old owner. There is also a way to "fix" that but not sure if it is appropriate for XDA.
Click to expand...
Click to collapse
Can you send me an email ? i really need hepl
vndnguyen said:
- Use Phone INFO ★Samsung★ app to obtain more detailed information about your device, including Model, Baseband, Bootloader, CSC, IMEI, S/N, etc...
- May be the Reactivation lock has been enabled. You should ask the ex-owner for the account.
Click to expand...
Click to collapse
The guy was not traceable now. He's vanished ....
You are kinda between a rock and a hard place if reactivation lock is enabled and you don't have the login to toggle that. In most cases that means that the phone is stolen and this is an explicit anti theft feature. You need that login from the original owner. Or if you have the original receipt, you might be able to convince a Samsung repair center to disable the reactivation lock for you.
In any event, as to your original question the most likely cause of the problem is a corrupt configuration file, namely a text file named "factorymode". You can try this repair from the command line or a root aware text editor.
Code:
echo -n ON > /efs/FactoryApp/factorymode
.
fffft said:
You are kinda between a rock and a hard place if reactivation lock is enabled and you don't have the login to toggle that. In most cases that means that the phone is stolen and this is an explicit anti theft feature. You need that login from the original owner. Or if you have the original receipt, you might be able to convince a Samsung repair center to disable the reactivation lock for you.
In any event, as to your original question the most likely cause of the problem is a corrupt configuration file, namely a text file named "factorymode". You can try this repair from the command line or a root aware text editor.
Code:
echo -n ON > /efs/FactoryApp/factorymode
.
Click to expand...
Click to collapse
Just now the guy told me account and password . Now i'm able to use my phone !!!!! But now i see that the efs folder is empty...
qwertyup88 said:
Just now the guy told me account and password . Now i'm able to use my phone
Click to expand...
Click to collapse
Great. But you neglected to tell us if you tried (or even noticed) the suggestion to check your factory mode configuration file. The contents should show "ON" (yes, "ON") and the permissions 0644. Your efs folder may appear empty to you when it really isn't. It depends on whether you have your file browser (or command line options) set to display hidden and system files or not.
.
fffft said:
Great. But you neglected to tell us if you tried (or even noticed) the suggestion to check your factory mode configuration file. The contents should show "ON" (yes, "ON") and the permissions 0644. Your efs folder may appear empty to you when it really isn't. It depends on whether you have your file browser (or command line options) set to display hidden and system files or not.
.
Click to expand...
Click to collapse
y factory mode is on , because i can't acces my wifi, and it appear that factory mode is on. I've set to see hidden files , but now i haven't root on my device
Edit: terminal emulator say : no such file or directory
Edit 2 : Solved with terminal emulator and busy box Thanks to @leoaudio13 for his dump
These are the command for mount efs :
su
mke2fs /dev/block/mmcblk0p12
mount -w -t ext4 /dev/block/mmcblk0p12
reboot
After then , with text editor i've disabled FactoryApp in efs folder tanks to all
.
For the benefit of anyone else reading this thread, do not repeat the steps in the post above until
you understand what they do. A typo in those steps could easily cause you endless grief.
Glad you go it working.
If those steps fixed your issue, then you mislead us with erroneous information earlier. You said that you had an empty efs folder earlier. But those steps would not have been necessary or effective if that was accurate. You must have had a missing efs partition. There is a considerable difference between an empty and nonexistent item and that datum would have led us to a solution.
On a normal phone, there would be an extant efs folder and it would be automatically mounted at boot. A missing folder strongly suggests that the wrong firmware or a flash error took place. Presumably by the previous owner.
Anyone using the make filesystem command mke2fs /dev/block/mmcblk0p12 should be very careful with typos as an incorrect address could cause major corruption that would be difficult to recover from.
.
Originally Posted by qwertyup88 View Post
Hi all, i've purchased an SM-G900F but there is a problem, it has rooted.
I've noticed those :
- I can see IMEI number (if i do #*06#) but my EFS folder is empty
- When turn on WiFi , the device will reboot automatically and appear " Factory Mode is On"
- i can make first call with sim , after i'm unable to call , but the 3G network works
- Whit ES File Explorer i've see that my efs folder is empty (But i can see my IMEI with secret code)
- In Device Info i see one time "Official Status" and another time "Personalized Status"
I'm tinking that old owner is a very st......d guy. Howewer these are all information :
Model : SM-G900F
Version : 4.4.2
BASEBAND : NE2
BUILD : NE2
What do you think? How i can solve the problems?
EDIT 1 : i've formatted from recovery , now it ask me to insert the samsung account of old owner...
Click to expand...
Click to collapse
Ive got almost the same problem, i bought my s5 to a friend who visited Philippines from Korea, He acquired the Phone in a Pawnshop in korea, i restore the phone and now it asked me for a password which i dont know, send it to the Technician, Force to delete the account (dont know how) but the problem is that, Phone has NO SIGNAL from then on, it has a NO signal above instead of a bar signal, EFS folder is empty, IMEI was null 000000000000000.
Anybody has the same experience? how can i fix this? please help.
Not perfectly solved .... After first call it don't connect to the network. Only after reboot it connect.
Any suggestions ?
qwertyup88 said:
Not perfectly solved .... After first call it don't connect to the network. Only after reboot it connect.
Any suggestions ?
Click to expand...
Click to collapse
could be a block imei by the operator? if it is POSSIBLE to solve? or it could be due however to the efs folder, or the firmware, modem?
edreab86 said:
Ive got almost the same problem, i bought my s5 to a friend who visited Philippines from Korea, He acquired the Phone in a Pawnshop in korea, i restore the phone and now it asked me for a password which i dont know, send it to the Technician, Force to delete the account (dont know how) but the problem is that, Phone has NO SIGNAL from then on, it has a NO signal above instead of a bar signal, EFS folder is empty, IMEI was null 000000000000000.
Anybody has the same experience? how can i fix this? please help.
Click to expand...
Click to collapse
it's a different problem , you have a null imei , in your case it's more difficult to resolve.
Originally Posted by qwertyup88
it's a different problem , you have a null imei , in your case it's more difficult to resolve.
Click to expand...
Click to collapse
As you can read i said, Ive got almost the same problem, i don't say we have the same problem. in a sense that previous owner account or the reactivation lock is present. sorry if i made a statement that bothers you, just looking for a solution.
hello guys, always about the efs folder I was reading this post: http://forum.xda-developers.com/showthread.php?t=2705524.
according to you through this tool is possiblile restore the backup I had done with samsung tool? I would like to try this because the efs folder on my sm-g900f is 23kb, but the backup I had done with samsung tool is 14mb !! what do you think?
If you flashed the Stock ROM using “Download All + Format” option in SP Flash Tool or you wiped NVRAM partition accidently then you probably lost IMEIs, WiFi/Bluetooth Mac Address and Serial No.
Disclaimer:
Code:
/*
*Your Warranty is now void.
*Neither me nor the developers of tools are responsible.
*You are doing this at your own risk and will
*solely be responsible if something happens to the device.
*Make sure you only use the original “IMEI_1, IMEI_2,
*WiFi/Bluetooth Address, Serial Number” that came with your phone.
*/
Note:
Although, I have tried to keep this guide as simple as possible, I am assuming that you have already flashed Stock ROM using this thread/guide:
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
Which also means the required drivers i.e. “MTK (USB DA COM, Preloader USB VCOM, USB Port, USB VCOM) Driver” and “Lenovo USB Driver” in the thread mentioned above are also installed.
Requirements:
Lenovo K8 Note with Stock ROM.
Original IMEI_1, IMEI_2, WiFi/Bluetooth Mac Address, Serial Number. (Find on Phone’s box)
SN Write Tool (Download)
Database Files
ADB Tools (Inside SN_Write_Tool\Android)
Basic ADB know-how.
And a PC. (obviously)
USB Debugging:
Before we proceed, make sure “USB Debugging” is enabled on phone:
Navigate to, Settings > System > About Phone > Build Number (Tap 7 times) to enable “Developer Options”.
Now, Enable “USB Debugging” in Settings > System > Developer Options.
Flashing Procedure:
Extract SN Write. (For Example, Location: “E:\ SN_Write_Tool_v1.1916.00”)
Open SN Write Tool (SN_Writer.exe).
Make sure all the Preliminary steps mentioned in below sections have been performed – Obtaining DB files, Configuring SN Write Tool, Understanding Barcode.
Switch off the phone, while keeping the cable unplugged
Click “Start”.
Enter Original IMEI_1, IMEI_2, WiFi/Bluetooth Mac Address, Barcode and press “Ok”
Connect your phone.
Now your phone will automatically boot in Meta Mode.
Wait for the Process to finish.
Now you will see “Pass” message if everything completes successfully.
Now it will again ask to enter the details. Click “Cancel”
The phone will now switch off. Then boot it manually.
That’s it. Your phone is now back to normal. Now, you can see Serial No. in adb too.
Obtaining Database(DB) files:
In order to restore everything we need 2 Database files, which can be obtained by following the procedure below:
Extract SN_Write Tool. (For Example, Location: “E:\ SN_Write_Tool_v1.1916.00”)
Navigate to “Android” folder inside SN_Write_Tool folder.
Keep Shift Key Pressed and Right Click inside the folder. Select “Open Command / PowerShell window here”.
Type
Code:
adb devices
You will receive a prompt on your phone. Select “Ok”. The device will appear in the list. (Something like “0123456 device”)
Now, type these commands:
Code:
adb pull /vendor/etc/mddb Database
adb pull /system/etc/apdb Database
Now, navigate to “E:\ SN_Write_Tool_v1.1916.00\Android\Database”. There will be around 23 Files. We only Need 2 files from that.
APDB_MT6797_S01_alps-trunk-o0.tk_W19.10 (Approx. size 145kb)
MDDB_InfoCustomAppSrcP_MT6797_S00_MANNING_O_Vxx_x_ulwctg_n.EDB (Approx. size 59mb)
Note: Name and size may slightly vary depending upon your firmware.
Copy the above two files to some other destination (optional).
Note: If you are using PowerShell then, instead of “adb” type “./adb”
Configuring SN Writer Tool:
Open “SN_Writer.exe” inside “E:\ SN_Write_Tool_v1.1916.00”.
Now Click “System Config”.
Check “Dual IMEI” (Do not check “Dual IMEI Same” under that).
In Write options select Barcode, IMEI, BT Address, WiFi Address. (If you don’t have WiFi/BT Address then don’t check/select them).
Check “Load AP DP from DUT” and “Load Modem DB from DUT”.
Click “MD1_DB” and select the file that you pulled using ADB i.e.
“MDDB_InfoCustomAppSrcP_MT6797_S00_MANNING_O_Vxx_x_ulwctg_n.EDB”
Click “AP_DB” and select the file that you pulled using ADB i.e.
“APDB_MT6797_S01_alps-trunk-o0.tk_W19.10”
Now click “Save”.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Understanding Barcode:
It took me lots n lots of trial & error and googling before finding the correct (probably) Barcode format that we need to use in SN Writer. Trust me, it was not an easy task. Below are three iterations of barcode, use any:
First Iteration (recommended):
The Barcode field consists if two parts, call them Spaces and Serial No.
Total Length(33 Characters) = (25 Spaces) + SN(8)
For Example,
If my SN written on the box is “XYZ1223W”, my barcode will be (without quotes):
Code:
“ XYZ1223W”
or
Second Iteration (recommended 2):
In this iteration, we'll assume that the Barcode field in SN Write Tool is a combination of three parts. Lets call it First (PN), Second and Third Part (SN). You can find PN & SN on the box of phone. I am not sure about the second part with 15 characters. You can leave the second part, just give 15 Spaces.
Total Length(33 Characters) = PN(10) + (15 Spaces) + SN(8)
For Example,
If my PN written on the box is “AB1D1112IN” and SN is “XYZ1223W”, my barcode will be (without quotes):
Code:
“AB1D1112IN XYZ1223W”
or
Third Iteration:
There can also be a third iteration for barcode, though I am not sure about this and is completely based on my assumption. In the second part, as mentioned above we are leaving 15 spaces, but in this, we will use the product barcode of 13 characters (Refer Barcode No. 2 in the attached image below) instead of 15 spaces
For Example,
If my barcode (no. 2 in image above) of 13 charcters is “0123456789012”, then in SN Writer we will write (without quotes):
Total Length(33 Characters) = PN(10) + (Space) + (13) + (Space)+ SN(8)
Code:
“AB1D1112IN 0123456789012 XYZ1223W”
Note the space after each part, which makes up for two characters that we require.
As you can see in the Screenshot attached in this post, “Lenovo Help” app recognizes the device as it is meant to be recognized.
WiFi/Bluetooth Mac Address:
Though, it is not a big deal if you lost WiFi/Bluetooth Mac Addresses. They will still work fine even without it.
If you didn’t backup nvram before or didn’t note down WiFi/Bluetooth Mac address then you can’t get it back. But, if you did TWRP backup of nvram then you can restore it and get back both the original Mac addresses.
FAQs:
SN Writer not booting phone into Meta Mode automatically.
Make sure drivers are installed
or
Boot Manually in Meta Mode using Power Button + Volume Down. Check Already in Meta Mode.
Do I need to be on Stock ROM?
Yes.
Changelog:
27 September 2020:
Update post.
Added one more iteration of barcode.
Added more Screenshots.
Correct minor typos.
thanks alot man
I managed to get apdb files but when i try your command to get mddb i get that error
adb: error: failed to copy '/etc/mddb' to 'Database\mddb': read failed: Is a directory
any help?
and how to know if my bluetooth or wifi mac address is missing and where to find them because nothing of that is written on the phone box
softmaster3 said:
thanks alot man
I managed to get apdb files but when i try your command to get mddb i get that error
adb: error: failed to copy '/etc/mddb' to 'Database\mddb': read failed: Is a directory
any help?
and how to know if my bluetooth or wifi mac address is missing and where to find them because nothing of that is written on the phone box
Click to expand...
Click to collapse
Edit: Solved
Android will automatically generate Wi-Fi / Bluetooth address if not found. No need to worry about that. Thats why I I have mentioned in the post that it will still work fine even without it.
You mentioned wrong paths, /etc/apdb is fine but /etc/mddb doesn't exist(empty folder was created in latest update but still no contents in it). mddb is under /vendor/etc/mddb. Just to avoid confusion and even to make this guide suitable for users who pull the file from TWRP make the /etc/apdb to /system/etc/apdb
---------- Post added at 01:03 PM ---------- Previous post was at 01:00 PM ----------
softmaster3 said:
thanks alot man
I managed to get apdb files but when i try your command to get mddb i get that error
adb: error: failed to copy '/etc/mddb' to 'Database\mddb': read failed: Is a directory
any help?
and how to know if my bluetooth or wifi mac address is missing and where to find them because nothing of that is written on the phone box
Click to expand...
Click to collapse
instead of "adb pull /etc/mddb" use "adb pull /vendor/etc/mddb"
M.A.P said:
You mentioned wrong paths, /etc/apdb is fine but /etc/mddb doesn't exist(empty folder was created in latest update but still no contents in it). mddb is under /vendor/etc/mddb. Just to avoid confusion and even to make this guide suitable for users who pull the file from TWRP make the /etc/apdb to /system/etc/apdb
---------- Post added at 01:03 PM ---------- Previous post was at 01:00 PM ----------
instead of "adb pull /etc/mddb" use "adb pull /vendor/etc/mddb"
Click to expand...
Click to collapse
thanks a lot guys
u two just made my day
and M.A.P u r a life saver i cant thank you enough for ur work on treble for k8 note and ur help here
M.A.P said:
You mentioned wrong paths, /etc/apdb is fine but /etc/mddb doesn't exist(empty folder was created in latest update but still no contents in it). mddb is under /vendor/etc/mddb. Just to avoid confusion and even to make this guide suitable for users who pull the file from TWRP make the /etc/apdb to /system/etc/apdb
Click to expand...
Click to collapse
Done. Thanks for suggestion.
i did write the serial, check warranty and its good
but noticed that the serial written on phone box is 12 Character long not just 8 and sn writer did write 8 only not the whole 12
is that correct??
softmaster3 said:
i did write the serial, check warranty and its good
but noticed that the serial written on phone box is 12 Character long not just 8 and sn writer did write 8 only not the whole 12
is that correct??
Click to expand...
Click to collapse
May I see the image of your box. PM me the image.
done
softmaster3 said:
thanks a lot guys
u two just made my day
and M.A.P u r a life saver i cant thank you enough for ur work on treble for k8 note and ur help here
Click to expand...
Click to collapse
Your welcome, I'm always ready to help
Hi, with the help of your guide, i have recovered my phone. But the problem is still same as it restarts repeatedly,sometimes it worked for 1 day but then again rewstarting. Is there any permanent solution for this?
psbtheone said:
Hi, with the help of your guide, i have recovered my phone. But the problem is still same as it restarts repeatedly,sometimes it worked for 1 day but then again rewstarting. Is there any permanent solution for this?
Click to expand...
Click to collapse
Show your phone to a technician. It may be due to battery or some other reason.
Im getting remote object does not exist error for both commands
WP7 Barcode
Hi,
I was wondering how did you find the correct Barcode format? I have spent 2 days trying with different combinations and I still have not succeeded in restoring the serial number in my Oukitel WP7. It still gives me the generic serial number 123456789ABCDEF.
oxord said:
Hi,
I was wondering how did you find the correct Barcode format? I have spent 2 days trying with different combinations and I still have not succeeded in restoring the serial number in my Oukitel WP7. It still gives me the generic serial number 123456789ABCDEF.
Click to expand...
Click to collapse
Did some Trial and Error to figure out correct (probably) barcode format. In addition to this, you'll also need specific database files for your phone in order restore it.
kk9999gada said:
Did some Trial and Error to figure out correct (probably) barcode format. In addition to this, you'll also need specific database files for your phone in order restore it.
Click to expand...
Click to collapse
Man this thing is driving me crazy. I have tried every single combinations and did so many googling and there are not a lot of information about this. The other problem is that the Oukitel WP7 does not have a Product Number written on the box or on the back of the device, there is only a serial number and a barcode with 13 numbers under it. I even tried the FCC ID that is written at the top. I have been spending few days trying. I think the only way to know the correct format is to ask someone who has the same device to view it using Maui Meta by viewing the hex format or exporting the NVRAM to an ini file. I doubt anyone would help me with this though. I have the database files from the stock image. Anyways thanks man
oxord said:
Man this thing is driving me crazy. I have tried every single combinations and did so many googling and there are not a lot of information about this. The other problem is that the Oukitel WP7 does not have a Product Number written on the box or on the back of the device, there is only a serial number and a barcode with 13 numbers under it. I even tried the FCC ID that is written at the top. I have been spending few days trying. I think the only way to know the correct format is to ask someone who has the same device to view it using Maui Meta by viewing the hex format or exporting the NVRAM to an ini file. I doubt anyone would help me with this though. I have the database files from the stock image. Anyways thanks man
Click to expand...
Click to collapse
That would be better.
There is no need for Part No. or Barcode (both can be replaced with spaces). The only thing required is Serial No.
kk9999gada said:
That would be better.
There is no need for Part No. or Barcode (both can be replaced with spaces). The only thing required is Serial No.
Click to expand...
Click to collapse
I tried that as well with so many different ways and with spaces and without. I guess the length also matters. I even filled all 63 characters to see if anything changed in settings but it still showed the generic serial number. I am starting to wonder if sn tool is writing the data in the correct location. I am sure I am using the correct database files because I got them from the factory image from the official website and I am able to write the IMEIs correctly.
I am thinking now to go through the serial number which is 16 characters from left to right. Each time I add a space on the left and no spaces after the serial so first try would be only the serial then a 1 space before it then two spaces before it until I reach the 63 characters. This is like 50 restarts and if that does not work I will try in a same manner but this time full up spaces after the serial and do the same by adding one space on the left each time so first try would be the serial number and the remaining will be spaces up to 63 characters the second time will be one space before the serial and remaining spaces after it up to 63 and so one. I know it's crazy but if all that does not work I am not sure what else to do.
Hi
This happened to me with this dangerous spflash tool. WIPED everything. I followed this guide , It PASSES without any errors but doesnt write anything to my phone. Box has a code bar like this 6 970502 270581 then MEID code of 14 characters , than IMEI1 code and a IMEI2 code and finaly a S/N code of 15 characters.
As i said it PASS but doesnt show IMEI, version base band , bluetooth address, Serial number ,
Thank you very much spflash tool. Had to get another phone.
Phone is a MEDIATEK mt6763T.
Only thing that i dont understand from guide is how to enter Serial number in sn writer. Did it many ways. 33 characters and 64 characters with spaces.
If anyone has any idea , please show me the way. thx.