Related
I have for a long time been looking for software updates for my O2 XDA (I have ROM 3.02.00 ENG and radio version 4.01), but with no luck.
Now I have noticed new software for free download for the Qtek 1010, apparently ROM 3.16.13 ENG and radio 3.19.01 (should this be 4.19.01?)
Is it possible to use these 2 files to update the software?
As my O2 XDA is unlocked, I wonder whether updating the ROM and the radio version will have any effect on the unlock, i.e. could the phone change to locked?
Best regards
Amoll
amolldk said:
Now I have noticed new software for free download for the Qtek 1010, apparently ROM 3.16.13 ENG and radio 3.19.01 (should this be 4.19.01?)
Click to expand...
Click to collapse
Where have you found these files!?!? I have a Qtek, but haven't heard anything about no upgrade. You bet I'm interested!
/b
Can be found for download on these sites:
http://www.idedata.no/
http://www.klingtech.dk/produkter/Qtek-1010.php
I am still curious whether this upgrade can be used for O2 XDA.
Anyone for a test?
Best regards
Allan
It's working! I just upgrade the radio rom from 4.16 to 3.19.01.
Sound more like a downgrade then a upgrade. :lol:
Did you also did the winCe rom upgrade?
Don't look at the first number in the OS or radio versions, it denotes region. 4.16 is an older version than 3.19.
Was the upgrade done on a Qtek 1010 or a XDA?
Amolldk
Hi
Anonymous said:
Can be found for download on these sites:
http://www.idedata.no/
http://www.klingtech.dk/produkter/Qtek-1010.php
Click to expand...
Click to collapse
They only say, somthing about sending the OS via eMail. It seems, that there now downloads left ...
Has somebody got that Download and is willing to share it with us ??
Thanks
The image can be downloaded on the first site...
however, I have just reflashed my XDA/MDA with the older irish ROM, it has plenty more features than this one, GPRS standby and ISDN call type.
Don't trust the version numbers
Zviratko said:
The image can be downloaded on the first site...
however, I have just reflashed my XDA/MDA with the older irish ROM, it has plenty more features than this one, GPRS standby and ISDN call type.
Don't trust the version numbers
Click to expand...
Click to collapse
Where is the Download option for the Radio Version on the first side, I can´t find it.
http://www.idedata.no/support/support.asp?ID=299
SladeHammer said:
Where is the Download option for the Radio Version on the first side, I can´t find it.
Click to expand...
Click to collapse
Think this might be more usefull http://www.idedata.no/programmer/ce316upgrade.zip For CE
And for the radio
http://www.idedata.no/programmer/radioupgrade.zip
Please note you must first upgrade the CE version then the Radio...upgrading the radio only can cause problems
NoBackUp said:
SladeHammer said:
Where is the Download option for the Radio Version on the first side, I can´t find it.
Click to expand...
Click to collapse
Think this might be more usefull http://www.idedata.no/programmer/ce316upgrade.zip For CE
And for the radio
http://www.idedata.no/programmer/radioupgrade.zip
Please note you must first upgrade the CE version then the Radio...upgrading the radio only can cause problems
Click to expand...
Click to collapse
You are wrong, the Radio update goes first and patches WinCE.
btw. don't use the update, really, use the Ireland O2 update ROM.
Strange file after updating
I have upgraded my Qtek using
http://qtek.dk/software/upgrades/316-CE-update.zip
http://qtek.dk/software/upgrades/Radioupgrade.zip
I performed all the instructions correctly and my pocket pc now has the
upgrade. However, in the remove programs, there is a file called HTC RSUupgrde.
I dont know I don't have to remove this or should it actually be there on my pocket pc? What happens if lets say I have to do a
hard reset and I lose this file?
Any suggestions? :?:
[email protected]
How to use FM in India
Hi,
My frnd has gifted me a O2 XDA Orbit.....I bought this from UK...BUT I am not able to listen fm in India.....
Please help me.......
Also plz suggest me some website to get some games, software for O2 XDA Orbit.....
Thanks in advance
Sam
hi all!
i just upgraded to ppc2000 /version 4.00.01 eng on my austrian t-mobile mda.
that does work. but as i tried the earlier version of it (imho 3.xx) before i think that connecting to gprs was WAYS faster. so i thought of up/downgrading my radio stack which is 3.16 at the moment.
some ppl are saying they use version 4 or even 6... BUT: can i use them as well? what are the limitations ???
here we use gsm 900/1800 so i guess any us-att stack that is meant for 1900 won't work, right?
so: what version to use, and what do you suggest?
and one more Q: upgrading OS does NOT upgrade the radio stack, right?
pls anybody confirm.
thanx!
regards ize|man
and one more Q: upgrading OS does NOT upgrade the radio stack, right?
Yes, that is right!
nq said:
and one more Q: upgrading OS does NOT upgrade the radio stack, right?
Yes, that is right!
Click to expand...
Click to collapse
As long as you are using a cooked ROM, or .nbf file on SD card ... be careful as some opertors' upgrade contains both RSU and ROM update in one exe file!
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.
Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....
Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:
Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx
Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...
faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.
T-Mobile Germany has annouced the release date for the Windows Mobile 2003 ROM for the XDA I as December 29th. Hopefully T-Mobile USA will announce something similar today. :roll:
http://www.t-mobile.de/mda/software/1,5193,7482-_,00.html
But this is only for German Model, isn't it?
hmmmm ... and how about the language version ?!
to me seems like only German is to be available ... too bad
Release date is now beginning January
Hope there will be an update....
Regards
Stefan
aren't we talking about the German version of WM2003 ..
announce/release date or in general WM2003 official release for T-Mobile ??
regards,
monika
http://www.t-mobile.com/promos/ppc2003/
this link was working few weeks ago with information about update but now seems to be dead.... somebody spoke with customer service and they said "in the middle of February" so we will see...
for me 4.01.00 ENG work fine
ps. pozdrawiam rodaczke
well, maybe there has been some minor problems ...
with that ROM release so they've decided to stop distributing for a while, hard to say ...
I presume as official release is hopefully coming with a short notice stick with current version I have
regards,
monika
ps. rowniez witam i pozdrawiam
somebody wrote that 4.01.00 ENG is only good to US tmobile ppc owners because of radio ... I mean only for PW10B1 units ...
I did reflash mine yesterday with this version and I like it so far .... signal indicator doesn't look normal because I dont have signal but my ppc recives calls normally ....
mine XDA is also PW10B1 .... heh
now I know for sure that I have US version, thank you for the tip ...
dziekuje i pozdrawiam,
monika
ps. out of curiosity, have you already get my private message ???
HI Monika,
Where did you get this T-Mobile WM2003 ROM?
Is it English version?
Can it be used in Asia?
Many thanks,
chris_khho said:
HI Monika,
Where did you get this T-Mobile WM2003 ROM?
Is it English version?
Can it be used in Asia?
Many thanks,
Click to expand...
Click to collapse
hello, I got it from http://www.yorch.net/ but I use an US version of XDA, for me it's hard to say whether it suits Asian hardware version, my rough guess is that Radio Stack version shall be different .... unfrtunately I have never came across the Asian hardware version
but before making any upgrades read that forum, e.g.
http://forum.xda-developers.com/viewtopic.php?t=4630
and also the other threads just to double check
regards, monika
Tks Monika,
But I see that you are using WM2003 T-mobile ROM 4.00.21.
From Yorch, 4.00.21 is only nbf file which is not nb1 so that I can't use the SD method for upgrading.
Any hint?
Marcyjok said:
somebody wrote that 4.01.00 ENG is only good to US tmobile ppc owners because of radio ... I mean only for PW10B1 units ...
I did reflash mine yesterday with this version and I like it so far .... signal indicator doesn't look normal because I dont have signal but my ppc recives calls normally ....
Click to expand...
Click to collapse
i have PW10A1 and i installed the v4.01.00 tmobile update i just downloaded an cooked rom from yroches kitchen then unzipped it all and replaced the nbf file from the v4.01 over the cooked rom nbf and flashes it that way works fine on english netowrks and i still have 900/1800 mhz just what ever you do do not go into phone options and click on the band tab if you do you will loose 1800mhz bank and then be on 900/1900 if you do this load up the bootloader click the calendar button and click on gsm 900/1800 and itll say reset or some crap do this then softreset and youll have 900/1800 back again but dont click on the band tab or youll have to do this.
gaz
p.s ive found it to be quite stable so far but seems to run kinda slower then v4.00.11 but it has improved features
hi
few questions
I have US tmobile Pocket PC Phone so it is type B so I flashed with no problem with 4.01.00 (RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe) so I think that this soft will work fine with Monika's XDA if it is American....
Monika your XDA is from AT&T ? or TMobile ?
Is it ok to use it with European PW10A1 ?
gaz do you have exactly same ROM as I have ? (check my signature)
and this problem with band tab is only one ?
do you see TMobile logo when U do a soft reset?
Anybody use this soft ver. in Europe?
i use 4.01.00 with asian radio stack 4.21.01 with no problem
i used flash method when upgrading the rom
i unzip the exe file, took the .nbf file and write it to my sd card using OSImageTool and boot my xda with the SD card... 5 minutes later my XDA is running WM2003 with the latest ROM version :lol:
for asian users, do not open the band tab... if you do that, you have to go to bootloader and choose band 900/1800 to make your xda work again
Marcyjok said:
hi
few questions
I have US tmobile Pocket PC Phone so it is type B so I flashed with no problem with 4.01.00 (RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe) so I think that this soft will work fine with Monika's XDA if it is American....
Monika your XDA is from AT&T ? or TMobile ?
Is it ok to use it with European PW10A1 ?
gaz do you have exactly same ROM as I have ? (check my signature)
and this problem with band tab is only one ?
do you see TMobile logo when U do a soft reset?
Anybody use this soft ver. in Europe?
Click to expand...
Click to collapse
I have an US version of XDA with T-Mobile ROM installed ... and it's T-Mobile ppc pe, radio 4.21.00 and protocolversion 32S54
regards,
monika
Hi Toshiro,
I am a bit confused. The 4.00.21 nbf file from Yorch cannot be used by OSImageTool since I tried that before and confirmed by someone else in this forum. He said only nb1 file can be used for SD method.
Also, where did you get this 4.01.00 ROM?
Thanks v much.
chris_khho said:
Hi Toshiro,
I am a bit confused. The 4.00.21 nbf file from Yorch cannot be used by OSImageTool since I tried that before and confirmed by someone else in this forum. He said only nb1 file can be used for SD method.
Also, where did you get this 4.01.00 ROM?
Thanks v much.
Click to expand...
Click to collapse
Use XDArit.exe insted of the OSImageTool and you can write it to an SD card. www.yorch.net has 2 versions. if the newer one doesn't work, try the older one. I also found I have to unplug my cradle from my computer to get XDArit to work properly.
MrDollyMaker
the best places worth trying
http://forum.xda-developers.com/viewtopic.php?p=21147&highlight=#21147
and also
ftp://tmobile:[email protected]:21
regards, monika
Thanks v much.
But that's integrated with the us radio which is not suitable for me.
ok fellas ...
i went from :
rom version: 3.17.03 ENG
rom date: 5/15/03
radio version : 4.17
to the upgrade :
rom version: 4.00.16 ENG T-Mobile US
rom date: 7/10/03
radio version : 4.17.00
courtesy of www.yorch.net
however the phone still can not pick up a signal ..
with upgrade i have not been able to switch GSM band from 900/1800 to 900 or 1900 successfully through the wallaby bootloader (after changes are made i can not get out of bootloader without doing a hard reset) also note the xda developers band switch tool is also present but reads error
also note
before the upgrade
my device model no. PW10A1
after upgrade
my device model no. PW10B1
not sure if im getting any closer to the solution but im still happy at this point i havent burned up the unit ...
perhaps it is still an issue of the radio version 4.17.00 (which is the only thing i havent fooled with yet)
any thoughts on trying the radio upgrades from www.yorch.net (under upgrades) ??
if this doesnt kill me it will surely make me stronger ... i will throw a party with beer for everyone if we can get this turkey running !!
thanks again folks !
Have you tried removing sim card prior to gsm switch in bootloader then reinserting after reboot?.
yes i have tried that as well ...
still no luck :?
eurowerks said:
yes i have tried that as well ...
still no luck :?
Click to expand...
Click to collapse
I had a similar problem on one of the units I have. It ended up that I had to redo the radio to get it working again. The radio from yorch's should be fine.
TMO 4.10.00, RS 6.24.01
I upgraded my XDA I with this .exe file and everything went perfect. Search this forum on RUU or 4.10.00 and you should find the link to the file (~18M). TMO is pretty much locked on ROM4.10.00, Radio 6.24.01 still needs some work, still having problems only with NorTel Networks equipment. Hope this helps you.
Filename to look for:
RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe
TMO 4.10.00, RS 6.24.01
I upgraded my XDA I with this .exe file and everything went perfect. Search this forum on RUU or 4.10.00 and you should find the link to the file (~18M). TMO is pretty much locked on ROM4.10.00, Radio 6.24.01 still needs some work, still having problems only with NorTel Networks equipment. Hope this helps you.
Filename to look for:
RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe
TMO 4.10.00, RS 6.24.01
I upgraded my XDA I with this .exe file and everything went perfect. Search this forum on RUU or 4.10.00 and you should find the link to the file (~18M). TMO is pretty much locked on ROM4.10.00, Radio 6.24.01 still needs some work, still having problems only with NorTel Networks equipment. Hope this helps you.
Filename to look for:
RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe
ROM: 4.01.00 ENG
Radio: 6.24.01
it is my dream ... no mission at this point to find this upgrade .... can anyone point me in the right direction? :?
thanks
Your "mission"
Your mission should be to practise with the search buttom associated with the Upgrading It forum, at top of page next to FAQ button, to find what you're looking for!
thanks for the mission co ordinates .. but i have actually tried the search option believe it or not ... before i posted ... also have tried the link via the ftp that was suggested .. just cant seem to located it ...
stumped :?
Hi eurowerks !
You can download from my ftp server.
ftp://pdabolt.homeftp.net
user:som
pass:som
sebi ...
hello and thank you ... still cant access the folder ... it says something like windows cant access the folder ... be sure i have epermission to access ... just cant understand how ive come so far and im so close ... i am new to this so im sure im just not getting something right ... i do appreciate the offer .. thanks .. ill keep trying
Hey eurowerks you need to use a program like CuteFTP or WS_FTP LE
to get to this site as well!
CuteFTP can be found at:
http://www.cuteftp.com/downloads/cuteftp.asp
WS_FTP LE can be found at:
http://www.ftpplanet.com/download.htm
HTH
thanks a bunch qman ...
the ftp download was a success
i am now running ..
rom : 4.01.00 eng
rom date : 10/27/03
radio version : 6.24.01
still no luck with it picking up a signal for the phone ... i have removed the sim ... and even switched between 900 and 1900 and still cant get a signal ...
any ideas? anyone ... please :?
It might be your SIM card so try it in another phone and see if it works.
If so try upgrading to the AT&T Radio stack its what I use.
HTH
i really cant believe it is the sim as it works fine in my other phone .. so i tried to do the radio uprade ...
from 6.24.01
to a.20.10
i was a bit skeptical as it is an at&t stack and i am using t mobile usa ..
dloaded it from yorch ... opened it in the windows directory of the xda as they say ... and it says something like upgrade failed.. press ok to restart
:?
says to be sure the path is correct and none of the files are missing ... perhaps there is something i am missing ...
also wondering how dangerous this radio upgrade is ... been reading some horror stories about others that have ruined their devices trying the upgrades .. but after all this is the 3rd rom ive installed so i figured what could a radio upgrade hurt ... anyways .. still no luck ..
eurowerks said:
i really cant believe it is the sim as it works fine in my other phone .. so i tried to do the radio upgrade ...
from 6.24.01
to a.20.10
i was a bit skeptical as it is an at&t stack and i am using t mobile USA ..
dloaded it from yorch ... opened it in the windows directory of the xda as they say ... and it says something like upgrade failed.. press ok to restart
:?
says to be sure the path is correct and none of the files are missing ... perhaps there is something i am missing ...
also wondering how dangerous this radio upgrade is ... been reading some horror stories about others that have ruined their devices trying the upgrades .. but after all this is the 3rd rom Ive installed so i figured what could a radio upgrade hurt ... anyways .. still no luck ..
Click to expand...
Click to collapse
Confirming you copied all of the below files to your Windows root folder
RSUpgrade.exe
RSUpgrade.cp64
monitor_ul_bs.map
monitor_ul_bs.m0
and the upgrade still failed with a be sure path is correct and none of the files are missing? BTW your old radio stack is still in tact since it failed in
this way. Just remove any leftover upgrade links from your Startup folder.
How dangerous is upgrading the radio stack you ask? Its the most dangerous upgrade you can do in my book and should be only do as a last resort in getting your phone to work.
Also I can understand why you're skeptical as to it being an AT&T radio stack, most are but its the most powerful radio stack to date in my book and I've used them all (US that is). Your device must really be in bad shape to knock it down! :shock:
BTW what part of the US are you located?
HTH
Confirming you copied all of the below files to your Windows root folder
RSUpgrade.exe
RSUpgrade.cp64
monitor_ul_bs.map
monitor_ul_bs.m0
yes the above files were all copied to the windows folder of the xda .. not too sure about what u mean by root folder ... but they were opened within the windows folder ... :?
i did remove the files after it failed .. perhaps i should just be happy the pda works and it powers on ... :lol:
anyways im here on the east coast (nyc) .. lemme know if anyone comes up with anything else ... also wondering ... has anyone tried the upgrade from the siemens web site ?? i think it is something like A.20.17 .. im assuming it is a radio upgrade as well ?
question re. radio upgrades ..
is performing the upgrade by opening the exe file on the device standing alone the risky part? :? since upgrading the rom also has the radio upgrade within it and it is done while connected to the pc on the cradle with activsync perhaps that makes it safer ... ??
eurowerks said:
also wondering ... has anyone tried the upgrade from the siemens web site ?? i think it is something like A.20.17 .. I'm assuming it is a radio upgrade as well ?
question re. radio upgrades ..
is performing the upgrade by opening the exe file on the device standing alone the risky part? :? since upgrading the rom also has the radio upgrade within it and it is done while connected to the pc on the cradle with ActiveSync perhaps that makes it safer ... ??
Click to expand...
Click to collapse
The A.20.17 upgrade contains both ROM and radio stack upgrade. The ROM is AT&T's most current Pocket PC 2002 update.
As far as the radio stack failure goes it can happen either way but its best not to have your device connected to the PC while doing it though!
HTH
Hey guys ...
The point is what is the actual type of the device A or B. Forget what's is shown in the device info as it can ve changed buy a wrong ROM or RSU upgrade. Refer to the device sticker in the device back side. If the device is A type then it's only 900 or 900/1800 type ... don't ever try to switch to any 1900 option as it may ruin the Radio part. If it's B then you can select the 1900 if your network supports this band. Don't forget also to switch it in the phone settings since now you have 4.01.00.
As Peter Poelman said, try to select the right band from the bootloader and soft reset more than once. Usually it takes many trials.
Good luck ...