Remove old microsoft bluetooth icon with widcomm stack? - Windows Mobile Development and Hacking General

Before this site was hacked I have read a post about removing the old microsoft stack icon after putting the widcomm stack on it?
I can't find it anymore!
Does somebody knows how to do this without any bugs ?
Best regards,
Dide

You must delete a reg file.
Local_machine/services/BTicon.
Delete the BTicon reg. file. then soft reset

Doesn’t this solution slow down the performance of the unit after the soft reset?
I’ve read this in an older post.
I remember something about an extra solution for this one.
Br,
Dide

I can't really tell you this, I personaly used the method posted below.

if you afraid some trouble coz of delete this registry, you can add : mark before BTicon like this
;BTicon
this registry is not force any more. and try to use problem will be happened or not.
if you wish to make it back to default, you can delete this ; again. it registry will come back.

Original BTicon Registry Entries
Anyone who has the original BTicon values or an exported key? I need to restore my MS BT icon.. Thanks!

original reg
REGEDIT4
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"="BTIcon_Dll.dll"
"Order"=dword:00000008
"Prefix"="APP"
"Index"=dword:00000003
"Context"=dword:00000001
"DisplayName"="Bluetooth Icon"
"Description"="Bluetooth Icon Service"
"Keep"=dword:00000001

Re: original reg
Asukal said:
REGEDIT4
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"="BTIcon_Dll.dll"
"Order"=dword:00000008
"Prefix"="APP"
"Index"=dword:00000003
"Context"=dword:00000001
"DisplayName"="Bluetooth Icon"
"Description"="Bluetooth Icon Service"
"Keep"=dword:00000001
Click to expand...
Click to collapse
could you post the .reg file instead? thanks!

regstry
u can copy/past this regstry to editor,then rename its expasion to "reg" instead of txt. it became reg file. sorry im out now and posting with iis, difficult to upload it. pls try it

Related

Change T-Mobile Dialer skin

I have a T-Mobile Vario that have a dialer T-Mobile skin. Can I change this skin to default WM5 dialer (blue)?
Thanks
Yep I want to do this as well the T mobile dialer skin is well poo realy had no probs on my XDA II
Try searching 'dialer skin' in search.
Thats how I found WM5 dialer skin for my JAM.
Good luck 8)
Tried that with No luck
1. Using a registry editor - edit the following registry entry: 'HKEY_LOCAL_MACHINE\Security\Phone\Skin'.
2. The 'Enabled' DWORD value can be '1' for the T-Mobile skin or '0' for the default WM5 skin. You will probably find a '1' in your t-mobile device and '0' if you have an I-Mate or QTEK
3. Change the value of the above so that that you get: HKEY_LOCAL_MACHINE\Security\Phone\Skin\Enabled = 0'
4. Soft Reset and you should see the defaul WM5 dialer.
5. In the background of the dialer you will probably see a small faded T-Mobile logo. If this irritates you - you can get rid of it too by:
6. Download the following file:
http://members.home.nl/pieterstroink/GoT_startpost/K-JAM/carrierlogo.gif
carrierlogo.gif (right click, save as)
7. Do not change the name of the file, it must remain carrierlogo(.gif)
8. Find the original carrierlogo.gif file on your MDA Vario - it should be in the windows directory. Overwrite this file with the file that you have just downloaded.
9. Soft reset
10 Done
T-Mobile dialer OUT
Thanks Lisa... work!
Thanks for this...
Terran
Smartdialler??
Hello,
Now, I haven't SmartDialer/interllidialer!!!
I don't know if was after this change or after delete Extended_ROM2 files; but I have .CAB files and not any smartdialer CAB (only smart dialer enabler)!
Can somebody help? Or send this CAB file?
Thanks
The blank carrier logo worked, but the DWORD value still keeps resetting itself to "1" again after a soft reset...
What am I doing wrong?
[EDIT] Oh well..... somehow the phonepad changed and when I look up my registry the value now is (and stays) at "0".
Don't ask me how or what.... but it's fine now. :wink:
Last question: does anyone know how to erase/change the T-Mobile boot screen (when you do a soft reset)?
THNX.
SmartDialer
Well... it is true... if change registry value 1 to 0 put WM5 skin, but SmartDialer don't work.
If change again 0 to 1 smartdialer work (and dialer too) but with T-Mobile skin... that is not beauty!
Somebody know how put Dialer and SmartDialer WM5 skins at T-Mobile Vario?
Thanks
Re: SmartDialer
arp said:
Well... it is true... if change registry value 1 to 0 put WM5 skin, but SmartDialer don't work.
If change again 0 to 1 smartdialer work (and dialer too) but with T-Mobile skin... that is not beauty!
Somebody know how put Dialer and SmartDialer WM5 skins at T-Mobile Vario?
Thanks
Click to expand...
Click to collapse
I second that,.
Anyone?
Can't overwrite carrierlogo.gif
I can change to dialer skin fine with the registry key, but I can't overwrite the T-mobile carrierlogo.gif - it is always write-protected. How can I make it stop being read-only, so I don't get 'access denied' when attempting rename/delete?
Maybe put phone at Flight mode that off communications...
hi lisa just looking at your post. how do you edit the registry. or how do you get to the hkey menu
many thanks
Well I tried changing the value DWORD value from 1 to 0 but I just get a access denied message, any help?
anyone??????
Re: Can't overwrite carrierlogo.gif
Izzard-UK said:
I can change to dialer skin fine with the registry key, but I can't overwrite the T-mobile carrierlogo.gif - it is always write-protected. How can I make it stop being read-only, so I don't get 'access denied' when attempting rename/delete?
Click to expand...
Click to collapse
I have the same problem, I searched the intire forum but couldn´t get a solution for this problem.
I can´t change my logo neither, I also get the message "acces denied or write protect"
can someone help....
grz. Antonie
I had the same problem when copying files from the PC to the phone so I copied them in a temporary folder on the phone and then used the total commander (free) on the phone to move/copy files to the desired destination. There is a warning message of overwriting, but it worked for me
good luck
I use PHM Regedit to set KEY_LOCAL_MACHINE\Security\Phone\Skin\Enabled = 0'. I had the same problem with Enabled =0 changing back to 1. what I did was to backup the registry before doing a soft reset.
Changing the carrierlogo.gif, if you use Total Commander or GSFinder go to options and make sure the Rom files are hidden otherwise you are trying to overwrite carrierlogo.gif in the Rom.
Removing TMO phone skin is easy:
HKLM\Security\Phone\Skin\Enable=1
Remove DIALER a PROGRESS entries under the Skin entry.
But if you modify these entries in some registry app, after soft reset they will be back, so best way is do it during instalation phase. I've created a few cabs for:
enable phone skin
disbale phone skin
remove skin registry entries and changing smart dialer skin to blue.
Changing Phone pad to qtek's one.
If would some want i can attach them here or upload them to the ftp.

Enable MMS folder via Registry

Hi guys,
Question....does someone maybe know the registry settings to enable the mms folder in WM5?
Sure I know I can use a cab for it, but I am trying to find out what registry settings are needed to enable the MMS folder without installing the CAB file.
I am looking for the specific settings for a HTC Wizard, but settings from another HTC phone would be a good indication to start (I hope).
Regards, thanks and to all a very happy new year (of developing),
Molski
One of the CAB files I posted (I think) had it in it.. And I know I've seen the keys around here somewhere.. Unfortunately, I don't have an 8125 any more though, and I'm not quite finished with poking around my 8525 yet (planning on unlocking the ExtROM today so I can start deciphering CAB files).
I'll let you know what I come up with from the 8525 perspective.
I found your CAB file and I extracted it.
Unfortunately the same results as I have with the T-Mobile MMS Folder cab....it doesnt work
I install the CAB file, the MMS folder shows up, I export all the MMS Registry settings, do a hard-reset, import all the Registy settings and no MMS folder showing up.
I think it has something to do with the following registry values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\EntryID]
"Deleted Items"=dword:00009F00
"Inbox"=dword:0000F79F
"Outbox"=dword:00005FBB
After a hard-reset and installing this CAB file every time the values are different??
Could be. I'm honestly not too sure. But whateve reg values are in that CAB I've used over countless resets.
I'm getting ready to walk out the door in a few minutes, but when I get to my buddy's place I should be able to sit down for a few and look at the CAB and see what's in there again and go from there.
Take a good look at the values I posted....I really think it has something to do with those values changing every time you install the cab after a hard-reset.
Thanks!
Molski
Which CAB file are you using? I see a couple that I've posted.. Want to make sure I'm looking at the right one..
Beside having the MMS Folder to appear, I think you should have a service provider cab in ExtRom to configure to the right Service Provider's Server or you have to manually key it.
I am not sure if Wizard is the same.
cab files like mms folder and contain the values of certification on them it cannot be integrated so far, i tried,when you install a cab like mms, it writes several numbers to the cert part of the registry,once you install another cab that contains cert values ,it just overwrites the old values .
this is why the service providers never integrates such settings.
all this values that the mms cab writes to the registry can be found in the .XML file ,but must of them are build in the setup .dll ,the dll is coded with a set of instructions ,and this are the one that enable mms.
lets say you manage to extract all the reg settings for mms,then build into a custom cab this is all fine,but now you also want to integrate lets say..smardialing,well u cant because when you export the reg settings from one it overwrites the other because they use the same address in the registry.(cert}
I already have integrated SmartDialing in the default.hv and it works, will install a few cert apps and check if Smartdialing still works.
The only thing that is giving problems so far are:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\EntryID]
"Deleted Items"=dword:00009F00
"Inbox"=dword:0000F79F
"Outbox"=dword:00005FBB
I checked every settings that is created by the MMS folder Cab, but only these settings will change after installing the CAB.
But after reading your answer Faria, I think we cannot create inbox folders for whatever via the default.hv, is this true?
Thanks,
Molski.
molski said:
I already have integrated SmartDialing in the default.hv and it works, will install a few cert apps and check if Smartdialing still works.
The only thing that is giving problems so far are:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\EntryID]
"Deleted Items"=dword:00009F00
"Inbox"=dword:0000F79F
"Outbox"=dword:00005FBB
I checked every settings that is created by the MMS folder Cab, but only these settings will change after installing the CAB.
But after reading your answer Faria, I think we cannot create inbox folders for whatever via the default.hv, is this true?
Thanks,
Molski.
Click to expand...
Click to collapse
Smart Dialing working?
When?
How?
Where?
Please tell us.
These registry values are included in default.hv and/or user.hv
And it works
Maybe I forget something, but test it and let me know!
Molski
p.s. These Reg values are from a HTC Wizard
molski said:
These registry values are included in default.hv and/or user.hv
And it works
Maybe I forget something, but test it and let me know!
Molski
p.s. These Reg values are from a HTC Wizard
Click to expand...
Click to collapse
yes smartdialing works .i did it a month ago....but mms no.
once you put the cert settings for one of those cabs into the default hive its fine... but if you put another cab settings from another program into it,it gets overwrited .
molski said:
These registry values are included in default.hv and/or user.hv
And it works
Maybe I forget something, but test it and let me know!
Molski
p.s. These Reg values are from a HTC Wizard
Click to expand...
Click to collapse
Does this works on Universal Helmi Aku3.5 V1.3?

Need QuickGPS files/install.cab

Hi to all
I had problem with QuickGPs on my Blackstone (it didnt start anymore), so i downloaded quickgps.cab from this post but now quickgps says error after running it so i think this version was not for blackstone intended. Could anyone post for me original files and settings to get up and running QuickGPs without troublesome hard reset ?
Thnx in advance
I've noticed that rom Cookers include quickgps-es in their roms - would someone include one here ?
Ive helped myself and read that i need those files:
\Windows :
CleanGPSData (exe?)
CleanGPSData
GPS-icon (icon)
gpsapi
GPSAux
GPSAux.dll.040C
gpsdriver
gpsid
gpsid_HTC
mxiupdate_PA... (4 files)
QGPS_BUT_L (icon)
QGPS_BUT_L2 (icon)
QGPS_BUT_P (icon)
QGPS_BUT_P2 (icon)
QuickGPS
QuickGPS.Exe
QuickGPS (Htlm file)
QuickGPS
QuickGPS_help
Anyone please zip it from your Blackstone and upload here ??? Pretty please
kremator said:
Anyone please zip it from your Blackstone and upload here ??? Pretty please
Click to expand...
Click to collapse
I have zipped all gps packages from the oem folder of my 1.19 rom. I will attach it here, just tell me if something is missing. Don't worry about the provxml files, just take the files you need and copy them into \Windows.
But I'm wondering whether a hard-reset would a better solution.
Johnpatcher thnx very much it is working now - the quickgps is starting but i get cannot connect try again later if i try to download gps data - so i am thinking could anyone post the registry settings from a working quickgps blackstone and point me what software is the best to registry editing to change it properly ? If it will work ill describe it to help anyone new with problem like me so we will help each other out
I have uploaded the oem package(s), because they already contain all needed registry data. You'll find the data within the rgu file, for QuickGPS it is:
Code:
REGEDIT4
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\QuickGPS]
"RemindTime"="00000000000000"
"authname"="1"
"pwd"="1"
"curIP"=dword:00000000
"curRegion"=dword:00000000
"Bias"=dword:00000000
"EEFile"="xtra.bin"
"path"=""
"INIFile"=""
"NotifyID"=dword:00001960
"auto"=dword:00000000
"actSync"=dword:00000001
"remind"=dword:00000001
"INIDate"="20060531"
"region"="US"
"folder"="\\Windows\\"
"ExpiredTime"=dword:00002760
"MemoryRequired"=dword:00280000
"EnableInitData"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\QuickGPS\0]
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\QuickGPS\0\0]
"IP"="xtra1.gpsonextra.net"
"port"=dword:00000050
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\QuickGPS\0\1]
"IP"="xtra2.gpsonextra.net"
"port"=dword:00000050
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\QuickGPS\1]
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\QuickGPS\1\0]
"IP"="xtra3.gpsonextra.net"
"port"=dword:00000050
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\QuickGPS\1\1]
"IP"="xtra1.gpsonextra.net"
"port"=dword:00000050
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\QuickGPS\2]
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\QuickGPS\2\0]
"IP"="xtra2.gpsonextra.net"
"port"=dword:00000050
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\QuickGPS\2\1]
"IP"="xtra3.gpsonextra.net"
"port"=dword:00000050
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\QuickGPS\SNTP]
"Server1"="xtra1.gpsOneXTRA.net"
"Server2"="xtra2.gpsOneXTRA.net"
"Server3"="xtra3.gpsOneXTRA.net"
"GettingTimeout"=dword:00001388
[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Services\QuickGPS]
"Module"="\\windows\\GPSAux.dll"
"Prefix"="GUX"
"Index"=dword:00000000
"Info"=dword:00000000
"Order"=dword:000000ff
[HKEY_CURRENT_USER\ControlPanel\Notifications\{85ee47b2-57d7-EEFE-8e7a-36480443d084}]
@="QuickGPS"
"Wave"="Alarm2"
[HKEY_CLASSES_ROOT\CLSID\{85ee47b2-57d7-EEFE-8e7a-36480443d084}]
[HKEY_CLASSES_ROOT\CLSID\{85ee47b2-57d7-EEFE-8e7a-36480443d084}\InprocServer32]
@="GPSAux.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\MASD]
"QuickGPS"="1_00_18202228_00"
I'm using Resco Registry Explorer, but thats totally up to you.
However, I'm asking you again: What did you do in order to destroy QuickGPS so massively? Why you don't just hard-reset your device?
1. Quickgps stopped working i thought it was software issue so i downloaded a version mentioned in post #1 - after installing it i finally found that one must delete the xtra.bin but it was already too late.
2. Hard reset will require installing all the software again and for now i got no time for it.
3. I want to invent some workaround method for all the community - for about one year i was only a reader and I got many helpul posts from the forum so if I can help someone - why not
Can i import all the settings to the registry by copy/paste somehow without manually rewriting it ?
p.s. Johnpatcher if you will stop someday in Poland you got a beer for helping out thnx
kremator said:
Can i import all the settings to the registry by copy/paste somehow without manually rewriting it ?
Click to expand...
Click to collapse
With the right editor you can simply import it.
There are really many (free) registry editors out there, just search for them. I think an import function is a basic operation, so it should be included in most of the editors.
All files copied using Resco Explorer - even those he shouted that are in the rom file and registry imported (by the way I recommend ceregedit - one can change registry from desktop Pc - very handy), and still i get quickgps cannot connect try again later - any suggestions - am I missing something ? I switched also the AGPS feature off - should I turn it on ??? What does it do ?
I thought that an original xtra.bin file from windows directory might help - could someone post most recent one ?

Registry problem

Hi everybody,
does anybody knows if there's a way to restore the original registry? I edited some key, but I exported the untouched registry before.
When I select the .reg file, the PPC says "Load the registry script?", and after I tap "yes", a message says "This is not a registry script".
Why??
How I can load my old registry??
Thanks
FabioLibero87 said:
Hi everybody,
does anybody knows if there's a way to restore the original registry? I edited some key, but I exported the untouched registry before.
When I select the .reg file, the PPC says "Load the registry script?", and after I tap "yes", a message says "This is not a registry script".
Why??
How I can load my old registry??
Thanks
Click to expand...
Click to collapse
The reg file may be missing valid headers. This is a complex area. The following article (one of Werner Ruotsalainen's I think) talks about the validity of reg files:
http://www.smartphonemag.com/old_blogs/menneisyys/UltimateRoundupOfRegistryEditors.asp
If you serach within the article for the word formed, you'll see what I'm talking about.
Mike

[PROBLEM] Removing the "Redirect" values wont work

I know there are solved posts about this but I have tried all of those. I've been trying to figure this one out for the past 2 days now.
Remove the "Redirect" value under the following keys:
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\Owner]
[HKEY_LOCAL_MACHINE\ControlPanel\Buttons]
[HKEY_LOCAL_MACHINE\ControlPanel\Input]
The tips from above wont work in my rom. I have checked the registry after flashing my cooked rom and there is no "Redirect" value anymore on the said keys. I dont know why still the problem is there.
Under all settings>Personal>Buttons.. There are no buttons to assign...
When tying and XT9 is activated there are no words on the box of suggested words. Just an empty box.
Anyone who know something about this?
Thanks and Regards,
Pongskie
Have you tried just exporting the entire Startinfo registry key? That works fine for me, and it's the best way to keep your start menu organized.
Farmer Ted said:
Have you tried just exporting the entire Startinfo registry key? That works fine for me, and it's the best way to keep your start menu organized.
Click to expand...
Click to collapse
Hi Farmer Ted thanks, but can you please explain further how the entire startinfo could be related to my problem? I got confused there. I checked the startinfo entries and exported it. I didn't see anything related to my problem.
Startinfo has all the settings reg keys for the start menu. Also, look and see if there's a provxml with the re-direct keys. Delete all of them, and put the provxml in an EXT. I've never had the issue before (just read about it). I have a start menu EXT that is filled with modified (mostly empty) provxml's as well as my startinfo registry in an app.reg file. The modified provxml's over-write the stock ones from any new Sys build, and I never get any surprises in my start menu.
pongskie,
Just for the heck of it, add this to your personal EXT reg since it will be cooked last. This should work for you
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\Owner]
"Redirect"=-
[HKEY_LOCAL_MACHINE\ControlPanel\Buttons]
"Redirect"=-
[HKEY_LOCAL_MACHINE\ControlPanel\Input]
"Redirect"=-
lioryte said:
pongskie,
Just for the heck of it, add this to your personal EXT reg since it will be cooked last. This should work for you
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\Owner]
"Redirect"=-
[HKEY_LOCAL_MACHINE\ControlPanel\Buttons]
"Redirect"=-
[HKEY_LOCAL_MACHINE\ControlPanel\Input]
"Redirect"=-
Click to expand...
Click to collapse
Thanks lioryte but even though I added those in my personal EXT reg still the problem exist. I check my phones reg through CeReg Editor and I saw that the redirect was not there but still the problem exist. I really had no idea why this is happening.
All Settings > Personal > Buttons... no buttons to assign..
When typing and XT9 was active, the suggested words box was empty. The words are not there.
pongskie said:
Thanks lioryte but even though I added those in my personal EXT reg still the problem exist. I check my phones reg through CeReg Editor and I saw that the redirect was not there but still the problem exist. I really had no idea why this is happening.
All Settings > Personal > Buttons... no buttons to assign..
When typing and XT9 was active, the suggested words box was empty. The words are not there.
Click to expand...
Click to collapse
That pretty much suggests that a provxml is causing the problem. It's easy enough to fix this: look at all the provxml's in your dump folder, and search for redirect. You'll find it in 10 minutes. Then edit that file and put it in an EXT that runs at the end of your build.

Categories

Resources