Related
I've bought used qtek 9100. microphone sensitivity level in phone mode was good enough.
Then I did Hard reset and my friends starts complaining that they are almost can not hear me...
I've tried AGC enabled and disabled, but without success.
there are some registry keys like "INTERNAL_RECORDING_GAIN" and "EXTERNAL_RECORDING_GAIN" in
"HTLM/Software/HTC/AUDIOGAIN"
Now I have
"INTERNAL_RECORDING_GAIN" = 06
"EXTERNAL_RECORDING_GAIN" = 16
Could someone post your values please?
Maybe you know any third party tools that I can use in order to increase microphone sensitivity....
same values on my K-Jam. Is it hardware problem on your phone?
water said:
same values on my K-Jam. Is it hardware problem on your phone?
Click to expand...
Click to collapse
It was fine before hard reboot...
Same with Jasjar
I had the same problem with my Jasjar, my problem was with the BT Headset and also with the microphone directly on the phone.
I sent my Jasjar to warranty, I will tell you if it gets fixed when it returns from them.
feels better after a couple of hard resets...... it is so strange..
poorotis said:
I've bought used qtek 9100. microphone sensitivity level in phone mode was good enough.
Then I did Hard reset and my friends starts complaining that they are almost can not hear me...
I've tried AGC enabled and disabled, but without success.
Click to expand...
Click to collapse
i have *exactly* the same problem with my k-jam, however i didn't hard-reset device yet. my friends are complaining very much. i've also checked the problem by myself - i received a call made by my k-jam and voice was tragedy, very quiet and noisy. connecting headset to wizard makes voice sound better but that's not the point to carry mobile with headset all the time! at first glance i thought it could be hardware problem, but if you're saying that before hard-reset microphone quality was fine, then probably it's software-related issue...
poorotis said:
there are some registry keys like "INTERNAL_RECORDING_GAIN" and "EXTERNAL_RECORDING_GAIN" in
"HTLM/Software/HTC/AUDIOGAIN"
Now I have
"INTERNAL_RECORDING_GAIN" = 06
"EXTERNAL_RECORDING_GAIN" = 16
Could someone post your values please?
Click to expand...
Click to collapse
i have the same values... maybe i'll try to change them somehow later on and check if it will give any difference.
feels better after a couple of hard resets...... it is so strange..
Click to expand...
Click to collapse
and what about registry keys which you mentioned above? values are the same?
Yes, registry values remains the same after hard reset.
But microphone sensitivity is definitely better now.
Later there was two or three hard resets - seems all is ok with sensitivity. Hope that problems will not appear again.
Please let me know if you'll find a solution.
poorotis said:
Yes, registry values remains the same after hard reset.
Click to expand...
Click to collapse
i've changed INTERNAL_RECORDING_GAIN value to 16, but voice quality is still the same. i suppose these settings may concern recording notes (dicating machine) only, not while phone connection. anyway, i've also found HLM/Software/HTC/VOICESETTING registry key, which may be actually that. but values are quite different there and i don't want to make something wrong...
poorotis said:
But microphone sensitivity is definitely better now.
Later there was two or three hard resets - seems all is ok with sensitivity.
Click to expand...
Click to collapse
well, finally maybe i'll try this solution as well, however i really hate to reinstall and reconfigure whole device over.
eva_d said:
poorotis said:
But microphone sensitivity is definitely better now.
Later there was two or three hard resets - seems all is ok with sensitivity.
Click to expand...
Click to collapse
well, finally maybe i'll try this solution as well, however i really hate to reinstall and reconfigure whole device over.
Click to expand...
Click to collapse
i did ROM update with latest ROM from clubimate.com, then i did three hard-resets in a row, checking voice quality after each one. unfortunately... voice quality was all the time the same and it was NOT good quality
microphone sensitivity - solution?
i did some tests with registry tweaks within HKLM/Software/HTC/AUDIOGAINx keys and after few hours of testing i've got confused and completely dizzy wheter microphone sensitivity is better or not. however i found some interesting things. HEADSET_UPLINK_VOLUME key is responsible for headset microphone sensitivity and SPEAKER_UPLINK_VOLUME is responsible for microphone while phone is in loudspeaker mode. so there are two other keys:
RECEIVE_UPLINK_VOLUME = 18
EARPHONE_UPLINK_VOLUME = 19
values above are default, but i've set both values to CC (204 decimal). after so many tries, soft-resets and test connections, i couldn't really differ which setting is actually better and which isn't. so i called to one of my friends who was complaining before that he doesn't hear me very well. and now he told me, that now's much better! voice was still bit noisy but much louder than before. so i guess i found a solution...
Do any of you have volume issues with MS Voice? I have it setup to announce incoming calls- it says the # and contacts name. The problem I have is that the voice is very quiet when the phone is ringing. Its similar to a txt message or email notification you receive while on the telephone talking to someone. I even tried it with no ringtone playing at all- just the msvoice.
Has anyone used the MS Voice on WM5 HTC Wizard?
I can not get the AGC to enable on a soft reset.
I have looked through the other forums and found refrence to this registry key for WM5: [HKEY_LOCAL_MACHINE\System\CurrentControlSet\AdvancedCPL]
This key is not showing up in the wizard though and I have tried to add it, that not helping either.
I have found another key that seems logical:
[HKCU\HTC\SOFTAGCData\EnableAGC]
However even setting this to 1 or 0 will not set the AGC to enable when started. Has anyone else found a workaround, or even having this issue?
I am also interested. Anyone?
I am also having this problem.
Coiuld this also be causing the low microphone sensitivity that some people are reporting??
about 2 weeks ago i changed some of my registry values for my mic because people were telling me that it was hard to hear what i wus saying....now everyone says that they can hear everything around me and that its always noisy....yet nothing is loud around me at all....i cant seem to find the post where i had changed the values in the registry....if anyone could tell me the default values for my mic and how to get to it in the registry i would greatly appreciate it....thanx....~Chris~
Nasty111 said:
about 2 weeks ago i changed some of my registry values for my mic because people were telling me that it was hard to hear what i wus saying....now everyone says that they can hear everything around me and that its always noisy....yet nothing is loud around me at all....i cant seem to find the post where i had changed the values in the registry....if anyone could tell me the default values for my mic and how to get to it in the registry i would greatly appreciate it....thanx....~Chris~
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=41273
thanx so much.....i really appreciate it
I have got an O2 trion which has a rather strange feature. When I call a number which is busy at the moment the busy tone is always delivered through the external speaker even though the external speaker is not on. HTC support says they have never heard of this problem and I should send the device in. I hoped that the ROM update HERMIMG_O2_1.25.207.1_SHIP.nbh whould solve the problem but it does not.
Does anybody else have the same problem and is there a solution?
ThankX
Stefan
Yes, I have same problem.
Same here on my V1605. It seems that there is stiill no way of resolving this issue.
See thread: http://forum.xda-developers.com/viewtopic.php?t=61115
I've also discovered that when the engaged tone sounds through the speakerphone I'm no longer able to hear the phone ring - it goes straight to call divert. Will phone CS tomorrow to see if they have any answers.
Hi dIesigner_1,
thank you for the link to the existing topic for this problem. I could not find it before my post.
I also do have the screen alignment problem so I sent the device back to O2. I am looking forward what will happen and if both issues can be resolved. :?:
same issue
hi,
i have the strange busy tone on speaker effect too.
thou hapily it doesn't seem to affect my call routing.
would be interested in the solution, though!
cheers.
I have the same issue on my HTC TyTN, not always but it happens random from time to time. Very strange behavior...
*push*
any solutions yet?
that is anoying as hell!
Hi,
I got a new O2 trion as an exchange device due to screen alignment problems. I also claimed the external speaker bug. Guess what! The screen alignment is ok so far but the external speaker bug is still there. I called the company CS which is responsible for the exchange. They claim never to have heard about the bug and they offered another exchange...I do not belive this will help as long as nobody complains about the problem and HTC is forced to do something.
I get that sometimes too
Found a solution from another thread
workaround update: change "Script" value to "ap" for tone to play only once, and change "Sound" value to "busytone.wav" (comes in rom, at least for HTC TyTN) - it's not loud at all.
Click to expand...
Click to collapse
Thanks to shadowcaster for this tip.
Also if you want to disable the sound just remove the Script key.
elysion said:
Found a solution from another thread
Thanks to shadowcaster for this tip.
Also if you want to disable the sound just remove the Script key.
Click to expand...
Click to collapse
Can anyone explain the remedy for this problem in the most lamens of terms for someone still soaking wet behind the ears regarding my Tytn and WM6 and smartphones in general? Please?
Is there a way (registry hack, any other program) to increase the volume of the speaker during the phone conversation? I also own a Hermes and the speaker volume of the Trinity is so low compared to it that I can sometimes barely hear the other party. Any help?
onurd said:
Is there a way (registry hack, any other program) to increase the volume of the speaker during the phone conversation? I also own a Hermes and the speaker volume of the Trinity is so low compared to it that I can sometimes barely hear the other party. Any help?
Click to expand...
Click to collapse
Are you aware that turning the wheel on the left side you can change the volume while in a phone call?
anonimo said:
Are you aware that turning the wheel on the left side you can change the volume while in a phone call?
Click to expand...
Click to collapse
I have the exact same problem. When I am in a public place and when there is some noise around, I hardly hear the person I am speaking to. Even when I turn the wheel on the left to maximum
I have spent a lot of time looking for a solution but I have just seen that for some qtek devices, there is the key [HKEY_LOCAL_MACHINE\SOFTWARE\HTC\AUDIOGAIN] with values EARPHONE_UPLINK_VOLUME and RECEIVE_UPLINK_VOLUME, that allow to modify the max output level of the speaker. But I didn't find that key in the trinity
Even if I turn the scroll wheel all the way up, the volume is too low.
The audiogain registry key (although it doesn't exist in trinity's registry) is actually to improve the sound quality of the microphone and not the volume of the phone.
When I first make a call, when I hear the first ring, it is actually louder but then from the second ring on, the volume decreases at least by 25%.
Anybody with any ideas?
anyone figured how to increase call volume yet?
I would also appreciate a solution to improve the Speakerphone volume.
I would appreciate any fix to increase the volume of anything!
The included stereo headphones are completely useless! My god, why did they even put a volume dial on the headphones? I can barely hear anything with this crap phone...
A pity considering every other features works just perfectly.
ive got the same problem, before the bass fix, the volume was high but with a really unstable and bad sound... after the fix, there is kind of better sound but in phone calls the volume is low.. i really start hating this device......
I've been using my new p3600 for two weeks now, and this low speaker volume issue is killing me. I've been a Noia user for years, and the difference in sound quality during normal calls is simply unacceptable. The p3600 has so many awesome capabilities for such a small phone, but when it comes to the most basic function, I'm quite disappointed with.
I would also appreciate a fix to improve the quality of the speaker.
Cheers
i can say that this is not the only problem, there are so many others that i stopped thinking of this one... im going for a final hard reset now.. im really tired...im sick of it.....
Someone has an idea ?
Has anyone found away to increase the incall volume yet ???
Someone posted this registry hack elsewhere (use at your own risk of course)
1. HKEY_CURRENT_USER
2. ControlPanel
3. SoundCategories
4. InCall
5. InitVol
6. Change the DWORD value to 6 (Default = 2)
7. Click Done
Wait approx 10-15 seconds before testing.
PS. If the registry key or value doesn't exist, you can always try creating it.
Has anyone tried this??
What was the outcome??
ausi said:
Has anyone tried this??
What was the outcome??
Click to expand...
Click to collapse
Yes i tried it and it never worked for me ...
i can also confirm that this does NOT work on the trinity, anyone else have any bright ideas...
Ah ha...
I just bought Dopod D810(HTC Trinity) for my wife yesterday, and just now she complained to me about this "low on call volume" to me. And since I'm the one recommended her the phone I have to responsible. LoL.
But despite this problem, all of other features are flawless, complete, with excellent case design. Kudos to HTC!!
Btw, this is kind of dejavu for me since it also happened on my Eten M600 back then. This issue can only be solved on driver level, i.e: patch the RILgsm.dll, or include this patched driver in newly cooked ROM.
On which, I don't have the necessary skills to do that... -sigh-
Any expert users can help us???
schizo said:
Ah ha...
I just bought Dopod D810(HTC Trinity) for my wife yesterday, and just now she complained to me about this "low on call volume" to me. And since I'm the one recommended her the phone I have to responsible. LoL.
But despite this problem, all of other features are flawless, complete, with excellent case design. Kudos to HTC!!
Btw, this is kind of dejavu for me since it also happened on my Eten M600 back then. This issue can only be solved on driver level, i.e: patch the RILgsm.dll, or include this patched driver in newly cooked ROM.
On which, I don't have the necessary skills to do that... -sigh-
Any expert users can help us???
Click to expand...
Click to collapse
hi this link doenst work "include this patched driver in newly cooked ROM"
zohaer21 said:
hi this link doenst work "include this patched driver in newly cooked ROM"
Click to expand...
Click to collapse
Sorry zohaer... my post does not contain hyperlink.
I just underlined it to stress up some points...
push!
also need a solution