Hi all,
I have an Imate version recently upraged with Qtek ROM 1.66142FR...
Since this upgrade, I don't know why my device turn itself on about every one minute !? :shock:
Does something know this issue ? :idea: :?:
I searched for answers on those forums but it still difficult to find rigths word to define the problem !? ;-)
Please help...I'm going crazy !!!!! ;-)
Thanks all
Do you have Sprite Backup? If you do....I reckon thats your problem
Yes...I installed SpriteBackup !? Oh sh.... ! :x
How could I backup my device then if I cannot use SB ???
Just switch of Battery Monitor and Scheduled Backup and you should be ok. Just means you have to do it manually :|
Related
Hi,
after upgrading the radio,from qtek.dk/software my qtek
ask for sid code and then it freeze up??
I tried hard reset but it just show qtek and then freeze up?
Please help. Hope you all there be sure it is the right rom
upgrade before going ahead. Dumb thing didnt say the rom
wasnt comparable etc. now I and I beieve few of us have been
stuck with a frozen device that doesnt work no more.
Hope those who have the sme problem corrected can help .
Thank you. Urgent reply please.
Yep upgrade ROM First then Radio for more information check the ROM Section in the Forums or http://xda-developers.com/rom/
:wink:
Hello,
I know, i am not the first one with this problem and i read many threads but i am not clearly understand the way (if there is a way) to fix my problem.
After updating my german xda Device i restarted and have been promped to enter my Pin, but the screen is frozen. So i did first a soft and after this a hard reset. Now after every hard reset i see the the O2-bubbles for some minutes and then the white screen with the blue bar on the top. Nothing is working.
I i wait for 10 or 20 Minuten the bubbles coming back - same game everytime.
I tried to enter the bootloader while holding the Power-Button while soft-resetting. BootLoader is seen, but shows a "gsm error".
I can not establish an active-sync-connection via USB-Cradle.
What can I do to rescue my XDA? Is there any possibility or can i put it to trash?
Any advice is very welcome!
Thanks!
Miwu
Dear all,
I am facing the same problem (XDA ROM update crashed) as miwu now . Can any expert teach me how to solve this problem by myself :?: or I need to let O2 engineer to fixing it :!: .
Thanks a lot !
Please HELP !
Dear all,
I can't get the white screen with the blue bar on the top because I am using 02 xda ver 4.00.11 (PPC2003), so that I can't use the repair.zip to fix it.
Any expert can to teach me how to fixing it by myself ?
Thanks !
Hi,
after half a night i fixed my described problem with the gsm-error in the bootloader.
I will post my solution in a new thread today in the afternoon.
Thanks to XDA-Developers for this great forum, its very helpful.
Thanks and regards from Berlin!
Miwu
Miwu,
That's great for you !
BTW, do you using PPC2003 as well ?
Hope to see your solution soon !
Thanks ! :wink:
Hello,
just posted my solution in a new thread
http://xda-developers.com/phpBB/viewtopic.php?t=2489
take a look there.
We first tried to fix it using 2003-SD-Flash but it become buggier, the pling-sound does not played, so we flashed back to PPC2002 and made it as described in the new thread!
Hope, you can flash CE with an PPC2002, maybe it helps, but I do not really know. Simply try or not!
Best regards from Berlin!
Miwu
I will try but I don't think it will work on mine because I am using bootloader v5.17 . Anyway, think for your help !
Best regards ! :lol:
i use a mini with the qtek 1.11 rom
i recently installed the wisbar (latest version)
but it makes my mini very slow and doesnt show any incoming calls or messages !!!!!
can someone suggest another software like this one ??????
or can something be done about this !!
PLEASE HELP
assure that you have the latest Wisbar advance installed for SMS-Incoming calls bug corrected.
well i downloaded the latest one from the website that is the wisbar advance 2.0.1.10
i had the crack so registered it too
can u tell me where to find the version in which the bug is corrected or if there is some patch ???
PLEASE HELP .. I REALLY NEED IT
THANKS
tunx said:
i had the crack so registered it too
Click to expand...
Click to collapse
that not fun :roll:
the version that works with PPCPEs is the latest beta. check out lakeridge's forums.
hmmmm
ok boss
will check it out then ...
u have left me with no choice ..... :?
will let u know of my endeavour
got it man
thanks a lot
appreciate it
Wisbar advance works fine with my mini..
the latest wisbar advance is 2.0.1.30
hey guys thanks for being helpful alot of times..
My O2 XDA MINI S gets stuck at the startup operator logo ..
I FLASHED IT WITH THE NEW 2.21.4.1 ROM AND OS ,, but its still the same
NOW IM TRYING TO FORMAT IT WITH A HARD RESET BY PRESSING THE SEND BUTTON ,,BUT IT SAYS "FORMAT FAIL"..... Please help me as i really miss the phone..
I am afraid that usually means you have a faulty rom memory chip. Send the device back to the supplier for repair - its a hardware problem not a software problem.
Thankz for the reply ....
BUT IF ITS A hardware fault how was i able to flash it to the newer version ? 2.21 ?
Is there any thing else i can do to the phone ? to make it ? LIKE THE IMEI OR SOME KIND OF LOCK ?
help would be appreciated !!
simlockboy said:
Thankz for the reply ....
BUT IF ITS A hardware fault how was i able to flash it to the newer version ? 2.21 ?
Is there any thing else i can do to the phone ? to make it ? LIKE THE IMEI OR SOME KIND OF LOCK ?
help would be appreciated !!
Click to expand...
Click to collapse
The rom will flash but stll fails to boot - there have been other posts with exact same problem and that was the reply by summiter or faria if I remember right. (Both v experienced at flashing and putting together roms) Do a srearch - failed format will prob find those posts.
alright i will research and get back .... thankyou very much .. appreciate your help
I DID ALOT of researching and got this.. please see it im sure everyone will need it some time.... and please advise me on what to do next ..my email is
[email protected]
if you have a os dump of a O2 XDA MINI S .. please mail it to me
Regards
ive heard if I can upgrade the phone through the SD CARD then it can get back to normal ..
Please some one can be kind enough to guide me through it or mail me the dump of the os for the sd card.. O2 XDA MINI S
Me too ! The same to you !
simlockboy said:
ive heard if I can upgrade the phone through the SD CARD then it can get back to normal ..
Please some one can be kind enough to guide me through it or mail me the dump of the os for the sd card.. O2 XDA MINI S
Click to expand...
Click to collapse
I had and now I can't do anything, so hope somebody help us, try to find out how to save ourlife's !
Pls help us !
ps: My' mobile is T-Mobile MDA
Me too ! The same to you !
Pls Mod delete it for me ! Thanks !
formate failed
i have o2 1.5.4.2
ipl spl 1.05
flashed with lauch rom
steel same
whats a problem...
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Ok first download a proper ROM for your SP3.
I think you can use the procedure as when you want to revert to wm2003 on this tread:
http://forum.xda-developers.com/showthread.php?t=279464
Thanks !
Hi,
Thanks a lot buddy ! but the said procedure only works if the phone is atleast in the bootlaoder mode (i,e the tricolour mode) but as I said mine is almost completely dead (no lights when charger or the usb is connected and not powering on,I mean not even the LED glows) !!!!
So Am kinda stuck in this stage ! so I need a real trick to some how gain access to the ROM and flash it completely and install the proper one ( I mean I have to erase the EEPROM completely !)
Its similar to the one in the post #8 in the link you've sent !! and the answer to it in post is what I don't want to hear !!
Anyways thanks for quick reply man ! really appreciate it !
Regards.
Hi, are you solved your problem with your phone, if not i can help you, Wright me to PM...
P.S. For all Who unlock his phone via Imei-check, please send me your used "Key file"...
charge ur batire an tray agin baby
and tel me morrrr
handsome1_blr said:
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Click to expand...
Click to collapse
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
defcomg said:
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
Click to expand...
Click to collapse
Wright me to PM...
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
defcomg said:
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
Click to expand...
Click to collapse
For what you want use jtag-pinout-detection? Links on this site are dead, and hear you can find Jtag pins for Typhone: http://forum.xda-developers.com/showthread.php?t=414103