Hi I was trying to upgrade on http://lumpistefan.dyndns.org/...and it worked fine....but when I unzipped it....it was 31,234,454kb's and that wont fit on my phone....I have upgraded before and i didnt have this problem....please helppppppp!!!!
Why shouldn´t it fit?
Do you get any Error Messages?
Stefan
Related
I upgraded my pda with t mobile 4.01 beta rom then i was trying to get rid of it and upgrade to ATT latest rom. but it was not letting me to GET rid of it. SO i was trying many thing after doing them i saw that my pda`s phone feature is gone. then i installed RSU "PROGRAM B" SOURCEO2.com that is 4.0 something. I HAVE TRIED MANY THING BUT NO USE I HAVE ALSO DOWNGRADED TO WIN CD 2002
may be the att RSU will solve the problem. please tell me where to download it from.
the mobile was running on 900/1800
NOW THE PDA IS NOT DETECTING ANY SIGNALS.
AND I FEEL LIKE CRYING B/C IT WAS MY BROTHERS WHO GAVE IT TO ME FOR UPGRADING
Looks like you have the same Problem as i have. Check if your GSM-Module is still doing: You have to get into the Bootloader and check if it says "GSM OK" (then you are a lucky owner) or if it says "GSM Error" (then you´ve got the same problem as I´ve got). If it is the second case: Try this one: http://forum.xda-developers.com/viewtopic.php?t=1182&highlight=solved+gsm+error
Or this one: http://forum.xda-developers.com/viewtopic.php?t=4123&highlight=screen+1
But i need to say that these tips haven´t helped me out of this Prob. I hope it will help you!
So long...
no error any where GSM OK
NO HANGS every thing is fine.
Where can i down load ATT .20 RSU
I downloaded the rsu for ATT from yorch.net and now its getting signals.
Well this is the first time I've been unlucky for once. I've just finished cooking up some Rom for my ATT Siemens SX56. I was using the WM2003SE upgrading from PPC2002. I have a feeling that I did something wrong here and I'm guessing that I can't upgrade from PPC2002 and only WM2003? Well I'm not quite sure since I'm new to this. I successfully always upgraded the rom until now. After powering up, it started hanging at the startup logo with the version of the radio stack I think.
G1.3.3
UA.33
3.04
I've tried using ActiveSync and of course it didn't work. The cradle or A.S. did not recognize the device. Tried using XDATool, none. Is there anyway I could go around the ActiveSync?
Use sd card method for flashing.
tried that and it didn't work. I tried almost any methods out there. I tired upgrading from the original ATT Rom PPC2002 to the Special Edition 1.2 Rom and it still didnt work. What's odd is... I can't get my WM2003 to work anymore! When I first started upgrading the rom, I upgraded using SE 1.2, then downgrade to the original ATT rom back to the WM2003 which actually worked fine until I got piss at the radio stack and downgrade back to the PPC2002 but once I tried upgrading to WM2003SE, it didnt work at all which brought me to downgrade back to PPC2002 again and tried upgrading to WM2003 (ATT Version) which still didn't worked. I've tried upgrading the radio stack 6.24 and 6.25 and radio stack that would be compatible for the SX56 still didnt work. Even downgrading my bootloader from 5.22 to 5.15, it still didn't work. It's really odd... Can ANYONE help me?
I have similar problem, I have Qtek 1010 and I can put original rom on only (2002). I have had 2003 on there before and it worked fine but I have tried everything and nothing seems to work, all the 2003 and 2003se rom will not go past the boot screen.
Is your phone working at all.
My phone is perfectly fine, I'm just trying anyway to resolve that booting problem and so far, I'm getting no good results out of it... This is totally driving me nuts!
I tried neally every rom and I can't get any to work on my Qtek except the original 2002 Carrier device Rom...... I don't understand why we could both upgrade before with no worries and now it just will not work....
PLEASE HELP SOMEONE.....
THANKS
Well, so far I tried another rom, an older one and I still didn't get it to work... SD Flashing... The normal method with ActiveSys, it still didn't work. There has to be a reason to why this isn't working. Does ANYONE out there know whats going on here?!
Hello everyone! I really, really hope you can help me!
I have a T-Mobile MDA Compact. I was upgrading the ROM version tonight to the latest version (blackberry version) My MDA would appear to have crashed mid-way through the upgrade. The upgrade software told me to reset the device and try the upgrade again. So I reset the device.. all I get on the screen is "USB V1" and when I select the new rom file I get an error which says "Error 120: Country ID Error N-N-38-38-38" The ROM image that you are trying to use is not designed to work on your device. Please check the vender Website and download the correct ROM update.
This is the correct ROM update. I'm using a T-Mobile branded handset the update is definitely a T-Mobile update. Can anyone tell me what I'm doing wrong? is there another update or even a completely new ROM version I can use to get my phone working again? It's the only phone I've got and I urgently need it for work
Thanks, Tom :?
OK so now it loads up and gets as far as 'loading config txt' and then it just sits there. Again I try the rom update but I'm told ROM is wrong for my device.
Hi Tom,
Use maupgradenoid.exe or a simular named program from the ftp over here. Maybe you have to run it twice to bypass your error. Use the program instead of the, probably named maupgrade, .exe which you get when you unzip your shipped rom. No need to zip it again, just unzip into an empty folder put the maupgradenoid.exe in the same folder. Put your device in bootloader (camera & power & soft-reset until it reads serial v1) connect it to usb, now it reads usb v1 & run this noid.exe.
Good luck, M
Ps. sometimes you need to add or change a line in config.txt, you can find that in one of the latest posts by parklife in
the thread about the official TMO 1.13 rom
TomFoolery said:
Hello everyone! I really, really hope you can help me!
I have a T-Mobile MDA Compact. I was upgrading the ROM version tonight to the latest version (blackberry version) My MDA would appear to have crashed mid-way through the upgrade. The upgrade software told me to reset the device and try the upgrade again. So I reset the device.. all I get on the screen is "USB V1" and when I select the new rom file I get an error which says "Error 120: Country ID Error N-N-38-38-38" The ROM image that you are trying to use is not designed to work on your device. Please check the vender Website and download the correct ROM update.
This is the correct ROM update. I'm using a T-Mobile branded handset the update is definitely a T-Mobile update. Can anyone tell me what I'm doing wrong? is there another update or even a completely new ROM version I can use to get my phone working again? It's the only phone I've got and I urgently need it for work
Thanks, Tom :?
Click to expand...
Click to collapse
Incase you upgraded to a new T-Mobile ROM, i think you can take it to the T-Mobile store for fixing.
Perfect!! That seems to have worked!! Thank you!!!
THANKS
I had the same problem and I follow your instruction and it'goes perfectly fine.... My phone is now alive again
THANKSSSSSSSSS
Hi everyone new here and im really hoping to get some help here
I purchased this of ebay as i got the wife one hers being imate kjam
i managed to unlock and update rom to wma6 no probs with help from
this forum.
So i brought another but this had g4 chip so hardslp needed etc etc
all went well unlocked etc etc but lost sound out going and incoming so thought i would flash a different rom the t-mobile one RUU_Prodigy_1060204_105_11210_TMO_UK_Ship it wouldnt take it wrong update tool so exracted the nk.nbf and used RUU MUN update tool all went well flashed ok restarted but got stuck at start screen left it for 5 mins nothing so did hard reset same again stuck did it second time it wont come on at all now
Ha Ha ive bricked it
Can anyone help me restore it please
Hello
Guys im really new on this.....i have T-Mobile Wing...and i recently updated my ROM to 6.5 but i dont really like it so then i decide to downgrade it back to 6...but when i was downgrading my ROM back to 6 (downloaded from T-Mobile website) accidentally the cable went unplugged from my Wing...during the Downgrading process....after that now when i am trying to downgrade it again.. im having problem that>>>till the last step of downgrading everything goes correct but when the process start and when progress reach to 1% my Wing restart itself and my goes in OS(which work fine) and>>ya i tried different 6.5 ROMS i got successful in installing but not in T-Mobile Original ROM<<....can anyone tell me what happen to my phone and how i can solve my problem...... after restarting i got error in T-Mobile ROM >>(ERROR [260] : Connection)......plzzzzzzzzzzz need ur help im really worried plzzzzzzzzz guys help me out......pictures are given below...
thankx alot for ur help.....
Hmn. I would also like some help with this too, as I recently came into a wing that had been 'upgraded' to one of the ROMs from wingster before I received it. I was able to hard reset it thru the settings but when I go to install the 'official' T-Mobile ROM over the hard reset it does the same thing: (ERROR [260] : Connection) and I have tried to do this again after a PC reboot, no luck.
Please and Thanks.
After digging around a bit more, I hope this helps:
Check out this thread: http://forum.xda-developers.com/showthread.php?t=364543
Click to expand...
Click to collapse
thankx but again problem....
bro thankx alot for u r reply i just extract T-Mobile original ROM (.exe) file and just copy the ROM files and i install it through FLASH CENTER which works fine....my problem is sloved ...Now again im having new problem which is when i lock my phone through the power button....i m unable to recieve any call or any message.....but im able to recieve call n messages when my phone is unlock....i think when i lock my phone it disable all the connection such as (WIFI,Bluetooth and including My phone Connection and etc....)so can u help me out how can i disable this thing or can u help me out what exactly problem im having....thankx in advance..