I originally posted this message a few days ago but as there were no responses I thought I'd try again. I'd appreciate any advice - thanks for looking ...
I have a XDA mini S. At home I have a wireless router/hub that is hard connected to my PC, but I connect to internet from my laptop via wifi (direct to router/hub) using an always on broadband connection.
I use WPA security, but when I tried to set up the XDA to connect wifi it didn't seem to have the ability to enter the WPA settings.
Ideally I'd like to use the XDA to network with the PC and the laptop for file transfers, but if I can't do that, at least I'd want to enable the XDA to access the inernet via the router/hub directly (ie without the other devices being turned on).
Can anyone help with this please - I know from other postings on this site that I'm not the only sufferer, but I haven't see a definitive solution.
Thanks
Charles
Make sure wireless is ENABLED.
Then
START->SETTINGS->CONNECTIONS->NETWORK CARDS
Click the "Wireless" Tab
Add a new connection
General Tab
Network Name: "MyNetwork" (or whatever you want)
Connects to: "The Internet" ("Work" also works for me)
Network Key Tab
Authentification: WPA-PSK
Network Key: "makeUpAKeyHere_thats-long&complex" (I use plenty of ££%!* type characters in mine)
802.1x Tab
Uncheck Use IEEE 802.1x network access control
All done!
Now make sure you have EXACTLY the same Network Key in your router and you should be good to go.
Now to connect to your PC & Laptops you use Resco Explorer 2005 (you'll need to buy it but worth every penny!) to MAP shares from your network.
How to is in This Thread
Worked for me, and I've only had my Mini S (my first PDA ever) a week!
Good luck!
Mark.
I just got my MDA Vario (same as XDA Mini S right?) today and the manual has absolutely nothing about connecting over wi-fi to *anything* let alone my home wi-fi router but I was pleased to find this thread , for a while
START->SETTINGS->CONNECTIONS->NETWORK CARDS
Click to expand...
Click to collapse
doesn't have a "wireless" tab (or any tabs for that matter) but it does offer me a list of adapters to let me modify settings (no option to add one though).
The nearest thing to wi-fi is "SDIO WLAN Wireless Adapter" but I'm pretty sure that would relate to something plugged in to the SDIO slot, and not the built in Wi-Fi hardware. Am I wrong?
I've fumbled around a bit and found one screen which offers a view where I might be able to enter the details you've given here, but the textboxes are all locked/readonly (empty) and I can't write anything in them.
I'm really disappointed so far.
the sdio card is the correct one, the wizard has an sdio wifi card inside I believe.
if you select network card under settings-connections you should be able to add a new connection there, if in doubt search for wifi connection, or post back here for more help, good luck
R
I got a PM about this thread, I thought I'd reply here to as the info could help others....In additon othres may be able to elaborate more on the 802.1 query
Mark,
I had the same problem regarding my mini s which you recently answered. I have a US robotics wireless router (9108) and connect it to my laptop (Thinkpad X31) using WPA-PSK and TKIP - the laptop does not allow me to check 802.1 which I understand is for large companies with a special server.
With my miniS I have found that as soon as I enter authentication WPA-PSK and encyption TKIP, the system automatically ticks 802.1 and I cannot access the page to turn it off.
I have tried communicating with O2 via email but they haven't really helped. What I want to know is whether on your machine with WPA-PSK and TKIP you can turn off 802.1 in which case mine has a fault and I can swap it - otherwise I have to find another smart phone!
Click to expand...
Click to collapse
Hi there, I'm a new user of these phones and understand little of Networking but I'll share my settings with you...
Under "Configure Wireless Network" I have:-
Under "General" Tab I have:-
Network Name: MyNetwork
Connects To: Work
Under "Network Key" Tab I have:-
Authentification: WPA-PSK
Data Encryption: TKIP
{Greyed Out} The key is automatically provided
Network Key:- ABCDE1234&*^ <- Whatever key you make up
{Greyed Out} Key Index: 1
Under "802.1x" Tab I have:-
Ticked use IEEE 802.1x network access control
(I can't change this.)
However on my domestic Netgear DG834G router everything connects just fine, g or b. Have you flashed your phone to the latest O2 firmware?
Mine is
ROM 2.21.4.1 WWE
ROM Date 3/9/06
Radio Version 02.07.10
Protocol Version 413.1.03
ExtROM Version:- 2.21.4.101
I hope this helps,
Mark.
PS. I'll post this in the thread too, it may help others.
hello
i recently purchased the xda mini s and a wifi usb adaptor. i am having trouble accessing the internet. my computer connects to the internet using ethernet to my wall (im not sure where it goes from there). i can connect my phone to a peer to peer wifi network but it does not let use the internet, could anyone help me with the settings please i would greatly appreciate it.
many thanks
harvey
To achieve that you need to set your primary connection as shared in network connections. Once you do that, adhoc mode should be possible without issue.
Please help - similar problem
Hi - I have an XDA Mini S and have connected without issue to the Internet via my router (Wirelessly of course).
The issue I have is that I cannot connect to any network shares on my PC. When I had a CF wireless card in my Ipaq I could do without issue. I have downloaded a ping proggy to XDA and can ping router but cannot ping the PC I have the shares on.
Normally (If I was using a laptop) I would check Workgroup/Domain settings, authentication credentials etc...nothing like this on XDA.
Please help
Wiggz
Quick - fix
I have spent hours messing around with this - however I have had a similar problem with a corporate laptop which wouldn't work.
I changed the router from WPA to WEP and bang - worked straight away. Exactly the same on my XDA Exec so should be same for Mini S (pocket PC 2005).
Hope this helps.
unable to find network wifi
i am using o2 xda mini s to connect my laptop via wifi for transferring files.
it shows the connections status excellent on both devices with ip address 169.254.72.236 on ppc and 169.254.130.63 on laptop.
i used laptop ip address as gateway address on ppc network wifi adaptor setting.
using ping with this ip(169.254.72.236) from laptop it shows success. but can't share folders and transfer files. when i try to open the pah from the file explorer in ppc or laptop it says 'unable to find network that support this ip address' either by entering the name of computer or by entering ip address
help me in using this facility.
MDA Wifi Wont Connect
Hi there-I have an mda vario which I was able to unlock as it was locked to t-mobile and I am with another network. After ages I was able to get a connection to my router or at least it says that it is connected. However I still cant connect to the net via wifi on my mda. I have put in the settings for wpa and wpa-psk, etc have unticked the 802.1x box etc but still no joy. Can anyone help?
Thanks
Morgas
Hi all, new here, thanks for the info posted, was useful but i'm still having problems with the wifi on my xda mini s to my netgear dg834gt router with sky broadband.
The problem seems to be that my xda finally connected to my broadband and router, but now when I try to use internet explorer on my xda I just get
"400 Bad Request"
"Bad filename."
Can anyone help with this? Thanks in advance
Hello,
Im having major issues getting my O2 Xda Minis working on wifi.. Anyone got it working on this.. im havin awful problems configuring it to browse via wifi.. When i go to the comms manager it picks my netgear up but refuses to connect to it.. ive tried with WEP and WPA-PSK encryption but its just not having it.. any ideas?? does it even work with the netgear DG834!!
cheers
faddy
I have mine working with a Netgear 624. The problem may be that you need to upgrade your wireless router ROM for support. EDGE is good enough for me, so I dont use the WiFi too much. it is nice to have. Also if your wireless is a G make sure you have the registry hack for it.
shouldn't have to do anything at all. I turned my mini s on and it immediately picked up my wireless netgear modem router DG834G and I was surfing straight away. Don't advise you to upgrade rom thats a load of crap! sure to end in disaster imo just take a look at the number of probs people have on here when they do that.
Have you set it up for LAN connection?
You should have a shortcut to your conections manager on the bottom taskbar. Check you have the wireless connection activated
select Start, settings, connection, Lan and tell us what your settings are ?
Mine has
SSID netgear
Mode Infrastructure
BSSD 00-09-5b-CE-35-**
TX Rate auto
channel 11
signal good
Hi I have similar issues with WIFI and my netgear.
All is as above but on CH 6 and different BSSID
It seems to connect OK then with strong signal etc but then i try and go to a web page and its slow or doesn't find it.
Then another time its as fast as hell with no problems.
Checked all settings on Netgear and on MDA Vario and all seem to be ok.
Any ideas please
At the moment just connected. surfing via WIFI very fast for 7 pages now come to a dead stop but still have strong connection.
:x
I meant to upgrade the ROM on the Netgear router, not the MDA. At least check your router help section for possible conflicts and issues.
I have been reading this forum and many others all day about the wifi problems people are having but none are like mine so I would like to ask this question, I turn on wifi and it will not find my network or any network around. I have tried to manually put in the ssid and ip address and still it will not connect that way either. I have checked and double checked all my router setting (currently set to open with no wep or anything) I am begining to wonder if the wifi is broken? My second problem I have found it when I change the connection setting to my isp I cannot connect to the internet. Maybe a bad setting, I am not really sure. Any help would be appreciated. Thanks
is your router set to broadcast the ssid? if not then that is the problem. if this option is not enabled then no one can see your router.
as far as connecting via a cell connection, make sure you are using an operator cab. I am sure if you do a simple search you will be able to find a cab that will load all of the proper setting for a cellular internet connection.
who is your provider?
Yes, my router does bradcast the ssid and I have four computers and printers that find it without anyproblems. When i turn on wi-fi the phone doesn't even search for a network the icon shows up but I don't get the arrow that go back on forth to show that it is searching or connecting.
I am also having a problem with my 8525. I do get connected but i cant browse the net. Can someone tell me how to setup a connection from scratch to connect to wifi. Thanks
puremc said:
I am also having a problem with my 8525. I do get connected but i cant browse the net. Can someone tell me how to setup a connection from scratch to connect to wifi. Thanks
Click to expand...
Click to collapse
Search around on the Hermes forum. IE doesn't know to use the WiFi connection when it's available. There's a registry key setting that needs to be changed in order for IE to make use of the WiFi connection rather than going out over your data connection with your carrier.
My XDA orbit initially connects fine to my home wifi BT Broadband connection, but then slows right downand and virtually stops. Is this related to me installing WM6? It seems to have only happened since! I have a laptop that connects easily and doesn't seem to struggle with speed? I am using a BT Broadband Home Hub, which seemed to work properly with WM5, and I can't see any security settings that interfere, and am now at a loss to what the problem is! I realise it is probably one box that is ticked the wrong way! But I can't find it! Any help wouls be gratefully received. I have trawled the forum but cannot find anyone with this specific problem. Jamie
Internet connection
i got the same problem, what i did was goto comm manager, select settings -> wireless LAN ->power mode -> set slider to best performance.
the only thing is it will use up more battery when using the internet.
Thanks will try this!
hi there,
is there any way to tell the pda that....
- it should first turn on wifi
- try to connect to internet
....AND if there's no access point available he can connect to
- connect to Internet via GPRS settings
i found some postings regarding this topic but nothing realy helped.
Regardless which program i use - it always connects via gprs if a internet-connection is essential.
greez Van