Hi!
I have a problem when I tap with my finger the numbers from 1-9 for speed dial. Instead of making call it writes the number. I have to tap with the fingernail to call in this manner.
I think that the problem is in the regulation of time of tapping the number, but I don't know how to regulate it.
Thanks for the solutions.
Regards,
Uros
keep the button pressed until you hear a beep and the nummer gets dialed.
Yes, thats difficult when driving 8)
Related
Hi,
Anybody knows if there is software to AUTO REDIAL a number found busy, like most cell phones do?
(Or maybe there is some settings that I am overseeing?)
Thnx
just press the green button twice, that dials the last dialed number again, as i keep doing it by mistake
Carnivor said:
just press the green button twice, that dials the last dialed number again, as i keep doing it by mistake
Click to expand...
Click to collapse
Thnx for the reply, but I meant AUTO redial. Like it is on any other cell phone (you don’t need to intervene since it will redial on its own till the number becomes available again)
:wink:
...
http://www.pocketmax.net/redial.html
on the right hand side of my Vario, i always press it by accident when picking up the phone and it makes that horrendous beeping noise, then I have to close it down.
Is there software to make the button do nothing when pressed?
dougsdir said:
on the right hand side of my Vario, i always press it by accident when picking up the phone and it makes that horrendous beeping noise, then I have to close it down.
Is there software to make the button do nothing when pressed?
Click to expand...
Click to collapse
Buttons from Settings menu is where I'd start
Steven
simple eh? ta
Disable Cyberon Voice speed dial app completely?
I have a rom that came with that app, and I hate it with a passion. everytime I try to use MS Voice command to dial to dial a number with my bluetooth it interferes. anyone know how I can make it not work other than switching rom... I like this rom.
After I enter the phone number and press the call key, the keypad disappears and I have to tap the left bottom key on the screen to resume the keypad. Can someone advise me how to retain the keypad all the time as I need the keypad frequently while making a call.
Thanks!
Don't dial a number! sorry bro..don't know a work around for that! guess the idea is to have the 'In-call' functions on screen as soon as u place a call! Cheers
This has been happening to both me and my brother's phones for a while. my phone has dcd3.20 and radio rom 3.42.50 My brother's phone is dcd 3.16 with one of the earlier gps enabled radios. we use whatever was the stock dialer for those kitchens. We are both on sprint. yes we should update to the newest rom/radio.
say I wanted to dial a contact named Miranda, so I push the green phone button, dial 6(m,n,o) ,4 (g, h, i) on the keypad and that narrows it down to 1 contact named miranda in this case, I push the green phone button and my phone will make a call. and then when the other party picks up I find out that I called the wrong number.
I swear this morning I even watched the status and it said, "dialing miranda" and showed her number, but when I connected I found out I had the wrong number and then looked at the call status and it displayed someone else's number (this time a number that is not in my contact list, does not contain the numbers 64, and probably not in my last 10 calls)
There have been other cases where dialing the first two or three letters of a contact's name narrows the contact list to a few contacts, then I might use the up or down on the nav button to select the right one and then push the green phone button to dial. And then my phone will call the wrong person, sometimes it calls someone that was not on the narrowed down contact list.
has anyone else had this problem?
This happens to my phone (DCD 3.20) and my bosses phone (DCD3.25) occasionally. I would say for me, it happens my 1 out of 50 times. It will be when I dial a number I have never dialed before--I will type in the complete number, hit send, and then the phone will dial something close to the number from my contacts.
I also have this problem as well with 3.2.6
I was trying to dial a pizza and it had the first 6 digits the same as a AC company I called the same day. I could not get it to dial the right number - even though like you say, it says it is. In the end had to use a friends phone. Only time it has happened to me though.
same
I often experience the same problem.
The way around it is to press the name of the person you want to dial before pressing the green dial button.
I.E. click on the name in the list- EVEN THOUGH it is already highlighted.
works for me.
Still a pain in the ass though.
I believe it has to do with the touch dial skin and smart dialing.
I have the same error on the stock sprint rom with the touch dialer skin installed.
I have also had this isue on multiple versions of DCD roms... not sure if the VZW rom had the issue was I was not on long enought to find out. I ended up calling my bosses cell one night at 1 am.... woops!
I have also had this problem as long as i can remember.
Here is an example to add to the list.
try to dial *72
you cannot simply just dial that.
It will dial the next closest number.
It will only work if I disable smartdial.
Go figure.
Same here. I will type the first two digits on someones name and number and it will only dial those digits even though I selected the name from the list before pushing call.
Clicking on the name just works some of the time. I thought I was going crazy...
So is this a random problem or can it be reproduced? Any of you cooked a DCD rom with the mogul dialer and noticed the same problem?
I hope we can figure out if this is a problem with the dialer or Smart dial itself?
I always get a 10 digit number dialed (from 2-3 digits pressed for smart dialer) , whether or not it is the number I want dialed is another issue.
don't know if there is a way to reproduce it, since it happens only occasionally.
this has been happeneing to all my 6900 users and its driving them/me nuts.
anyone know why its doing this or what a solution mght be?
Dito...
I had the same problem yesterday when trying to get to the EPST screen. The first time I dialed ##778# and realized that I didn't need the ending #. When I put in JUST ##778, it would still try to dial the one I already dialed. I had to delete it from my recent list to get into the menu.
Jon
kept happening over and over the other day again when trying to call miranda from my phone by using the smart dial keypad 6-4. noticed it is dialing 612-599-xxxx instead of her contact number. 612-599-xxxx is the first number that pops up when i just push 6, pushing 4 narrows it down to miranda in my contacts but the phone still dials the first choice for only pushing 6.
so it seems like the smart dialer display is a step ahead of the dialer?
When I make a call the screen goes black and is nonresponsive. Call to Voice mail and I cannot see the number pad for entering code, and cannot use the End Call button either. When making a call to anyone, I cannot use the End Call button. Everything is great in the Contacts and Dialer, until the call starts to dial. Then goes completely balck and non responsive, almost as it detached.
Has anyone any experience with this problem and found a solution?
Thanks
aaCharley said:
When I make a call the screen goes black and is nonresponsive. Call to Voice mail and I cannot see the number pad for entering code, and cannot use the End Call button either. When making a call to anyone, I cannot use the End Call button. Everything is great in the Contacts and Dialer, until the call starts to dial. Then goes completely balck and non responsive, almost as it detached.
Has anyone any experience with this problem and found a solution?
Thanks
Click to expand...
Click to collapse
Perhaps an issue with the light sensor? The phone thinks its up to your head?
Stock ROM?
Settings / Display / Screen Timeout
Settings / Call Settings / Show Dialpad / ...
Sent from my unrooted DroidX using Tapatalk
Screen goes black on call dial
aaCharley said:
When I make a call the screen goes black and is nonresponsive. Call to Voice mail and I cannot see the number pad for entering code, and cannot use the End Call button either. When making a call to anyone, I cannot use the End Call button. Everything is great in the Contacts and Dialer, until the call starts to dial. Then goes completely balck and non responsive, almost as it detached.
Has anyone any experience with this problem and found a solution?
Thanks
Click to expand...
Click to collapse
Did you find a solution? I just ordered and received a Star Note 3 from Merimobiles and have the exact same issue. I have to take the battery out in order to get it to disconnect the call. I think that the light sensor must be messed up because I'm also having an issue with the backlighting on the soft keys on the front of the phone. Of course, I can't really verify if there is even backlighting on these keys, but it seems like a really bad oversight if there is none.