i'm looking for detailed instructions on how to remove and re-assemble the LCD panel in an imate JasJar..
my unit was dropped and it has cracked the LCD panel...
i have ordered a replacement from the US to ship to AUS and i would like some detailed instructions before i start pulling things apart...
if this has been performed by someone else it will make my job easier...
Look on the ftp site here for the full service manual for the universal.
yes... i conducted a search on the site and found everything i need...
it's always a good idea to do a search... or so i found out.
hi. i tried searching a couple forums but haven't found anything regarding a place to buy 8125 parts or a manual to take it apart. i do have the proper t5 driver and just can't seem to get it open. thanks.
Would not recommend disassembly unless you are very experienced
see this thread http://forum.xda-developers.com/viewtopic.php?t=43381
and good pictures here http://forum.xda-developers.com/viewtopic.php?t=43748
thanks a bunch!
Theorist and others who need to do the same, here is the progress I made. The back cover for the 8125/Wiza100 is different than the others. Instead of prying on the side (per the service manual), I pryed at the edges of the keyboard area. The PCB is held in by two clips and a phillips head screw. Everything else should be along the lines of the service manual. Also, if you are just replacing the LCD/touchscreen, you can skip the steps about removing the vibrator, camera, and taking apart the keyboard.
as title suggests.a guide with pictures so i can attempt a charge/sync replacement
cheers
http://forum.xda-developers.com/viewtopic.php?t=8525&highlight=audio
http://forum.xda-developers.com/viewtopic.php?t=61048&highlight=audio
all the images dont work so thats useless..
ah 2nd wrks cheers
Hi!
My uni's hinge got really loose and shaky and i was bloody frustrated all these days. Though i'd taken it apart so many times and tightened the hinge, it didnt make a difference....until today
I opened it up, pulled the side clip-ons out (the two pieces with the status LEDs for btooth & radio) and did this -
The bluetooth led piece goes around a metal pipe (the hinge rod) which usually gets loose and starts to slip. I wrapped a layer of cello-tape onto this hinge rod and slid the bluetooth led piece back on to the hinge rod. This time because of the cello-tape the piece goes f***in firm onto the hinge rod!!!
On the opposite side, i stuffed some toilet paper (!!!) into the piece to make it stiff as there isnt too much of the hinge rod on the other end (for the Radio led piece).
Reassembled the damn thing back, and now it feels like brand NEW!!!! Man, no clicking sounds, no rattling or shakes, no i'm-gonna-fall-apart-any-minute feeling!!!
After doing this, i feel like hanging on to my uni for some more time (a day ago i was so frustrated that i wanted to get rid of it!!)
Cheers!
San
If anybody wants pictures of how to do it, i can make an illustration....let me know if anything is unclear and u need help!
cheerio!
step by step instructions backed by pictures would be great! mine's starting to wobble to... this would be a great help!
PLEASE DO!!!!
PLEASE!!!!
Pretty PLEASE
COME ON....
where are the instructions and pictures? cant wait... hehe!
Hey!
I'll do it in te next couple days.
However, I think if you search for the HTC Universal's service manual, it has better instructions. You need to do the following -
1. Remove battery, sim, and remove 4 screws which are under the battery
2. Remove stylus, and start pulling the back side cover apart.
3. Disconnect antenna holder (the white plastic surrounding the camera (on the insides of the device)
4. Remove screws holding the motherboard, remove connectors coming from display unit and keyboard
5. Pull off the motherboard.
6. Take off the keyboard by removing all screws holding it.
7. Now, the two pieces (i talked of in my first post come off along with the display unit. Do what I told you in the first post and reassemble in the reverse order
8. It should be all fixed!
Again, for these steps download the service manual for step by step instructions with pictures. Also, all you need to take it apart is one screw driver with two bits! Its a philips screwdriver...get the specs from the service manual again!
Cheers!
San
Would be nice to get some pics of your "mod".
Any ideas on when you have time to put that up?
Thanks.
ey! still awaiting you're mod pics... hope you can put it up!
i realize this is old, but i'd like to see pics of this. my 9000 is a bit loose feeling.
yes please, post your pics, always is good to have aonther point of view of how to make it
yes please,pics please dreamtheater sir....
plz sir,i very urgently need your meyhod details for tightning the jasjar hinge as mine is getting too loose and shaky just like yours,u had said in your thread that u can provide pics as welll,plz iam constantly waiting for ur reply in that thread,,,bbut theres no update...
dear sirji,
pls update on the pict. need it urgently
It would be nice to saw what you made...
pl plzzzzzzzzzz plzzzzzzzzzzzzzzzzz sir i beg u plz upload pics,iam dying
Hi... can you plz post the pics of your modification. thanks in advance.
id like to disassemble the screen part of the phone. im particularly interested in the leds underneath. i see 3 screws on the back when the phone is open but im worried about breaking something. id just like to see a pic or two of the actual disassembly. thanks.
There is a pdf version of the service manual around here somewhere. That has a pretty detailed step-by-step guide on how to disassemble the G1.
thanks.