Related
Dear Bros,
I have a very serious problem here with my 818pro, which noone may have encounter in this forum, let me tell you in sequence:
1)First, after I downgrade my rom with this file Customize_rom_PDAMobiz_Editon_Upgrade_Rom_for_IPLSPL_2.15.0001_v.1.02.rar, I was unable to power up from USB. I can only power up using the wall mains.
2)After powering up from my wall mains, I upgrade my OS using this file
AKU3.3.07.ASERG .
3)After upgrade and hard reset, I am unable to boot up using both the wall mains and even the USB! My display just went blank, and my two leds (orange and blue) keep blinking on and off.
4)I connect my 818pro using USB to PC but cannot go into the bootloader mode nor boot up into the OS.
5)I connect using my wall mains (but not link to PC) and is able to go into bootloader screen, but still unable to boot up into the OS.
Here, I am unable to perform any upgrade/downgrade of ROM using the mains power as I cannot connect to my PC at all!
6)Worst case, I do not have any ROM backup file on my SDcard, therefore am unable to do anything at all!
7)Lastly, can any of you expert brothers here able to advise me wat to do now, or able to provide me with any SDcard rom backup for the 818pro, as I guess that is the only option out for me now???
Would be deeply grateful to the kind brothers here for helping me out! Sorry for the long story which may be confusing.
Best Regards
valiance said:
Dear Bros,
I have a very serious problem here with my 818pro, which noone may have encounter in this forum, let me tell you in sequence:
1)First, after I downgrade my rom with this file Customize_rom_PDAMobiz_Editon_Upgrade_Rom_for_IPLSPL_2.15.0001_v.1.02.rar, I was unable to power up from USB. I can only power up using the wall mains.
2)After powering up from my wall mains, I upgrade my OS using this file
AKU3.3.07.ASERG .
3)After upgrade and hard reset, I am unable to boot up using both the wall mains and even the USB! My display just went blank, and my two leds (orange and blue) keep blinking on and off.
4)I connect my 818pro using USB to PC but cannot go into the bootloader mode nor boot up into the OS.
5)I connect using my wall mains (but not link to PC) and is able to go into bootloader screen, but still unable to boot up into the OS.
Here, I am unable to perform any upgrade/downgrade of ROM using the mains power as I cannot connect to my PC at all!
6)Worst case, I do not have any ROM backup file on my SDcard, therefore am unable to do anything at all!
7)Lastly, can any of you expert brothers here able to advise me wat to do now, or able to provide me with any SDcard rom backup for the 818pro, as I guess that is the only option out for me now???
Would be deeply grateful to the kind brothers here for helping me out! Sorry for the long story which may be confusing.
Best Regards
Click to expand...
Click to collapse
Hey man,you're not alone.. my 818pro do act like that sucks things as yours...
hoping expert's help ,too.....
solved...just replace a new battery...haha..
really? replace a new battery will help? why is that so??? my battery is still good , and the only thing i did to **** up the pda is just reflashing the rom to a wrong one.
what happen when u replace a new battery? can share?
get the battery out.
cut your charger cable open
the inner cable, the one inside of the inner white one connects to pin 1 from the physical top.
the outer one of the charger cable connects to the fifth pin from the physical top
no you go into bootloader and connect the usb cable, flash over another rom and try if it works... GET OUT THE BATTERY BEFORE YOU CONNECT THE PINS mine got damaged because of that
hey thanks! i've successfully unbricked my 818pro and flashed it with os 1.013, a very early version, and only that seems to work! I had tried flashing to aku3.3 clean rom from pdamoviz but it stuck at the splash screen after successful flashing.
another funny thing, although i unbricked my 818pro, i can still only soft reset it thru my charger instead of usb. If i soft reset while on usb power, the device will just shut off and show blue and orange flashing leds. Do u have a workaround for this problem?
valiance said:
hey thanks! i've successfully unbricked my 818pro and flashed it with os 1.013, a very early version, and only that seems to work! I had tried flashing to aku3.3 clean rom from pdamoviz but it stuck at the splash screen after successful flashing.
Click to expand...
Click to collapse
hI,How did you flash the rom? You could not go into bootloader mode, nor connect through usb. Please give the procedure used, because I have the same problem. Thanks.
no and there are still a lot of problems for me... I bricked 2 batterys already for example but I'm working on it ... but its a little bit different as I flashed a Wizard bootloader and I have no idea what happened with your phone^^ but something else... I know the problem though, often my phone doesn't even bootup after soft reset if its connected to the charger...
cr0ssy said:
get the battery out.
cut your charger cable open
the inner cable, the one inside of the inner white one connects to pin 1 from the physical top.
the outer one of the charger cable connects to the fifth pin from the physical top
no you go into bootloader and connect the usb cable, flash over another rom and try if it works... GET OUT THE BATTERY BEFORE YOU CONNECT THE PINS mine got damaged because of that
Click to expand...
Click to collapse
|I tried the same with my G3 JAMin and it worked. I have a G4 JAMi wth the same problem. I tried the above solution but di'd not succeed. Any ideas?
please need help!
i try to downgrad my "prophet" and now i have (boot loader mode) only with AC adaptator and i see this: "
"get the battery out.
cut your charger cable open
the inner cable, the one inside of the inner white one connects to pin 1 from the physical top.
the outer one of the charger cable connects to the fifth pin from the physical top
no you go into bootloader and connect the usb cable, flash over another rom and try if it works... GET OUT THE BATTERY BEFORE YOU CONNECT THE PINS mine got damaged because of that"
but my english is not well, can you try to explend me in french or by a graphic please?
As in my earlier post I had mentioned that my atom is not charging in on mode. It only charges when i remove the battery and again put it in and put it for charging. If i turn it on then the charging stops. Same happens when i put the USB cable of my computer.
Secondly the device never syncs nor does the computer recognise any device when i connect via usb (as above it also does not charge).
I tried a lot of ways via buetooth but still it does not sync at all.
Please somebody help.
I recommend hard reset your Atom if that does'nt work then reflash rom
homer285 said:
I recommend hard reset your Atom if that does'nt work then reflash rom
Click to expand...
Click to collapse
But it doesn't sync with the pc then how do i reflash it ?
first backup everything to memcard, you should be able to enter bootloader to flash rom.
homer285 said:
first backup everything to memcard, you should be able to enter bootloader to flash rom.
Click to expand...
Click to collapse
Can you help with this info that whether i can update to the latest ROM by downloading the same from my device itself and installing in on the device (without the use of any computer).
Thank you
swordfish99 said:
As in my earlier post I had mentioned that my atom is not charging in on mode. It only charges when i remove the battery and again put it in and put it for charging. If i turn it on then the charging stops. Same happens when i put the USB cable of my computer.
Secondly the device never syncs nor does the computer recognise any device when i connect via usb (as above it also does not charge).
I tried a lot of ways via buetooth but still it does not sync at all.
Please somebody help.
Click to expand...
Click to collapse
I had a similar problem, it turned out to be a mother board fault and i sent my Atom back to O2 for a warranty repair. Try nipping up the USB mini plug so that it is a tight fit when pushed in to the Atom, that worked for me for a while.
Dear users,
My Wizard won't start.
Information:
- Stuck at bootloader
- Hard reset won't work
- Updating (at windows xp) won't work, as it stops at 99% (tried 3 roms, even the original from t-mobile). Giving a communication error and my wizard keeps rebooting.
When did this start? After using Button_rom 1.5, it stopped at 99% =)
Anyone that can help me?
Thank you
ErnstJanF said:
Dear users,
My Wizard won't start.
Information:
- Stuck at bootloader
- Hard reset won't work
- Updating (at windows xp) won't work, as it stops at 99% (tried 3 roms, even the original from t-mobile). Giving a communication error and my wizard keeps rebooting.
When did this start? After using Button_rom 1.5, it stopped at 99% =)
Anyone that can help me?
Thank you
Click to expand...
Click to collapse
Mostly,Communication errors are due to weak or drained battery,get it fully charged.
Secondly,get the phone in Bootloaders (RGB) screen and hook it up with pc via usb cable and watch small usb appear at the bottom of the Bootloader,if its there,then reflash the official rom,if its not there,then its a connectivity problem.Either the usb cable is faulty or the mini usb port of the phone.You can even try by changing and plugging the usb cable in another pc usb port.
BTW, remove any sdcard or minisd inserted in the phone before flashing.
zabardast_1 said:
Mostly,Communication errors are due to weak or drained battery,get it fully charged.
Secondly,get the phone in Bootloaders (RGB) screen and hook it up with pc via usb cable and watch small usb appear at the bottom of the Bootloader,if its there,then reflash the official rom,if its not there,then its a connectivity problem.Either the usb cable is faulty or the mini usb port of the phone.You can try be changing and plugging the usb cable in another pc usb port.
Click to expand...
Click to collapse
Thank you,
My phone had problems recently. It won't start without power cable. And it suddenly shutdowns as I am playing games or listening to music.
It allways hangs at 99%, and with the original ROM it hangs at 80% and also gives the error. It just reboots =(
Ive powered the phone up the all night, after that I tried to flash a rom, but it gave me the exact error at 99%.
Anyone that can help me?
ErnstJanF said:
Thank you,
My phone had problems recently. It won't start without power cable. And it suddenly shutdowns as I am playing games or listening to music.
It allways hangs at 99%, and with the original ROM it hangs at 80% and also gives the error. It just reboots =(
Ive powered the phone up the all night, after that I tried to flash a rom, but it gave me the exact error at 99%.
Anyone that can help me?
Click to expand...
Click to collapse
smell like a bad battery.
revertive said:
smell like a bad battery.
Click to expand...
Click to collapse
New battery is coming in tomorrow, I will test it =)
Hi all,
I'm experiencing the above problem. It started last week when I tried to reflash the firmware to a third party firmware. The unit could power up as normal, wifi, bluetooth all working fine but not the USB. I've tried installing a utility which switches the mode from RNDIS to USB but it still failed .. hard resetting the device does not help either. Is there a way that I could revive the USB connection? I couldn't sync my contact etc at the moment with my PC.
BTW, currently I'm on Onyx Jr. 4.1.2. I could not update to any firmware due to this and I don't have microSD to SD converter which I could use to copy the firmware to the microSD.
TA.
Disconnect sync cable. Reconnect to different usb port on computer. Right click ActiveSync in taskbar. Click connections. Make sure "Allow USB connections" is checked. If above fails, uninstall usb adapter in device manager, reboot computer. It'll reinstall with stock drivers after reboot.
It may happen due to faulty USB cable. Try and use another cable and on some other computer and check
I've tried all that I could think off including removing activesync and reinstalling it back. I've few miniUSB lying around and I've tested many of them but my notebook just did not want to recognized the htc touch. I've tried using those cables with my wife's tytnII and they worked .. could it be the hardware problem inside htc touch itself?
Tried with a new USB cable found in my newly bought GPS and if I reseat the cable properly, my notebook could recognised the htc touch. So I guess a new cable does help.. thanks all for the help.
Dear friends,
Recently I damaged by USB port. So, I sent my phone for repairing at Samsung Servicing Centre where they replaced my USB port. After they replaced my USB port, my phone is not detected by PC anymore. Nothing happens at all if I connect my phone to a PC. There is no notification at all. My phone is only charging. I tried pulling up and down the tongue - like structure inside my USB port but it's of no use at all. I am at a delimma. Please help.
thadoukuki said:
Dear friends,
Recently I damaged by USB port. So, I sent my phone for repairing at Samsung Servicing Centre where they replaced my USB port. After they replaced my USB port, my phone is not detected by PC anymore. Nothing happens at all if I connect my phone to a PC. There is no notification at all. My phone is only charging. I tried pulling up and down the tongue - like structure inside my USB port but it's of no use at all. I am at a delimma. Please help.
Click to expand...
Click to collapse
repairs are usually covered by warranty upon the same issue incase they were unable to fix it.
take it back to them and demand to resolve the issue,
you paid good money for the repair and therefore should be entitled to it
maybe u haven't installed samsung usb drivers
the same problem with mine., i just changed my usb chord after that i cannot connect to usb mass storage anymore even i installed usb driver still can't access storage
rio. said:
the same problem with mine., i just changed my usb chord after that i cannot connect to usb mass storage anymore even i installed usb driver still can't access storage
Click to expand...
Click to collapse
here's what i do when that happens:
(1) re-install drivers
(2) reboot pc and also cp
(3) connect chord and wait till the pc auto installs the drivers
(4) press "ok" connect phone storage
ps: also try to straighten the chord and flex it a bit. hehe
Reynaldi said:
maybe u haven't installed samsung usb drivers
Click to expand...
Click to collapse
I have installed Samsung Galaxy Y USB Drivers on my PC.
Sent from my GT-S5360 using xda premium
sheen_bebe said:
here's what i do when that happens:
(1) re-install drivers
(2) reboot pc and also cp
(3) connect chord and wait till the pc auto installs the drivers
(4) press "ok" connect phone storage
ps: also try to straighten the chord and flex it a bit. hehe
Click to expand...
Click to collapse
Sorry bro, it's not working.
Sent from my GT-S5360 using xda premium
deathnotice01 said:
repairs are usually covered by warranty upon the same issue incase they were unable to fix it.
take it back to them and demand to resolve the issue,
you paid good money for the repair and therefore should be entitled to it
Click to expand...
Click to collapse
I didn't trust them anymore bro. They know little about software. They flatly told me that my USB was blocked.
Sent from my GT-S5360 using xda premium
Deleted
Deleted
The main problem is that it is not even detected by my PC as connected. There is no notification of the phone being connected at all both in PC and phone. Can this be due to the USB cable that I am using? Or is the new USB port incompatible with my phone? Will reflashing the Rom solve the problem? The Samsung Servicing Centre fellows have no solution at all. They simply said that it is a software problem because I am on a custom Rom and that my USB is blocked. I don't think USB port can get blocked because of flashing a custom Rom because it was working fine before the repair. Please please please help me.
Sent from my GT-S5360 using xda premium
thadoukuki said:
The main problem is that it is not even detected by my PC as connected. There is no notification of the phone being connected at all both in PC and phone. Can this be due to the USB cable that I am using? Or is the new USB port incompatible with my phone? Will reflashing the Rom solve the problem? The Samsung Servicing Centre fellows have no solution at all. They simply said that it is a software problem because I am on a custom Rom and that my USB is blocked. I don't think USB port can get blocked because of flashing a custom Rom because it was working fine before the repair. Please please please help me.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
this also happens to me sometimes and ive already given you my own solution to this
if your phone is charging when you connect to the pc..
it means the chord is maybe working..
try to tighten the usb chord connector to the usb socket of your pc..
are you sure you are using the right drivers?? kindly check or use the kies cd
be patient and wait for the phone drivers to be automatically installed by the pc when you connect the phone fr the 1st time..
try turning off you anti-virus.. (not related but....)
thadoukuki said:
The main problem is that it is not even detected by my PC as connected. There is no notification of the phone being connected at all both in PC and phone. Can this be due to the USB cable that I am using?
Click to expand...
Click to collapse
There are charge only cables that do not data connect. If it is trickle charging the phone that is the problem. But you say there is no indication of a connection; sorry I just kinda jumped in at random. Your post popped up in the new posts list.
Sent from my SubGenius™ LG P925 with XBSA 3D ICS ROM and downloadable Slack™
Are ur usb ports properly functioning ? ie pendrive or other are working properly ?
also is your usb cable working ? if possible you can try with your friends usb cable which can go in your phones port .
if nothing works flash stock rom again
Sent from my GT-S5670 using xda premium
sheen_bebe said:
this also happens to me sometimes and ive already given you my own solution to this
if your phone is charging when you connect to the pc..
it means the chord is maybe working..
try to tighten the usb chord connector to the usb socket of your pc..
are you sure you are using the right drivers?? kindly check or use the kies cd
be patient and wait for the phone drivers to be automatically installed by the pc when you connect the phone fr the 1st time..
try turning off you anti-virus.. (not related but....)
Click to expand...
Click to collapse
I am using the latest Samsung USB drivers for mobile phones. My phone is only charging. No notification nor sound of connection to PC.
Sent from my GT-S5360 using xda premium
soham jambhekar said:
Are ur usb ports properly functioning ? ie pendrive or other are working properly ?
also is your usb cable working ? if possible you can try with your friends usb cable which can go in your phones port .
if nothing works flash stock rom again
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Pen drives are working properly. I don't think its the cable because it is the original USB cable provided with the phone. I have tried with other USB cables but same result. Will flashing stock Rom really solve the problem? I can't flash stock Rom because I can't connect to Odin boy longer.
Sent from my GT-S5360 using xda premium
drastic00 said:
There are charge only cables that do not data connect. If it is trickle charging the phone that is the problem. But you say there is no indication of a connection; sorry I just kinda jumped in at random. Your post popped up in the new posts list.
Sent from my SubGenius™ LG P925 with XBSA 3D ICS ROM and downloadable Slack™
Click to expand...
Click to collapse
I am using the USB cable supplied with the phone. It was working flawlessly before.
Sent from my GT-S5360 using xda premium
if its charging and pendrive is working then we can eliminate hardware issues
now for software its either pc or mobile
try connecting with another pc . it it doesn't work then its not pc problem
all I can say is flash stock rom then
Sent from my GT-S5670 using xda premium
soham jambhekar said:
if its charging and pendrive is working then we can eliminate hardware issues
now for software its either pc or mobile
try connecting with another pc . it it doesn't work then its not pc problem
all I can say is flash stock rom then
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
How will I flash stock Rom when USB is not working? Or is there a flashable zip of Stock Rom available?
Sent from my GT-S5360 using xda premium