Database Users

Power on problem!! very annoying. Please HELP

when i first got my mda II it worked fine, but after an hour of so, after i turned it off, it wouldnt turn on again. after fiddling with it, i got it to turn on again by pressing the call button, then really quick after pressing the on button, but that only works sometimes. the only sure bet to turning it on again is a soft reset, which is VERY inconvenient... it anyone has any idea whats going on, PLEASE help me
thanks alot

Power on problem!! MDA II after upgrade to wm2003se
Hi,
I've got the same problem. I bought MDA II with wm2003. Fiew days after I installed wm2005 but it was unstable and many programs didn't working correctly so I downgraded it to wm2003se. Everything looks quite ok except the problem with power on with no activity (sometimes it srarts with power_on+red_call pressed at the same time but after that green led no blinking).
Now this is:
ROM version: 2.06.00WWE
ROM date: 06/14/04
Radio version: 1.18.00
Protocol version: 1337.38
ExtROM version: 1.72.165
Is there any idea to resolve this problem?
Best regards,
Slawek

Radio stack freeze the boot screen

have upgraded my Wallaby radio stack from original to 6.25 using .EXE file. My device restarted , but nothing happen just the boot screen. is there anything I can do ??
There are only G and U letter un right corner.
I can go to the boot loader (GSM error --> failed to start)
What can i do to go to today screen and reflash an other radio stack (like 4.21) ?
Qtek 1010 - 64M - ROM 3.04 ENG (WM2003SE) -

RAdio Stack depends on the Model. Check your rear sticker. It it´s a PW10Bx-model it uses 900/1900 MHz and require a 6.xx Radio stack.
If it is a PW10Ax then you have to use a 4.xx Radio stack.
Try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan

thks
but i can't access to the device (install the good radio stack).
the splash screen freeze (with G an du lettre in place of the version of the radio stack).
Many hard reset, many test ...
if i can go to the today screen i can flash the good radio stack.

Have you tried installing the Special Edition ROM?
Still getting no Today Screen ?
Stefan

i cant get to today screen

All is working fine now.
1 : remove the sim card from the device
2 : go to the boot loader and test the phone (failed for all)
3 : hard reset
4 : wait 20 minutes
5 : you've got the to day screen and you can reflash the RSU (do not put the .exe file in the windows/startup)
and that all for me

I can't get to today screen....

irsan_donald said:
I can't get to today screen....
Click to expand...
Click to collapse
I have the same problem with my wallaby.. It shows splash but wont continue for a long time (more than 30minutes) I try to dowgrade ROM back to original Tmobile ROM wiwt 2002windows but still wont display today screen..
so i try to uprgrade to win 2003se and after 18 minutes today screen shows up.. I am lucky man now.. my wallaby its working again THANX GOD and U BOYS I LOVE U ALL !!!!

http://forum.xda-developers.com/viewtopic.php?p=138920#138920
ive just done it
HOPE THIS HELPS YOU.

New T-mobile Rom (universal)- Constantly hanging

Hey guys, i have just recieved a replacment MDA Pro from t-mobile as the last one froze on the bootscreen after a rom upgrade.
Now this MDA Pro has come with the new rom preinstalled on it version:
Rom 1.30.114 WWE
Radio 1.10.03
Ext Rom 1.30.232 WWE
But i have this problem where it will constantly freeze. If i am using the camera and i press the right button on the D-pad so i can go to video mode it freezes and i need to give it a soft reset to get it working again, sometimes it seems like if i push it in the back of the phone it just switches off and gives me a white screen.
Has anyone else out there found this sort of problem or know how i could fix this?

My phone displays the message" signal may be not available try later"

Hello, I upgraded to Explode latest WM6. ROM. Whenever I receive a phone call, I press the answer key , my phone displays a message " The signal may not be availble try later". However, the signal indicator shows full four bars. Now if I try to make a call the phone displays " operation failed" . Only after soft reseting the phone,I am able to receive or make phone calls . What is the problem?
Cingular SX66
ROM Version: 6.00.00.WWE
ROM date: 03/02/05
Radio version: 1.15.00
Protocal version:1337.45
ExtROM:

SnapVue hang-up because of modem

Hi all
I´m having a severe problem with SnapVue hanging up after 1-2 hours of being restarted.
It doesn´t matter in which state is Vista (or any other OS), if the screen is on or off, the state of "auto turn off" or the advanced network functionality setting mentioned in another thread.
It happened with the original ROM and is happening with PLIROM. No soft or hard reset will help. After 1-2 hours running, it hangs up.
To use recover from this state, I have to restart it from Vista´s ShiftControl or remove the battery.
The only way to keep it running without problems is turning the modem off. It took me a long time to find this!
My Shift is Spanish, from Orange (has no simlock tough) with the following device information:
ROM Version: 1.22.405.0 WWE
ROM Date: 12/08/07
Radio version: 1.58.21.23
Protocol version: 25.65.30.04H
Can you check the device info of your Shift for differences?
Any idea where the problem might be?
TIA
Daniel

dproldan said:
Hi all
I´m having a severe problem with SnapVue hanging up after 1-2 hours of being restarted.
It doesn´t matter in which state is Vista (or any other OS), if the screen is on or off, the state of "auto turn off" or the advanced network functionality setting mentioned in another thread.
It happened with the original ROM and is happening with PLIROM. No soft or hard reset will help. After 1-2 hours running, it hangs up.
To use recover from this state, I have to restart it from Vista´s ShiftControl or remove the battery.
The only way to keep it running without problems is turning the modem off. It took me a long time to find this!
My Shift is Spanish, from Orange (has no simlock tough) with the following device information:
ROM Version: 1.22.405.0 WWE
ROM Date: 12/08/07
Radio version: 1.58.21.23
Protocol version: 25.65.30.04H
Can you check the device info of your Shift for differences?
Any idea where the problem might be?
TIA
Daniel
Click to expand...
Click to collapse
Did you remove the battery and let it without power for few minutes and started again on both the sides? If not I will strongly suggest that.
thanks
Ram