New ROM 157 :
QtekS100_FRA_DT_10302_157_10100_Ship.exe
For T-Mobile (originale ROM modified with xda3nbftool.exe change OPERATOR from QTEK to T-MOBILE)
Using xda3nbftool.exe (attached here)
Download xda3nbftool.exe, and put it in the same directory as the 8 ROM files.
Fourth Step:
Build a batch file, name it change.bat or whatever you like in the directory where you put ROM files.
Paste the following in it:
------------------------------- paste the data below ------------------------
xda3nbftool -x ms_.nbf ms_.nba 0x20040522
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -so T-MOB101 -sl WWE ms_.nba
xda3nbftool -so T-MOB101 -sl WWE nk.nba
xda3nbftool -so T-MOB101 -sl WWE radio_.nba
xda3nbftool -c -u NK.nba
xda3nbftool -c -u ms_.nba
xda3nbftool -c -u Radio_.nba
xda3nbftool -x ms_.nba ms_.nbf 0x20040522
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
del *.nba
------------------------------- paste the data above ------------------------
See PrintScreen
j'ai pas pigé comment un fichier de 60 ko peut modifier une rom de 30 méga!
ça marche ton ruc ou ça modifie uniquement les chiffres dans proprieté?
ta mise à jour foncrtionne avec la rom originale s100 (celle avec la radion 1.00.10)
how do you build batch file???
the attached file is not the ROM, it's just an EXE to modify the QTEK ROM into a T-Mobile ROM
Let's say I DL the ROM from the QTEK Website, the ROM is made for QTEK, if you have a QTEK and not an MDA T-Mobile
You just DL the 28MB ROM you double click you say next you wait 45 min and you have a new ROM
But let's say you buy your device in Germany, so you have a MDA T-Mobile (T-Mobile is the OPERATOR) and you want to be able to upgrade using the QTEk ROM.
You need to modify the ROM (acutally modify only the OPERATOR and the COUNTRY) so you don't get COUNTRY ID ERROR
You need to extract the ROM you just DL, in the same folder, on your PC you need to have the "xda3nbftool.exe"
you need to make a BAT file (like a text file using notepad, and you stick the whole line posted above (bellow and above the ------------)
You save this as BAT (example toto.bat)
You open a dos prompt, you run the toto.bat, and this will go into the files in your rom, and modifie the OPERATOR and the COUNTRY
In my case I repalce the WWWE with FRE
The simple way to do it is to have a folder right below C:\ name it 1 for example
So at DOS prompt you are at C:\ you tyoe CD 1 and you will be under C:\1
The simple the better (if you take un sub sub sub sub folder, and you name it "update rom from qtek to t-mobile in my bedroom......" this will take you more time to type it)
After that, I just update, as I will do if I have a QTEK and the ROM provided by the QTEK company
And it will work.
You can allway save the modified ROM for re apply someday or pass it to friends whohave a MDA T-Mobile and would liketo have it in French QTEK ROM
I hope I'm clear
see ya
PS: I find all this doing SEARCH in this forum, I did not invented. Everything was already made by some nice guys. Just search what you looking for you will find it
ROM in FTP
For people who have a QTEK S100 (buy in Belgium or France)
use this link : ftp://xda:[email protected]/QtekS100_FRA_DT_10302_157_10100_original.exe
For people who buy the MDA T-Mobile in Germany and would like to have it in French QTEK (like the original)
use this link : ftp://xda:[email protected]m.xda-developers....0_FRA_DT_10302_157_10100_For_MDA_T_Mobile.exe
On this last one you will see this screen ( I just want to make sure you are not going to make a mistake so I warn you on starting screen)
S100
MERCI MERCI MERCI :lol:
2 JOURS QUE JE NE DORMAIS PLUS A CAUSE DU BLOCAGE
What's about a MDA already passed in french with a qtek ROM? Wixh upgrade do I need?
Tx for your help :wink:
Now I have an Qtek Rom (details)
- ExtROM : 1.03.149 FRE
- ROM : 1.03.02 FRE du 11/02/2004
- Radio : 1.00.10
- proto. : 1337.36
:?:
@stephane or anyone who isn't sure what language/operator to use:
I don't know if Jam upgrades are like hima upgrades
but in Himalaya you can see which one to use by :
running getdevicedata on your pda
copy \windows\devicedata.txt to PC
open it with Notepad, somewhere in there are language and country/operator your machine is now.
I always check this before doing an upgrade.
what rom ?
as I can see on your signature, your QTEK is an MDA T-Mobile
So I guess you buy it in Germany
So you need the second ROM (not the ORIGINAL)
Read my post above :
you buy in France or Belgium = ROM ORIGINAL
you buy in Germany (even if you have already modified the ROM from German to French) you still need the MODIFIED ROM
Any how if you really want to know, DL the original ROM (the first one above) start the process, the ROM will be decompress into a folder, than the ROM will send a file to your QTEk (no arm don't worried) and a message will be returned.
If the ROM see that you don't have an ORIGINAL QTEK FR it will return an ERROR (COUNTRY ID ERROR) and you wont be able to continue.
Then DL the other one and do the same things.
UNTIL YOU CLICK "UPGRADE" nothing append to your DEVICE (see print screen above http://forum.xda-developers.com/files/latest_rom.jpg (it will show you have this and that and we are going to upgrade your device to this and that) and you have to click UPGRADE
oupsss forget to sign in
the post above "GUEST" is from me "Bruxelles5" I forget to LOGIN
My mystake
cimer bruxelles5 ))
thx!
mda T-MOBILE passé en Qtek S100
bonjour à tous,
j'ai bien suivi les indications de notre cher "bruxelles5" et hier soir j'ai flashé mon MDA :shock:
après 35 min de stress :roll: il s'est finalement rallumé en Qtek SANS aucuns message d'erreur !! merci beaucoup
voila ce que j'ai comme rom maintenant
- version ROM : 1.03.02 FRE
- ROM : 11/02/2004
- Radio : 1.01.00
- proto. : 1337.38
- version de extrom : 1.03.157 fre
Comment fait-on pour installer la maj de l'appareil photo numérique ? et est-ce que cela vaut le coup ?
Par ailleurs, je souhaite acheter une oreillette BT ainsi qu'une balise GPS
BT, faut-il un matériel spécial pour que les deux fonctionnent simultanément ?
merci encore..... :wink:
_________________
T-Mobile MDA Compact @ Qtek S100 French
honestly I have install the MAJ for the camera, and I did not see any changes !!!
J'ai moi meme installe la Mise a jour Camera et je n'ai rien vu comme changement
A+
I HAVE THIS ON MY QTEKS100
ROM version : 1.03.00 WWE
Radio version : 1.01.00
Protocol version : 1337.38
ExtROM version : 1.03.100 WWE
WHAT DO I DO TO TURN IT IN QTEK FRENCH VERSION?
THANKS FOR YOUR PRECIOUS HELP
French ROM no more available ?
Hello Folks,
The french ROM is no more available ?
ftp://forum.xda-developers.com/Magician/Rom Fre/QtekS100_FRA_DT_10302_157_10100_original.exe
Thanks for your help
French ROM no more available ?
Same remark, could you help ?
Ok I found it here : http://t005.tgv.net/QtekS100_FRA_DT_10302_157_10100_original.exe
It works great for me, but no real difference...
Still translation pb, for example : Camera -> Tools icon -> "Options" then the first menu is "Ajustar la vista" (it is spanish in a french rom ...)
Yesterday I had an error message in german when my phone was out of battery with a SD inside.
It's the same in Italian, probably there is an extended rom with the menu corrected
Yes I agree with you because the message come from the camera App, and this app come from the Extended Rom.
Do you have also the german error msg ?
Last thing, on some calls the name does not display even if the number is correct. If I call back the number the name is displayed well...
Do you have this ?
I see all the other messages in Italian, so the unique exception is that menu in Spanish.
I never saw an error in German.
Probably You have the contacts stored without your country prefix.. so they aren't displayed in incoming calls :?
Related
Hello,
I tried to upgrade my XDA french with the new ROM 1.2 but I get the error : unsupported language 'FRA'
I read about adaptROM.exe but not sure what I have to do and if the current version will work with french ?
What I have to do to flash my XDA ?
Thx
Can I take the .nbf extract from the XDA-developers-SER-v12.exe and use xdarit to write into a sd-card.
Then flash my XDA using bootloader ?
Is it a solution to avoid the language problem ?
apparently there are some language differences between programme-a versions, some use 'FRE' some use 'FRA', adaptrom tries to modify the rom so the english programme-a will assume the nbf to be correct.
until someone modifies adaptrom to support different language versions of programme-a, I think using xdarit is the easiest way. ( again warning, to leave the bootloader checkbox unchecked! ).
Thx for your answer.
I anticipated it and tried with the WM2003 nk.nbf and xdarit (old veriosn) and it worked. Just want to try the WM2003 first but I will put the ROM 1.2 after.
So for french user using xdarit works with WM2003 rom.
I will confirm the same with the 1.2 rom as soon as I try.
did you manage to put the French version on a O2 XDA or on the bouygues version calles IPDA ?
(ca m'interpelle j'ai jamais réussi a le mettre en VF mon XDA O2)
No I have the XDA french version (l'ipda de bouygues) and wanted to flash it, to get the latest version (WM2003 or the XDA dev rom 1.2)
I don't care to have it in english. Using the jeff's exe didn't work but using the xdarit method works (now I have the WM2003 rom)
J'avais appele Bouygues et ils m'ont dit qu'ils ne fourniraient pas de mise a jour de ROM en fr. Comme ca m'est egal d'avoir un OS en anglais mais que je veux les dernieres verisions (notamment le always on GPRS), je l'ai flashe avec un rom english.
ok i do understand now cause i always have used mine with the english version (i dont bother to use it in english too)
i ve read the IPDA is only 32 MB RAM, info or intox ?
cause 32 MB does not allow to upgrade in ppc2003
(perso j'utilise la 2003 depuis 15 j et c'est ... un autre xda que je découvre notamment gprs always on)
The french version of the XDA (the ipda from Bouygues) has only 32Mb RAM. But the Rom size is only important to upgrade no ?
Well, the WM2003 upgrade worked, but now I put the XDA dev rom 1.2.
Because I had bad reception, bad sync ...and some trouble with 2003.
Will wait the XDA dev Rom based on WM2003
By the way thx to the XDA dev guys, your rom is wonderfull !
i switched back to 1,2 either, intempesive reboots and radio signal sitche off regulaly with the 2003 beta, i ll wait till the final relase goes out.
got also gps problem with 2003 version gps is not always recognise by the os or the softaware using tom tom navigator
For Bouygues Ipda owners, I put a cooked rom based on WM2003 4.00.05 (thx to the XDA dev Kitchen) and it works good.
No more active sync problem, good GSM reception, and for the moment no bug...
Got now new SMS counter, separate system and phone sounds...
I’m stuck with a stick French ROM 3.16 which I installed on to of a 3.19 English ROM to test and see.
From your experience, I understand that I should be able to overcome the FRA language error using the XDArit method.
Before I proceed, can you please confirm the following?
1. In order to use the XDArit method I must have an SD card reader?
2. XDATools will not do the job.
Hello everybody.
I have a htc tytn:
and i have a problem when would open a live tv on orange world.
When i click on the picture of the canal, pvplayer is opening and i have message of error : la taille de la sequence depasse la largeur maximale (148) ou la hauteur maximal (192). ( the larger of the sequence is too big, she exed the larger maxi (148) or the width maxi (192))
I suppose is a problem with my pv player is not compatible.
PLease send a exemple of the last version of PVplayer.
Me i have the 3.3 build 007.
A people who have a SPV M3100 can give a pvplayer??
Thanks
Like you can see i'm not a good english man i'm a french user
nobody can help me?
Please a need ARTEMIS P3300 DUTCH ORIGINAL ROM .
thak you
I would love a copy too.. I have 6 bricked devices of staff members who tried updating the device on there own..
Ik heb de nederlandse maar weet niet hoe ik een copie er van kan maken.
Als iemand me dat kan uitleggen.
Heb de HTC p3300 met originele HTC wm5 software in het nederlands
----
I have the Dutch but i dont now how I can make copy there of. If someone can explain me that. THE HTC i have are p3300 with original HTC wm5 software in Dutch
giegel said:
Ik heb de nederlandse maar weet niet hoe ik een copie er van kan maken.
Als iemand me dat kan uitleggen.
Heb de HTC p3300 met originele HTC wm5 software in het nederlands
----
I have the Dutch but i dont now how I can make copy there of. If someone can explain me that. THE HTC i have are p3300 with original HTC wm5 software in Dutch
Click to expand...
Click to collapse
The problem is, a copy of your phone won't help! because you will not be able to flash a unsigned rom to your Artemis, unless you flashed it with pof's USPL! So they really need the original Dutch ROM but as far as I know it does not exist.
engilsh rom is available but er si no dutch version.
You need a rom whcih you can flash through usb instead of hotsync
locomomocolo said:
Please a need ARTEMIS P3300 DUTCH ORIGINAL ROM .
thak you
Click to expand...
Click to collapse
it tries to see here
ftp://[email protected]/Upload/Official MDA Compact III ROM
giegel said:
Ik heb de nederlandse maar weet niet hoe ik een copie er van kan maken.
Als iemand me dat kan uitleggen.
Heb de HTC p3300 met originele HTC wm5 software in het nederlands
----
I have the Dutch but i dont now how I can make copy there of. If someone can explain me that. THE HTC i have are p3300 with original HTC wm5 software in Dutch
Click to expand...
Click to collapse
Misschien werkt dit?
Hi guys, I have been looking for a while now how to backup the Artemis ROM. I put up a little
tutorial, hope you guys think it is usefull.
----------------------------------------------------------
1. Download ITSUTILS by Itsme: http://nah6.com/~itsme/itsutilsbin-20070323.zip
2. Extract the files to a directory.
3. You will find pdocread.exe inside the extracted directory.
4. Make a directory somewhere on a disk, where you want to save the parts to lets say for example
C:\ROM
5. You have to type these commands in the DOS command window (Click Start -> Run..., type CMD on
the Open box then Click OK)
Backup the following parts like this:
SPL:
pdocread -n 0 -b 0x20000 0 0x100000 C:\ROM\bdk0-spl.nb
CID:
pdocread -n 1 -b 0x10000 0 0x40000 C:\ROM\bdk1-0-cidarea.nb
GSM Data:
pdocread -n 1 -b 0x4000 0x10000 0x4000 C:\ROM\bdk1-4-gsmdata.nb
GSM Radio ROM:
pdocread -n 1 -b 0x40000 0x140000 0x280000 C:\ROM\bdk1-5-gsmcode.nb
Splash Screen:
pdocread -n 1 -G 0x30000 -b 0x10000 0xF0000 0x30000 C:\ROM\bdk1-f-splash.nb
Extended ROM:
pdocread -h 0x[HANDLE] 0 0xf00000 C:\ROM\ExtROM.nb
Change [HANDLE]. You can get the handle by typing pdocread -l Watch out! the Handle is different every time.
Locate 7.99Mb or 14.9Mb depend of model,
pdocread -l
Example:
If
handle ee9de576 7.99MB 0x7fe000
the correct sintax is:
pdocread -h 0xee9de576 0 0x7fe000 c:\rom\ExtROM.nb
OS (for HTC P3300):
pdocread 0x0 0x3900000 c:\ROM\OS.nb
furthermore they are different from Artemis derivations
for ARTE100 (HTC P3300) it is 0x3900000
for ARTE200 (O2 Orbit) it is 0x3500000
for ARTE300 (LOVE, i.e Dopod M700) it is 0x3E00000
B.R.
Hello !
I tried to add my city to the Touch Flo : Colmar, France
and used this tutorial :
Add Small Citys to the Weather View
1. Install WeatherDatabaseEditor_1_1 2. Go to Accu Weather Homepage 3. Enter the City u would like to add 4. Copy the Text from the URL which appears then: EUR|DE|GM001|STUTTGART Example 5. Here: EUR|DE|GM001|STUTTGART 6. Copy this one in the WeatherDatabaseEditor.You have to CHoose your Country above and then Click Edit->Add City and under Accu Weather Code u paste in the copied Code and have teh City u want.
Source: PocketPC CH
Click to expand...
Click to collapse
But after having installed WeatherDataBaseEditor, I have en error message : you must install the newer version of .Net Compact Framework
When I install .net CF 3.5 on my HD I have an other error message : "The installation of Microsoft .NET CF 3.5.CAB has failed"
I don't know what to do...
Try to use this one, it is the french one
Essaye d'utiliser celui ci, c'est la version française car j'ai cru comprendre qu'il y avait plusieurs versions. Perso j'utilise celui ci et ca fonctionne bien.
http://www.megaupload.com/?d=MPS3Z5CB
Il me semble que j'avais installé cette version (FR) mais bon, je peux réessayer...
Merci à toi !
Hi,
here is a guide.
wfg
starbase64
Mew789 said:
Il me semble que j'avais installé cette version (FR) mais bon, je peux réessayer...
Merci à toi !
Click to expand...
Click to collapse
Por favor escribe en ingles
Please post in english as is the official launguaje of this site
Thanks, merci, gracias
Sorry for the french...
starbase64, it's impossible for me to use WeatherDatabaseEditor because I cannot install the .net compact framework 3.5. I don't know why...
Mew789 said:
Sorry for the french...
starbase64, it's impossible for me to use WeatherDatabaseEditor because I cannot install the .net compact framework 3.5. I don't know why...
Click to expand...
Click to collapse
may be because you are using an application that requires .net 3.5 (ie. the failed application/error message in the background). just a wild guess. try a soft reset then install 3.5 immediately after it boots up.
Same thing after a soft reset...
starbase64 said:
Hi,
here is a guide.
wfg
starbase64
Click to expand...
Click to collapse
Hi Starbase64,
Thank you for posting the link to the tutorial. Could you post those files here in this thread. The site is in another language and requires registration to download. I would much appreciate your efforts as well as the XDA community.
Mew789 said:
Hello !
I tried to add my city to the Touch Flo : Colmar, France
and used this tutorial :
But after having installed WeatherDataBaseEditor, I have en error message : you must install the newer version of .Net Compact Framework
When I install .net CF 3.5 on my HD I have an other error message : "The installation of Microsoft .NET CF 3.5.CAB has failed"
I don't know what to do...
Click to expand...
Click to collapse
"Install WeatherDatabaseEditor_1_1"
Hi to everybody. And a Happy New Year 2009.
Can someone tell me where to find the .exe file for this? When I click the above, it redirects me to links containing the name itself but there is no any .exe file.
Dear All,
This is, almost, my first thread here ... sorry by advance for my poor English
1 - Introduction
I have worked with GhostXSeries to translate and provide the community with a WM6.5.5 Rom Kitchen including Sense 2021 and/or 2018.
I suggest you to have a look on the original threads (WWE version) for more details:
Dedicated thread to the WWE Version
Global Thread both WWE and FRA
The main idea is to lock and remove the global thread in order to split and maintain 2 dedicated threads per version.
So, please keep me in the loop regarding any issue you face I will do my best to work on and fix it...
Hope it helps and good cooking !!
2 - Kitchen Detail
Available Language : FRA (040C)
RAM: 576
OSKitchen Zero: 1.33.5
Base Image: Tweaked 3.14 LEO FRA
OS: 21913 (COM2) and 29022 (COM3)
Sense: 2018 and 2021
Office 2007
Facebook 1.1.0.26 - Latest version
MS My Phone - Latest version
3 - LinksThe french kitchen version is available HERE
4 - Change log
July, 12th, 2011: Initial release
5 - CreditsA big thanks to GhostXSeries for his agreement and his original work !!!
I fully support NinoFR in translating my kitchen to French. If others want to do change it into other languages they are more than welcome!
Any feedback ?
Anyone has tried this kitchen :-(
Regards,
Nino
Bonjour NinoFR ,
Très bonne idée que cette traduction mais le lien de téléchargement est invalide .J'aurai bien essayé ce kitchen kit en francais.....
pdream said:
Bonjour NinoFR ,
Très bonne idée que cette traduction mais le lien de téléchargement est invalide .J'aurai bien essayé ce kitchen kit en francais.....
Click to expand...
Click to collapse
Hello,
This is true ... I will upload again the correct file to another host.
Regards,
Nino
Download URL updated in 1sty post
Regards,
Nino
Could you update your headder, stil shows old date
GhostXSeries said:
Could you update your headder, stil shows old date
Click to expand...
Click to collapse
Shame on me.. this is not an update but just the download URL what was not available any long !
I have just uploaded the file to another host :-(
Regards,
Nino