I have an Qtek S100 and an Leadtek 9537 gps reciever, worked good with bt and all first times, but now i cant get any satelites, TOMTOM says im not connected to any satelites and tomtom gps shows the same only stands try to connect, but nothings happening what to do please help, i have hard resetted and installed everything again and even take away the battery with same result BT connection work fine, but not connected btw the reciever and satelites. Is it broken????
Related
Hi, Could someone please help me with my BT-77 GPS and TT5 installation on my XDA2 as it's driving me mad, I don't even know where to start, but please be patient and read on.
The TT5.21 is installed on the XDA2 and the maps on a 1GB card and it seems to be working fine (Well I haven't tried it on the road yet). I also bought a BT-77 GPS. When I go into Bluetooth manager in the PPC, I see the GPS and it's bonded( according to the message next to it). I see both blue lights flashing (3sec on blue at every 2 sec on the red)but when I go into the settings of the TT5, I choose OTHER BT GPS and when selected I get the screen with GPS is connected to: BT on COM6 at 4600 baud.
Now, in the bluetooth settings on the PPC I only have COM4 for inbound and COM5 for outbound.
So what's going wrong and do I need a BT GPS driver on the PPC?
I get the circle in the top right spinning on the gps status screen as if its searching for a satellite signal, but i place the BT77 outside and theres nothing after 50 mins
i have tried coming out of tt5 to check my bluetooth settings and it says its off but the blue light is flashing! i have unintalled the tomtom bluetooth support so i can manually turn on the bluetooth, still no effect on sat receiption.
Also, the method of getting it to work on the xda exec doesnt work wither on this model
UP AND RUNNING!!
many thanks to forum member edsub for his post on the last page of this thread!
http://forum.xda-developers.com/vie...ys=0&postorder=asc&highlight=tomtom&start=375
i followed his instructions and voila!
the key is to soft reset alot and to select com 5 in tomtom gps settings
Please help
I re-insstalled TT5 on my MDA Compact/S100 after cold boot.
After pairing an adapt 300 BT receiver, I installed it in TT on Com5, like before
It worked like a charm before, but now I see only about 9 greyed-out satelites and TT is telling me "no useble GPS signal".
the longest I have waited for more then an hour but no change.
Re-installed the whole thing, restored a backup in which I had no problems. Been trying for days now
Still no useble signal
Installed TT5 on a Vario/Wizard, same problem.
Can the receiver be faulty?
Can anyone please help me?
UPDATE:
I also installed Navigon 5.
Program finds the receiver, but also cannot find a good signal.
Went back to the store, I will get a new receiver. It is probably faulty
Before anyone says anything, yes I have tried looking.....
I have a problem with TT5.21 where I can connect to the BT GPS several times but then all of a sudden TT won't connect again. The only way I can do it is to delete the pairing with the GPS reciever and re-pair it setting up the COM ports again. It will then work fine 3 or 4 more times and I have to do it again.
I know the GPS works fine as it works perfect on my Alpine (believe it or not).
Has anyone any ideas?
Thanks in advance.
Yes, I have this problem too, no set times or obvious reasons as to why tomtom loses gps, still appears in bluetooth device list, but tomtom cannot see it, only way to get tomtom to recognise the gps is to delete pairing and re-pair gps.
Eventually figured it out. When setting up the initial pairing (or was it com port), I cleared the use secure connection radio box and it seems to be fine now.
Thanks for your response though and I hope this works for you too.
Is it possible to use both TomTom (with a bluetooth GPS node) and a bluetooth headset at the same time?
I've managed to do it although that was on an old O2 ROM, not the new one.
Hi All,
I'm running the new Rom for a week now and i'm very happy with it.
Although I my Jamin has reset itself once or twice my SD card never dissappeard.
There's a new problem I'm having:
When I start TomTom 5.21 my GPS (Adapt) and activate my bluethoot GPS TomTom keeps telling me there's no GPS..
When I delete the partnership from the Bluetooth settings, then create a new partnership.. it says BT GPS wants to connect, and I have to enter the pin. After This my GPS is working again.. Untill I power of my GPS.
Anyone had the same experience.. or even better... the solution?
Thanks.
Hi , I'm running Copilot and noot had any issue. i no longer use TomTom due to their incompatability. It always seems you have to have an update with every new device with them.
Not very helpful I know but I would hazard a guess its due to TomTom and not your upgrade.
I have an adapt (ad-700) receiver and do not have any problem. I always start the gps device first and then tomtom (tomtom activates bluetooth by itself).
I also get the message "no device" but after 10 seconds or so it finds the gps mouse.
Thank you all. Tried reinstalling TomTom.. after some a couple of try's it worked finally. Thank you for the response.
hi
I have an magician(Qtek S100), and i buy a Nokia Wireless GPS Module LD-3W.
When i try connect with the buetooth, the magician detects the module, i select it, put the pass key 0000, and the wait cursor stay visible 2minutes...
After that it say that the passkey is wrong but is the correct.
I try connect again and agian and the reseult is the same!
After try many times it connect.
I use the tomtom navigator for the pocket pc, after detect the bluetooth gps, most of the times, the program detects the signal of the satelites so that the pointers are the gray and says “no valid signal of gps”, and the satelite light of the gps stay off,
So, the gps only correctly works sometimes :S !!
I dont know why it happens!
Can anyone telme what is happen??
Thanks,
Psyke