Related
I have a belkin router. It works well with several laptops.
I can connect to it with my JASJAR and get an IP address.
If I sync pop3 email it uses WIFI and works as expected.
If I sync journal bar it uses WIFI and works as expected.
However if I try to use internet explorer it alway tries to start a GPRS session and refuses to work through WIFI. :evil: Why??
Ive sent hours trying every setting I can find.
Anyone have any suggestions? :?:
Jon
At least your Wifi network doesn't crash as soon as u connect the JJ. Mine doesn't even get that far...
Anyone who can help???
Hmmm I wonder if this is something in the Telstra settings Cab.
Re those having problems all on Telstra?
Might try a hard re set and then manually build the settings.
Jon
Try de activating the phone. this allows you to use IE via your wireless router.
Tried that, thanks.
I just get the "Cannot Connect" message and if I dismiss it. Nothing!
However I can sync the weather without getting the "Cannot Connect" box. SO the WiFi is working, its just that Explorer can see it.
Im running the O2 UK firmware and it works fine (auto gives prefernce to the WiFi if I am in range, try loading on the genuine Imate firmware.
Jon
I know how you feel. I can't get wifi to work. Heck, I can't even use IE when synced to the computer via USB :evil:
Have you tried messing with the settings in start/settings/connections/connections?
I finally got it working.
You have to chose the "Telstra Internet" setting in Network Managment.
Its in Settings, Connections, Advanced, Select Networks, select "Telstra Internet".
I then did, Settings, Connections, Manage existing connections, Modem, and set it to "Auto"
It uses the WiFi first and then only uses GPRS if there is no WiFi.
Hope this helps someone else !
Jon
Can anyone help me with just getting my JJ connected to the wifi network without crashing the router?
Have you tried turning off any encryption etc and re booting the router.
Then try to connect at the most basic level?
Now I'm totally confused
I don't know what is going on!
I have finally managed to use IE via Activesync, using "Telstra Internet" as my My network connects to...
I tried again to hook up to the wifi network. The router is connected to my desktop via a physical cable, and my tablet pC is connected wirelessly (my JJ syncs with the tablet). I turned to tablet off, and then connected the JJ to the desktop wirelessly. On the desktop, I am no longer able to connect to the internet, but for some reason, the JJ is able to connect to the internet :shock:
But, even if I disconnect the JJ from the network, my desktop is unable to connect back to the internet until I reboot the router. What does this all mean????
I have the same issue with my MDA Pro! i done even have the sutp option in the modem settings. I can connect to my belkin router with encryption but no response when in IE!
Anyone else got any other suggestions?
I'm beginning to think that nobody has a solution to such connection problems. Is there any hope on the horizon? Any chance of something being sorted out by MS?
BTW, how well does BT syncing/internet connection work?
Ok frustration rising.
I can connect to my Belkin wireless router with no problems but I can only log onto the router and not browse the internet!
I have checked that the proxy is not configured.
Anyone got any ideas?
Nope
I have a MDA PRO
Rom Version: 1.12.42 wwe
Radio : 1.08.00
Protocol: 42.41.P8
Ext rom: 1.12.126 WWE
What I want to do: I am trying to connect to the internet using pocket internet explorer using my wifi network at home and not GPRS.
The problem: I go to 'Settings' >>"connections" tab >> 'Network Cards'>> "wirelss" tab
It displays my wifi connection and it says "available" so I {tap and hold} and select 'connect'. It then states that it is 'connecting' but it doesnt connect and reverts back to saying that my network is "available'.
What am I doing wrong? Do I have to set up something on my pc? Any additional settings on my Universal that i should initiate?
I tried searching the forum with no luck in finding someone with the same problem. Is there a thread with a guide that can help me out. Thanks for your time.
soft reset the phone
then no need to go into settings
on today screen (main screen) touch the "G" at the top
it will ask you if you want to activate wifi
select
it should connect automatically
I have exactly the same problem with my M5000.
Can anyone help?
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
What happened there ! :roll:
On the Blue Angel, it was simple - you just set up a new connection, enter the PSK, connect and off you go!
On the Universal, however, I'm having no joy. I've set up the WEP and PSK stuff and the PDA can connect to the network, but when I try and open IE it opens up GPRS. Also, PC Anywhere only works via USB - again, it won't connect via WiFi. I'm sure it's just a case of adjusting some settings but I don't know which ones!
Wifi Connection Problems
Hi I'm experiencing exactly the same problems trying to connect.
I have a Wanadoo Livebox and my xda exec.
I've tried with my connection both unsecured and with 128bit wep encryption using the correct wep key....I still get connecting, followed by available, repeated continuously?
I have the xda set to connect to "the internet" and the authentication to "open". Key index is 1.
Can anyone help?
Thanks
Tim
Wifi Connection Problems
Hi, Just a bit more info...
Encryption is set to "wep"
Mac address is associated with the livebox.
802.1x is ticked to use IEEE 802.1x network access control.
EAP type is Smart cCard or Certificate
Thanks
Tim
Rom version 1.13.82 WWE
Rom date 11/30/05
Radio version 1.04.02
Protocol version 42.37.P8
ExtROM version 1.13.188 WWE
I just checked (with my Blue Angel) that the router and everything else is working and I'm happy to say it all is.
I set up the new connection on the BA from scratch - WPA-PSK enabled, nice long PSK, and I'm using TKIP. Network connects to: The Internet.
This allows me to remote up to the PC via PC Anywhere, and allows me to connect to the 'Net for free via the WiFi router.
When I duplicate the settings on the Universal, neither of the above works. What am I doing wrong?
Help!
You haven't got mac address filtering enabled on your router, and have forgotten to add your Universal's mac address to the list, have you?
Cheers,
Steve.
No, it's disabled.
hehe i had this problem tonight and was going to post up.
Has your router got MAC-control or anything on it? My SSID is not set to broadcast so I put the settings in manually.
I deleted the settings, and put them in manually again a few times, making sure I had the encryption stuff set correctly.
Eventually it connected and now seems to be working fine.
JAmes
Ad Hoc?
Ok, I've tried every possible combination possible and nothing is helping. So my next question to get around this problem>>>>>>>>>>>>>>>>>>>>>>>>>
Can I use my pc as a ad-hoc and us it as my gateway for my Universal?
I have a pc in the office down the hall with the actually wireless router, I have a pc in my room that is accessing the wireless router from the office.
Please let 'US' know if you have tried ad hoc or if you find the right settings to connect to the main wireless router.
Thank you
I am on my wifi network typing this, and my settings show 802.1x network access control not having a tick and network adapter connected to Work......on my iPaq hx4700 before, I used these same settings as they seemed to work well, although it ran WM2003SE not WM5.....
All this said, however, but I was lucky in that my MDA Pro connected to my wifi network at the first attempt - except not with as strong a signal as the iPaq had.....
Wifi Settings
Can anyone who has connected okay, let us have their full settings, so that we can try them?
Is your Router set 802.11g only?
You need to set the router to accept 802.11b and 802.11g.
If your router will only output at 54g, you could try the hack to switch the universal to 54g. I am yet to try this so I don't know if it works.
My MDA Pro connected straight out of the box once I set the ssid and encryption.
Hope this helps
Dave
I've been on the phone talking to 3rd line support at Orange.
Basically, the guy is totally flummoxed!
After trying to talk me through the setup from memory, it seems as though a whole menu of WiFi settings has disappeared from the phone - specifically, the ones that we need! This being the case, he's going to get hold of an M5000 tomorrow and will then bell me back so we can go through the whole process together, both of us using an M5000.
One thought that did occur to me was this: I've only just (like, 3 days ago!) upgraded to the M5000 and I've taken on some kind of free Internet access scheme with my tariff. Could it be that the settings for that (that are sent by Orange in a data SMS) have knackered the WiFi setup?
I'm considering a hard reset with a soft reset before the .CAB files install but will at least wait until tomorrow.
I'll keep you all posted....
I was trying to connect my tytn into my wifi network, the phone detect the network, but appears a invalid IP like 169.254..............and I cant make the phone connect with the correct IP provided by my router. What I have to do to make it connect ???
WiFi Connection
schwaitz said:
I was trying to connect my tytn into my wifi network, the phone detect the network, but appears a invalid IP like 169.254..............and I cant make the phone connect with the correct IP provided by my router. What I have to do to make it connect ???
Click to expand...
Click to collapse
Schwaitz
I'm sure you'll get other suggestions to solve this but I have found that sometimes the regular WM5 connection settings get corrupted and it loses the network WEP key. Rather than spend time trying to fix it I use the following freeware download which does it all for you - i.e resolves conflicting IP addresses etc. Only thing you need to enter is your network key. Hitchhiker is designed for those that like to wander about looking for Unencrypted hotspots to log into but it's just as good at logging into work/home networks. It does remember settings and can be set to log in automatically.
The first time I used it, it came up with some error or other but I think I just did a soft reset and it worked fine.
Hitchhiker v0.4 beta 1
• "Summary: "Hitchhiker" helps you to connect your Pocket PC to the wireless Internet. Simply click "Connect" and it will try all nearby public access points. Hitchhiker will handle all settings for you and perform complicated tests to ensure you can connect" (Their words not mine)
Available from
http://www.freewarepocketpc.net/ppc-download-hitchhiker-v0-4-beta-1.html
Hitchhiker requires that you have installed:
.NET Compact Framework 2.0 Redistributable
This is obtainable from:
http://www.microsoft.com/downloads/...6b-356b-4a2c-857c-e62f50ae9a55&displaylang=en. I suggest you install this first.
Whether you choose this possible solution or not, I find Hitchhiker a quick way to connect to networks without putting the settings in yourself and just a useful tool to have.
Mike
I have been reading this forum and many others all day about the wifi problems people are having but none are like mine so I would like to ask this question, I turn on wifi and it will not find my network or any network around. I have tried to manually put in the ssid and ip address and still it will not connect that way either. I have checked and double checked all my router setting (currently set to open with no wep or anything) I am begining to wonder if the wifi is broken? My second problem I have found it when I change the connection setting to my isp I cannot connect to the internet. Maybe a bad setting, I am not really sure. Any help would be appreciated. Thanks
is your router set to broadcast the ssid? if not then that is the problem. if this option is not enabled then no one can see your router.
as far as connecting via a cell connection, make sure you are using an operator cab. I am sure if you do a simple search you will be able to find a cab that will load all of the proper setting for a cellular internet connection.
who is your provider?
Yes, my router does bradcast the ssid and I have four computers and printers that find it without anyproblems. When i turn on wi-fi the phone doesn't even search for a network the icon shows up but I don't get the arrow that go back on forth to show that it is searching or connecting.
I am also having a problem with my 8525. I do get connected but i cant browse the net. Can someone tell me how to setup a connection from scratch to connect to wifi. Thanks
puremc said:
I am also having a problem with my 8525. I do get connected but i cant browse the net. Can someone tell me how to setup a connection from scratch to connect to wifi. Thanks
Click to expand...
Click to collapse
Search around on the Hermes forum. IE doesn't know to use the WiFi connection when it's available. There's a registry key setting that needs to be changed in order for IE to make use of the WiFi connection rather than going out over your data connection with your carrier.
Hi,
I have an HTC Elfin that has no problem connecting to a home network with WEP encryption. But at work, I cannot connect to the network with WPA-TKIP encryption. My phone just tries to connect for a few seconds and then the status of the access point goes back to "available". I've verified the network pass phrase, as it does work with my co-worker's netbook. What is the problem here?
BTW, I've been reading up on this problem and somebody mentioned the fix of turning on/off the wifi (turn on wifi, connect, turn off wifi and then on again), but it doesn't work for me:
http://forum.xda-developers.com/showthread.php?t=327928
dtran707 said:
Hi,
I have an HTC Elfin that has no problem connecting to a home network with WEP encryption. But at work, I cannot connect to the network with WPA-TKIP encryption. My phone just tries to connect for a few seconds and then the status of the access point goes back to "available". I've verified the network pass phrase, as it does work with my co-worker's netbook. What is the problem here?
BTW, I've been reading up on this problem and somebody mentioned the fix of turning on/off the wifi (turn on wifi, connect, turn off wifi and then on again), but it doesn't work for me:
http://forum.xda-developers.com/showthread.php?t=327928
Click to expand...
Click to collapse
Try to set wifi to best performance instead of best battery first.
Often the problem is also caused by a combination of the router (brand/type) and a Windows based device/computer.
Some things you can try to get a working connection with WPA-PSK enabled:
1. Modify the registry:
\HKLM\Comm\EAP\Extension\25\ValidateServerCert=dword:00000000
2. Modify the network settings:
Settings > Connections (tab) > Wi-Fi > Network Adapters (Tab)
and select "NE2000 Compatible Ethernet Driver" (maybe you have to config a static ip-address).
Thanks for the suggestions. I did all those, except for the static IP since our network admin doesn't provide one. It still doesn't work. One thing I'd like to understand is that in my case, why does the WPA-PSK connection work for the standard Windows environment (laptop/netbook, desktop) but not Windows Mobile? What could be the difference?
I don´t know what ROM are you using, but if it is some of 23XXX Builds, disconnect first the Bluetooth and then connect the Wireless... Should work now...
My ROM is MK_872_05 WWE, from chota_shivaji. It uses WM6.5 CE OS 5.2.21872. Thanks for your suggestion. I will try it out on Monday when I get back to work.
I disconnected the Bluetooth connection and tried again to the WPA-PSK encrypted access point at work and it still doesn't work. Just yesterday at a relative's place, I was able to connect to his router with WPA security. I think there's something different with the one at work which does not work with Winmo devices.
at work do u just have a password or a user/password? are u using certificates?
At work I have a guest username and password that I can use to log in for the WIFI access point. The password changes every week, but I confirmed that I used the latest one. But I don't think there's a certificate needed since my co-worker is able to use his home netbook to log in without anything else except the same username and password.