Cisco VPN Client? - 8525, TyTN, MDA Vario II, JasJam General

My university uses the Cisco VPN Client for students to access the wireless network. Is there a Windows Mobile Application that will allow Cisco VPN?

I don't think so but I'm not 100% certain. It would be sweet if there was.

google eduroam securew2, and search you uni it pages.

You can use the inbuilt l2tp/ipsec vpn using certificates assuming they have configured the cisco concentrator at the other end correctly.

Related

Cisco VPN Client

Anyone know where I can find a Cisco VPN client for the wizard? Most of the Cisco site is password protected.
JRed
Are you needing a VPN that is XAUTH Compliant?
I'm not sure, I just know that on my PC that I have to use the Cisco client to login. The VPN host that I am trying to connect to is a Cisco VPN 3000 Series Concentrator (I think that is the model). So anything that works with this would be fine.

HTC TyTNII vpn to a cisco vpn

Hi,
I try to establish a vpn connection to our company-VPN.
VPN Gateway is a cisco device. "Normal" connection via notebook with cisco vpn client works.
On my TyTN i installed ncp client. But i dont know how to configure the cisco settings.
On Cisco VPN Client:
- IP Adress of Gateway
- Group Authentication
- Transport IPSec over UDP
On ncp VPN Client:
- IP Adress of Gateway is easy to find
But i cannot assign the other settings. NCP Client has a lot of settings.
Has anybody success to establish vpn connection via windows Mobile to a cisco Gateway ?
Got it. Not the vpn Client was the problem.
The Blackberry connect SW (disabled!) prevented connection via vpn.
Deinstallation of BB Connect und vpn Client from Bluefire works fine.
What did you use as the VPN client to connect into the cisco gateway?
Do you use a RSA secureID token?
I am tring to get a VPN connection running from my HTC p3600i, WM6.
New VPN Client
Since a few days i use another VPN Client: www.ncp.de
Works fine. We do not user RSA Token. Only Group Authentication (free string to identify groups) and XAUTH - user/password.
WinnieK said:
Since a few days i use another VPN Client: www.ncp.de
Works fine. We do not user RSA Token. Only Group Authentication (free string to identify groups) and XAUTH - user/password.
Click to expand...
Click to collapse
Can you write your settings? I can't configre this
Any ideas on a MPPE PPTP VPN via WM6? I have been trying to get this to work for months and can't. I am operating under the presumption that the VPN client in WM5/6/6.1 doesn't support MPPE and I am therefor up S#!T creek without a 3rd party dialer...
(It is a VPN connection to my work and yes as sorry as this is they still use an encrypted PPTP connection for all of their VPN connections. If they would just move on to something a LITTLE more current L2TP/IPsec I wouldn't be having any of these problems...)
But is there such a thing as a 3rd party PPTP VPN client for WM5/6/6.1 I haven't been able to find one...
TIA~
WinnieK said:
Since a few days i use another VPN Client: www.ncp.de
Works fine. We do not user RSA Token. Only Group Authentication (free string to identify groups) and XAUTH - user/password.
Click to expand...
Click to collapse
kindly can you show where to set the Group Authentication ?!!!
New(ish) Cisco AnyConnect VPN Client
Cisco have released an AnyConnect VPN client for Windows Mobile 5/6 (version 2.3.185). This is specifically targetted towards the ASA 5500 platform as the VPN server, however it should also work with IOS VPN devices (I am told?).
I haven't tried it, however I have seen it demonstrated and it all seemed to work.
Personally I prefer the integrated L2TP/IPSec VPN client and have posted previously on how to get this working with Cisco PIX 6.3, ASA/PIX 7.x and IOS devices.
Andy
AnyConnect VPN client will support only SSL VPN, that avaiable on Cisco ASA and IOS from 12.4(20)T or later.
Can I have two VPN connections to two different places on the same computer?
I work at two different medical facilities. I have a VPN connection to one and I'm trying to set up one for the other. When I'm in the New Connection Wizard and I pick "automatically dial connection", it makes me pick the medical facility that I already had on the computer to "automatically dial" when trying to create this new one.
cool vpn has given the users privilege to surf internet with freedom and security Thanks to VPN

SSL VPN on WM6.5?

...is it even possible? I'm running the latest NRG ROM on my Touch Pro 2, but I can still only find the "connections" applet to setup a VPN connection. The only choices are PPTP and IPSEC/L2TP.
Is there any way to establish an SSL VPN (SSTP) connection with WM6.5?
Thanks in advance.
You need your VPN gateway's vendor SSL client, such as Cisco AnyConnect Mobile. There's no native support for SSL VPN in Wm6.5.
stepw said:
You need your VPN gateway's vendor SSL client, such as Cisco AnyConnect Mobile. There's no native support for SSL VPN in Wm6.5.
Click to expand...
Click to collapse
This is just something I'm running on my own domain. I have no Cisco equipment.
I'm thinking it'll just be easier to set up IPSEC/L2TP in addition to my SSL VPN. I was hoping not to, though....

[Q] Cisco NAC authentication

At work we have a guest wifi that I have to use a Cisco NAC (Trust agent) client to authenticate through to to get Internet connection.
Any ideas of other ways to authenticate as long as Cisco NAC is Java and therefore not possible to use on Android? Thanks

[Q] [REQ] OpenVpn full solution for SGS2

Hi all,
I have been tinkering with connectivity into my corporate network and so far been able to get a connection to our Office Communicator server via ASProxy and a secure wireless connection. However I am looking for a solution that works across my 3G connection via a VPN.
I have looked at the market place versions of OpenVpn and I cannot get it to work with our Cisco Gateway. I got stuck at the tun and adb part, so not sure what I need to do at this point so though I would ask the experts on here ;-) There has been much work on a very important missing part which was a user authentication proxy, so the next bit for me would be a means of connecting to an IPSec/UDP Cisco VPN Gateway that works with my Domain username and then a fob generated password.
Any help from you guys would be most appreciated and perhaps I can share my ASProxy configuration for anyone wishing to get their's working....
Thanks
Avalon
Hi,
you can't use an OpenVPN client to connect to a Cisco (IPsec) VPN server.
If you want to connect to an OpenVPN server then you can use OpenVPN Installer and OpenVPN Settings from the market.
If you want to connect to an IPsec server then use the built-in android VPN client or even some proprietary Cisco client from the market... (don't know about these as I only use OpenVPN)
Hi, thanks for the reply, however the built in VPN client will not work with our server. There is a Cisco anyconnect client that does connect, but we need a license for it which we dont currently have.
I will keep trying....

Categories

Resources