Related
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
albetratz said:
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
Click to expand...
Click to collapse
You should have read the instructions before trying the upgrade. ROM upgrade goes first, then the radio stack. I don't know if there's something you can do yourself to fix your device, or if you need to have it reflashed by your supplier. Anyone else?
bamse said:
albetratz said:
i want update radio update but its locked at %10 then i restarted
and i want to enter bootloader but nothing come to screen. no power no bootloader!
how can i solve this problem...
Click to expand...
Click to collapse
You should have read the instructions before trying the upgrade. ROM upgrade goes first, then the radio stack. I don't know if there's something you can do yourself to fix your device, or if you need to have it reflashed by your supplier. Anyone else?
Click to expand...
Click to collapse
Hi,
Seems like you are another of the many victims who got problems
after trying to upgrading new ROM & Raidio stack. Hope you still
got that warrant and get it replaced with a new one. Otherwise
you might have to try what some crazy guys do here trying to fix
it by doing all sort of bootloader etc.. Hope those who are trying
to get the upgrade ROM and Radio stack be very careful and make
sure your device are from the same supplier or distributor where
you got the new upgrade. Otherwise it will be screwed. Dont learn
your lesson the hard way.
same problem here.
i've got the O2 NL XDA
downloaded the 3.15 and radio updates from O2 NL website
installed updates as per instructions
1st update went without a hitch
2nd update totally screwed my xda.
now it takes a long time to start up, and when it does it just displays a white screen with a blue taskbar.
tried the bootloader way of flashing the rom, but still no luck
luckily I can send it back in to O2 to have it fixed.
I may try to do it by backup up another XDA, and reflashing mine.
Same prob with me..
I've got exactly the same problem. I downloaded the Rom update 3.15 and the new radio update. First I installed teh Rom update and after a hard reset I "installed" the radio update.
While updating the XDA hang and I waited for about ten minutes to see if the XDA was really hanging. I gave the XDA a hard reset but then the XDA didn't work anymore (white screen and blue bar on top).
I can still access the bootloader. I installed a Rom from a XDA which still works. Still no difference. When I tried to write the Radio rom to a sd-card I got that message that I have to connect one or another RS cable.
The XDA still doesn't work anymore. I have contacted O2 but they told me that they couldn't help me because they can't find my IMEI number in their system. I contacted the company where we ordered all the XDA's but I still don't have an answer.
Thank you O2 for being so nice with not helping me out with my one week old XDA without any scratch. I hope my XDA could be replaced as soon as possible since the XDA will not sold anymore when O2 changes to Telfort !
If you can make the ROM update work, you should be able to install the corresponding radio as well.
Try this:
1. Make sure you have the latest version of ActiveSync (=3.6)
2. Make sure the battery is fully loaded.
3. Extract the ROM update and Radio update to different folders.
3. Connect the cradle to AC-adapter and computer.
4. Put the device in the cradle and make sure it connects to ActiveSync.
5. Run the ROM installation application. Should take 5-6 minutes.
6. Run the radio installation. IMPORTANT: When you are prompted to remove power supply, pull the power plug from the cradle. If you do not disconnect power, the update will fail. I think this update took a little more time than the ROM update, and the device may seem "dead" for a while.
Good luck!
Hy Guys.
Are there any news about the problem flashing the XDA?
Tried last night to update my XDA to the last Qtek-Versions (ROM 3.16.52.....)
ROM Update works fine, but after the RSU Update the phone didn't work any more.
Have the same white screen with the blue taskbar and the little keyboardicaon down the right side.
Entering Bootloader mode there comes the Error Message "GSM Error"
Nice screen is the qtek "Booting Screen".
It shows
G <empty>
R <empty>
3.16.52
Hope there are any other hints to resolv this problem.
Have anyone got some experiences with sending it back to O2 with an "unoffical" Softwareversion?
Or is there any posibility to change the ROM Version to an old (original) O2-RomVErsion?
Thanks for any help....
Regards
Stefan
Hi Stefan,
I would suggest to try upgrade you device with any XDA ROM version by bootloader's CE to SD backup/restore and after try again to upgrade RUU by PC.
I know that upgrading/degrading by bootloader is the more safety way to do it.
Regards,
Riccardo
Riccardo said:
Hi Stefan,
I would suggest to try upgrade you device with any XDA ROM version by bootloader's CE to SD backup/restore and after try again to upgrade RUU by PC.
I know that upgrading/degrading by bootloader is the more safety way to do it.
Click to expand...
Click to collapse
SD-Card Writer just orderd
But I don´t know if it will work. Since the Bootloader says GSM Error, I think there will be no other posibility to restore it.
Let´s wait for some days, hope and we will see.....
Stefan
Can somebody please help me.
As I posted in this post, I scr3wed up my buddy's AT&T SX56.
I have got the thing past being dead, by putting a custom ROM on it.
However, I really need to get this thing back into AT&T mode, with either 2002 or 2003 on it. I will then upgrade to 2003.
Does anyone know where I can get a virgin AT&T ROM so that I can re-flash his system.
Thanks.
-=Nick=-
nickpoore said:
Can somebody please help me.
As I posted in this post, I scr3wed up my buddy's AT&T SX56.
I have got the thing past being dead, by putting a custom ROM on it.
However, I really need to get this thing back into AT&T mode, with either 2002 or 2003 on it. I will then upgrade to 2003.
Does anyone know where I can get a virgin AT&T ROM so that I can re-flash his system.
Thanks.
-=Nick=-
Click to expand...
Click to collapse
Check out Yorch.net
Okay, I'm making SOME progress.
Firstly thanks for the youch referral from kwlandry.
I had found the rom kitchens this afternoon while looking for solutions...
I'm busy flashing the ROM from SD for the umpteenth time.
It seems that whenever I flash the SX56 with an AT&T 30.09 ROM, then I get a hang on reboot.
I am currently trying the 4.00.05 ENG ppc2003 from yourch as it seemed to be non-specific (and a non-TMobile) one.
I seem to have the latest Radio stack (RA.33.02), and have been able to get a couple of ROM's to work.
Does anyone have ANY idea why the AT&T 30.09 ROM would fail in the same place every time? This is definately an AT&T unit, at is has the logo on the front. The phone was originally locked, but has been unlocked during the process.
I'm busy reading/searching the forum, but haven't seem to find this problem anywhere.
Thanks for ANY help.
-=Nick=-
I fixed many XDAs with your problem!
you could send the XDA to Siemens to repair/exchange.
Try flashing back to the original ROM via sd method then upgrading to wm2003.
You can get a copy of the 2002PPC ROM at siemens website. Cut & Paste the following link.
http://www.my-siemens.com/MySiemens...%2FMC%2FMC%2FSX56POCKETPCPHONE%2Fdesc,00.html
Extract the file to a directory, then use the XDA OSimage tool to write to SD card then use bootloader to write to ROM.
After a successful flash follow the same to upgrade to wm2003
You can also try this kitchen http://lumpistefan.dyndns.org/
BTW - the phone has to be fully charged. That might be the cause of your hanging issue.
I have posted this in answer to your other post, try using a diferent memory card for upgrade to wm2003, I had this problem when using an mmc memory card to upgrade to WM2003, it hung every time even though it seemed to complete correctly, I changed to a different memory card and had instant success.
Yes! I agree also. But, though "mmc" and "sd" cards are similar, in this case the process calls for an sd card. The size doesn't seem to matter, I use a 512mb, however some people have had issues with device detection. So, a 64mb card is recommended. Make sure it is formated before use. And again a fully charged phone is unlikely to have problems so save your battery till all requirements are in place. Also DO NOT DO A HARD RESET! untill you have a successful install. You could lose you GSM ROM.
Thanks for all the replies.
I have successfully flashed back to the original rom; I downloaded it from yorc.
Having got the device back up and running, I tried the upgrade to 2003 again; using the Siemens software in the cradle solution. Didn't work.
The battery was definately fully charged (90% or higher) at all times.
I will look to try another SD card, and see if that makes a difference, it just seems strange that the card works to restore WM2002, and either card or USB approaches to upgrading to WM2003 fail.
The card I've been using is a very generic 128MB MMC card.
Again, thanks to everyone for their suggestions.
First of all THANK YOU all of the Great Minds of XDA Developers for all the support and great work you do for us!
a lot of your work, support and software and advice has been priceless help!
Any way no ass kissing here, just wanted to say thank you. ...and ask for help. As you probably know, there has been a lot of problems and issues with Prophet. (and very little or NO support and from manufacture and from providers. and there is not much available from xda developers forum users on this device. Though there has been great amount of support on any other devices. which has made me a happy user of Magician. But to cut it short, PLEASE HELPPPPPPP with Prophet!!! I can't reflash my XDA Neo with new WWE rom due to CID (vendor ID) error! It comes with german rom and I don't read german but love the phone! (and stuck with 2 year contract!) I tried aWisard utility numerus times in hopes that it would work despite the design for different device. I tried all kinds of roms available out there with no luck. and ofcourse HTC or O2 wouldn't help in any way! (different O2 support
techs said to me that I couldn't flash my Magician with WWE rom becouse it would kill the device! And I had it flashed in all the possible languages!) Any way, my magician is now a history (sold) and my new prophet is great pain in a ass!
Do you guys think you could help all of the xda community (and unlucky suckers) out here and help us overcome CID error so we can update/change our roms? (and screw the HTC, Qtek, Imate and O2 for such a poor support!)
I would greatly appreciate it! and it goes from all of us!
hi aleksandr
Just go the link below and follow the instruction to unlock the CID.
I just upgraded my 818 Pro to JAMin ROM, run very smoothly.
http://forum.xda-developers.com/viewtopic.php?t=37386
Hi, thank you very much for the reply! I did try this option but I have a little problem with Wisard program. I ran all the commands, enabled rapi,backed up my rom, ran unlock CID command, it returned "success" line, but when I try option -w- to write new rom into my prophet and get to "select OS rom file" where it saids to enter numbers only I don't know what to enter in the command line since the program doesn't have any roms listed in the command line screen. I've tried entering the rom release number, I even tried renaming rom to a number and I have placed the rom nk.nbf file in all the possible folders including "rom" in the program directory. but stil, once I hit enter, the command line window shuts down. could you advise?
and I did put the aWizard folder and rom file in the root directory on c:... tried d: too... stil, no result
Hi Alek,
Try this....
You now have a device that is CID unlocked, exit aWizard and locate the downloaded RUU update you now wish to load to your device. You should not need to use aWizard to do the flashing, just use the aWizard program to unlock the CID from the device.
I too have a Dopod 818Pro and I successfully flashed it to the new I-Mate JAMin ROM. All I used aWizard for was to unlock the CID on the Dopod 818Pro then exited aWizard and just used the downloaded RUU update.
Regards,
voyager
Thanks voyager, I guess you're very fast typist :lol:
Hi aleksandr,
Did you did an ActiveSync with your Prophet first then run the aWizard? For me I just run aWizard to enable RAPI and unlock the CID on my 818 Pro. Then I just double click on the latest JAMin ROM exe file, it detect my 818 Pro without any problem.
ualvoyager said:
Hi Alek,
Try this....
You now have a device that is CID unlocked, exit aWizard and locate the downloaded RUU update you now wish to load to your device. You should not need to use aWizard to do the flashing, just use the aWizard program to unlock the CID from the device.
I too have a Dopod 818Pro and I successfully flashed it to the new I-Mate JAMin ROM. All I used aWizard for was to unlock the CID on the Dopod 818Pro then exited aWizard and just used the downloaded RUU update.
Regards,
voyager
Click to expand...
Click to collapse
First of all thank you guys for getting involved and helping! I really appreciate it!
well, I tried just to CID unlock it with aWisard, got "successful" message and then I ran about 10 different upgrades from different providers, qtek, Imate, etc, and still got the wrong vender message!
hey mamakap,
you're right on the fast typing, my fingers are still burning...hee hee
voyager
mamakap said:
Thanks voyager, I guess you're very fast typist :lol:
Hi aleksandr,
Did you did an ActiveSync with your Prophet first then run the aWizard? For me I just run aWizard to enable RAPI and unlock the CID on my 818 Pro. Then I just double click on the latest JAMin ROM exe file, it detect my 818 Pro without any problem.
Click to expand...
Click to collapse
I usualy ran after sync, since the aWisard said it has to be fully ran. I will try it now!
Thank you! hopefully with all of your support I'll get the nedded results! Thanx!!
ok, just tried enable rapi with active sync off, the aWisard reopened and reastablished connection, but it still not finding the rom file.
wait a minute, does the rom file has to be in .nbf format or .nba?!
I'm looking right now for Extend Tool (64HTC Extended ROM Tool) and will convert the rom rom to nba file and see what happends.
man, I wonder how it worked for you just running unlock CID command and upgrading with the upgrade file!
Alek,
You already unlocked the CID from your device did you not? Your first post said you got a success message.
Put your device on the cradle or plug in the usb cable. Let ActiveSync do its thing then after the sync just double click on the RUU update you want to install. Follow the install wizard (NOT aWIZARD) of the RUU update. You do not need aWizard any longer to update the ROM, just use the RUU update you downloaded.
post if you need further help.
voyager
ualvoyager said:
Alek,
You already unlocked the CID from your device did you not? Your first post said you got a success message.
Put your device on the cradle or plug in the usb cable. Let ActiveSync do its thing then after the sync just double click on the RUU update you want to install. Follow the install wizard (NOT aWIZARD) of the RUU update. You do not need aWizard any longer to update the ROM, just use the RUU update you downloaded.
post if you need further help.
voyager
Click to expand...
Click to collapse
I've tried that several times and its still returnes the error!
Alek, one more thing ... you do realize that by doing this, you will wipe your device clean (hard reset) and you will need to load everything from scratch. If you use a back up program like Sprite or SPB backup YOU CAN NOT USE THAT BACKUP once you do this!!! You will be loading everything from scratch.
Just letting you know!!
voyager
OK Alek,
Tell me EVERYTHING you have done up to this point. I need to know what device you have, what ROM is currently on it and what ROM you want to flash with. Give me 5-10mins and I'll check back....lets try to get this resolved for you tonight.
voyager
yep! I do know this.. thank you though! I had an experience with Magician on that but I guess it's not much help with prophet though!
I haven't installed anything on this device yet.. just played with ExtRom, unlocked it and deleted O2 staff out of it just to see if I can do it But I do want to get the right OS in here first and then I'll worry about the rest of programs..
you guys wouldn't happen to have Extend Tool (64HTC Extended ROM Tool)would you? I'm visiting my family and I'm on my brothers PC dont have all my staff with me,and can't seem to find it on the XDA FTP
:?: What 64HTC Extended ROM tool are you referring to? If you're on your brothers computer do you have an ActiveSync connection to YOUR device? If so, is all synced up with your Outlook profile etc...?
First I need to know which Prophet you have (Dopod 818Pro, I-Mate JAMin or Q-Tek S200).
First let me say this, if you have a Q-Tek S200, I don't think you are going to be able to upgrade the ROM. I have seen several threads here that indicate that somehow Q-Tek S200 is permanently locked and that the aWizard program will NOT work on it no matter what, (or at least until some geneius here figures it out
Please let me know
voyager
ualvoyager said:
OK Alek,
Tell me EVERYTHING you have done up to this point. I need to know what device you have, what ROM is currently on it and what ROM you want to flash with. Give me 5-10mins and I'll check back....lets try to get this resolved for you tonight.
voyager
Click to expand...
Click to collapse
Hey, thank you so much! I really appreciate it!
ok, I have XDA Neo, German Version
rom 2.9.4.30 GER
rom date 2.14.06
protocol 413.1.03
ExtRom 2.9.4.120
First I have unlocked ExtRom with Wizards Utility
Then I tried to reflash the device to WWE rom with different upgrade utilities from different venders, tried Qtek s200,it didn't work, reterned wrong Vender ID error, then Imate- same result, then Dopod, using diferent RUU wizards, including Wizard Rom Upgrade Utility NoID.
still, no luck..
then I tried aWizard,
first I ran Rapi enable
second I made a back up of my own rom,
then Unlock CID,
then tried writing rom using aWisard, didnt work, aWizard doesn't finds any roms(and the program and rom are in the root directory of c
then tried just unlocking the CID and use Upgrade Wizards again, still, no luck!
tried praying, that didn't help either!
thinking about beer now! But I don't think that would help either
I did sync with PC and outlook.. activeSync4.1
I even tried flashing it with Danish rom, that I couldn't install it either..(I've read on XDA that flashing danish rom first than and only than I could try it to put WWE in to it. well, that didn't work either)
I tried running all possible rom upgrades that are available, and always got wrong vender id error.
even after aWizard reported that my rom was unlocked!
so I have no Idea what else I can try!
may be getting drunk and "sync it in the toilet"!
If we get this to work, you owe me a beer!!! OK, here's what I need you to do...
1) I tried researching this board for any signs of the O2 Neo being permanently locked like the Q-Tek S200, could find NOT anything. (edited, could NOT find anything)
2) Do you have a copy of the I-Mate JAMin RUU update on your brothers computer? If so great, if not, go get it. Try the latest one that came out yesterday.
3) Once you have this I-Mate JAMin ROM (save it to the Desktop for easy finding later) let me know.
4) Also, make sure you have ActiveSync 4.1 and it is set up and you have synced at least once with it. It doesn;t matter at this point what PIM info is on it since its going buh bye ina while, I just need it synced with a REAL partnership, not Guest.
Let me know when you have all these things done...
voyager
you've got the deal on bear! all you can drink! I'll bring you the german staff on my next visit to states!
any way, got it all! Imate jamin rom and sync has been done!
OK,
1) do a soft reset on the device. Once the device is fully up again, plug the usb cable in and let ActiveSync do its thing.
2) Open aWizard. Run the Rapi deal again. After that run the unlock CID.
3) If you get a success message after the unlock CID, CLOSE aWizard.
DO NOT UNPLUG THE NEO FROM THE USB!!! Let me know when this is done.
I found your 64HTC Tool:
http://buzzdev.net/component/option,com_remository/Itemid,100/func,fileinfo/id,196/
Hi,
I seem to have made my MDA compact II a brick. I was having problems hard reseting it (Format FAT failed) so I tried upgrading to a different firmware.
I now have the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
firmware on it. This is not good as it is for the Prophet, although it says in the Wiki that this should work. Anyway I can now hard reset the phone, so all I need to do is flash the TmobileUK firmware back on it. The only problem is that it doesn;t let me do it. It says error:296 upgrade only.
Anyone any ideas?
cheers.
extract the contents of the t mobile package using win rar
download
ftp://xda:[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
and put in the same directory and run.
It gets to 1% then says invalid command, not for this phone.
Latest T-Mobile ROM is at http://www.tm-phonedownloads.com/download_manager_mda_com2.html
very stable, much better than the original shipped ROM
Finally got it back.
If you have a T-mobile MDA II (Charmer), then Flash it with a Prophet ROM, the only way I could get it back was to use the following:
RUU_Charmer_100_100_049_CHS_Ship.rar
typho5 -x nk.nbf
Then created a new nk.nbf with the output using nb2nbf.
I then Flashed this with Wizard_RomUpgradeUtility_noID
And miracle it started. I quickly CID unlocked it and am now flashing with latest T-mobile.
My problem was that the Rom Update programs wouldn;t read version 2.xx ROMS.
Anyway it has just finished and looks fine. Thanks for everyones help, now I just have to get my SD wifi card working.
How do you do it
Hi I just got a MDA compact II from T Mobile UK I would like to upgade the ROM but its all very new to me since you know what you are doing can you post an idiots guide to the process.
Hope you can help
Hi, it depends what Rom you want to upgrade it to, the latest one from T-mobile is pretty good. There is an unbranded one (no T-mobile logos or suchlike) or there are Roms in different languages. It depends why you want to change the firmware and what to.
I suppose I don't really know the problem is as I just got the thing did some searching and came across this site read your post and thought i want to do this maybe you have some suggestion. Also I tried the RUU mentioned in an earlier post but it I can't update when I get to the from/to screen it tells me I will go from 2.6.2.110 to 2.6.2.110 I was expecting to move up.
daveh1171 said:
I suppose I don't really know the problem is as I just got the thing did some searching and came across this site read your post and thought i want to do this maybe you have some suggestion. Also I tried the RUU mentioned in an earlier post but it I can't update when I get to the from/to screen it tells me I will go from 2.6.2.110 to 2.6.2.110 I was expecting to move up.
Click to expand...
Click to collapse
Sounds like you are running the latest version. Is there a problem with the phone? If the phone works fine, I would just unlock it using lokiwiz02b (So you can use any network card) and then EnableRapi (So you can run unsigned code) then CID unlock it using awizard (so you can use any Brand/Language of ROM).
If you have no problem with the firmware I would leave it alone.
Hi,
Yep, I'm in the same situation, why does the prophet firmware load onto the charmer without erroring? !!!
Anyway, I have a copy of RUU.rar but I'm having problems working out what I need to do to it between unpacking and flashing the phone (i.e. the typho5 bit and then the nb2nbf).
Can someone please help me out?
P.S. The phone just sits at a black screen that says 'Dopod' across the front at the moment
Can anyone tell me how to 'force' a downgrade of firmware? I've got what appears to be the right firmware from FTP but it won't over write the incorrect version 2 installation as the uploader software thinks it's later therefore better.
There has got to be a better option from the command line surely?
HELP phone is dead
Chirpy said:
Can anyone tell me how to 'force' a downgrade of firmware? I've got what appears to be the right firmware from FTP but it won't over write the incorrect version 2 installation as the uploader software thinks it's later therefore better.
There has got to be a better option from the command line surely?
HELP phone is dead
Click to expand...
Click to collapse
Progress, but now it works only from the charger so the shipped ROM upgrade won't work as it reports the battery as being at less than 50%.
Anyone know how to force a ROM upgrade or where I can find the right ROM files to use awizard to do this?
Hey all,
I am sorry posting the repeated question again, but this has a bit of a twist, and to this, i searched and didnt find any answer around.
My friends just bought a HTC P3300 from China. It came with a chinese DOPOD rom.
I had the original Shipped htc rom with me there so i upgraded my 1st friends mobile, with the shipped rom successfully, and then upgraded it to wm6 successfully.
now when i flashed my 2nd friend's device with the HTC Shipped rom, the upgrade process went to 3% and then the device just restarted and got stuck on the Initial dopod boot screen.
It is not moving from there.
So i downladed a couple of other roms, including the DOPOD ship rom,. but when i try to upgrade it, it says " ERROR:200, The Upgrade Software is outdated" kinda message!
now can someone please guide me how can i bring alive my friends rom, what is it i should do to successfully install some rom in it in English.
Please help!
thanks a lot!
Hi all,,
Please someone help me out with this problem...
Which rom should i try, or what is the problem with this?
Thanks a lot.
Did you cid unlock the hone either with USPL or IMEIcheck? If so, you should be able to load an OEM rom back on the phone. Try the HTC WWE WM5 rom or the German WM6...I dont see any reason why an unlocked phone wont accept at least one of those.
hi itschase...
No, i dont know if it was cid unlocked or not.
About USPL or IMEICHECK, nothign was done on it.
As i mentioned, one phone got flashed successfully, but the other failed!
I have tried the HTC WWE WM5 shipped rom, if thats what u are hinting to, but not the German WM6.
I have a crazy idea...
My phone is not bricked, but I was able to try running the USPL ROM Update utility on my phone from bootloader. I have zero idea if this would unbrick your phone, but its worth a shot - cant get much worse (or can it?). Download the USPL file, and run just the rom update utility with your phone in bootloader. After it resets your phone, put it back into bootloader and try reinstalling an OEM rom. I am probably wasting your time, but its worth a shot....
s
aaaaa
llllll
Insane Devil:
you need original rom for your device (with correct model id).
this should flash your device.
in the future, install uspl on your device before upgrading rom.
regards,
Factory Roms should be able to help u out in this...?
itschase said:
I have a crazy idea...
My phone is not bricked, but I was able to try running the USPL ROM Update utility on my phone from bootloader. I have zero idea if this would unbrick your phone, but its worth a shot - cant get much worse (or can it?). Download the USPL file, and run just the rom update utility with your phone in bootloader. After it resets your phone, put it back into bootloader and try reinstalling an OEM rom. I am probably wasting your time, but its worth a shot....
Click to expand...
Click to collapse
Good Idea but ... not correct!
Your device might be CID locked and you were able to run USPL from bootloader, because ... you already have had USPL. Am I right?