Related
Hi,
I've recently started using my XDA II, but I'm having a very frustrating problem which I suspect may be a 'feature' of PocketPC 2003 memory management.
When I open up applications and then switch focus away from them (e.g., by using a task switcher like Go, Smallmenu, MagicButton, etc.) they then 'close' themselves in the background.
This is annoying enough when it's just e.g., viewing a file and then have to reopen it and find your place again, but it's seriously irritating when you're in the middle of a task, swap out for a few seconds, and then try to return only to find that PocketExcel has closed, having 'saved' your file with a silly name, meaning you have to open it again. In some apps it even seems to lead to data loss (e.g., if you're half way through entering a new contact, and then do something else, you lose your half-completed entry).
I've got stacks of memory free, so if it's a memory management 'feature' it's being far, far too zealous in reclaiming what it thinks are "unused" resources.
Does anyone else have this problem -- and if so, is there a way to solve it? (please say yes!)
thanks!
Greg.
Hello gregmarsh,
this is a well-known issue with all XDA2 and alike devices (i.e. MDA2, i-Mate etc.) and early ROM's such as 1.03 etc. Check the following link for more info on this issue with a few suggestions how to (at least partialy) get rid off it:
http://ppcw.net/mobile2003.php?itemid=1645
The good news is that the number of running processes have been reduced in ROM 1.60.
PavelR.
PavelR,
Thanks for your help on this point -- I will try some of those suggestions.
I hope that O2 releases a new supported version of the ROM soon (I don't quite have the guts to flash this myself just in case all hell breaks loose...!)
cheers,
Greg.
Since this has always been a "hot topic" on this forum, I have a simple question for all you Magician users.
What are the top 3 reasons you want it / don't want it for Magician.
Here's mine to start you off:
1. I don't want to be left behind
2. New Mobile 5 looks better
3. I want to be able to use charts in Pocket Excel
Let's avoid the WM5 upgrade saga again. We know we won't get an upgrade for Magician. Well, not until May at any rate. (!)
OK - Here's my why not:
1. WM2003SE is stable
2. It already does what I want
3. I can wait till I'm due for an upgrade from my network.
No WM5,
1. 2003 is stable
2. the screen is too small for specials
3. I can wait for a new provider offer (WM5 should be stable by then)
Why not WM5:
1. It's a lot slower, especially at starting programs
2. Not all software is yet WM5 compatible.
3. You have to buy the latest versions of many of your software to have it WM5 compatible. Most updates are not for free.
4. The Magician just doesn't have enough ROM to run WM5 properly
I can't think of any compelling reasons to switch to WM5 that are of a positive significance (btw, I can't count to 3):
-CF 2 works on both.
-Security signing is a pain in the bottom.
-It's slower.
-Ok it has some useful networking functions, but it loses wifi Activesyncing. WTF? Not to mention ActiveSync.
-WM5 interface, perhaps the most potentially useful idea with the softkeys, but inconsistent execution. And I have some ideas about bringing some of the benefits to Wm2003.
-I have the Magician and the Universal. I was just telling my better half about the Universal users' experience with dropping phone calls being able to answer. It's a beautiful device, but once again, what were they on?
Ok, too many others, I'm starting to http://www.ladyofthecake.com/mel/space/images/alien.jpg]sweat and convulse[/url]. Better stop for now.
V
With a device like the Magician where the size is more phone-ish than pda-ish, I'd be inclined to say that most people use it primarily is a mobile phone with the additional functionality of a PDA, MP3 player, etc.
I upgraded to the HTC Prophet just because I want to have the latest. But now that I had it for over 2 to 3 weeks I can say that I would never switch back to WM2003. Single-handed operation with WM5 is very easy, intuitive and practical to say the least.
And when the battery is really low, like less than 30%, I feel safer listenening to the last few MP3s, knowing that I will not lose anything when the battery goes flat.
With regards to performance, I find it suprising how people find loading prorams on Wm5 noticeably slower than WM2003. I was using my old magician yesterday and the performance is just about the same. Th onlt thing I found slower on WM5 is changing the SIP.
Plus, WM5 can do without 3rd party programs like Caller Id, Photo Contacts, etc. cause they are all integrated with the OS. For example, there were times when a picture that I assign to a contact won't show up during a call with the Magician. This never happened to me since I started using WM5. And since contact pictures are synchronised with Outlook I don't need to re-assign them again after a hard-reset.
Finally regarding stability, yes there is software that is not compatible with WM5 yet, but most of the best software is already compatible. I'm using the following software and never had to reset my PPC:
SPB Diary
Resco File Exporer 5
psShutXp
Hitchhiker
MDict
TKCreator
MS Voice Command
and a couple of games
Personally, I think it's quite a stable platform. The only thing that annoys me is that sometimes Wm5 (or the Prophet) loses the storage card after being on standby, and the media stored on it is not always immediately available. You'd have to wait those 3 sec sometimes. But this will hopefully be fixed in the next ROM update. If not, I'm still happy with the overall package
Just my 2cents!
Meh.
Hokay. Regarding WM5... I have never come across an OS that actually requires a file that YOU OWN signed by an EXTERNAL AUTHORITY instead of yourself, and that purposefully ignoring this warning to install said files doesn't necessarily mean it won't be blocked when you try to run it (goodbye backward compat). I thought this technology was strictly for web only.
Stick to WM2003, at least it has the decency to trust its own owner. -.-'
Re: Meh.
Ultimate Chicken said:
Hokay. Regarding WM5... I have never come across an OS that actually requires a file that YOU OWN signed by an EXTERNAL AUTHORITY instead of yourself, and that purposefully ignoring this warning to install said files doesn't necessarily mean it won't be blocked when you try to run it (goodbye backward compat). I thought this technology was strictly for web only. '
Click to expand...
Click to collapse
I dont understand - what situation is this coming up?
Well, I have some games on my O2 Xda mini. I tried transferring them to my sister's new Atom.
Message I got from installing was the generic 'this program is not signed by a trusted source'. I ignored it and installed anyway.
But when I tried to run it, guess what? 'Program cannot be run because it is either not signed with a trusted certificate or some files are missing. Please reinstall...'. This was from an installer works perfectly on my Mini.
Did some research, Win Mobile 5.0 will also generate this error when you attempt to execute something with a DOS parameter at the back. It also blocks stuff that do not require installation; Scummvm 8.0 was halted with the same error message. I know the latest Windows OS's have File Execution Prevention but it was never as anal and obnoxious as to go 'I do not want to let it run. So there. Nyah.'
Seeking the Caller ID (Photo Contacts)
kta said:
Plus, WM5 can do without 3rd party programs like Caller Id, Photo Contacts, etc. cause they are all integrated with the OS. For example, there were times when a picture that I assign to a contact won't show up during a call with the Magician.
Just my 2cents!
Click to expand...
Click to collapse
When I was using the I-Mate Jam (Magician) I really liked the "Photo Contacts" program they had, which was actually "Caller ID 1.6" allegedly from IA Styles of late. But it cannot seem to be found anywhere. I have looked from freeware sites to pirate sites and cannot find it. I downloaded and used "Photo Contacts 4.1" for a pretty penny, but it did not allow for animated .gif contact images. I REALLY liked that. Does anyone know where this program can be found? Can any of you remove and distribute it from your phone or from a ROM?
papakeithjenkins said:
When I was using the I-Mate Jam (Magician) I really liked the "Photo Contacts" program they had, which was actually "Caller ID 1.6" allegedly from IA Styles of late. But it cannot seem to be found anywhere. I have looked from freeware sites to pirate sites and cannot find it. I downloaded and used "Photo Contacts 4.1" for a pretty penny, but it did not allow for animated .gif contact images. I REALLY liked that. Does anyone know where this program can be found? Can any of you remove and distribute it from your phone or from a ROM?
Click to expand...
Click to collapse
Why don't you download it from the xdadevs FTP server? There are the ExtRoms for Magician with the cab files.
But be careful, you seem to run a WM5 device, it might not run (and force you to hard reset)
Actually WM6
In reality I have upgraded my system to WM6 Pro now and I will let you all know how loading this cab on my Hermes does with WM6. I loved this program when it was running on my Magician (which I gave away to my friend/biz partner) and have tried Photo Contacts Pro 4.yada.yada, and was not happy with THAT. Even got a refund.
Thanks a bunch Dude
Only took a minute
I found it right where you said I would and downloaded it and installed it and soft reset and . . . when I tried to asign a photo it got a headache and gave me a message about being unable to use the program for somereason.
I unistalled it from the system and did another soft reset and while I don't have menu access to assign photos, I can open the edit screen on a contact and assign a photo there.
Maybe I should reload the program again and try accessing it from the Edit screen too? We shall see.
Otherwise, I think I shall attempt installing it on my wife's Blue Angel.
littld said:
We know we won't get an upgrade for Magician. Well, not until May at any rate. (!)
Click to expand...
Click to collapse
what makes you think we will get an upgrade then ???
sorry n00b magician owner here only had it for a week
any tips?
Greatest 'Photo Contacts' ever
I installed the photo contacts on my wifes Blue Angel - WM2003 - and it was excellent - I only wish someone could make the same program work on my Hermes with WM6. It has the unique ability to use animated .gif images and I LOVE THAT!!!
If anyone could pull this one off I would be overjoyed. I have attached the version with which I am familiar. And if you can't make it work for WM6 - or WM5 - it already works on WM2003 really well. I have loaded it on a couple of Wallabies, a Magician with a new ROM and a Blue Angel - all with great joy in its application.
TIA,
littld said:
Let's avoid the WM5 upgrade saga again. We know we won't get an upgrade for Magician. Well, not until May at any rate. (!)
Click to expand...
Click to collapse
what's happening in may!!!!!
why dont we have it yet?
PharaohSam said:
what's happening in may!!!!!
why dont we have it yet?
Click to expand...
Click to collapse
As we can clearly see and hear from this video, there will be rain in may!
http://www.youtube.com/watch?v=UKKCmNVISwQ
"Rain in May, wipes your worries away"...
Finnish Aali Alikoski, Academic Developer Evangelist of Microsoft Finland, has just released a highly useful application, SMS Notifier, along with its source code.
The application offers some really nice and, up to now, to my knowledge, on the Pocket PC Phone Edition platform, unprecedenced functionality: it waits for unanswered incoming calls and, depending on the configuration settings, it either sends an SMS message to the caller (with configurable contents), possibly containing also the end time of current appointment (this is also configurable) or adds an item to the system-level Windows Mobile calendar (containing the caller info).
The latter functionality is nothing new – you can check the caller's identity and the call date/time in any low-end mobile phone. The former – that is, the SMS feedback –, however, is really long-awaited!
Downloading and Installation
You can download the application here. Transfer the CAB file to your PDA and execute it there.
If, after installing and upon starting SMS Notifier, you're presented this error message, make sure you download and install .NET CF 2.0 from Microsoft. Make sure you install it in the main memory. Also note that, as the application heavily relies on the new, connectivity/database-related libraries of .NET CF2, it's not very easy to port it to run under the earlier Compact Framework library. (For CAB lovers, you will only need c:\Program Files\ Microsoft.NET\SDK\CompactFramework\ v2.0\WindowsCE\wce500\armv4i\NETCFv2.wm.armv4i.cab ; you can also download it from here (to avoid having to download the 24 Mbyte-long MSI installer).
Configuration
On the main set-up screen, there're some checkboxes in AND relationship. The first one, Send SMS to unanswered callers, instructs the application to send an SMS to everybody that tries to call you but his or her calls remain unanswered. Using (not disabling) the second two checkboxes, however, you may make the application not send a SMS to anyone that calls you, just to the ones that call you during an active/busy appointment.
The checkbox/text input area at the bottom makes it possible to report the end of the current appointment so that he or she can know when you are reachable again.
The Calendar tab contains only one checbox, which instructs the application to enter all the incoming calls into Calendar.
Note that the configuration settings are not correctly saved/restored, as the author also points out.
Usage
To use the application, just start and configure it to your liking. Do not click the Quit button – then, it won't send your callers any SMS. Just let it run. You can, of course, suspend the PDA while you do so and also minimize the application. This also means you can safely start it from \Windows\Startup (just like the other highly recommended application, PMRecorder – please see this article on it if interested) – if it's running in the background, it'll safely catch all unanswered calls.
Other stuff
I also recommend the author's blog here. Don't be taken aback of some of the material's being in Finnish: there's nothing really interesting in them for non-Finns (the Finnish blog posts are only about local, Finnish meetings, conferences). Unfortunately, some of the other Finnish .NET bloggers (see the links in the lower left of the page) post exclusively in Finnish, even highly technical stuff that would be interesting for non-Finnish speakers too. (Feel free to ask me in my blog for a public translation for some of them if really interested.)
thanx man .. jus tried it . this application actually works .rockinnn
I can't seem to be able to install the .net Framework 2.o on my new T-Mobile MDA - USA (Wizard)
I get the same error from .cab install or activesynch install:
"Installation error. Stop all applications and processes, maximize all available storage space, and run installation again. Support info:4"
Any suggestions?
oops
PhoneGuy said:
I can't seem to be able to install the .net Framework 2.o on my new T-Mobile MDA - USA (Wizard)
I get the same error from .cab install or activesynch install:
"Installation error. Stop all applications and processes, maximize all available storage space, and run installation again. Support info:4"
Any suggestions?
Click to expand...
Click to collapse
Did you try to install it in the main storage or the storage card? Only install it in the main storage.
Yeah, the options were "Device" or "Storage Card".
I tried Devicce but no luck...
PhoneGuy said:
Yeah, the options were "Device" or "Storage Card".
I tried Devicce but no luck...
Click to expand...
Click to collapse
I've encountered the same when I first tried to install it on a storage card. Then, subsequent installs to the main memory didn't succeed either. A hard reset helped.
I have installed it and it seems to work well. My only concern is that it seems to use the notification application of the phone rather than the call list of the phone. The reason I say this is because it puts a calendar entry in when I miss a call then adds another entry when I check the notification of missed calls.
is this what is supposed to happen? would it send 2 text messages in this case (when the call comes in and when I check the notification that the call did come in)?
thanks,
Edwin
also, it seems if I am on the phone when I miss a call it uses the name of the person I was on the phone with and not the person I missed.
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
ethorn said:
is this what is supposed to happen? would it send 2 text messages in this case (when the call comes in and when I check the notification that the call did come in)?
Click to expand...
Click to collapse
That's what happens for me... I stopped using it because of the duplicated sms's...
meschle said:
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
Click to expand...
Click to collapse
Tried it. Keep getting "Cound not find resource assembly" error.
Strange works sweet for me.
this is the link I used
http://www.freewareppc.com/communication/callassistant.shtml
meschle said:
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
Click to expand...
Click to collapse
after using the Ruttensoft on my Qtek, i can no longer creat SMS, when I click on new, only a while screen appear, cannot input both phone number and Text.... did anyone meet the same ???
meschle said:
Strange works sweet for me.
this is the link I used
http://www.freewareppc.com/communication/callassistant.shtml
Click to expand...
Click to collapse
No it didn't... you didn't use this program. we are trying to give feedback to the author of this program which has so much more potential than the limited software you used.
No sms works for me even when activated. my qtek rom is 1.6.7.1 maybe that's the diff. Sorry ethorn could start a new thread if you like but may help some people if the other prog don't work for them.
Hi
I have a XDA 2i & a XDA Mini S and use a program called Do Not Disturb by Jguisoft, a very small footprint and easily configurable
no I am all for putting ideas of other products, but the way you worded it sounded like this program that Menneisyys worked on worked on your phone and that the version of his program you used was at another link.... my problem is that neither are true. Software Guru did things right and just introduced another alternative.
thanks guys
Software Guru said:
Hi
I have a XDA 2i & a XDA Mini S and use a program called Do Not Disturb by Jguisoft, a very small footprint and easily configurable
Click to expand...
Click to collapse
Can you provide a link? Did a google and no results found.
Cannot download the SMSNotifierSetup cab
Can someone please post this as i cannot seem to download it.
thanks
I don't know where else to post this....I found this while looking for an alternative to the SPV Developers CellTracker app. It's an app called NiceTrack...the screenshots tell the rest of the story:
http://www.nicecuppa.com/nicetrack.asp
Background info: http://www.ascendingangels.com/nicecuppa.com/nicetrack.asp?story=1
Screenshots: http://www.ascendingangels.com/nicecuppa.com/nicetrack.asp?story=2
Download: http://www.ascendingangels.com/nicecuppa.com/nicetrack.asp?story=3 (Version 1.2)
The source code for that app can also be downloaded from the Background Info link.
The SPV Developers CellTracker app (Beta version only, hasn't been updated since December) for PocketPCs is located at the way bottom of the page:
http://www.thelogster.34sp.com/celltracker/
NiceTrack updates the tower changes in real-time whereas CellTracker does not. NiceTrack also shows the dbm signal strength on a cool chart and it also includes a logging function that allows you to rename the cells your phone has connected to while the app is active.
Signal strength chart: http://www.ascendingangels.com/nicecuppa.com/images/nicetrack/main-page.gif
Here are a couple hints based on my experience so far:
1) In order to fully save the renamed/logged cell sites, you must first tap Save next to where you renamed the cell site. Then you must also tap Options/Menu --> Save (extreme lower left) to save all changes since the app was launched.
2) Use Menu --> Exit to completely close the app.
I have tested this for use on my MDA II w/Windows Mobile 2003. I don't know if the app is compatible with WM5 PPCs or regular Windows Mobile smartphones.
Enjoy
Thanks for posting.
This software has been discussed before, and it is great:
http://forum.xda-developers.com/viewtopic.php?t=3347&highlight=nicetrack
However, I believe people are having difficulty converting it to WM5 (when I last checked). But great stuff either way.
V
Hi there,
Sharpstuff (NiceTrack author) here..
I've just bought a T-Mobile MDA Vario and have managed to get it working on that ( WM2005 )
The problem was that in the older phones the GSM modem was on COM2 and on my Vario it's now COM9. I've made the Com port configurable now, but it's still not 100%.
You can download it from my site www.nicecuppa.net
Let me know how y'all get on.
Cheers
-sharpstuff
Good stuff sharpstuff Wish I had a gps!
V
sharpstuff said:
Hi there,
Sharpstuff (NiceTrack author) here..
I've just bought a T-Mobile MDA Vario and have managed to get it working on that ( WM2005 )
The problem was that in the older phones the GSM modem was on COM2 and on my Vario it's now COM9. I've made the Com port configurable now, but it's still not 100%.
You can download it from my site www.nicecuppa.net
Let me know how y'all get on.
Cheers
-sharpstuff
Click to expand...
Click to collapse
Sharpstuff, you have an excellent app here. I had to search for a bit to find it but in the end, I'm quite glad to have it . I also like the pun you have for your site...it's quite distinctive since even as a German-American, I know when someone says "cuppa", they normally mean the cup of tea .
Keep up the good work and thanks for taking the time to develop such a great and invaluable app .
oooh.. *bookmark*
Do you have a regular Donate button somewhere? I see the shop, but I'd rather just get X amount straight to you, and not have to be awoken by some crazy delivery guy at 8am for a mug
Thanks for the kind thought...
But, I enjoy doing this stuff, so just click my google ads and I'm happy!
;-)
Got this to work on my 8125, almost... Clicking on 'add' under events causes it to crash with the following error:
NiceTrack.exe
NullReferenceException
Application::Run+0xf
MainForm::Main+0xa
....bummer - so close!
You need to select an event type eg. "Flash backlight" then click "add"..
Needs some validation there.. Plus, the events side of things isn't very useful at the moment, I need to implement some more event types.
Cheers
I installed it on my qtek9100 but it doesn't find a GSM-modem at all.
Also a Qtek9100, EN - found it on COM9 just fine
What would be really neat would be an event "Show Picture". That way it would be easy to make a make-shift map tracking thing. Simply grab a picture of the map off the internet, plunge a big dot on the map where you got the cell, save as image, and have that image displayed when entering that cell %) GIF files on the storage card, shouldn't take up too much space
Alternatively a full-fledged mapping thing could be developed, but that's a lot more work *nod*
@sharpstuff hey I installed it on my XDA EXEC, but when it scans for com and reaches com9 it just freezes...any ideas?
Hi there,
I'm having some problems with the detection code, and general functionality on WM5.
I am looking into it and will post a new version up ASAP, sorry for the problems..
stop being sorry and add that donate button *keeps clicking google ads once a day but hopes google won't start ignoring his IP address for excessive clicking...*
N!co said:
I installed it on my qtek9100 but it doesn't find a GSM-modem at all.
Click to expand...
Click to collapse
After a soft reset its working fine on COM9. Nice app.!
sharpstuff said:
Hi there,
I'm having some problems with the detection code, and general functionality on WM5.
I am looking into it and will post a new version up ASAP, sorry for the problems..
Click to expand...
Click to collapse
So is Release 1.3b a partial fix for WM5 users? I installed it on my MDA II and it detects my modem on COM2 without any problems. Both 1.2 and 1.3 seem to work on WM2003 PPCs.
http://www.nicecuppa.net/
http://www.nicecuppa.com/download/NiceTrack_Release_1_3.zip
TIA
Yep, it's an intermediate release. Basically, it reminds the user on startup to set the Com port in settings
I'm working on v1.4 at present, this has more error checking on the GSM code, and multi-threaded com port detection so the whole app doesn't hang
For what it's worth - it seems to randomly lock up on me - requires an 'end task'. Sometimes when this happens, and I try to fire it back up again, I just get an empty message box dialog; no title, just the close button.
ZeBoxx said:
For what it's worth - it seems to randomly lock up on me - requires an 'end task'. Sometimes when this happens, and I try to fire it back up again, I just get an empty message box dialog; no title, just the close button.
Click to expand...
Click to collapse
I get that messagebox at random even after I closed the app and its not in the list of running programs. Strange...
Hi,
I purchased the latest version of AntonTomov's PocketMechanic via Handango and received the registration key immediately after finished purchase procedure.
Installation on my TyTN seemed to work out first (the program accepted the key with a message box and a sound).
But only moments later a message box popped up, telling me I use a pirated version and should turn to the manufacturer, which I did (also mailed Handango).
Meanwhile tried to install PM several times (always removing all traces from both PC and TyTn incl. Registry and rebooted) - to no avail.
Meanwhile received a new serial, but same story again: first accepted and immediately afterwards aborted with Piracy message.
A new complaint mail is on ist way.
Meanwhile I'm asking here if anybody had similar problems in getting the Pocket Mechanics to work on a TyTN.
Appreciating feedback and will let te community know how it worked out for me.
I would not use or buy Tomov's products out of principal.
Found a lot of threads about earlier version doing a hard reset without asking, when inputted a "pirated" serial. So be glad it only shows a box nowdays.
While software piracy is not a good thing, at least for people developing propietary software. Tomov has used a bit too drastic measures to fight
back.
jeezus said:
I would not use or buy Tomov's products out of principal.
Found a lot of threads about earlier version doing a hard reset without asking, when inputted a "pirated" serial. So be glad it only shows a box nowdays.
While software piracy is not a good thing, at least for people developing propietary software. Tomov has used a bit too drastic measures to fight
back.
Click to expand...
Click to collapse
This does not make me too comfortable :-(
I also read a few note about that on the net and a reply by Tomov, complaining that this is not true and only a campaign to cut him off his revenues.
Well, I do not know what to believe, however this uncertainty is also not too comfortable...
Well the Pocket Mechanic way of uses some hardware dependent functions and - if you dare to take use of such - you have to either be very careful and also prepared that they might not work on untested and after all very new (such as the TyTN) devices.
I was prepared for all of that but not that I receive a piracy mail (which somewhat alsmost accuses you of being a software pirate and telling you to mail to [email protected]) when I purchased the software (which I can also prove).
Maybe he uses some hardware related mechanism to check eligibility of the serial and as he hasn't tested yet the TyTN (which he admits) this software won't allow being registered at all. I do not know.
But isn't such a meachanism pure over-kill ?
Actually something like that must be going on as I receive this pop up also after a new install and having purged all remnants from the PC, the PDA and the registry.
If I'd be trying out serials just at random, would anyone think that I'll millions of times do that complete procedure just to find any working key at the end of my life maybe ???
(And if I'd be a professional hacker I'd disassemble the code and be able to work around even these barriers.)
So, applying over-kill measures like that only brings problems to decent users, risking to run into problems when using special configurations or ne devices.
+++
Apart from that I must say that Tomov's applications seem well coded and also graphically very nice (one wonders how graphically nice application you can program for PDAs; shame upon Microsoft for their pre-installed poor applications !!!).
Also I see no real alternatives for some functionality he provided within one software, that's why I purchased the PM.
Finally again my question:
Has anyone encountered the same problems with the PM on a HTC TyTN ?
(btw: Thanks "jeezus" for your feedback.)
Might I inquire which funktionality you need?
Maybe we can find an alternative solution.