Database Users

nothing work afrer update

i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...

albetratz said:
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
Click to expand...
Click to collapse
You should have read the instructions before trying the upgrade. ROM upgrade goes first, then the radio stack. I don't know if there's something you can do yourself to fix your device, or if you need to have it reflashed by your supplier. Anyone else?

bamse said:
albetratz said:
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
Click to expand...
Click to collapse
You should have read the instructions before trying the upgrade. ROM upgrade goes first, then the radio stack. I don't know if there's something you can do yourself to fix your device, or if you need to have it reflashed by your supplier. Anyone else?
Click to expand...
Click to collapse
Hi,
Seems like you are another of the many victims who got problems
after trying to upgrading new ROM & Raidio stack. Hope you still
got that warrant and get it replaced with a new one. Otherwise
you might have to try what some crazy guys do here trying to fix
it by doing all sort of bootloader etc.. Hope those who are trying
to get the upgrade ROM and Radio stack be very careful and make
sure your device are from the same supplier or distributor where
you got the new upgrade. Otherwise it will be screwed. Dont learn
your lesson the hard way.

same problem here.
i've got the O2 NL XDA
downloaded the 3.15 and radio updates from O2 NL website
installed updates as per instructions
1st update went without a hitch
2nd update totally screwed my xda.
now it takes a long time to start up, and when it does it just displays a white screen with a blue taskbar.
tried the bootloader way of flashing the rom, but still no luck
luckily I can send it back in to O2 to have it fixed.
I may try to do it by backup up another XDA, and reflashing mine.

Same prob with me..
I've got exactly the same problem. I downloaded the Rom update 3.15 and the new radio update. First I installed teh Rom update and after a hard reset I "installed" the radio update.
While updating the XDA hang and I waited for about ten minutes to see if the XDA was really hanging. I gave the XDA a hard reset but then the XDA didn't work anymore (white screen and blue bar on top).
I can still access the bootloader. I installed a Rom from a XDA which still works. Still no difference. When I tried to write the Radio rom to a sd-card I got that message that I have to connect one or another RS cable.
The XDA still doesn't work anymore. I have contacted O2 but they told me that they couldn't help me because they can't find my IMEI number in their system. I contacted the company where we ordered all the XDA's but I still don't have an answer.
Thank you O2 for being so nice with not helping me out with my one week old XDA without any scratch. I hope my XDA could be replaced as soon as possible since the XDA will not sold anymore when O2 changes to Telfort !

If you can make the ROM update work, you should be able to install the corresponding radio as well.
Try this:
1. Make sure you have the latest version of ActiveSync (=3.6)
2. Make sure the battery is fully loaded.
3. Extract the ROM update and Radio update to different folders.
3. Connect the cradle to AC-adapter and computer.
4. Put the device in the cradle and make sure it connects to ActiveSync.
5. Run the ROM installation application. Should take 5-6 minutes.
6. Run the radio installation. IMPORTANT: When you are prompted to remove power supply, pull the power plug from the cradle. If you do not disconnect power, the update will fail. I think this update took a little more time than the ROM update, and the device may seem "dead" for a while.
Good luck!

Hy Guys.
Are there any news about the problem flashing the XDA?
Tried last night to update my XDA to the last Qtek-Versions (ROM 3.16.52.....)
ROM Update works fine, but after the RSU Update the phone didn't work any more.
Have the same white screen with the blue taskbar and the little keyboardicaon down the right side.
Entering Bootloader mode there comes the Error Message "GSM Error"
Nice screen is the qtek "Booting Screen".
It shows
G <empty>
R <empty>
3.16.52
Hope there are any other hints to resolv this problem.
Have anyone got some experiences with sending it back to O2 with an "unoffical" Softwareversion?
Or is there any posibility to change the ROM Version to an old (original) O2-RomVErsion?
Thanks for any help....
Regards
Stefan

Hi Stefan,
I would suggest to try upgrade you device with any XDA ROM version by bootloader's CE to SD backup/restore and after try again to upgrade RUU by PC.
I know that upgrading/degrading by bootloader is the more safety way to do it.
Regards,
Riccardo

Riccardo said:
Hi Stefan,
I would suggest to try upgrade you device with any XDA ROM version by bootloader's CE to SD backup/restore and after try again to upgrade RUU by PC.
I know that upgrading/degrading by bootloader is the more safety way to do it.
Click to expand...
Click to collapse
SD-Card Writer just orderd
But I don´t know if it will work. Since the Bootloader says GSM Error, I think there will be no other posibility to restore it.
Let´s wait for some days, hope and we will see.....
Stefan

cannot flash my XDA

to whom that can help me.
My XDA just shows WALLABY Boot Loader v5.17, GSM OK.
And my active sync is not working.
I need to know what are the steps require to get my XDA working again.
Any help willbe greatly appreciated.

zeroone said:
to whom that can help me.
My XDA just shows WALLABY Boot Loader v5.17, GSM OK.
And my active sync is not working.
Click to expand...
Click to collapse
too few details
to understand what could be the cause.
Try hard reseting your PCC (you will LOOSE all non original application and data)
or uninstall and reinstall ActiveSync and see
and see what it says !
Nb : The source of the problem could be in your PC HW as well

Tried reinstalling actice sync, and hard resetting it but xda still not communicating.
The last version I flash is Rom version 4.00.01 ENG,Radio version 4.2.1.
I am trying to change wallaby 5.17 to 5.15. i have no success in doing so, even with the sd card.
I downloaded XDAtool but do not know what is required to get my xda to work.
Can someone help.

To my perception, active sync is not involved in your problem.
It is really down to the OS interfacing with your device.
What was the latest version of PCC OS that was working fine?
Which OS did you then try to upgrade with ?
What steps did you perform.
When and which error message did you get ?

Wallaby radio stack upgrade problem solve successfully!!

Hi everybody
Yesterday i had a problem trying to upgrade my wallaby to radiostack 6.18 tu RSU 6.24.
When i was doing the upgrade with the rsu files and the upgrade was in 88% in the screen appears:
" Upgrade problem, please reset" (something like that :? )
When i did the reset i got the boot screen and in the corner only i get the ROM version. The radio stack dissapears and then im not able to have my wallaby works.
Then i get into the wallaby bootloader version 5.15 and i got the following message:
GSM-ERROR
I reset the device a lot of times and nothing. i think " god i lost mi phone"
and then reading posts and posts i solve the problem in this way:
1:- I cook a rom image in an sd card using Xtools and a card reader instaled in your pc.
2.- when you finish insert the sd card with the image, enter again bootloader by holding On/Off and doing a soft reset
3.- Bootloader should tell you something that OS is detected on your SD-Card
4.- Press Action Key to install the ROM
5.-After finishing do a hard reset
Now your ROM should be installed on your device.
6.- turn off your device, maybe you will have to press the power button several times.
7.- Remove your SIM card
8.- Turn on your device, wait about 15 minutes and you can see that the device goes out off that frezze screen and gets into the align screen setup.
9. When you get the TODAY screen connect your device in the cradle and make a new asociation for your device
10. get into the windows file with the explorer of activesync on your pc and copy the 4 radio stack files in the windows file of your deviceq and the .exe file in the \Windows\StartUp folder of your device.
11. Restart the device and the upgrade will begins automaticaly in the back ground
12. when it sucsesfully done, do a soft reset and you must have your radio stack upgrade done and your wallaby completly recovered.
13.- Insert your SIM card again and enjoy
I hope this guide will help you
Rememeber to copy the correct radio stack in your device, i used the RSU 6.24 because i have a PW10B1 wallaby. check your version in the label in the rear part off your device
[/b]
if this tip results succesfully to someone please let me know. thanks

Well done, not many people manage to repair corrupt/missing radio stack, thanks for the details also, it may help resurrect other dead Wallabys.

which RSU to use
hi,
mine is PW10A1 so which RSU to use

Re: which RSU to use
maddawood said:
hi,
mine is PW10A1 so which RSU to use
Click to expand...
Click to collapse
ftp://[email protected]/Wallaby/Radio_Stack/RSU_V4.16_PPC.zip
HTH
Stefan

which rom you used?

Re: which RSU to use
LumpiStefan said:
maddawood said:
hi,
mine is PW10A1 so which RSU to use
Click to expand...
Click to collapse
ftp://[email protected]/Wallaby/Radio_Stack/RSU_V4.16_PPC.zip
HTH
Stefan
Click to expand...
Click to collapse
That link isn't working at the moment - I could sure use it

Link should be:
ftp://xda:[email protected]/Wallaby/Radio_Stack/RSU_V4.16_PPC.zip
Stefan

Thanks Stefan - I saw elsewhere what the password was, and noticed it was missing from the URL. I got the RSU file and have finally managed to get it on to the XDA, but still fails every time it restarts... the old 1% problem... Do you know if it is easier to update the radio stack from an SD card? The XDA is running the special edition ROM, which has at least given me back some control of the device.
Thanks in anticipation
Phil

PhilHirons said:
Thanks Stefan - I saw elsewhere what the password was, and noticed it was missing from the URL. I got the RSU file and have finally managed to get it on to the XDA, but still fails every time it restarts... the old 1% problem... Do you know if it is easier to update the radio stack from an SD card? The XDA is running the special edition ROM, which has at least given me back some control of the device.
Thanks in anticipation
Phil
Click to expand...
Click to collapse
I have the same problem, every time my device restarts, and stop at 1%. So I am wondering if Stefan can help us to give us solution in this case.

Worth the risk?
After reading this ordeal, is it worth the risk to upgrade a working radio stack? Does the telephone work substantially better after the upgrade?

Try other RSU's
kinowong said:
PhilHirons said:
Thanks Stefan - I saw elsewhere what the password was, and noticed it was missing from the URL. I got the RSU file and have finally managed to get it on to the XDA, but still fails every time it restarts... the old 1% problem... Do you know if it is easier to update the radio stack from an SD card? The XDA is running the special edition ROM, which has at least given me back some control of the device.
Thanks in anticipation
Phil
Click to expand...
Click to collapse
I have the same problem, every time my device restarts, and stop at 1%. So I am wondering if Stefan can help us to give us solution in this case.
Click to expand...
Click to collapse
Hi, have you tried using other RSU versions? I had the same problem too (1% fail) using 4.16. After giving up on the 4.16, I tried RSU 4.21 (exe). One shot and I was able to re-flash my RSU. What I did differently was to remove the AC power while doing the RSU upgrade (the exe file prompted me). Hope you get your wallaby up and running again.

I try alot of times but it stop at 1% - full batery got the same result.
help.

Re: Try other RSU's
Thank you for your help. I have tried many vensions of RSU, such as 4.16, 4.21, 6.24, 6.25, etc. But all of them showed 1% mistake.
morph751 said:
kinowong said:
PhilHirons said:
Thanks Stefan - I saw elsewhere what the password was, and noticed it was missing from the URL. I got the RSU file and have finally managed to get it on to the XDA, but still fails every time it restarts... the old 1% problem... Do you know if it is easier to update the radio stack from an SD card? The XDA is running the special edition ROM, which has at least given me back some control of the device.
Thanks in anticipation
Phil
Click to expand...
Click to collapse
I have the same problem, every time my device restarts, and stop at 1%. So I am wondering if Stefan can help us to give us solution in this case.
Click to expand...
Click to collapse
Hi, have you tried using other RSU versions? I had the same problem too (1% fail) using 4.16. After giving up on the 4.16, I tried RSU 4.21 (exe). One shot and I was able to re-flash my RSU. What I did differently was to remove the AC power while doing the RSU upgrade (the exe file prompted me). Hope you get your wallaby up and running again.
Click to expand...
Click to collapse

Re: which RSU to use
LumpiStefan said:
maddawood said:
hi,
mine is PW10A1 so which RSU to use
Click to expand...
Click to collapse
ftp://[email protected]/Wallaby/Radio_Stack/RSU_V4.16_PPC.zip
HTH
Stefan
Click to expand...
Click to collapse
Hi guys i have a pw10a1 too, and my radio version is 4.21, i really think it sucks. so is it a good idea to downgrade to 4.16??? or will it only be made worse. or can i use the 6.25.02 version? or is that for another phone type.. PWIEW srry for all the questions .. if 1 is awnsered. i'm happy

Please help upgrade Prophet/ overcome CID (VendorID) error

First of all THANK YOU all of the Great Minds of XDA Developers for all the support and great work you do for us!
a lot of your work, support and software and advice has been priceless help!
Any way no ass kissing here, just wanted to say thank you. ...and ask for help. As you probably know, there has been a lot of problems and issues with Prophet. (and very little or NO support and from manufacture and from providers. and there is not much available from xda developers forum users on this device. Though there has been great amount of support on any other devices. which has made me a happy user of Magician. But to cut it short, PLEASE HELPPPPPPP with Prophet!!! I can't reflash my XDA Neo with new WWE rom due to CID (vendor ID) error! It comes with german rom and I don't read german but love the phone! (and stuck with 2 year contract!) I tried aWisard utility numerus times in hopes that it would work despite the design for different device. I tried all kinds of roms available out there with no luck. and ofcourse HTC or O2 wouldn't help in any way! (different O2 support
techs said to me that I couldn't flash my Magician with WWE rom becouse it would kill the device! And I had it flashed in all the possible languages!) Any way, my magician is now a history (sold) and my new prophet is great pain in a ass!
Do you guys think you could help all of the xda community (and unlucky suckers) out here and help us overcome CID error so we can update/change our roms? (and screw the HTC, Qtek, Imate and O2 for such a poor support!)
I would greatly appreciate it! and it goes from all of us!

hi aleksandr
Just go the link below and follow the instruction to unlock the CID.
I just upgraded my 818 Pro to JAMin ROM, run very smoothly.
http://forum.xda-developers.com/viewtopic.php?t=37386

Hi, thank you very much for the reply! I did try this option but I have a little problem with Wisard program. I ran all the commands, enabled rapi,backed up my rom, ran unlock CID command, it returned "success" line, but when I try option -w- to write new rom into my prophet and get to "select OS rom file" where it saids to enter numbers only I don't know what to enter in the command line since the program doesn't have any roms listed in the command line screen. I've tried entering the rom release number, I even tried renaming rom to a number and I have placed the rom nk.nbf file in all the possible folders including "rom" in the program directory. but stil, once I hit enter, the command line window shuts down. could you advise?
and I did put the aWizard folder and rom file in the root directory on c:... tried d: too... stil, no result

Hi Alek,
Try this....
You now have a device that is CID unlocked, exit aWizard and locate the downloaded RUU update you now wish to load to your device. You should not need to use aWizard to do the flashing, just use the aWizard program to unlock the CID from the device.
I too have a Dopod 818Pro and I successfully flashed it to the new I-Mate JAMin ROM. All I used aWizard for was to unlock the CID on the Dopod 818Pro then exited aWizard and just used the downloaded RUU update.
Regards,
voyager

Thanks voyager, I guess you're very fast typist :lol:
Hi aleksandr,
Did you did an ActiveSync with your Prophet first then run the aWizard? For me I just run aWizard to enable RAPI and unlock the CID on my 818 Pro. Then I just double click on the latest JAMin ROM exe file, it detect my 818 Pro without any problem.

ualvoyager said:
Hi Alek,
Try this....
You now have a device that is CID unlocked, exit aWizard and locate the downloaded RUU update you now wish to load to your device. You should not need to use aWizard to do the flashing, just use the aWizard program to unlock the CID from the device.
I too have a Dopod 818Pro and I successfully flashed it to the new I-Mate JAMin ROM. All I used aWizard for was to unlock the CID on the Dopod 818Pro then exited aWizard and just used the downloaded RUU update.
Regards,
voyager
Click to expand...
Click to collapse
First of all thank you guys for getting involved and helping! I really appreciate it!
well, I tried just to CID unlock it with aWisard, got "successful" message and then I ran about 10 different upgrades from different providers, qtek, Imate, etc, and still got the wrong vender message!

hey mamakap,
you're right on the fast typing, my fingers are still burning...hee hee
voyager

mamakap said:
Thanks voyager, I guess you're very fast typist :lol:
Hi aleksandr,
Did you did an ActiveSync with your Prophet first then run the aWizard? For me I just run aWizard to enable RAPI and unlock the CID on my 818 Pro. Then I just double click on the latest JAMin ROM exe file, it detect my 818 Pro without any problem.
Click to expand...
Click to collapse
I usualy ran after sync, since the aWisard said it has to be fully ran. I will try it now!
Thank you! hopefully with all of your support I'll get the nedded results! Thanx!!
ok, just tried enable rapi with active sync off, the aWisard reopened and reastablished connection, but it still not finding the rom file.
wait a minute, does the rom file has to be in .nbf format or .nba?!
I'm looking right now for Extend Tool (64HTC Extended ROM Tool) and will convert the rom rom to nba file and see what happends.
man, I wonder how it worked for you just running unlock CID command and upgrading with the upgrade file!

Alek,
You already unlocked the CID from your device did you not? Your first post said you got a success message.
Put your device on the cradle or plug in the usb cable. Let ActiveSync do its thing then after the sync just double click on the RUU update you want to install. Follow the install wizard (NOT aWIZARD) of the RUU update. You do not need aWizard any longer to update the ROM, just use the RUU update you downloaded.
post if you need further help.
voyager

ualvoyager said:
Alek,
You already unlocked the CID from your device did you not? Your first post said you got a success message.
Put your device on the cradle or plug in the usb cable. Let ActiveSync do its thing then after the sync just double click on the RUU update you want to install. Follow the install wizard (NOT aWIZARD) of the RUU update. You do not need aWizard any longer to update the ROM, just use the RUU update you downloaded.
post if you need further help.
voyager
Click to expand...
Click to collapse
I've tried that several times and its still returnes the error!

Alek, one more thing ... you do realize that by doing this, you will wipe your device clean (hard reset) and you will need to load everything from scratch. If you use a back up program like Sprite or SPB backup YOU CAN NOT USE THAT BACKUP once you do this!!! You will be loading everything from scratch.
Just letting you know!!
voyager

OK Alek,
Tell me EVERYTHING you have done up to this point. I need to know what device you have, what ROM is currently on it and what ROM you want to flash with. Give me 5-10mins and I'll check back....lets try to get this resolved for you tonight.
voyager

yep! I do know this.. thank you though! I had an experience with Magician on that but I guess it's not much help with prophet though!
I haven't installed anything on this device yet.. just played with ExtRom, unlocked it and deleted O2 staff out of it just to see if I can do it But I do want to get the right OS in here first and then I'll worry about the rest of programs..

you guys wouldn't happen to have Extend Tool (64HTC Extended ROM Tool)would you? I'm visiting my family and I'm on my brothers PC dont have all my staff with me,and can't seem to find it on the XDA FTP

:?: What 64HTC Extended ROM tool are you referring to? If you're on your brothers computer do you have an ActiveSync connection to YOUR device? If so, is all synced up with your Outlook profile etc...?
First I need to know which Prophet you have (Dopod 818Pro, I-Mate JAMin or Q-Tek S200).
First let me say this, if you have a Q-Tek S200, I don't think you are going to be able to upgrade the ROM. I have seen several threads here that indicate that somehow Q-Tek S200 is permanently locked and that the aWizard program will NOT work on it no matter what, (or at least until some geneius here figures it out
Please let me know
voyager

ualvoyager said:
OK Alek,
Tell me EVERYTHING you have done up to this point. I need to know what device you have, what ROM is currently on it and what ROM you want to flash with. Give me 5-10mins and I'll check back....lets try to get this resolved for you tonight.
voyager
Click to expand...
Click to collapse
Hey, thank you so much! I really appreciate it!
ok, I have XDA Neo, German Version
rom 2.9.4.30 GER
rom date 2.14.06
protocol 413.1.03
ExtRom 2.9.4.120
First I have unlocked ExtRom with Wizards Utility
Then I tried to reflash the device to WWE rom with different upgrade utilities from different venders, tried Qtek s200,it didn't work, reterned wrong Vender ID error, then Imate- same result, then Dopod, using diferent RUU wizards, including Wizard Rom Upgrade Utility NoID.
still, no luck..
then I tried aWizard,
first I ran Rapi enable
second I made a back up of my own rom,
then Unlock CID,
then tried writing rom using aWisard, didnt work, aWizard doesn't finds any roms(and the program and rom are in the root directory of c
then tried just unlocking the CID and use Upgrade Wizards again, still, no luck!
tried praying, that didn't help either!
thinking about beer now! But I don't think that would help either
I did sync with PC and outlook.. activeSync4.1
I even tried flashing it with Danish rom, that I couldn't install it either..(I've read on XDA that flashing danish rom first than and only than I could try it to put WWE in to it. well, that didn't work either)
I tried running all possible rom upgrades that are available, and always got wrong vender id error.
even after aWizard reported that my rom was unlocked!
so I have no Idea what else I can try!
may be getting drunk and "sync it in the toilet"!

If we get this to work, you owe me a beer!!! OK, here's what I need you to do...
1) I tried researching this board for any signs of the O2 Neo being permanently locked like the Q-Tek S200, could find NOT anything. (edited, could NOT find anything)
2) Do you have a copy of the I-Mate JAMin RUU update on your brothers computer? If so great, if not, go get it. Try the latest one that came out yesterday.
3) Once you have this I-Mate JAMin ROM (save it to the Desktop for easy finding later) let me know.
4) Also, make sure you have ActiveSync 4.1 and it is set up and you have synced at least once with it. It doesn;t matter at this point what PIM info is on it since its going buh bye ina while, I just need it synced with a REAL partnership, not Guest.
Let me know when you have all these things done...
voyager

you've got the deal on bear! all you can drink! I'll bring you the german staff on my next visit to states!
any way, got it all! Imate jamin rom and sync has been done!

OK,
1) do a soft reset on the device. Once the device is fully up again, plug the usb cable in and let ActiveSync do its thing.
2) Open aWizard. Run the Rapi deal again. After that run the unlock CID.
3) If you get a success message after the unlock CID, CLOSE aWizard.
DO NOT UNPLUG THE NEO FROM THE USB!!! Let me know when this is done.

I found your 64HTC Tool:
http://buzzdev.net/component/option,com_remository/Itemid,100/func,fileinfo/id,196/

T-mobile MDA firmware on Cingular 8125

Is it possible to take the MDA firmware and install on the 8125? I'm using the 8125 with t-mob and would like to improve the network scanning etc..
Thanks.

dcmetrodude said:
Is it possible to take the MDA firmware and install on the 8125? I'm using the 8125 with t-mob and would like to improve the network scanning etc..
Thanks.
Click to expand...
Click to collapse
Tell me what is your IPL/SPL that is displayed when you first boot up the phone and depending on your answer, I may be able to help you.

IPL/SPL
Thanks! IPL 2.25, SPL 2.25

dcmetrodude said:
Thanks! IPL 2.25, SPL 2.25
Click to expand...
Click to collapse
Alright. That's what I was hoping you would say. Your 2.25 IPL/SPL means you have a G3 which is the only model that can be CID unlocked and CID unlocking is the only way you're getting T-Mobile firmware on your 8125.
Lets begin. You really hope you are VERY GOOD(better than very good preferably). The first step in your adventure is to downgrade your device from a 2.25 IPL using the button rom. You want to make sure your device is connected to your PC via ActiveSync or first put your device into bootloader mode by turning it off and then holding the camera button while powering it back on.
Now your device should have an IPL, GSM, and OS that is less than 2.
Now you want to download lokiwiz from here
Make sure your device is connected to your computer via USB cable but do not sync!! CANCEL ACTIVESYNC SETUP BEFORE CONTINUING
Unrar Lokiwiz and run the program lokiwiz v.02b I'm guessing your device is already sim unlocked since you are using a Cingular device with T-Mobile so you can go ahead and click C and then enter. Lokiwiz will CID unlock your phone and then automatically soft reset the device.
When your device powers back on, it will be CID unlocked.
Your next step is to flash the T-Mobile official rom that can be found here.
And now if you did everything correctly, you should now have the official T-Mobile WM5 rom and 2.26 IPL/SPL instead of 2.25. The extended rom, also included with the T-Mobile official rom, will automatically configure your netwok settings so you will also have the T-Mobile EDGE network and all MMS settings will be automatically configured for you.
Now this step is optional but highly reccomended. I reccommend you flash the IPL/SPL 3.08 for faster boot times. It flashes just like any other RUU so it is easy to use. You can download that here.
I really hope this helps you. Please post your results whether good or bad so I know if I was able to help.
NOTE: I AM NOT RESPONSIBLE FOR ANY DAMAGE THAT MAY OCCUR FROM USING THIS METHOD. This method is proven to work and I personally did exactly this same thing to my own phone with no problems.

Will do it today
Thanks very much. I already have my 8125 CID unlocked and SIM unlocked. Yes, I'm moderately good. .LOL.
I will try this today and post the results right after. Also, no worries, you are not liable for any damage that I might cause but fairly certain this will work.
Jay.

IT WORKED!!!
Dan, thanks very much for your clear instructions. It worked like a charm. You're a genius! My 8125 is running IPL/SPL 3.08 now.. I have to reinstall my apps (like ms voice commander, tcpmp etc.). Great work!
Jay.

dcmetrodude said:
Dan, thanks very much for your clear instructions. It worked like a charm. You're a genius! My 8125 is running IPL/SPL 3.08 now.. I have to reinstall my apps (like ms voice commander, tcpmp etc.). Great work!
Jay.
Click to expand...
Click to collapse
Glad I was able to help! Now your 8125 should be more accepting of your T-Mobile sim card and network settings(re-installing apps an un-avoidable part of the rom upgrade process).
If you ever need any more help with anything, My private messages and e-mail are public to everyone here on this forum so if you need help with anything, just shoot me a PM or e-mail.