We are using a Cisco PIX Firewall in the workplace and use the Cisco VPN client to connect to it. Is there a VPN client available for the SPV M1000 that would allow this to happen, I checked the Cisco site - there was some stuff about Windows CE etc but nothing about PPC2003 in particular. Thanks!
This product supports Cisco Secure PIX Firewall VPN -
http://www.certicom.com/index.php?action=product,mvpn
Related
Anyone know where I can find a Cisco VPN client for the wizard? Most of the Cisco site is password protected.
JRed
Are you needing a VPN that is XAUTH Compliant?
I'm not sure, I just know that on my PC that I have to use the Cisco client to login. The VPN host that I am trying to connect to is a Cisco VPN 3000 Series Concentrator (I think that is the model). So anything that works with this would be fine.
My university uses the Cisco VPN Client for students to access the wireless network. Is there a Windows Mobile Application that will allow Cisco VPN?
I don't think so but I'm not 100% certain. It would be sweet if there was.
google eduroam securew2, and search you uni it pages.
You can use the inbuilt l2tp/ipsec vpn using certificates assuming they have configured the cisco concentrator at the other end correctly.
Hi,
I try to establish a vpn connection to our company-VPN.
VPN Gateway is a cisco device. "Normal" connection via notebook with cisco vpn client works.
On my TyTN i installed ncp client. But i dont know how to configure the cisco settings.
On Cisco VPN Client:
- IP Adress of Gateway
- Group Authentication
- Transport IPSec over UDP
On ncp VPN Client:
- IP Adress of Gateway is easy to find
But i cannot assign the other settings. NCP Client has a lot of settings.
Has anybody success to establish vpn connection via windows Mobile to a cisco Gateway ?
Got it. Not the vpn Client was the problem.
The Blackberry connect SW (disabled!) prevented connection via vpn.
Deinstallation of BB Connect und vpn Client from Bluefire works fine.
What did you use as the VPN client to connect into the cisco gateway?
Do you use a RSA secureID token?
I am tring to get a VPN connection running from my HTC p3600i, WM6.
New VPN Client
Since a few days i use another VPN Client: www.ncp.de
Works fine. We do not user RSA Token. Only Group Authentication (free string to identify groups) and XAUTH - user/password.
WinnieK said:
Since a few days i use another VPN Client: www.ncp.de
Works fine. We do not user RSA Token. Only Group Authentication (free string to identify groups) and XAUTH - user/password.
Click to expand...
Click to collapse
Can you write your settings? I can't configre this
Any ideas on a MPPE PPTP VPN via WM6? I have been trying to get this to work for months and can't. I am operating under the presumption that the VPN client in WM5/6/6.1 doesn't support MPPE and I am therefor up S#!T creek without a 3rd party dialer...
(It is a VPN connection to my work and yes as sorry as this is they still use an encrypted PPTP connection for all of their VPN connections. If they would just move on to something a LITTLE more current L2TP/IPsec I wouldn't be having any of these problems...)
But is there such a thing as a 3rd party PPTP VPN client for WM5/6/6.1 I haven't been able to find one...
TIA~
WinnieK said:
Since a few days i use another VPN Client: www.ncp.de
Works fine. We do not user RSA Token. Only Group Authentication (free string to identify groups) and XAUTH - user/password.
Click to expand...
Click to collapse
kindly can you show where to set the Group Authentication ?!!!
New(ish) Cisco AnyConnect VPN Client
Cisco have released an AnyConnect VPN client for Windows Mobile 5/6 (version 2.3.185). This is specifically targetted towards the ASA 5500 platform as the VPN server, however it should also work with IOS VPN devices (I am told?).
I haven't tried it, however I have seen it demonstrated and it all seemed to work.
Personally I prefer the integrated L2TP/IPSec VPN client and have posted previously on how to get this working with Cisco PIX 6.3, ASA/PIX 7.x and IOS devices.
Andy
AnyConnect VPN client will support only SSL VPN, that avaiable on Cisco ASA and IOS from 12.4(20)T or later.
Can I have two VPN connections to two different places on the same computer?
I work at two different medical facilities. I have a VPN connection to one and I'm trying to set up one for the other. When I'm in the New Connection Wizard and I pick "automatically dial connection", it makes me pick the medical facility that I already had on the computer to "automatically dial" when trying to create this new one.
cool vpn has given the users privilege to surf internet with freedom and security Thanks to VPN
HI to all
I am looking for a working VPN Client (the Iphone has one which is working) to connect my Touch Cruise to the intranet of my firm.
I read that NCP has one, but it is quite expensive ...
is there any other solucion?
For free?
Shrew is working fine on my laptop, but y would like to check something out of mi WinMo Polaris.
I actually am using WinMo 6.1 but if necessary I also could change to 6.5
Thanks
Isidar
OpenVPN has a free client for WinMo but I don't know if it will work for your VPN, give it a shot.
you can use hamachi-0.0.3.1
http://rapidshare.com/files/83751409/hamachi-0.0.3.1.rar (for your mobile)
https://secure.logmein.com/products/hamachi/list.asp (for your pc)
clmbngbkng said:
OpenVPN has a free client for WinMo but I don't know if it will work for your VPN, give it a shot.
Click to expand...
Click to collapse
i think openvpn is not compatible with cisco vpn since cisco uses ipsec and openvpn uses a simply tunnel created on udp port 1194 (no need for gre,ike,or pptp port's/protocols open).
it's much simpier but work very well and just with the p12 certificate (ok my certificate is 2048bit so i think it is minimally secure, nothing like a dynamic generated rsa key but even better than just a ssh tunnel or something like).
Back in the days of Windows Mobile 2003 I used to use "MovianVPN" to connect to my university network. The software is now superseded by AnthaVPN (www.anthasoft.com). It is designed for Windows Mobile 5 and they have no mention of WM6 compatibility, but I think its worth a shot.
I also read about another product called "Bluefire VPN", but I can't seem to find it online at the moment.
Edit: The above solutions are not free, but the price might be refundable by your company.
Cisco AnyConnect for Pocket PC
There is an application from Cisco itself that you can download and try.
It's based an Cisco's new Anyconnect module
anyconnect-wince-ARMv4I-activesync-2.3.2016-k9.msi
http://cisco.quanza.net/anyconnect-wince-ARMv4I-activesync-2.3.2016-k9.msi
The website http://www.tycoon.mxm.cx/ has a couple of VPN software apps for all OS
Shawn Botha said:
There is an application from Cisco itself that you can download and try.
It's based an Cisco's new Anyconnect module
anyconnect-wince-ARMv4I-activesync-2.3.2016-k9.msi
http://cisco.quanza.net/anyconnect-wince-ARMv4I-activesync-2.3.2016-k9.msi
The website http://www.tycoon.mxm.cx/ has a couple of VPN software apps for all OS
Click to expand...
Click to collapse
The Cisco device at the other end has to be setup for SSL VPN otherwise Anyconnect does not work. This is somewhat new and SSL VPN licenses are expensive.
Personally I use AnthaVPN on my HTC Touch (WinMo 6.1 Pro) and it works great with our IPSec Cisco VPN (the old way since we're too cheap to buy the licenses for the SSL VPN).
EDIT: And if your company is setup for SSL VPN, you should not need to download a client. Your admin should give you a website and it connects to the router/firewall/VPN concentrator and downloads the proper client for you. Better than going to some random site to download something.
The integrated L2TP/IPSec client?
I have posted previously on here about VPN clients and Cisco Routers & Firewalls. The integrated L2TP/IPSec client works with both Cisco PIX/ASA Firewalls as well as IOS Routers - it is dependant on how these are configured though. I posted two configurations from PIX 6.3(5) and PIX 7.2(4) - both of which I had working. It seems there are some limitations when setting up groups however my testing didn't include this.
http://forum.xda-developers.com/showthread.php?t=444948&highlight=Cisco
I was going to test the Group issues someone reported but never got around to it - I have a full-time job as well
Andy
Shawn Botha said:
There is an application from Cisco itself that you can download and try.
It's based an Cisco's new Anyconnect module
anyconnect-wince-ARMv4I-activesync-2.3.2016-k9.msi
http://cisco.quanza.net/anyconnect-wince-ARMv4I-activesync-2.3.2016-k9.msi
The website http://www.tycoon.mxm.cx/ has a couple of VPN software apps for all OS
Click to expand...
Click to collapse
Cisco nice good work,try it with my Dopod and router working.
thank you guys to put the links.
AnyConnect Secure Mobility Client 2.5
Hi guys
Could anyone post the link for Cisco AnyConnect Secure Mobility Client 2.5 as it is one of the only vpn client solutions having WM6.5 and Cisco routers work together
Could you propose any other solution for WM6.5 and Group authentication cisco servers
Thanks
I have just downloaded the AnyConnect Secure Mobility Client, v2.5 and it works a treat thanks for this post, it was released in Aug and works with 6.5
Please note, i legally have a CCO account and valid service contracts for Cisco ASA and VPN gateways.
To the previous poster, please buy relevant CCO access to download.
Hi all,
I have been tinkering with connectivity into my corporate network and so far been able to get a connection to our Office Communicator server via ASProxy and a secure wireless connection. However I am looking for a solution that works across my 3G connection via a VPN.
I have looked at the market place versions of OpenVpn and I cannot get it to work with our Cisco Gateway. I got stuck at the tun and adb part, so not sure what I need to do at this point so though I would ask the experts on here ;-) There has been much work on a very important missing part which was a user authentication proxy, so the next bit for me would be a means of connecting to an IPSec/UDP Cisco VPN Gateway that works with my Domain username and then a fob generated password.
Any help from you guys would be most appreciated and perhaps I can share my ASProxy configuration for anyone wishing to get their's working....
Thanks
Avalon
Hi,
you can't use an OpenVPN client to connect to a Cisco (IPsec) VPN server.
If you want to connect to an OpenVPN server then you can use OpenVPN Installer and OpenVPN Settings from the market.
If you want to connect to an IPsec server then use the built-in android VPN client or even some proprietary Cisco client from the market... (don't know about these as I only use OpenVPN)
Hi, thanks for the reply, however the built in VPN client will not work with our server. There is a Cisco anyconnect client that does connect, but we need a license for it which we dont currently have.
I will keep trying....