I got me a new 2i, and now want to use the wifi function from home as well as hotpspts etc.
I got me a Linksys Wireless-G 54mbps Broadband Router (Back compatibale with 11 b)
Any usefull tips on which software I can use to connect to my home pc and browse to my documents/mp3's/ etc and stream to the 2i?
Also with this I would like to be able to set up a VPN from the 2i so i can remotley connect to my desktop pc when away from home, and do this from a hotspot etc.
Any advise?
Thanks
Just use pocket IE or file explorer and type in the UNC path of the location on your home PC, e.g. \\HOMEPC\MYMUSIC.
Could you let me know which version you are using for the XDA IIi and which model WAP? I've been trying to get my IIi to work with a 3COM OfficeConnect WAP to no avail (both work and home). Work WAP is carrying about 5 different client WIFI cards (and a HP IPAQ). Home WAP is carrying 3 different WIFI cards. No problems in either case. Just my XDA IIi is unhappy. Home WAP is running the lastest firmware from 3COM and Work WAP is running original firmware. My XDA IIi doesn't work with either. I have managed to get the XDA to WIFI on a neighbour's WAP working. Which seems to indicate that XDA IIi is OK.
I've seen another post where there was a problem with a linksys 54g / XDA IIi
Similiar thread: http://forum.xda-developers.com/viewtopic.php?t=20178
Anybody got any ideas?
UPDATE: Got IP address @ work wap from MS DHCP server. Can ping/traceroute using vxUtils, but the device doesn't appear to "know" it's connected. IE, etc still tries to use GPRS.
wifi and vpn
I am also unable to keep a vpn connection going with my wifi. Any help appreciated.
Internet connection over VPN over Wifi
I am also unable to keep a vpn connection going with my wifi. Any help appreciated.
Click to expand...
Click to collapse
I managed to establish a connection and got access to the internet via a VPN-Server in the local network connected via Wifi to my XDA mini. I had also problems with vpn connection going down.
Unfortunately I have some troubles with my Wifi card, so I don't have the exact settings. But AFAIR the problem was solved by doing this:
- Going to Settings->Connections->Connections->Advanced->Execptions
- Using New URL to add "*" and "*/*".
(I have a german version, so I'm not sure, how the buttons are labled in english)
I think the problem is, that the software thinks, VPN connects always to the INTRAnet at your workplace. By adding this "Exections" you tell the device, that the hole internet is included in the intranet.
Maybe there is a routing tool for PPC which can solve this, too?
Related
Hi there,
Don't know if this is even possible I've read all the articles I could find here and tried Microsoft web pages. If you can help ill most appreciate it.
(Apologies if this has been answered please let me know the link...)
My internet connection (at home) is via NTL cable, My 4 pc's connect to the internet via a Linksys router, each PC has a private IP address along the 192.168.1.x subnet which NAT to the router for internet access - all transparent.
I do not have a proxy server at home, connection is established because each PC uses the router as a gateway for internet access.
My XDA2 refuses to talk to the internet via Activesync. I can confirm that my handheld connectiviy text bubble says that the internet connection is pointing to the PC connection. the paramaters in Active sync passthorugh are set to internet - But it just won't work.
I even tried configuring the proxy option to the routers address no avail.
The XDA wants to keep defaulting back to its GPRS connection.
At the moment I have disabled the phone completely to stop it dialing out whilst I am testing.
I'm out of ideas can anyone help !!!!!!!!
I managed to fix this problem. I set up a personal proxy server from
http://www.youngzsoft.net/ccproxy/ its an excellent proxy only 815k in size and its intelligent enough to understand NAT'd IP addresses etc for connections to routers.
All I had to do was to configure the XDA 2 work profile with the proxy server address then the internet passthrough worked fine.
For Bluetooth access (I use a D-link USB bluetooth adapter). I had a problem getting the XDA 2 to launch the bluetooth connection under the activesync. I used the excellent pocket bluetooth tools
http://216.239.39.104/translate_c?h...t+bluetooth+tools&hl=en&lr=&ie=UTF-8&oe=UTF-8,
after installing this the connection worked straight away with BT internet access as well.
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Hi I am new to this forum, and like the person above am trying to find a way to browse files on my PC through my XDA2 (i-mate).
I am connected via bluetooth to my PC, activesync is working fine this way, as is internet browsing on my XDA2 using my PC's internet connection.
All I wan't to do is be able to sit away from my PC and get files from it to the XDA2 via bluetooth.
Apparently using Resco File Explorer and a wi-fi connection you can set up a network with your PC, but when I try this with Bluetooth it doesn't work - surely bluetooth can offer the same file sharing - just slower???
Please help us if you know a way!
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
essojay said:
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
Click to expand...
Click to collapse
sorted!!!
BR
This is my first post here after browsing for a while, so hello everybody.
I have recently bought an O2 XDA Mini S - lovely bit of kit all round, but I am confused about its wifi.
For example, you can define connections, but cannot define a connection to use wifi - it has irda, bluetooth, gprs and gsm. Is there a reason for this?
When I try to access my PC's shared drives the XDA says it cannot connect using the current connection settings (wifi). Is there a way of connecting to my PC LAN over wifi, rather than just using the LAN as a channel to the internet?
I have VERY slow DNS name resolution - several minutes or failure for any domain name. If this works the download speeds are great.
I guess I have not configured things right:
I have tried both entering a DNS IP address, and not. Both are slow to resolve.
Power mode is set to best performance
Confused and missing decent documentation...
Julian
I originally posted this message a few days ago but as there were no responses I thought I'd try again. I'd appreciate any advice - thanks for looking ...
I have a XDA mini S. At home I have a wireless router/hub that is hard connected to my PC, but I connect to internet from my laptop via wifi (direct to router/hub) using an always on broadband connection.
I use WPA security, but when I tried to set up the XDA to connect wifi it didn't seem to have the ability to enter the WPA settings.
Ideally I'd like to use the XDA to network with the PC and the laptop for file transfers, but if I can't do that, at least I'd want to enable the XDA to access the inernet via the router/hub directly (ie without the other devices being turned on).
Can anyone help with this please - I know from other postings on this site that I'm not the only sufferer, but I haven't see a definitive solution.
Thanks
Charles
Make sure wireless is ENABLED.
Then
START->SETTINGS->CONNECTIONS->NETWORK CARDS
Click the "Wireless" Tab
Add a new connection
General Tab
Network Name: "MyNetwork" (or whatever you want)
Connects to: "The Internet" ("Work" also works for me)
Network Key Tab
Authentification: WPA-PSK
Network Key: "makeUpAKeyHere_thats-long&complex" (I use plenty of ££%!* type characters in mine)
802.1x Tab
Uncheck Use IEEE 802.1x network access control
All done!
Now make sure you have EXACTLY the same Network Key in your router and you should be good to go.
Now to connect to your PC & Laptops you use Resco Explorer 2005 (you'll need to buy it but worth every penny!) to MAP shares from your network.
How to is in This Thread
Worked for me, and I've only had my Mini S (my first PDA ever) a week!
Good luck!
Mark.
I just got my MDA Vario (same as XDA Mini S right?) today and the manual has absolutely nothing about connecting over wi-fi to *anything* let alone my home wi-fi router but I was pleased to find this thread , for a while
START->SETTINGS->CONNECTIONS->NETWORK CARDS
Click to expand...
Click to collapse
doesn't have a "wireless" tab (or any tabs for that matter) but it does offer me a list of adapters to let me modify settings (no option to add one though).
The nearest thing to wi-fi is "SDIO WLAN Wireless Adapter" but I'm pretty sure that would relate to something plugged in to the SDIO slot, and not the built in Wi-Fi hardware. Am I wrong?
I've fumbled around a bit and found one screen which offers a view where I might be able to enter the details you've given here, but the textboxes are all locked/readonly (empty) and I can't write anything in them.
I'm really disappointed so far.
the sdio card is the correct one, the wizard has an sdio wifi card inside I believe.
if you select network card under settings-connections you should be able to add a new connection there, if in doubt search for wifi connection, or post back here for more help, good luck
R
I got a PM about this thread, I thought I'd reply here to as the info could help others....In additon othres may be able to elaborate more on the 802.1 query
Mark,
I had the same problem regarding my mini s which you recently answered. I have a US robotics wireless router (9108) and connect it to my laptop (Thinkpad X31) using WPA-PSK and TKIP - the laptop does not allow me to check 802.1 which I understand is for large companies with a special server.
With my miniS I have found that as soon as I enter authentication WPA-PSK and encyption TKIP, the system automatically ticks 802.1 and I cannot access the page to turn it off.
I have tried communicating with O2 via email but they haven't really helped. What I want to know is whether on your machine with WPA-PSK and TKIP you can turn off 802.1 in which case mine has a fault and I can swap it - otherwise I have to find another smart phone!
Click to expand...
Click to collapse
Hi there, I'm a new user of these phones and understand little of Networking but I'll share my settings with you...
Under "Configure Wireless Network" I have:-
Under "General" Tab I have:-
Network Name: MyNetwork
Connects To: Work
Under "Network Key" Tab I have:-
Authentification: WPA-PSK
Data Encryption: TKIP
{Greyed Out} The key is automatically provided
Network Key:- ABCDE1234&*^ <- Whatever key you make up
{Greyed Out} Key Index: 1
Under "802.1x" Tab I have:-
Ticked use IEEE 802.1x network access control
(I can't change this.)
However on my domestic Netgear DG834G router everything connects just fine, g or b. Have you flashed your phone to the latest O2 firmware?
Mine is
ROM 2.21.4.1 WWE
ROM Date 3/9/06
Radio Version 02.07.10
Protocol Version 413.1.03
ExtROM Version:- 2.21.4.101
I hope this helps,
Mark.
PS. I'll post this in the thread too, it may help others.
hello
i recently purchased the xda mini s and a wifi usb adaptor. i am having trouble accessing the internet. my computer connects to the internet using ethernet to my wall (im not sure where it goes from there). i can connect my phone to a peer to peer wifi network but it does not let use the internet, could anyone help me with the settings please i would greatly appreciate it.
many thanks
harvey
To achieve that you need to set your primary connection as shared in network connections. Once you do that, adhoc mode should be possible without issue.
Please help - similar problem
Hi - I have an XDA Mini S and have connected without issue to the Internet via my router (Wirelessly of course).
The issue I have is that I cannot connect to any network shares on my PC. When I had a CF wireless card in my Ipaq I could do without issue. I have downloaded a ping proggy to XDA and can ping router but cannot ping the PC I have the shares on.
Normally (If I was using a laptop) I would check Workgroup/Domain settings, authentication credentials etc...nothing like this on XDA.
Please help
Wiggz
Quick - fix
I have spent hours messing around with this - however I have had a similar problem with a corporate laptop which wouldn't work.
I changed the router from WPA to WEP and bang - worked straight away. Exactly the same on my XDA Exec so should be same for Mini S (pocket PC 2005).
Hope this helps.
unable to find network wifi
i am using o2 xda mini s to connect my laptop via wifi for transferring files.
it shows the connections status excellent on both devices with ip address 169.254.72.236 on ppc and 169.254.130.63 on laptop.
i used laptop ip address as gateway address on ppc network wifi adaptor setting.
using ping with this ip(169.254.72.236) from laptop it shows success. but can't share folders and transfer files. when i try to open the pah from the file explorer in ppc or laptop it says 'unable to find network that support this ip address' either by entering the name of computer or by entering ip address
help me in using this facility.
MDA Wifi Wont Connect
Hi there-I have an mda vario which I was able to unlock as it was locked to t-mobile and I am with another network. After ages I was able to get a connection to my router or at least it says that it is connected. However I still cant connect to the net via wifi on my mda. I have put in the settings for wpa and wpa-psk, etc have unticked the 802.1x box etc but still no joy. Can anyone help?
Thanks
Morgas
Hi all, new here, thanks for the info posted, was useful but i'm still having problems with the wifi on my xda mini s to my netgear dg834gt router with sky broadband.
The problem seems to be that my xda finally connected to my broadband and router, but now when I try to use internet explorer on my xda I just get
"400 Bad Request"
"Bad filename."
Can anyone help with this? Thanks in advance
Hello,
Well I hope I'm putting this post in the right place, if not please move it. I have a 8525 with cingular. I need vpn access for my office connection from my laptop. We use a Fortiwifi 60 with the Forticlient software for VPN access. I used it with the old wireless modem settings on my 8525 and it worked with both wap. and isp. I recently upgraded to the new offical rom and used it fine (without trying the VPN access) for a few weeks. I went on my first trip last week and could not connect to the vpn. It would verify PSK and X-AUTH but fails to pull an ip address. I tried it with a static ip and it failed as well. When I check my connection monitor it shows no data coming back from my vpn gateway. I tried it on the hotel's internet and it works fine. I also tried another wifi signal and it worked as well. I changed the media net settings to go through isp instead of wap but that didn't help. Does anyone else have this problem with there VPN settings? I wonder if it is the new type of connection sharing or a change to the Cingualr network? Any help would be appreciated.
Thanks.
dechutes said:
Hello,
Well I hope I'm putting this post in the right place, if not please move it. I have a 8525 with cingular. I need vpn access for my office connection from my laptop. We use a Fortiwifi 60 with the Forticlient software for VPN access. I used it with the old wireless modem settings on my 8525 and it worked with both wap. and isp. I recently upgraded to the new offical rom and used it fine (without trying the VPN access) for a few weeks. I went on my first trip last week and could not connect to the vpn. It would verify PSK and X-AUTH but fails to pull an ip address. I tried it with a static ip and it failed as well. When I check my connection monitor it shows no data coming back from my vpn gateway. I tried it on the hotel's internet and it works fine. I also tried another wifi signal and it worked as well. I changed the media net settings to go through isp instead of wap but that didn't help. Does anyone else have this problem with there VPN settings? I wonder if it is the new type of connection sharing or a change to the Cingualr network? Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
I had the same problem with another IPsec client with this ROM. For some reason I could not get Internet Connection sharing to work when connected via USB. Bluetooth pan worked. The VPN client was not binding to the ICS/usb adapter. I have since upgraded to WM6...Sleuths ROM...and USB/ICS now works.
Well I tried the phone on another computer and the vpn works just fine. I guess it's something on that computer. Anyone have any ideas? I'm going to try reinstalling the virtual adapter in hopes that it is a binding issue (thanks to tco for that). I'll let you know if I figure it out.
Hi,
I don't think this is currently possible but I do not see any reason why? Does anyone know if there is a 3rd party app to provide this?
Thanks,
Phillip
Possible ! (Well somewhat)
This is very much possible. I got it working as follows :
(1) Create a WiFi connection on Pocket Pc with ad-hoc feature and Open Security, make sure you select "Work" as the connection.
(2) Give the WiFi adapter on Pocket PC an internal address similar to 192.168.0.2 (255.255.255.0)
(3) On your PC/Laptop set WiFi adapter IP to 192.168.0.1 (255.255.255.0)
(4) You need a program like Pocket PC Proxy to be installed on the Pocket PC.
(5) Enable proxy settings on Laptop as 192.168.0.2:80 (or the port set on the proxy prog on ppc)
(6) Enable WiFi on ppc
And Voila ! You can browse internet using the connection on your ppc.
Hi,
Thanks, I will give this a try. However, I can't seem to find this piece of software (Pocket PC Proxy). Can you point me in the right direction?
Thanks
Here you go...
Thanks for the download, I'm using an HTC Touch (Elf) with WM6. I can't seem to figure out how to create an ad-hoc wifi connection?
(Sorry to be a pain but i think that this will benefit others too!)
Ahaa, I managed to figure out how to create an adhoc network on the Pocket PC, I assigned it the correct IP (as above) and basically followed the instructions.
I'm actually trying to get my iPod Touch to connect to the net via the HTC Touch.
I iPod sees the wifi connection and connects perfectly, I can even assign the ip and subnet mask. However, I simply can not connect to the internet either with or without the proxy. Any suggestions on what I am missing?
THanks
What kind of an internet connection do you have on the ppc ?
- GPRS/EDGE ? Is it always connected/on ?
Got it working, you can ignore the following
Thanks!
------
Hi, here is everything I have done:
Connections, Internet
Modem: T-Mobile Internet, GPRS (UK, no edge)
Proxy Settings: This network connects to the internet
This network uses a proxy server to conncet to the internet
149.254.291.132
(This was all set by the phone when I switched it on)
My Work Connection:
Nothing set up here
WIFI
Add New...
Network Name: test
Connects to: Work
This is a device-to-device (ad-hoc) connection
Authentication: Open
Data Encryption: Disabled
This seems to create an ad-hoc connection and sits there with 'Connecting' until another device connects to it.
Network Adapters
My network card connects to: Work
IEEE 802.11b/g Compatible WIFI....
Edit:
Use specific IP address:
192.168.0.2
255.255.255.0
(Everything else blank)
Wireless LAN
SSID: test
Mode: 802.11 Ad hoc
Channel: 11
When I connect two devices together the IP shown under advanced seems to read 192.168.0.21 (I think this should end .2 so not sure why it isn't)
If I connect my laptop I can 'ping' 192.168.0.2 and that works but both my laptop and ipod touch do not seem to be able to connect to the internet.
On the ipod touch I simply get 'Server not found' or something similar.
(I have remembered to run PocketPCProxy)
Yes, the GPRS is connected whenever I run PocketPCProxy.
I would really appreciate any help you can give, I really like using the browser on my ipod Touch but don't really want to go the whole hog and buy an iPhone because it is so tied down and restricted.
Thanks,
Phillip
I don't know what I have done but suddenly it works, now it comes up and shows the correct ip on my pocket pc.
Anyway, thanks for your help!
Hi everyone,
I have been trying to ad-hoc connect my PC (Lenovo X60s with XPSP2) to HTC Touch via WiFi to be able to share files and stream music.
It did connect and pinged ok, however the two just refuse to see one another on their networks.
Does anyone have any successful experience trying for the same?
Regards,
Madana
I tried this between my TyTN and TyTN II, the latter being the gateway, but the TyTN insists on still using GPRS for its internet instead of the wifi. Very annoying, and it's runing WM5 so (i dont think) you can't turn of the GPRS like you can with WM6.
Does anyone know how to make it use wifi, and wifi only for internet?
Thanks,
Sebastian
i have installed pocket pc proxy after a file called ......ppc3.arm.cab (i don't remember how it begins) but it doesn't work... any idea?
same here the pocket pc proxy when i run shows a fatal error in running it.
what should we do??
Hello,
I have samsung c6712 with wifi connected with internet near internet company with router as it is free for me, setting and pasaword is setted by those guys on my phone but they didnot give me their password and settings.
i like to run/use internet on my pc (xp32) with cable connection. How can I use that
[email protected]