Hi all
I've just returned home with my new MDAIII and like any kid with a new toy (I'm 52) I want to get it on the internet.
This is my setup.
I have 7 PCs in my home (I know, it's sad!) all sharing a 1Mb internet access provided by my Billion wireless ADSL Modem/Router.
I have Norton Internet Security 2005 installed.
The router allocates IP addresses to the 7 PCs and it was a breeze to setup.
I know this is the lazy way out but as I have difficulty in following instructions in the manuals can anyone give me easy instructions on how to get on the internet using my WiFi LAN?
Many thanks
John
Related
Hi there,
Don't know if this is even possible I've read all the articles I could find here and tried Microsoft web pages. If you can help ill most appreciate it.
(Apologies if this has been answered please let me know the link...)
My internet connection (at home) is via NTL cable, My 4 pc's connect to the internet via a Linksys router, each PC has a private IP address along the 192.168.1.x subnet which NAT to the router for internet access - all transparent.
I do not have a proxy server at home, connection is established because each PC uses the router as a gateway for internet access.
My XDA2 refuses to talk to the internet via Activesync. I can confirm that my handheld connectiviy text bubble says that the internet connection is pointing to the PC connection. the paramaters in Active sync passthorugh are set to internet - But it just won't work.
I even tried configuring the proxy option to the routers address no avail.
The XDA wants to keep defaulting back to its GPRS connection.
At the moment I have disabled the phone completely to stop it dialing out whilst I am testing.
I'm out of ideas can anyone help !!!!!!!!
I managed to fix this problem. I set up a personal proxy server from
http://www.youngzsoft.net/ccproxy/ its an excellent proxy only 815k in size and its intelligent enough to understand NAT'd IP addresses etc for connections to routers.
All I had to do was to configure the XDA 2 work profile with the proxy server address then the internet passthrough worked fine.
For Bluetooth access (I use a D-link USB bluetooth adapter). I had a problem getting the XDA 2 to launch the bluetooth connection under the activesync. I used the excellent pocket bluetooth tools
http://216.239.39.104/translate_c?h...t+bluetooth+tools&hl=en&lr=&ie=UTF-8&oe=UTF-8,
after installing this the connection worked straight away with BT internet access as well.
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Hi I am new to this forum, and like the person above am trying to find a way to browse files on my PC through my XDA2 (i-mate).
I am connected via bluetooth to my PC, activesync is working fine this way, as is internet browsing on my XDA2 using my PC's internet connection.
All I wan't to do is be able to sit away from my PC and get files from it to the XDA2 via bluetooth.
Apparently using Resco File Explorer and a wi-fi connection you can set up a network with your PC, but when I try this with Bluetooth it doesn't work - surely bluetooth can offer the same file sharing - just slower???
Please help us if you know a way!
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
essojay said:
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
Click to expand...
Click to collapse
sorted!!!
BR
I got me a new 2i, and now want to use the wifi function from home as well as hotpspts etc.
I got me a Linksys Wireless-G 54mbps Broadband Router (Back compatibale with 11 b)
Any usefull tips on which software I can use to connect to my home pc and browse to my documents/mp3's/ etc and stream to the 2i?
Also with this I would like to be able to set up a VPN from the 2i so i can remotley connect to my desktop pc when away from home, and do this from a hotspot etc.
Any advise?
Thanks
Just use pocket IE or file explorer and type in the UNC path of the location on your home PC, e.g. \\HOMEPC\MYMUSIC.
Could you let me know which version you are using for the XDA IIi and which model WAP? I've been trying to get my IIi to work with a 3COM OfficeConnect WAP to no avail (both work and home). Work WAP is carrying about 5 different client WIFI cards (and a HP IPAQ). Home WAP is carrying 3 different WIFI cards. No problems in either case. Just my XDA IIi is unhappy. Home WAP is running the lastest firmware from 3COM and Work WAP is running original firmware. My XDA IIi doesn't work with either. I have managed to get the XDA to WIFI on a neighbour's WAP working. Which seems to indicate that XDA IIi is OK.
I've seen another post where there was a problem with a linksys 54g / XDA IIi
Similiar thread: http://forum.xda-developers.com/viewtopic.php?t=20178
Anybody got any ideas?
UPDATE: Got IP address @ work wap from MS DHCP server. Can ping/traceroute using vxUtils, but the device doesn't appear to "know" it's connected. IE, etc still tries to use GPRS.
wifi and vpn
I am also unable to keep a vpn connection going with my wifi. Any help appreciated.
Internet connection over VPN over Wifi
I am also unable to keep a vpn connection going with my wifi. Any help appreciated.
Click to expand...
Click to collapse
I managed to establish a connection and got access to the internet via a VPN-Server in the local network connected via Wifi to my XDA mini. I had also problems with vpn connection going down.
Unfortunately I have some troubles with my Wifi card, so I don't have the exact settings. But AFAIR the problem was solved by doing this:
- Going to Settings->Connections->Connections->Advanced->Execptions
- Using New URL to add "*" and "*/*".
(I have a german version, so I'm not sure, how the buttons are labled in english)
I think the problem is, that the software thinks, VPN connects always to the INTRAnet at your workplace. By adding this "Exections" you tell the device, that the hole internet is included in the intranet.
Maybe there is a routing tool for PPC which can solve this, too?
hey, ive been scooping on here for a while and this is my first post.
ive searched for over an hour and i havent found the answer.
i downloaded internet sharing cab and installed it, it runs fine on my wm6, but when i connect it to my laptop using usb, the laptop cant get the IP address.
it eventually says limited connection on my laptop. any ideas?
TIA
Cliff
I can tell you from experience (i connect this way) that you don't need to install anything on your laptop exept for active sync (i think the latest one is 4.5) after you do that you enable internet sharing in your wing ( start/programs/accessories/internet sharing) after you enable it you connect your wing to your laptop, at that point your laptop should regognize your phone as a network connection. you can now browse the net.
if you're on the 5.99 proxy there is one more step. you have to configure Internet explorer to use the proxy. I don't remember everything off the top of my head but I think it goes like this settings/ connections tab/lan settins/proxy server
from there you just enter the same proxy and port that you did on your wing. you should now be able to surf.
the thing is, my phone is unlocked and im on the cingular network. i have all the settings for it. internet explorer works on my phone.(i get internet on my phone)
when i connect it to my laptop, it detects it like its supposed to, BUT it doesnt get the IP address. if you have anymore info, let me know
thanks
Cliff
My searches on the web haven't yielded much help or information so I thought I would come to the experts...
I have a Treo 750 that I just "upgraded" to WM6 2 days ago. I noticed that DUN has gone away and was replaced by ICS. After configuring my laptop to use that instead of DUN I connected and was surfing the web. My problem now is VPN. I travel frequently (luckily I'm in the office until Jan.) and regularly used my phone to connect to the corporate network via VPN. I also work with a lot of other companies and have VPN access to their systems as well. Basically now I can open my Cisco VPN client, connect to a VPN gateway, authenticate, get assigned all the appropriate IP information, but cannot communicate on the network. What gives? Is there a solution to this? If not, what the heck was MS thinking when they did this!? My phone is basically useless for one of the major reasons I bought it...
Any help is appreciated!
thanks!
Ok, further searches found that DUN can be added back into WM6 via a cab that was posted here at the XDA forums. I installed it and the DUN service is now visible again. I unpaired by phone and laptop, re-paired, and included DUN. Now when I try to connect, I get the DUN connection box after the bluetooth connection is initiated but when I click DIAL I get the DIALING... prompt, followed by Error 678: The remote computer did not respond.
Anybody get this working on a Treo 750? Thoughts, ideas suggestions?
What is the ip address you are getting via the cisco vpn client
It maybe that it is in the same subnet as the ip address assigned to the pc from the wm6 ics. The ICS gives the address 192.168.0.1. and if your Cisco is also giving a 192.168 address then you will have two routes for the 192 address range thus giving you the problem when accessing hosts.
If this is the problem Im pretty sure you can change the address allocated via the ICS using a registry editor. If not you may be able to get work to use a different range for you on the cisco vpn.
Our corporate network is 172.x.x.x so it's nowhere near the 192.168.0.x assigned by the phone. When I look at the route in the VPN client I see 192.0.0.0, 10.0.0.0, and 172.0.0.0 so I am assuming 192 is my laptop, 10 is the phone, and 172 is the corporate network.
I'm guessing NATing is the problem. I've been reading that if I use a different APN (isp.cingular instead of wap.cingular) there is no NATing. I've tried both, and I've tried turning off and on the "force AT&T" proxy setting to no avail.
Tried the DUN cab hack that is floating around for WM6 also. The service is active again and I can also add Modem Link back in and my laptop sees my Treo as a modem but when I dial I get an error stating the remote computer did not respond. I'm guessing along with going from WM5 to WM6 AT&T also updated the radio so the old communications protocols don't work anymore?
Hello Sir,
I have exactly the same problem... I have successfully connected via VPN, however unable to communicate with any devices on that network... Then what is the use of VPN on the phone? I've tried searching online for answers, but no luck... People are having the same problem but no one knows how to solve it... I'll try and trouble shoot this problem more as soon as my exams are done...
Hi
Working successfully for me. I am using Imate jasjam wm6. Pc using cisco client connecting via ics on phone. I have telstra 3g connection tested ok on both telstra.internet (Nated ip) and telstra.extranet (real ip).
You are correct it may be an nat issue. Can you check that your transparent tunnelling is on as follows: right click on your connection entry in cisco client and select modify then transport tab. Check that enable transport tunneling is enabled ipsec over udp(Nat/pat).
The other thing to check is that the cisco vpn server aslo has transport over Nat on as well.
Also are you sure your corporate ip range is 172 or is that the range given by the cisco vpn to clients.
Transport tunneling is on (always was). I'll have to check with our network admin and check on the VPN server setting...I guess as long as I have connectivity back to the office, I don't need it that badly for all the customers I need to connect to at various times.
Yep, positive on the corporate IP. Right now it is 172.28.1.87 and I'm in the office.
Thanks for the help so far. Got any other suggestions on how I can troubleshoot further?
One other thought...should I modify the registry on the phone to assign a different IP address to my laptop? Would that help?
Same Problem
MX. I am having the exact same issue but with Securemote VPN. I've looked through the registry and found the assigned address, but I'm wary of changing anything until I can find some more information.
Anyone out there ever change the DHCP configuration for their phone?
Somewhat related question?
Im attempting to route my connection on my mobile through a laptop acting as a wan bridge, then uplinking it into the router. The issue Im having is that XP and WM6 both use the same IP Block. Ive read and read and cant find much to tell me how to change the WM6 IP BLock to something like 192.168.2.1 rather than the default 192.168.0.1
Does anyone have any pointers? Ive looked through the registry. There MUST be a simple way to change a default.
To clarify my setup, I am using ICS Via USB into a UMPC laptop running XP. The UMPC is set to share that same connection back out over Ethernet. The ethernet runs into my WAN Uplink on the router and then back out via wifi/rj-45
This setup works as I have done it using Wifi with other networks, and I can chose the "Lan3" to share under the advanced settings on the UMPC. The reason I dont just share out via Wifi from the start is that Wifi on my Kaiser and Raphael both make the device to hot to charge, thusly killing the battery within a couple hrs of sharing. If I share via USB , it stays pretty cool and still charges.
Anyone have any pointers?
I have already tried tricking XP into using the Lan on another block but as soon as you try to share the USB lan, it reverts back to the 192.168.0.1
The only way I can imagine is a registry modification or a program change in ICS.
Thanks Much!
How do you do this? I have just been reading up on this and apparently it is very easy to get hacked or for someone to see what you are doing when you are connected to a hotel connection. I am going on vacation in about a month and plan on using my laptop on the hotel network. From the research I have done it seems like a VPN is my best bet? Anyone know about this stuff? I just don't want my passwords and credit card info getting swiped.
Use OpenVPN and tunnel all of your laptop's traffic to a secure remote location, or better yet, to a computer at your own home that has the OpenVPN server setup properly.
This will make it very difficult for anyone to see what you are doing.
Or, tether your phone's internet if that is a possibility for you and then use OpenVPN on your phone's tether if you're still worried.
DIY
If you're running Windows you can make your Windows computer a VPN server really easily. Here's how.
Windows XP
http://www.onecomputerguy.com/networking/xp_vpn_server.htm
Windows 7
http://www.windows7library.com/blog/networking/a-quick-vpn-server-using-windows-7/
Then you need to go into your router and forward port 1723 for VPN traffic to the computer you just set up this VPN server on. Do a search on the brand name of your router plus 'incoming vpn port forward'
Once that's set you'll need a Dynamic DNS service so that you can access it over the Internet by name, even if your IP address at home changes. You can set this up for free here.
http://dyn.com/dns/dyndns-free/
Of course if you're on a Mac I can't help you there lol, I'm not a Mac guy.
Last up, if you're at a hotel, VPN connections don't always work coming out of a hotel due to cheap/crappy setups. To PoisonWolf's point, having tethering on your phone is always a great backup in case the hotel's Internet access isn't good.
B