great - apparently in the last 10 mins my SD card has become corrupted, losing half of my files.....
Doeas anyone know how I format the thing to get it sorted out??
Thanks
pocket mechanics or storagetools should be able to format the card
if not
and a sdcard reader also cant
then people say that using xdatools to put a nbf on the card and entering the bootloader of the device and choosing format from there is also a way to format cards which dont want to be format'd
ta very much - i used storage tools
Related
The Sandisk 256mb SD card in my xda II refuses to be formatted! I have used Cnetx Flash Format, StorageTools and PocketMechanic to format the card to get rid of unwanted data. All progs re-format the card, but when rechecking with File Explorer, all data is still there. I note that these files are marked in the Album app with a small lock image, as if they have been attributed read only. If so, how can I change the file attrib?
are you sure that the read/write lock on the card is not turned on ?
Definitely not.
can a sdcard reader format it ?
with pocket mechanics did you do a logic format or a fysical format ?
Definitely not.
Did a logical format with Pocket Mechanic
try a fysical format then it's more like a lowlevel format on a pc
Definitely not.
Click to expand...
Click to collapse
was this definitly not directed to the sdcard reader for the pc not being able to format the card ?
Have tried the low level and once again a logical format. Same result: folders and files still present. The "definitely not" was a repeat. Don't have a reader, but will try to borrow.
Have tried to format the SD card via a usb reader (which works! tested on a CF card). No luck: "Windows was unable to complete the format." I guess its kaput, and I have to resign myself to replacing it. Boy, this sure annoys me.
it happened to me once ... I formated my SD card on my qtek 1010 devices and it couldn't be formated on my i-mate :shock:
There is a silly trick but worked for me ... try using XDAtools to copy a ROM file to the SD card ... insert it into your device, usually it asks you to format the card ... this time press YES
HI Biso007
YES. 100% SURE IT WORKING!!!!
Tried XDAtools - got message that "the media is write-protected. Error opening target device. " Tried again only to be told "target device too small to hold an image." Now since the lock is off, this leaves me only one conclusion: its fried. I cannot understand how it could have gotten write-protected? I have never applied any security software to it.
Your SD card chip is damage!!!
hi.
If it doesn't work. It means that your sd card chip is damaged. Check if it is under warranty?
Put it in the toaster for 5 minutes, it wont fix it but it will pass the time.
When i first got my XDAIIi i can wirte things into storage card but after i install lot of crap software then i do a hard reset after this everytime i want to copy or write somefile into storage card it say "The media is write protected" please anyone can help me
why dont you look yr SDcard, maybe the 'small switch' is by accident set to lock.
that storage which is the storage rom
after I try to unlock tat extended rom it wont work and it also f*** up my storage rom now I cant even write anything on it
Try using a p[rogram to format the SD Card.
It will work then
Cheers
Try Flash Format (www.cnetx.com), its a great program that deals with Storage Cards.
It can also verify your SD Card!
you can also restore your files from the damaged SD card using undelte software & a SD card reader :wink:
CHEEEEEEERS 8)
My Jam can't read my card!!
The information can be found, and the files/folders inside of the SD can be found..But it doesn't show up..I need to go to the finding thing and then it comes up as a list..Not a folder saying "SD"..
Anybody have a clue why it does that?
I've seen this problem before with a Ridata 1GB SD card. The data and structure on the card become corrupt. I've been able to fix this by backing up whatever is on the card (whatever is salvagable) and then doing a reformat of the card. If it won't let you reformat on the ppc, try doing it first on a regular pc with an SD card slot.
HTH
Hmm..Good idea, thanks.
ppc4 said:
I've seen this problem before with a Ridata 1GB SD card. The data and structure on the card become corrupt. I've been able to fix this by backing up whatever is on the card (whatever is salvagable) and then doing a reformat of the card. If it won't let you reformat on the ppc, try doing it first on a regular pc with an SD card slot.
HTH
Click to expand...
Click to collapse
indeed, that's the best option, ive got a sort of same problem to a few days a go, i backupt all my files on a map on my computer and format the card, and it help!
I have a 512 SD memory card, which when initially placed into my MDA compact was working fine. I have transferred files via activesync and the MDA was reading it at 512mb.
However, a couple of weeks ago. I had a message on the MDA asking if I would like to format the card for reading by this device. Initially I said no, however, it kept on coming up persistently until I clicked yes.
The format was done and I am now showing a size on my SD card of 139mb.
I have seen some of the previous posts and have bought a SD reader/writer, whilst this works perfectly, my card is still only 139mb. I have a feeling that the movie I transferred is taking up the rest of the memory, but not showing anywhere for me to remove it.
Does anyone have any suggestions, other than gentle pursasion with a hammer, to return the card to its proper size. Free would be best of course.
Thanks
In windows (your desktop computer) enable the option "view-hidden files"... perhaps you will find a lot of hidden files on your sd.
Otherwise, format the sd.
Sven,
Thanks for your response, tried hidden files, no luck. Also formatted the sd card and it still only reads 139mb. Shall I hit it with a hammer?
Cheers
Mark
adz1478,
Unzip the attachment onto your computer...
With your SD card in a card reader, format the card.
You should hopefully retreive full capacity- needless to say everything saved on the card will be gone.
worked perfectly, you just saved me £20 on a new card. Cheers
worked perfectly, you just saved me £20 on a new card. Cheers
Click to expand...
Click to collapse
Yep- no probs.
When you try to format the card from Windows- it does not always comply with the SD 1.1 specs. This is what the formatter program does.
Same problem - but!
When I tried the formatter program it thinks the card is write protected even though on the outside it is not! So i can't format it to the correct side.
Any ideas please?
Long story short I used my Mac to format my sd card because i was installing the updated android cab & now my tp2 wont read my sd card no matter how many times i format it in fat 32. I even formattted it on a windows pc, still no luck in getting my tp2 to recognize, so i was hoping if there was a cab for the format sd from a stock wins 6.5 rom, then maybe that would help. I'm running Nrgz rom which as far as i know has no format option.
any help? I'm dying without my android partition now :-/
try flashing to
a Rom that has SD Format. Try to Format from the cell its self. worth a try..... or replace the SD Card
J.McRae718 said:
Long story short I used my Mac to format my sd card because i was installing the updated android cab & now my tp2 wont read my sd card no matter how many times i format it in fat 32. I even formattted it on a windows pc, still no luck in getting my tp2 to recognize, so i was hoping if there was a cab for the format sd from a stock wins 6.5 rom, then maybe that would help. I'm running Nrgz rom which as far as i know has no format option.
any help? I'm dying without my android partition now :-/
Click to expand...
Click to collapse
Pocket Mechanic will format an SD disk from your WM phone. You could install the 15 day trial and use it to format the card. Do a google search for it.
stevedebi said:
Pocket Mechanic will format an SD disk from your WM phone. You could install the 15 day trial and use it to format the card. Do a google search for it.
Click to expand...
Click to collapse
No matter how I try, I can't format my SD from POcket Mechanic. Always says the device is not functioning.
Yes, I'm running Pocket Mechanic from ram (installed to phone), and even for a card I'm not using (AFAIK). Could be some other program messing with it..
I just use my workstation..
On another note, if you put it in the PC and it doesn't even see it as a drive, some things just won't work with that card anymore, although I've often found some cameras will blindly write to a card and I've formatted several "dead" cards in a camera before and then I could see them on the computer.
Long ago I also had a card reader + special software at work that would blindly low-level zero a card then the drive at least showed up as "unformatted". Came in useful when we were developing something that used SD and trashed the card often
can someone tell me what this means and how to fix>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>E:cant mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0 <<<<<<<<<<<<^^^^^^^^ i have a 8gb class 2 sd hc card can someone help me