shutdown button - MDA II, XDA II, 2060 General

Hi,
Is there someone who have a big shoudown button?
I mean same software or plug in to todays screen?
If yes let me know the manufacter.
I usually use a small one together with pocket plus.
Regards
JoseF

i don't like a big shutdown button !!!
i like small.
'batt.arm' is my favourits

Click-and-hold your pocketplus' shutdown button and set it as "large icon", hoping it's big enough for you.

Hi,
I have tried pocketplus 2 , the problem is my qtek hangs 2 3 times a day.
With the older version 1.3 I have not the possibility to change the to larger icon.
Thanks any way
JoseF

Related

The Red Button

Hi,
I would like to know if there is any way that you can tweak the registry or install any application to enable the red button to close (or minimise) the phone dialer after completing the call (as you would do on a normal phone). It seems really silly to drag out the stylus to close (or minimise) the phone dialer after receiving a call.
Regards
G
Just assign record button to OK/Close function.
Red button problem
Well, I can't even get my red button to turn off the phone (although it says in the manual that it does this). Which means that I have to get out my stylus to turn the phone off if I, say, pop into the library. Even then the stylus click (2 clickes, as it brings up a menu first) doesn't always work, and when it does it is slow. I just want to pres a button , and IDEALLY WITHOUT HAVING TO OPEN THE CASE (but that's anotheer topic!). Has anyone else had this problem; do you know how to solve it?
@Cathy
Hi, Have you done a soft reset? Try .
Have you install new programs recently?
Regards
JoseF
Re: Red button problem
Cathy said:
Well, I can't even get my red button to turn off the phone (although it says in the manual that it does this). [...] Has anyone else had this problem; do you know how to solve it?
Click to expand...
Click to collapse
This is a known bug. It just doesn't work the way the manual describes. Currently, I know of no way around it, although I think everyone wants that feature back, so I guess HTC will fix it in a future ROM upgrade.
Daniel

First Time - Hello + a few questions

Hy,
My name is Felipe and this is my first post. I wish the best for everybody here.
I just put my hands on my new XDA II and I have a few questions, if someone could help me with them I will apreciate very much.
1st- Yesterday I had to hardreset my unit, after that I found strange that the camera button does not turn on the XDA2, it still bring the camera function but only when the XDA2 is on. I found that strange because I am almost sure that I was able to bring the camera mode on with the XDA2 off with the press of the camera button. Soo, what is up? Does the camera button had to turn on the unit or it is the only button that does not turn on the unit if pressed?
2nd- I read all the manual and I saw nothing about speach dialler, I can´t belive a fantastic eletronic like this does not have this feature. I would like to confirm and if soo, I would like to know about one or two software to help me on this since I will almost always use the XDA2 on my bag and headset on.
3rd- I found the IR port just too little, I know sometimes size does not matter but have someone used the XDA2 as a remote controler for home eletronics? If it is not good enought could you please tell me if there is a IR emitter as a SD card, since the XDA2 does not have a CF card slot and the to be released backpack will have the cf slot placed in the botton. I heard that the Total Remote is a great solution, does it uses the earphone jack?
4th-I found something strange on my XDA2, on "settings" - "device information" - "call duration" I found that my unit received 1193046hours and 27 minutes of incoming calls. How this happen if the unit was suposed to be new (at least it arrived as new on box with seal, without any sign of used mark? is this any kind of test or bug? Is is possible to reset this number so I can have a real record of it?
5th- I bought a Blue Monkey usb/bluetooth dongle to be used on my desktop. I planed to use it to make the sync between the XDA2 and the descktop. But I found some problems. First I cant get the thing to work, so I ask is that possible to sync both of them with bluetooth? Two I had problems to find the descktop with my XDA2 while I had the Jabra250 instaled on the XDA2, soo can I have two bluetooth units bonded within my XDA2 or I need to chose and install only one?
Lots of questions for a first post.
I thanks in advance for the help.
Felipe
Zzzzzzz
Sorry, I fell asleep before the 2nd paragraph
Re: Zzzzzzz
mrg2003 said:
Sorry, I fell asleep before the 2nd paragraph
Click to expand...
Click to collapse
Hooo please, go back to sleep, you does not make anythink better.
Felipe
felcas said:
1st- Yesterday I had to hardreset my unit, after that I found strange that the camera button does not turn on the XDA2, it still bring the camera function but only when the XDA2 is on. I found that strange because I am almost sure that I was able to bring the camera mode on with the XDA2 off with the press of the camera button. Soo, what is up? Does the camera button had to turn on the unit or it is the only button that does not turn on the unit if pressed?
Click to expand...
Click to collapse
I just found out my device has deeply discharged itself over the course of just two days, so I can't test it right now. I would say it depends on the setting in one of the phone menus which determines whether any button wakes up the device, or whether you need to explicitly turn it on.
2nd- I read all the manual and I saw nothing about speach dialler, I can´t belive a fantastic eletronic like this does not have this feature. I would like to confirm and if soo, I would like to know about one or two software to help me on this since I will almost always use the XDA2 on my bag and headset on.
Click to expand...
Click to collapse
No voice-dial app comes with the device. A number of voice-dial and more general voice command applications exist. "Fonix Voice Dial" and "Microsoft Voice Command" come to mind immediately. Use Google for more details.
3rd- I found the IR port just too little, I know sometimes size does not matter but have someone used the XDA2 as a remote controler for home eletronics? If it is not good enought could you please tell me if there is a IR emitter as a SD card, since the XDA2 does not have a CF card slot and the to be released backpack will have the cf slot placed in the botton. I heard that the Total Remote is a great solution, does it uses the earphone jack?
Click to expand...
Click to collapse
I was thinking of performing an internal modification of the IR-port on mine.
4th-I found something strange on my XDA2, on "settings" - "device information" - "call duration" I found that my unit received 1193046hours and 27 minutes of incoming calls. How this happen if the unit was suposed to be new (at least it arrived as new on box with seal, without any sign of used mark? is this any kind of test or bug? Is is possible to reset this number so I can have a real record of it?
Click to expand...
Click to collapse
That number of hours works out to exactly 0x123456 in hexadecimal, so that is unlikley to be the real number of hours. Funny though... There is at present not yet a tool or method to reset the Hmalaya call timers.
5th- I bought a Blue Monkey usb/bluetooth dongle to be used on my desktop. I planed to use it to make the sync between the XDA2 and the descktop. But I found some problems. First I cant get the thing to work, so I ask is that possible to sync both of them with bluetooth? Two I had problems to find the descktop with my XDA2 while I had the Jabra250 instaled on the XDA2, soo can I have two bluetooth units bonded within my XDA2 or I need to chose and install only one?
Click to expand...
Click to collapse
I played with Bluetooth sync and found it not to be worth it at the moment. You need to hit 'Sync over Bluetooth' on the device, which is annoying, and you need to soft-reset and re-bond frequently. Wait for newer ROMs before actually using this feature.
Lots of questions for a first post.
Click to expand...
Click to collapse
No worries, I stayed wide awake.... Welcome to XDA-developers...
When I got my xda2 it also said I had millions of hours of outgoing calls, once you make a call however the pointers reset to zero and start counting, so dont worry about it.
felcas said:
Hy,
1st- Yesterday I had to hardreset my unit, after that I found strange that the camera button does not turn on the XDA2, it still bring the camera function but only when the XDA2 is on. I found that strange because I am almost sure that I was able to bring the camera mode on with the XDA2 off with the press of the camera button. Soo, what is up? Does the camera button had to turn on the unit or it is the only button that does not turn on the unit if pressed?
Click to expand...
Click to collapse
Refer "Start - Setting - System - Button Lock"
When it is locked u cannot on camera by pressing camera button when XDA is off
No worries, I stayed wide awake.... Welcome to XDA-developers...
Click to expand...
Click to collapse
Thanks a lot Peter, that is the kind of help I was looking for
cruisin-thru said:
When I got my xda2 it also said I had millions of hours of outgoing calls, once you make a call however the pointers reset to zero and start counting, so dont worry about it.
Click to expand...
Click to collapse
Yesterday I was able to use a chip of my girlfriend on my XDA2 and it worked very nice with the only exeption of the GPRS feature that I was not able to make work due to lack of information on my operator.
Anyway after I seen your post I had a look at the counter and unfortunately it did not zeroed but added the time I was using.
I will have to note it and then substract if I want to know on the future.
Anyway I thank you for the response.
Felipe
KCChia said:
felcas said:
Hy,
1st- Yesterday I had to hardreset my unit, after that I found strange that the camera button does not turn on the XDA2, it still bring the camera function but only when the XDA2 is on. I found that strange because I am almost sure that I was able to bring the camera mode on with the XDA2 off with the press of the camera button. Soo, what is up? Does the camera button had to turn on the unit or it is the only button that does not turn on the unit if pressed?
Refer "Start - Setting - System - Button Lock"
When it is locked u cannot on camera by pressing camera button when XDA is off
Click to expand...
Click to collapse
Hummm, I forgot to tell that I tried to unlock the button but there is no option to lock just one button or unlock it but only all of them or none (with exeption to the power button). If I do lock, then it work as stated on the manual, but the strange is that if I unlock, the camera button continues to be the only one that does not power the XDA2 when it is off. But it work fine if the xda2 is on. I tried to assign diferent role for the camera button to see if it have to do with the assigned functions but it appear that the problem is direct related to the button not to the function.
What I would ask is to you just verify if your xda2 turn on with the camera button. And tell me.
Thanks for the help.
Click to expand...
Click to collapse

MAGICIAN PROBLEM-BRIGHT DOWN WHEN SWITCHED OFF

Hi everybody!,
I'm really pleased with my new magician, but I have a little problem.
When I push the on/off button to switch the screen off (the phone is still on), and I want to switch it on again, the screen has the bright level at its minimum, so I can't see anything, and I have to go settings to raise the bright again.
Any known solution?
thanks,
Pau
Hi Pau,
When you press the power short your magician will go in standby. Press power long to dimm the screen, press it long again to switch to normal brightness. You can switch off the phone function by putting it into flight-mode. That's why the phone profile apps are popular.
A PocketPC can't be switched of complete. You would turn of all PDA functions as well, so no reminders etc. Not exactly what you expect from a PDA.
Hope this helps you. When your problem with the brightness persists, then try a hard-reset (press power & soft-reset at same time), don't forget to backup first with Sprite (trial available) or simular, xbackup can give you problems restoring contacts&appointments.
Still problems? Go back to where you bought it & get another one.
M
Thank you very much, it works the way you explain !!!!
thanks
You're welcome, these simple things are questioning all new users, including myself .
M
this helped me realise that there is no real SHUTDOWN option on the phone Till now i thought my phone was messed up
Damn for 3 days i was reading the whole Manual, and thought i cnat switch it off, there is phone porblem why the hell they indicate in Manual press more then 2 sec and it trurns it off. Now I know why lol :lol:
Btw which application can turn it off with one click on today screen without going in to flight mode etc ?
Thanks
You can use VJEschaton for it, SPB Pocket Plus etc etc. They all can suspend or switch off the screen with a single click on the today screen.
M
oltp said:
You can use VJEschaton for it, SPB Pocket Plus etc etc. They all can suspend or switch off the screen with a single click on the today screen.
M
Click to expand...
Click to collapse
Or also you can use psShutXp it's free and it's a great program
oltp said:
You can use VJEschaton for it, SPB Pocket Plus etc etc. They all can suspend or switch off the screen with a single click on the today screen.
M
Click to expand...
Click to collapse
Thaks for the reply I dont see Turn off in Pocket plus, I oly have Suspend and Sof Reset, where is that item ?
Skyward what do psShutXp do ? as i dont want to install thoussand of applications as I already have pocket plus installed
Thanks
There's no 'off' regarding your device. Suspend is the same as pressing the power button. I always use the 'screen toggle' option from spb (located in system like the suspend & soft reset option)
Cheers, M

Locking / S2U2 / Stand by questions

Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?
Doesn't pressing the "End call" button for 2-3 seconds also lock the phone?
Regards!
I do understand what you're saying. I figured out something really basic just the other day, that is if your phone is locked or in sleep mode just pull out your stylus and it'll unlock and wake up.
Just 1 movement.
Sorry if this is really common knowledge and you already know this but sometimes we overlook the more basic functions on such a complex device!!
Cheers
DB
Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.
jon- said:
Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.
Click to expand...
Click to collapse
Yep i do this too.
Press the power button mate, and it will lock the phone
I like how the phone unlocks when you take the stylus out but i didnt like how it locks the phone when you put the stylus back in, so i removed that function using the options in gyrator
I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.
is there a registry option for disabling the unlock when the stylus is removed/falls out ????
matou25 said:
I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.
Click to expand...
Click to collapse
why my HD no "Phone Canvas"?
Jezwick said:
is there a registry option for disabling the unlock when the stylus is removed/falls out ????
Click to expand...
Click to collapse
I searched a long time for this, but I didn´t find a solution
Standby locking
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.
surfaczer said:
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.
Click to expand...
Click to collapse
Have you tried HDTweak?
ScarySquirrel said:
Have you tried HDTweak?
Click to expand...
Click to collapse
Please explain
device lock
gt112 said:
Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?
Click to expand...
Click to collapse
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon
JPW said:
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon
Click to expand...
Click to collapse
You're Irish too, I presume?
The other option is you attached a very small cab.
OOOPS forgot cab
have edited post now
Jon
Should the device lock when I put the stylus in? I get the impression from this thread that it should but mine doesn't?

How to lock all buttons exept power button

how to lock all buttons exept the power button in wm6.5 ?
In wm6.1 it was possible to change that in settings/keys menu. But in wm6.5 this is gone for some stupid reason!
I dont want to use ext. app like pocketshield for such a basic and simple feature.
Reason: when phone is screenlocked - any hardwarekey wake up phone from standby. And of course the screen pops up and drain battery. HD2 keys are recessed and in the pocked can easyly accidentialy get pressed. When screen weaks up for some reasons (incoming call or other notification event) the buttons are not locked and i dont need to describe what funny things can happen then (just imagine on your own). Even accidentialy changes to my settings happened in my pocket without recognising.
HTC: this is ridiculous.
Pls help. Is there maybe a easy reghack to activate this basic feature again, like it was implemented in previous Rom versions?
the button lock in WM6.5 is the same as WM6.1 (got X1 before)
but in HD2 it's different.. and I don't think anyone solved this problem yet...
No known solution indeed, apart from using S2U2, and if you want to save more battery adding proximitylock.
what if you locked the keys while you are making a call with bluetooth and you want to look in your phone? You'd have to press the "end call/power" button..
Also since the power button turns the screen off, I automaticly press the same button to turn the screen on when I'm not making a call.. I can't count the times I've ended a call by accident like this.. another great design flaw of this phone
I still hope someone will find a solution for a working hardwarebuttonlock
no one found a solution yet?
i'm having the same problem and strangely i am irritating myself to death on this,
Not a good job HTC!

Categories

Resources