Hi,
I'm trying to share my GPRS connection with my friend who has the IPAQ 1940. I'd like to use the Bluetooth connection.
I am using the BluetoothGPS.zip bluetooth stack which is basically the IPAQ one.
Can I just initate a SSA connection on the IPAQ and it'll automatically dial on mine?
To share Xda II intenet access to group of ppc or PC, I use pocketpcproxy (I named it ).
But that program are not perfected yet. If you are interesting, please check at http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=72
or http://en.pdamobiz.com/en/default.asp :wink:
Thanks, that's what i'm looking for...
BUT I noticed that the Widcomm bluetooth hacked drivers cause a lot of problems with the Pocket PC... Once you install that, your regular bluetooth gets messed up.
Also, you cannot use the Widcomm for SSA.
I'll email him anyway, thanks
I installed the Toshiba bluetooth stack on my I-Mate Jam and it ROCKS - it includes ALL the functionality/profiles missing in the MS stack!
...BUT...
It is unstable as hell (I have experienced all sort of "cosmetic" issues) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
...SO...
has anyone figured how deinstall/reinstall the microsoft bluetooth stack on a Magician (I-Mate Jam, Qtek S-100, MDA Compact, XDA Mini)?
cseilern said:
...BUT...
It is unstable as hell (I have experienced all sort of "cosmetic" issues) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
Click to expand...
Click to collapse
So, what "ROCKS" about it?
Always do full backup b4 installing sware.
it does what the MS BT stack does (serial port, headset, activesync), but also adds other profiles (pan, dun, obex, ftp, chat + others from memory)
i.e send files/chat with other mobile phone users, access bt pan, etc... though i am only interested in pan, chat and obex
when i fisrt played with it, i immediately saw why everyone whinges with the bt stack...
it's excellent and stable for me, didn't expierence any bugs...
dutty:
Did you get pan working ?
If so can you please let me know how?
Thanks,
Martin
I'm kinda interested ...
Can u please post a copy of that Toshiba Bluetooth stack u're using so we can all have a chance to have a look at it and maybe modify it to work on our phones
uh, just started the service, restarted the device and connected to it!
BUT, i also installed the toshiba BT stack on my workstation
I'm kinda interested ...
Can u please post a copy of that Toshiba Bluetooth stack u're using so we can all have a chance to have a look at it and maybe modify it to work on our phones
And just more thing ... How did u manage to get that bluetooth stack to run on xda devices since it keeps checking for external SD bluetooth cards and was not designed for internal bluetooth chips ?
Look in this thread:
http://forum.xda-developers.com/viewtopic.php?t=15382&highlight=
Thanks for the link ....... BUT !!
I was able to download the Toshiba BT Stack v5.01 but it won't seem to work on my xda !! Everytime I tap on Bluetooth Setting (from toshiba) It says the following ' An error occurred with the Bluetooth Card. Confirm that the card is working properly.
Both my MS Stack and Widcomm Stacks are disabled and don't conflict with this new Toshiba Stack.
I was wondering how the thread owner got this BT stack running on his xda ?
It works on my XDA Mini just fine. The only problem I'm having is that it won't stay resident when you power off the device.
cseilern said:
I installed the Toshiba bluetooth stack on my I-Mate Jam and it ROCKS - it includes ALL the functionality/profiles missing in the MS stack!
...BUT...
It is unstable as hell (I have experienced all sort of "cosmetic" issues) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
...SO...
has anyone figured how deinstall/reinstall the microsoft bluetooth stack on a Magician (I-Mate Jam, Qtek S-100, MDA Compact, XDA Mini)?
Click to expand...
Click to collapse
As for disabling the MS stack, look here.
Got another Question ??
Will this new stack work on a Qtek2020 ? I've tried installing it on my Qtek2020 but it won't recognise my bluetooth hardware !!
Any sugestions ??? :?:
cseilern said:
I installed the Toshiba bluetooth stack on my I-Mate Jam and it ROCKS - it includes ALL the functionality/profiles missing in the MS stack!
...BUT...
It is unstable as hell (I have experienced all sort of "cosmetic" issues) and I am fairly sure this is due to the fact that both MS and Toshiba stacks try to use the same bluetooth hardware SIMULTANEOUSLY.
...SO...
has anyone figured how deinstall/reinstall the microsoft bluetooth stack on a Magician (I-Mate Jam, Qtek S-100, MDA Compact, XDA Mini)?
Click to expand...
Click to collapse
Oops, sorry, look here for info about turning off the MS BT stack.
RE
From the download link provided it showed support for WM2003. How about WM2003SE?
Anyone feedback in using on WM2003SE?
Thanks
:roll:
i think the imate jam runs se?
:roll:
RE
Sorry, another question.
In the event of a hard reset will my O2 XDA II restore the MS stack with whatever registry settings that were deleted in the process of installating the Toshiba bt stack? Will the Toshiba bt stack be totally removed in the evnet of a hard reset?
Thanks again
yes sir
Found 2 problems.
Cannot connect when call ring.. connect then call is fine.
Cannot Accept call with button on headset.
Any more Problems ???
Please post your problems ..
Hi
i´ve tested the toshiba bt software on my MDA-Compact but haven´t got very good results. First, after installation, it seems to work good with my Royaltek RBT 3000 (GPS), but after i´ve switched off the device while an active bt connection was established with my gps software, the bt-stack broks down and the whole systems seems to be unstable. Even after a softreset the bt-software from toshiba says that they didnt recognize any bt hardware.
Now i am trying to deinstall the bt-soft and can recommend everybody who wants to test to make an backup before ;-)
I think that the software from toshiba could work, when the ms-bt-stack would be completly changed with the toshiba-stack, but doesnt work without problems when both bt-stacks are on the system.
Regards
FluBeX
I guys, I have an MDA Compact with Microsoft BT Stack (it doesn't allow LAN profiles ).
What I want to kno is if it's possible for a pc to share Internet connection without using activesync.
That's because of my main pc has some profiles and everytime I disconnect myself fomr my profile activesync stop to work.
So my ppc is not more able to surf on web! :evil:
Any solution?
the vidcomm bluetooth stack support PAN
Rudegar said:
the vidcomm bluetooth stack support PAN
Click to expand...
Click to collapse
I know but how to install it on Magician :wink: ?
have you tried the normal vidcomm cab files found around this forum ?
they should work for xda2's but then they were not made for xda2's so maybe it works on yours as well?
Rudegar said:
have you tried the normal vidcomm cab files found around this forum ?
they should work for xda2's but then they were not made for xda2's so maybe it works on yours as well?
Click to expand...
Click to collapse
I heard that they doesn't work on Magician
Only Toshiba stack works but with lots of troubles
Hi guys,
Im trying to setup PAN with my Jam with the bluesoleil stack and it just isnt working... whenver i browse my PC it says that no services are available... any thoughts on how to get the JAM to recognize the PAN service on my PC?
ImmortalU said:
Hi guys,
Im trying to setup PAN with my Jam with the bluesoleil stack and it just isnt working... whenver i browse my PC it says that no services are available... any thoughts on how to get the JAM to recognize the PAN service on my PC?
Click to expand...
Click to collapse
Is dectection set on on ur computer, and does your bleutooth stack support the PAN profile?
me too, i've placed a BT PAN enabling topic 3 times. geuss you guys haven't noticed
windows installs the PAN service and i have the option/canconnect to my device via PAN from windows, but my device cannot detect the PAN or any service on my PC.
what kind of device you have, i remember i had the option too when i installed widcomm BT stack. but it crashed my device later. i have a htc wizard. PAN does work on wm5 but i don't have it in my rom
As its a Magician forums i thought it would be obvious?
I got an MDA compact with the Qtek WWE 1.12 ROM.
Using the Bluesoleil stack with the Cambridge Sillicon stack aswell.
My bluetooth adapter on my PC is generic, i actually have no idea what it is!
thanas said:
PAN does work on wm5
Click to expand...
Click to collapse
How ?! I have WM5 on my mda compact 2.
Has anyone got to work any external Bluetooth modem with any of BA WM6 ROMs?
I am trying to use Nokia N95 as modem from my Qtek 9090 upgraded to latest WM6 ROM from xplode. Even though pairing and initial modem setup goes OK, all further attempts to use modem fail. From N95 I don't even see that BA is trying to establish Bluetooth connection to Dial-Up Networking service. I have MS Bluetooth stack, one that comes with original ROM from xplode.
Any help is very appreciated. Thanks.
In theory there should be no problem - after pairing you have list of services from your cell phone and you should be able to use DialUp (and number *99# or *99***x#, where x is connection CID number, if finally Nokia found out what is CID) or Bluetooth PAN, if n95 has fuction similar to Internet Sharing, like WM6.
I used this method successfully with nokia 6230i, SE k750i and k810i (the first one worked fine even in ppc2003, but ir required a bit of fight).
I have been successful in using my SX66 as modem for my laptop.
My N95 is perfectly working with laptops too. It actually also worked with some Asus PPC. I also know how to setup external modems in WM6 and how they should theoretically work. But I could not make any phone working with BA/WM6.
In the original post I asked whether or not has anyone succeeded to make their BlueAngel PDA working with "phone as Bluetooth modem"?
If answer is YES, please tell me how you did that and also specify the ROM version.