After Flash ROM by use SD-Card. Although CheckSUM is OK!
I reset and nothing work. I can't do anything, enter bootloader, hard-reset, soft-reset, connect with PC, nothing.
Help me plz.
I really need it for my job.....!
My device is O2-xdaI
Thank
Which ROM did you use ?
Where did you get it from ?
I used xdatool to build bootloader and winCE to SD-Card.
It's xda-developers Special Edition.
I don't know which version.
I used xdatool to build bootloader and winCE to SD-Card.
It's xda-developers Special Edition.
I don't know which version.
Kavin,
I'm not the most experience guy on this forum for this. I'll not be able to diagnose right away what you may have done: What has happened.
Let me summarise what you said with the missing information ?: )
You had a working XDA1 using the following:
- Bootloader version: :?:
- Rom version : :?:
You tried an upgrade getting the pre-cooked Special Edition ROM based on PPC 2002. You :
- Dowladed the ROM in the format :?: (exe, Nbf, Nb1)
- copied it on an SD card using XDATools
- Flashed it to your XDA using XDA Bootloader mode version :?:
and now your XDA seems to be dead.
After your clarified the missing point, I have one more question :
- Can you enter into bootloader mode at present ?
Yearh........! exactly!
Thank Tanguy so much.
Anh previous bootloader is v5.15. Maybe ROM version is v3.12.00.
Now I can't enter booloader.
I tried to tap and hold Power Button then press Reset. So, nothing happen.
I can't lost my xda. I't very very Important device for my job.
Kevin,
Again, I'm not the most expert on this.
What looks surprising to me is that you have lost access to Boot Loader after a ROM upgrade. I'm confident you'll bring your XDA back to work as I never seen post like this which did not get resolved.
My advices are:
- Search this forum on this topic (dead boot loader) to understand why. I'm confident you will be able to correct this situation.
As a start point, try this http://forum.xda-developers.com/viewtopic.php?t=3274&highlight= or http://forum.xda-developers.com/viewtopic.php?t=12991&highlight= http://forum.xda-developers.com/viewtopic.php?t=12925&highlight=
Possible next step, in the XDATools there is an option to Fix Boot loader. I have never used it. It may solve your case. If that were for me, I'd spend what ever time is necessary to understand what has gone wrong before trying various tools to fix it.
Tanguy
i don't mean to be be a jackass, but if you unscrew your stylus, and stick the little plastic end into the little hole next to the headset jack, it should turn on. most people don't know that the device needs this to turn on after a romflash. it's called a hard reset, btw. hope this helped!
were can i download the xda-tool?
at first sorry, but my english is´nt the best.
i have a littel Problem:
DOS-box from C:\WINDOWS\system32\cmd.exe
print
ERROR: GetDeviceData - Eine vorhandene Verbindung wurde vom Remoehost geschlossen.
error getting devicedata
PROGRAMME A v1.09
break down
print
ERROR 011: EXECUTE REMOTE COMUNICATION PROGRAM ERROR
Cannot execute the remote communication program.
Please make sure that the USB/Serial cable is properly connected.
In the search i found that i need for this Problem the SD-card methode.
for this way i need the xda-tool?
but even link doesnt work.
Can anybody help?
Thanks
Re: were can i download the xda-tool?
witzvolk said:
at first sorry, but my english is´nt the best.
i have a littel Problem:
DOS-box from C:\WINDOWS\system32\cmd.exe
print
ERROR: GetDeviceData - Eine vorhandene Verbindung wurde vom Remoehost geschlossen.
error getting devicedata
PROGRAMME A v1.09
break down
print
ERROR 011: EXECUTE REMOTE COMUNICATION PROGRAM ERROR
Cannot execute the remote communication program.
Please make sure that the USB/Serial cable is properly connected.
In the search i found that i need for this Problem the SD-card methode.
for this way i need the xda-tool?
but even link doesnt work.
Can anybody help?
Thanks
Click to expand...
Click to collapse
Do you have an T-mobile ROM? If yes, you can only flash ROM via SD-card if you have a T-mobile ROM.
Download XDA-tool
I know, that i have to flashing ROM via SD-card, but i think i need for this the
XDA-tool!
And i can not find a correkt link for download this tool.
And i also dont know exactly how to use this.
Sory but i am a greenhorn :wink:
all will be o.K. :
i have found this link:
http://www.xs4all.nl/~itsme/projects/xda/OsImageTool.html
and with this tool i have flashed my rom.
greatings
VW
i installed the file in my xdaII
but then when i press unlock it won't function
itLL say
debug
ERROR:
FL_IOCTL_BDTL_HW_PROTECTION - A device attached to the system is not functioning.
idea>????
feedback please! need this thing working badly! tnx!
Hello All,
i've Motorola i920 Smartphone bases mobile , i try to install and run Cert.cab, Cert_SPCB.cab , EnableRapi.cab and any other application i try to install but every time im getting error that appilcation not digitally signed even i used Remote Register Editor (http://www.breaksoft.com/Blog/Utilities/2005/1/Mobile_Registry_Editor.aspx) but still no solution, i can't open HKLM to edit the registery setting always getting errors, so can anyone help me, i am using IR port because i don't have USB cable for this model,
Any help will be appriciated.
Take Care
ENJOY
Hello to all! I'm new to the forum, but I have read a lot of information here and really like it.
I have an HTC Touch Diamond II. I had to do a software reset. Now I don't have a Quick GPS, that's why I downloaded SeaSgee. It worked and downloaded the packedephemeris.ee, but now when I click on Download button, it shows me this error:
Error: Send error!
I think that the problem is in the phone options or in the firewall of the windows XP may be...
Please help me,
thank you!
Ok..so first of all thanks for clicking on my thread.I hope somebody can help me flash a rom.I can't post the link because I'm new....I added a text file with the link(yes, it's on xda)
Post #9 describes a process of flashing this rom.
My device: HW6915 vG.39 G4(flash chip)
I am having trouble with this step pdocwrite spl -n0 -b 0x20000 0 0x80000.
Yes I know what the bootloader is and I know how to get into it.So after I connect the device via usb(while in BL mode) i run the command mentioned above.The problem is that nothing happens(screenshot included),it just stays at the same command and does not progress at all.CPU usage is little to none.And if I do try to flash the rom anyway the progress bar on sable_RUU gets stuck at 1% and after a few minutes gives an error.I tried this on XP 32 and on 7 64.
Yes, this is my first post, so take it easy.
Thanks for any help.
hello. i have the same problem but my sable ruu progress bar freezes at 51% and then pop up error:201. help?
For you it's stuck at 51% because you also flashed the bootloader(CEBL.nbf).I chose not to as it's optional.Even so I'm still stuck on the original problem.
Anybody know the answer to this?
my problem is identical. i am also having trouble with pdocwrite spl -n0 -b 0x20000 0 0x80000.after i run the command nothing happens,it just stays at the same command and does not progress at all as in your case. then when i run sable_ruu it freezes at 51%
did you try...
did you try opening the command prompt as administrator?
Code:
1. Click on start
2. Type command
3. Then either right click and then pick run as administrator or just CTRL + SHIFT + Click
If that doesn't work you can try disabling UAC by clicking start, typing UAC pick the first option then dragging the slider to the bottom and restart computer
You need to write SPL when phone is on and connected with ActiveSync, not in bootloader.
Spiaatie said:
You need to write SPL when phone is on and connected with ActiveSync, not in bootloader.
Click to expand...
Click to collapse
Ok it works thanks guys for all the help.
Will report back to your thread and tell you about my findings
Thanks,appreciate it
Thanks from me too. On the first look wm 6.1 runs faster than 5.0 and gps does not work (igo 2006 plus-can not find gps com port).
my suspicions on gps is it might be driver related in asset viewer (Settings/System/MyCPL 7) under GPS it used to state whether it was on or off in WM5 but now it says N/A
jambongo said:
my suspicions on gps is it might be driver related in asset viewer (Settings/System/MyCPL 7) under GPS it used to state whether it was on or off in WM5 but now it says N/A
Click to expand...
Click to collapse
Yes the driver is indeed missing as this is ported from a hp without gps(i guess so anyway).First clue is that it doesn't include any base navigational software.
Second igo 8 reports ''gps driver not found''
n can you! help???
you seem to know how to proceed to tryin' roms on you hw6915;
......i don't!
can u help me, i'm really a newbie on this!!!
i wish there was an "upgrade your ipaq verson for dummies" or somthing!!
i got the hp ipaq hw6915, an usb connector, Internet access!! anything else?
oussahoo said:
you seem to know how to proceed to tryin' roms on you hw6915;
......i don't!
can u help me, i'm really a newbie on this!!!
i wish there was an "upgrade your ipaq verson for dummies" or somthing!!
i got the hp ipaq hw6915, an usb connector, Internet access!! anything else?
Click to expand...
Click to collapse
Beware dude this is higly experimental.There is no GPS for example.The rom is wm6.1.This is just for people who want to test and no it obviously not official.All files can be found at the link in the TEXT file I attached to my first post.
1.Connect your device to activesync(suggest a hard reset first,however it's optional)
2.Extract SPL vG.39.7z anywhere you want.
3.Run ''Command prompt'' (if using vista/7 RUN AS ADMINISTRATOR)
4.Enter this command pdocwrite spl -n0 -b 0x20000 0 0x80000 (WAIT UNTIL IT FINISHES).This command replaces a file in the ROM which allows you to flash ''non-original roms'' basically software CID unlocking which allows flashing of ''cooked roms''
5.You will get warnings on your hp regarding a dll file(itsutils.dll) PRESS YES
6.Put your device in bootloader mode.[hold the two buttons next to the joystick(the round thingy) and shortly tap the reset button with your stylus
7.Open activesync,go to connections and untick allow USB connections
8.Extract 6915_ENG.7z and run Sable_RUU
9.Press on the big ''Upgrade button''
10.There will be a progress bar, when it's done it should say something like '' Update finished !!''
11.Go back to activesync and re-tick allow USB connections
I wrote this for everybody who's got trouble flashing roms on their hw69xx.Yep I had this problem too.
This detailed enough?
jambongo said:
did you try opening the command prompt as administrator?
Code:
1. Click on start
2. Type command
3. Then either right click and then pick run as administrator or just CTRL + SHIFT + Click
If that doesn't work you can try disabling UAC by clicking start, typing UAC pick the first option then dragging the slider to the bottom and restart computer
Click to expand...
Click to collapse
A question ....
but it happens to me the same error in XP and not out of the 1% resulting in the error 201
Can you help me!
hi
I have the hw6915
to me the procedure doesn't go
he/she writes me "client_initialize Fail Error 601"
a question: what I write on the Command Pront
thanks
for further information
the cell doesn't connect him to activesync
it is jammed on screens her/it USB - LOGO HP INVENT and in low vG.39
THANKS
@spiaatie
mine is in bootloader
however it doesn't connect him with Activesync
what do I have to do?
which procedure do I have to do?
thanks
can't program ipaq 6945
When ever I push upgrade button, it just hangs and afer a while I get the message:
client_getosver Fail !! Error :501
I'm using it on windows XP,
could someone help me!!!
Thanks!
rra_pn said:
client_getosver Fail !! Error :501
Click to expand...
Click to collapse
Did you install SPL?
Yes, I did de pdcowrite on command prompt, then it gave me the warning on my ipaq and then it finished.
After that I unticked the allow usb connections on active sync
then I press the two buttons next to the joystick and press the reset
I run sable
and then it does what i Posted
Thanks!