HKEY_CURRENT_USER\SoftwareMicrosoft\Bluetooth\Settings\LocalName
Modify the string to your fancy.
Did not work with me at all
i have WM2003
BT
Reset your device.
Related
I was able to use my Garmin GPS 10 with my PocketPC with windows 2003 with no problem.
On my JasJar the Garmin Que (v2.70) does not detect the GPS. The JasJar is able to pair with the GPS 10 with no problem. I've got it on Outgoing COM8. Then in the GPS Control Panel I have program on COM7 and hardware on COM8.
In the Que s/w under Setup -> Interfaces I have only the following options:
- <Auto Detect>
- Serial on Cable COM1:
- Infrared Port
- Ir on COM3:
- RIL on COM6:
- COM7:
- QCT Data Interface
No matter what I select it does not detect the GPS.
I've logged the problem with Garmin, but I've not had any response yet.
Any assistance would be appreciated.
garmin gps10 & que working
hi,
you should find an earier entry from me on this, i manually put an entry into my registry listing com4, and on bluetooth setup the connection on com4, i could then see com4 in que. interesting since then the registry entry disapeared after a reboot but que and gps10 has worked ever since
Re: garmin gps10 & que working
sgordon said:
hi,
you should find an earier entry from me on this, i manually put an entry into my registry listing com4, and on bluetooth setup the connection on com4, i could then see com4 in que. interesting since then the registry entry disapeared after a reboot but que and gps10 has worked ever since
Click to expand...
Click to collapse
Thanks for the reply, but can you assist me by telling me which Registry entries you modified?
I recall on my pda2k there was a text file in the garmin que application folder that include the setup and port configuration, and if my memory serve me will just edit the file on your desktop for your port and reload it into your pocket pc overwritting the old one.
that is if my memory serves me will, sorry if it didn't.
obex2 said:
I recall on my pda2k there was a text file in the garmin que application folder that include the setup and port configuration, and if my memory serve me will just edit the file on your desktop for your port and reload it into your pocket pc overwritting the old one.
that is if my memory serves me will, sorry if it didn't.
Click to expand...
Click to collapse
I had a look in Garmin folder and it contains the GarminQue file, an error log, plus some other binary files. Unfortunately no configuration text file. :-(
Registry Key
Ok I found the registry key to mofify. Thanks sgordon for the pointer.
Go to HKEY_LOCAL_MACHINE/Drivers/Active/73
Make sure that the GPS is on Outgoing port COM4
Add a String Value:
Value name: Name
Value data: COM4:
Start Garmin Que and go to System Setup -> Iterfaces. There will be a blank entry in the dropdown list, choose that. The s/w should now see the Garmin.
For some strange reason the key disappears after a reboot, but the Garmin Que s/w is still able to link to the GPS.
Mapsource and Que on WM5
Ok now that I'm able to link my JasJar and the GPS10, then next problem that I have is that neither Mapsource nor nRoute detects the unit so I'm unable to transfer maps or waypoints to my JasJar.
I've tried to install the the Que on the device and on the SD Card, but no luck.
Any ideas?
Another Way
I was forced to reset my JasJar and after the reset the key described above was not available, but I found another solution.
Search in HKEY_LOCAL_MACHINE/Drivers/Active for one of the keys which has a value with Drivers\BuiltIn\GPSID
In this key the name is GPD0:
Change it to COM4: (if your GPS is on COM4
Then start Que and COM4: wil now be availble under Interfaces.
I also resolved my issue with the MapSource maps by telling MapSource to write the map directly to the SDCard (My notbook has a built in SDCard Reader). Thanks for the assist.
i did the same but i cant transfer the tracks and waypoints from wm5 to mapsource. Any clue?
Hi all,
Just a smalll question. I have installed MS Voice Command instead of this stupid software installed by default. Everything is working fine.
However, when I connect my bluetooth headset and I push the voice commande on it, I got the defaut voice command software which comes up instead of MS Voice Command...
Does somebody know what do I have to change to have MS Voice Command even with my headset ?
Thanks,
Mav
-----------------------
ROM 1.13.72 FRE
Radio 1.03.00
ExtROM 1.13.166 FRE
HI
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe
It workes fine
Hi,
Very nice thanks a lot,
Mav
Hi All,
I've got a few problems that I haven't been able to solve with the TyTn so far. Any suggestions are appreciated:
I can't seem to connect the terminal services client to any of my computers at home over wifi. I'm getting the "The connection to the server has timed out. Try connecting to the terminal server again." message. I can connect to remote desktop from any computer at home (or remotely via ssh). More befuddling is the fact that the TyTn can ping computers on the network (and access shared folders via total commander) and vice versa. I've checked to make sure that my connections setting and the wifi network are both set to the same network (tried both work and internet) and tried using both ip addresses and computer names to access the computers. I also had a look to see if the licensing registry key that caused problems with some handhelds under wm2003 existed (it doesn't).
Another thing I've been trying to figure out is how to customize the button on the bundled headset. My testing of MS VC with bluetooth yielded less than stellar recognition but the wired mic is very reliable and I would like to be able to use it in the car without touching the phone. I'd like to make the headset button activate MS VC instead of voice speed dial when held (I've done the listed steps to disable voice speed dial and replace it with MS VC but VSD still seems to be there and activate when I hold the headset button). I'm hoping there is registry key that controls this button but I haven't been able to locate one yet.
Finally, I would like to be able to add email addresses to poutlook that are the same ones used on my desktop and have them recognized as the same inbox and sync when the devices are synced. My brief look at the controls and the manual didn't seem to indicate a way to do this without exchange. Has anyone done this successfully (or know if it can be done)?
If you've gotten this far I owe you a thank you just for reading this post
I managed to enable the call button on my Jabra BT620 bluetooth stereo headset to start Voice Command - see global registry hacks in the XDA wiki. I assume it will work for a wired headset.
MS Voice Command activation from BT headset:
"Now this one is sweet and makes the JASJAR the daddy for voice commands.
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\?VoiceCMD.exe
Now, when you press your BT headset connect button, MS Voice command will fire up and take commands through the headset. It's reponses will be played through the headset too. "
I managed to enable the call button on my Jabra BT620 bluetooth stereo headset to start Voice Command - see global registry hacks in the XDA wiki. I assume it will work for a wired headset.
MS Voice Command activation from BT headset:
"Now this one is sweet and makes the JASJAR the daddy for voice commands.
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\?VoiceCMD.exe
Now, when you press your BT headset connect button, MS Voice command will fire up and take commands through the headset. It's reponses will be played through the headset too. "
I managed to enable the call button on my Jabra BT620 bluetooth stereo headset to start Voice Command - see global registry hacks in the XDA wiki. I assume it will work for a wired headset.
MS Voice Command activation from BT headset:
"Now this one is sweet and makes the JASJAR the daddy for voice commands.
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\?VoiceCMD.exe
Now, when you press your BT headset connect button, MS Voice command will fire up and take commands through the headset. It's reponses will be played through the headset too. "
Thanks for the reply ChrisNash,
The registry modification you refer to works for me as well -- with a bluetooth headset, however, the wired headset button still activates voice speed dial.
Terminal services client
Have you managed to get this to work yet as I've the same problem on my XDA EXEC??????????
This might be helpful for people who has problems to
find ActiveSync service while pairing phone to pc.
First you have to pair devices then go to registry on ppc:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Device
Find device key which points to your pc
( inside of the key, there's value "name" )
and write the key's name down.
Delete pairing between pc and phone either from bluetooth
settings or simply deleting the key which name your wrote down.
Then go to HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\ActiveSync
if there's any keys ( "folders" with hexadecimal numbers ), delete them.
Create new key named with the value you wrote down
and create two new values:
Nameriority
Type:REG_DWORD
Data:0
and
Name:RasEntry
Type:REG_SZ
Data:your pc's bt hostname
Now just try to make pairing again and ActiveSync service
should be appearing.
I had earlier working connection which crashed for some reason. And with this trick I managed to get it working again.
My phone is Elf and ROM i'm using is ShadoW 2.1 TE.
I hope this is useful for someone.
-Teemu
Hi all
How can I receive file via Bluetooth without PASSKEY?? And how can I make auto acceptance for the receiving?
My device is HTC HD2
Thanks
Still waiting
Can U help me
Receive Bluetooth Files Without Entering a Passkey
By default when a device which is not on your paired devices list is going to send you a file by BT OBEX Push, the BT manager requires a passkey. You can't disable this in the normal control panel but you can in the registry.
Go to HKLM\Software\WIDCOMM\BTConfig\Services\0002
Change Encryption from 1 to 0 (to not use a passkey)
Change Authorization from 1 to 0 (to receive all files without asking)
org thread : http://forum.xda-developers.com/showthread.php?t=583638
Thanks maklik
Its working