I have unlock my O2 XDA... But he don't work wit T-Mobile sim-card.
He works with Telfort, Vodofoon but not with T-Mobile.
Help me please???
Your xda will be capable of working with gsm 900/1900 or 900/1800, it is possible that t mobile is running on a frequency that your phone is not capable of. Also you should check in your bootloader under gsm if you have chosen 900/1800 or 900/1900, if you have chosen only 900 then it will only accept sims on that frequency.
Related
I have managed to unlock my sx 56 from at&t using xda's software. Great. Trouble is it only enabled me to use O2 in the UK, i then went to yorch.net and downloaded more software which enabled vodafone and O2. Better. But I was wondering how I could unlock it so all networks worked. Can anyone give me a hand?
beini said:
I have managed to unlock my sx 56 from at&t using xda's software. Great. Trouble is it only enabled me to use O2 in the UK, i then went to yorch.net and downloaded more software which enabled vodafone and O2. Better. But I was wondering how I could unlock it so all networks worked. Can anyone give me a hand?
Click to expand...
Click to collapse
What you'll find is that there were two versions of the XDA (AKA...). One which was sold in Europe and ran on 900 and 1800Mhz frequencies, and one which ran on 900 and 1900Mhz frequencies, and was sold in the US (SX56, MDA, etc).
You may or may not know that Orange UK runs solely on 1800Mhz (as does T-Mobile), and as such you'll find your version to be incompatible with these networks... Sorry.
Although this device is from the states, I have found the option of using it oat 900 gsm or 900 / 1800 gsm or solely 1800 gsm. Does this mean that I may be able to use orange ?
beini said:
Although this device is from the states, I have found the option of using it oat 900 gsm or 900 / 1800 gsm or solely 1800 gsm. Does this mean that I may be able to use orange ?
Click to expand...
Click to collapse
Although it might give you this option, I believe that the radio hardware inside it is designed only for 900/1900mhz. I guess you could try and put an Orange SIM in, in an area where you know there to be coverage, and see if it works. It is unlikely to work on Orange or T-Mobile.
Let us know either way, cheers
I have tried my sim in an area I know there to be coverage. It just comes up as no signal. Since going through the site I'm thinking of getting a serial cable and using manipulator although its a little ambiguous about whether this will work. One company reckons they can do it but if what you say is correct then they'll be waisting their time and my money.
It might be easier to swap providers!
Beini, if your phone is 900/1900 it will not work on Orange which is 1800.
O2 XDA RUNNING ON ORANGE NETWORK FINE NO CONNECT TO INTERNET
Thanks guys for showing me how unlock my 02 XDA so I can phone out. But I just cant get it to connect to the internet - can anyone help me?
I dont have the option for 1800 (Baud Rate)
i suppose the getting access to the internet is going to be impossible...??
How do I configure it to atleast work for WAP?
Hi,
Is there a tool similaire ton GSM Band switch working for WM2003?
I need to change the GSM freqeuncy to 1900 since i need to go in Canada with an European XDA 900/1800.
I know i can do it from the bootloader, but each time i change it i get a full reset of my device, not so great
The bandswitch tool will not make your phone a tri-band phone, it will be 100mhz off frequency when on 1900, but heres the link anyway.
http://wiki.xda-developers.com/wiki/BandSwitchTool
Newbee: I live in Costa Rica (GSM 1800) and just bought a second hand XDA (T Mobile Phone PC). I am trying to unlocking it but there´s also the issue of the network (it comes to work in 900/1900). The Bootloader (v 5.15) has an option for changing the frequency to 900/1800. So, my question is: Which is the best way to make this XDA work in my country?
Thanks
If the phone is 900/1900 and your network is 1800 it will not work.
Hi,
is it possible to make the sx56 or tmobile ppc phone (normally 900/1900) work on the european 1800 mhz networks as well :?:
Thank you
Yes, you need to change it in the bootloader. Just select the one that has got the band you need. Don't try to change it in the phone settings, or it won't work.
Are you sure ?
I tried what you mention and it does not connect to Telstra...
I am running a 6.25 radio and an 4.01.16 TMO rom with a 5.17 bootloader.
I tried both 900 stand alone and 900/1800 but it did not work.
Any other trick ?
Thanks,
Bob.
so, has anyone ever succeeded with activating the 1800 mhz?
It's all depending on the device type ... PW10A works only for 900/1800 ... and PW10B works only for 900/1900 .... don't try the impossible!!! ... or you may permanently damage the RSU part!!!
better to get XDA II ... it's tri-band
well, I'm planning to buy one on ebay. how can I make sure, which one it is. what should I ask the seller to look for?
Thanks
is 900/1900 not only in America ?
in that case you should ask the seller to look at his address
ok, my question is if it's possible to make the american version 900/1900 to work on 1800 mhz
most countries in EU have both 900 and 1800 support
here is a list not sure if its 100% uptodate though but i doubt people are limiting the support
http://www.celluloco.com/products/customer/pages.php?pageid=18
zsilak said:
ok, my question is if it's possible to make the american version 900/1900 to work on 1800 mhz
Click to expand...
Click to collapse
Yes, only if the network supports 900 MHz
Zsilak, it will work on 900 but not on 1800.
hi guys
im from Israel..
i just got a new HTC aria device
i unlocked it with a code for any GSM carier for supported Israeli's network
now the phone is no longer under AT&T, it for Cellcom (an Israeli company)
the device support this:
HSPA/UMTS/(1900/850MHZ) GSM/GPRS/EDGE (Quad band 850/900/1800/1900MHZ)
Cellcom SIM CARD support this:
HSPA/UMTS/(2100MHZ) GSM/GPRS/EDGE (Quad band 850/900/1800/1900MHZ)
when i entered a regular sim which is for GSM only the device worked just fine..
but when i entered the USIM (the HSPDA's supported sim card - that suppose to support the GSM frequency as well) the device couldnt recognize any carier..
what should i need to do?
is there a way for changing the sim card frequency settings from the Android's settings?
do i have any possibilty for using HSPDA supported sim card without supported frequency in Israel?? because the device soesnt know the 2100MHZ HSPDA freq.
cause i thougt that device will handle this issue (works for calls) and will block me only when ill want to web through the Cellcom mobile in HSPDA
but still will let me to web through GSM witch is more slowly..
HeLPPPPP
i think you're out of luck unless you get the proper sim card for the proper frequencies.
Since Cellcom uses UMTS 2100, you would have been better off to buy an Asian or European phone. AT&T doesn't use the 2100 band and decided not to include it in this phone. You won't get 3G on that carrier.
According to Wikipedia, another provider - Pelephone - has some of its 3G service on the 850 band which would be supported by the Aria. But in any area that is served only by the 2100 band, your Aria will not get 3G.
No idea why one particular SIM isn't letting you onto their GSM network.