So I have a JAM with the original ROM on it - no BT software on it. Theoretically, it should see my Jabra BT250, but it does not see it. However, my JAM does see my BT-enabled laptop, so I know the BT is functioanl in my JAM.
Does anyone know if there is a particular upgrade or software package that will help me in linking my Jabra to my JAM? I'm not quite sure why it's not even identifying the Jabra as a discoverable BT device. Please help.
You first gotta make sure that your headset is switched to the pairing-mode so that it can be seen by other devices. Dont know how it works with the Jabra headset, must be standing in the manual.
cu
To put the Jabra into pairing mode hold down the vol up switch and power switch untill you see a solid blue light.
You should then make the Jam discoverable, go into devices then New.
It should pick it up.
I have a 250 boded to my mini...slightly different but I'm getting +10 meters with it
Related
I have an i-Mate (v1.52.00WWE) and two (2) BlueTooth headset devices:
Parrot CK v3.11 - Car Kit
M3000 by Plantronics - Ear Piece
Both are bonded, but I guess I can only ever set one as my default at any time (obviously you can't have the call ringing in two places at once - but that would solve the problem!).
Is there a way of switching between them simply?, or having them 'auto select' the correct default profile?, or having them both active at once? I currently have to rediscover them to switch.
Would this be made easier if the i-Mate had both Headset and Handsfree (?) profiles? Is this available?
Hope its not such a silly question :lol:
Thanks in advance,
Ian
I have BT carkit, and BT handsfree,
and I have the same problem.
With my Nokia 6600, it works great,
there's no "default profile",
both works.
Even more confused now
Thanks for the reply - I'm even more confused.
What I ment to say that with the 6600 it works great, :lol:
unlink the i-mate pocket pc. :roll:
I have just purchased the xdaII and found this problem too...
Have you found out any more info on this?
The only thing i can do at the moment is rename the bluetooth device and it then prompts me to set as default...
Ta
Christian
Thanks for the tip
No I have not found out more.
I tried the widcomm drivers, but found headset was all screwed up.
Thanks for the tip on rename. I have been deleting and recreating.
Now we only need a application on the Today that can rename the two BT devices and back.
Maybey a reg.key-file we can 'click' ??
One more of the shortcommings of XDAII in anything related to the BT sofware.
I read about a new ROM version comming out soon, that is supposed to fix the those BT problems, Has anyone more info on that?
:?:
IanF said:
I have an i-Mate (v1.52.00WWE) and two (2) BlueTooth headset devices:
Parrot CK v3.11 - Car Kit
M3000 by Plantronics - Ear Piece
Both are bonded, but I guess I can only ever set one as my default at any time (obviously you can't have the call ringing in two places at once - but that would solve the problem!).
Is there a way of switching between them simply?, or having them 'auto select' the correct default profile?, or having them both active at once? I currently have to rediscover them to switch.
Would this be made easier if the i-Mate had both Headset and Handsfree (?) profiles? Is this available?
Hope its not such a silly question :lol:
Thanks in advance,
Ian
Click to expand...
Click to collapse
I just rx'd my Plantronics M3000 headset. It bonds to my XDA2 but I cannot for the life of me, answer or make a call with the headset.
1. When searching for a Bluetooth device, it finds the M3000 by Plantronics
2. I highlight it & tap next
3. I enter the bond code
4. I give it a name & tap finish.
Then it asks me, "This Bluetooth device supports headset profile, would you like to set it as your bluetooth headset?"
I answered Yes but I can't do the calling. Should this be answered No?
I originate a call on the XDA2, when it connects, I press and release the headset TALK button, hear a tone in the earpiece but the call never switches to the headset.
I have the green 3 sec blinking green light so unit is on. XDA2 has the blue indicator blinking.
Any feedback would be helpful since you do have the Plantronics,
Regards
Craig
Hi cshields1!
I don't have a Plantronics, but two SE HBH 30 and HBH 35 that work "somehow" with my XDAII.
First I would reccomend you to upgrade your ROM, since the Bluetooth radio stack of version 1.06.01 seem to have improved a bit over the previous ones (just in case you haven't yet)
Second, no matter what you do, actually you would NOT be able to initiate a call from your headset, you just can answer an incoming call and end a call, that is with the poor BT support in the XDAII.
Third, I'm not sure what you do, but please check:
- once your headset is bonded, turn your BT setting back to ON (BT icon on the bottom right of the Today screen)
- be sure your phone is NOT in flight mode
- Check that your "BT headset mode" in Today Screen is enabled
Tell me if this works.
:wink:
Hey guys. I have an XDA II and the Motorola Bluetooth headset. I gave up trying to use the headset before the updated XDA II ROM as it was very temperamental to say the least. Now I have updated the ROM its much better but I still have problems. If I am dialling out and put the headset on first then its fine, transfers to the headset etc. If I am wearing the headset and then take a call its fine, transfers to headset etc. But if I am not wearing the headset, say it’s in its case and the arm is closed then I get a call, I open the arm and stick the headset on and answer a call and nothing. Wont transfer to headset and I need to use the phone. Not good when driving! Is this still a XDA II problem? Have I set it up wrong or is the headset not working right? Bascially I need to have the arm open on the headset at all times for it to work like it should (like it did on my T68i) and its very annoying? Any ideas?
This is the headset http://www.motorola.com/mdirect/software/ss_html_docs/bluetooth/bluetooth_headset_info.pdf
Thanks in advance
Have you installed bluetooth tools? Unbond your headset then rebond after installing bluetooth tools.
What the best place to get the bluetooth tools from? Sorry if this has already been asked. And are they free??
Thanks
Yeah I did try bluetooth tools but it did not seem to make any difference maybe its just my headset, it was like one of the first Bluetooth headsets out :? I dunno...
You can get Bluetooth tools from...http://www.angeltowns.com/town/bluetooth/
And it seems to be free
Thanks for that.
However, I could not find the settings button, Just a display on the screen. What are the 1 & 2 buttons for??
:?
Yeah the only changes you see are when adding new devices like headsets etc as far as I know. I thought the same as you, went through all the options looking for it hehe. Those two things on the screen are something to do with selecting different settings for bluetooth to conserve battery like always on or auto off. I am not too sure as I removed it when it did not fix my problem!
Yeah, I removed it too. It caused me all sorts of problems with connecting my bluetooth jabra bt200!
Does anyone tried to connect the XDAII with the new HP BT stereo heaphones with XDAII?
I have this HP device but can not install it.
Bummer..
Widcomm BT Stack on XDAII...
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Interesting. Will check it out and reply.
This is my experience using a HP bluetooth stereo headphone bonded with an O2 xdaII. I use Wincom 1.5 Build 2000 from "dtktvu". So far the setup has worked very well. After having used the setup for three weeks, my impression is as follows:
1. Connection with headset is very stable
2. Stereo sound is clear, quality is quite superb really.
3. So far this setup works only for music, it does not work together with bluetooth headsets (if you happen to have one). This means that you can not use your headset at all while using the headphone.
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
5. You have to use Windows Media Player as the player for point 4 to happen. I am not sure how the setup will react to incoming calls with other players such as Winamp, GS Player etc..
6. Battery life is quite good. I get about 6-7 hours of playtime from the headphone.
Now, if only someone will update this Wincom Driver further so that it can work together with bluetooth headsets, then we will have the best of both worlds... Maybe donations from potential users to provide incentive to some expert out there.
Widcomm BT Stack - Get it here
http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=50
You may need this key as well
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Transports\BuiltIn\3]
"driver"=""
Thank you to dtktvu
Widcom on XDA II without Windows Mobile SE?
I would also like to use the HP bluetooth headset. I have a XDA II (not IIs). Will the Widdcom stack install on this? I am currently not running Windows Mobile SE.
Many thanks.
keys
where do we copy and paste those keys? do you think this could work with the Magician?
khanh_xda said:
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
Click to expand...
Click to collapse
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.
[/quote]
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.[/quote]
Thanks for the pointer, didn't work though.
Would welcome any other ideas.
Will this work on XdA2JoJo.v3.2zS version that has broadcom 3900? I'm planning in getting one.
Need advise...
Thanks
HP BT stereo headphones with XDAIIi
Hi,
I've read the thread but cannot see any indication of someone using an XDA IIi and the HP BT stereo headphones. Anyone know anything about this particular combination? So far I know the software that comes with the HP BT stereo headphones will not install on the XDA. And without the BT high quality audio profile installed I cannot get past pairing the devices. Any ideas?
Thanks,
R
Re: HP BT stereo headphones with XDAIIi
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
someone tried hp bluetooth headset with wm5?
Re: Widcomm BT Stack on XDAII...
dtktvu said:
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Click to expand...
Click to collapse
Other than the hp headset, does it work on i-tech clip S or i-tech clip S35 bluetooth stereo headset as well.
Re: HP BT stereo headphones with XDAIIi
hahol said:
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
Click to expand...
Click to collapse
install where ? :?:
has anybody done it this way !
Bstard said:
someone tried hp bluetooth headset with wm5?
Click to expand...
Click to collapse
anyone an idea? i want a bt headset (hp) but not willing 2 go back 2 wm2003
headsets
I have three stereo bluetooth headsets here for testing purposes:
- Logitech Wireless Bluetooth MP3 Headphones for PC (aka Hewlett Packard FA303 or Toshiba PA1831)
- Motorola HT820
- iTech Blueband
I have tested them on my Qtek 9090 (BlueAngel) and they all worked fine. There is not much diffrence in audi quality, the diffrence is more in the comfort of wearing them. Most of my collegues liked the Motorola the most but I prefer the Logitech. The iTech feels a little bit cheap...
More experience and info about stereo bluetooth headset is posted on http://www.robertwebbe.nl/A2DP.html.
Has anyone connected headphones with XDAII? i can't at all( after installing broadcom 1.5 phone cannot call correctly, i can't hear anything(
I have a iMate PDA2k EVDO & iTech BlueBAND headpones. I was able to use use the BT headset to use the phone however as the Broadcom 3500 stack didn't come with a Audio profile I couldn't hear music (mp3s via WM10). I installed Broadcom 3900 stack - can now hear stereo music but the volume on the phone is so low I can bearly hear it. Otherwise my PDA is stock standard Windows 2003 WWE etc. Any suggests? As I am a new owner, I would appreciate the help. Cheers,
Hi
I have recently received a Blue Angel from our mobile provider and it comes with the Bradcom stack 1.0.0.3900.
Does it have A2DP integrated, or I need to install anything to make it compatible? I am interested on a Motorola HT820 headset and i want to make sure it will be compatible...
Broadcom Bluetooth stack for Benq P50
Hi,
Has anyone tried installing the Broadcom Bluetooth stack onto a Benq P50 Window2003 2nd edition? Thanks.
Cheers!
hi guys, i bought a new o2 xda2 from my friend. he also had a logitech hs02-v bluetooth headset working with it. i took the headset to try but it didnt communicate while the xda2 had paired it.
i tried other headsets but no one worked.
xda2 finds the headset, make a pairing(i enter the passkey 0000) and then nothing....
so please help me
Connect the headset to the PC using the utility provided and change the paskey to any other(Like 1234) and then try pairing it...
Most probably it should work fine...
---------------
Sanjeev K Purohit
Did you turn your "Bluetooth Profile ON"?
After you paired your bluetooth-device.
You need to turn bluetooth on (by click at bottom right at Bluetooth icon).
and To turn bluetooth headset on, You need to click at Bluetooth Profile to make it on.
The Bluetooth Profile is stay on your Today screen.
:?: :shock: I have exactly same problem, using latest official rom and stuff - no bt tools or something.
Update: Works with BTTools :idea: 8)
Update of update: It seems that headset needs pairing each time after you turn it off and on. :shock:
I just got the logitech one this morning, it works ok with the MS stack, but I prefer using the widcom stack.
When I use the widcom stack the icon saying that I have the bluetooth headset is there, but the calls dont get channeled to it.
Is it possible to use the widcom stack for headsets? Or is it simply an incompatability?
ok i simply hard reset the device and the profiler brought bluetooth profile. now its ok.
So I have been reading many many posts about bluetooth static while on a call and the phone being very close to the headset. I have similar problems with my PDA2k.
I also carry a blackberry 7105t and the bluetooth is flawless and very clear.
With the new release of Qtek AKU2 ROM 1.30.77 1.30.176 1.09.00 WWE
Which Radio version is best for the USA and T-Mobile?
Does the Radio have "anything" to do with the Bluetooth clarity (static in the earpiece between the xda and the bt500)?
I am on the phone ALL DAY and can not hold any phone to my head so I need my bt500 to work well with whatever i buy and so this is the last thing i need to clear up before i make the purchase. Any help is appreciated. FISH
Anyone?
Seriously no one uses the Jabra bt500 - it is an AWESOME headset. You could play any sport with it in and it wont fall out and the clarity is perfect - WITH THE RIGHT PHONE.
Please someone chime in here........
FISH
The BT 500 is one of the best headsets out there, if you are getting static try re-pairing your headset.
Jabra official support will tell you that the phone should be on the same side as the headset.
If it's too bad I would try to have Jabra swap it out under warranty.
How can i repair?¿?
Thanks
You can't repair you can try to delete the partnership and then pair it again.
thanks, but it´s solved the stactic ?¿?
Regards