ok fellas ...
i went from :
rom version: 3.17.03 ENG
rom date: 5/15/03
radio version : 4.17
to the upgrade :
rom version: 4.00.16 ENG T-Mobile US
rom date: 7/10/03
radio version : 4.17.00
courtesy of www.yorch.net
however the phone still can not pick up a signal ..
with upgrade i have not been able to switch GSM band from 900/1800 to 900 or 1900 successfully through the wallaby bootloader (after changes are made i can not get out of bootloader without doing a hard reset) also note the xda developers band switch tool is also present but reads error
also note
before the upgrade
my device model no. PW10A1
after upgrade
my device model no. PW10B1
not sure if im getting any closer to the solution but im still happy at this point i havent burned up the unit ...
perhaps it is still an issue of the radio version 4.17.00 (which is the only thing i havent fooled with yet)
any thoughts on trying the radio upgrades from www.yorch.net (under upgrades) ??
if this doesnt kill me it will surely make me stronger ... i will throw a party with beer for everyone if we can get this turkey running !!
thanks again folks !
Have you tried removing sim card prior to gsm switch in bootloader then reinserting after reboot?.
yes i have tried that as well ...
still no luck :?
eurowerks said:
yes i have tried that as well ...
still no luck :?
Click to expand...
Click to collapse
I had a similar problem on one of the units I have. It ended up that I had to redo the radio to get it working again. The radio from yorch's should be fine.
TMO 4.10.00, RS 6.24.01
I upgraded my XDA I with this .exe file and everything went perfect. Search this forum on RUU or 4.10.00 and you should find the link to the file (~18M). TMO is pretty much locked on ROM4.10.00, Radio 6.24.01 still needs some work, still having problems only with NorTel Networks equipment. Hope this helps you.
Filename to look for:
RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe
TMO 4.10.00, RS 6.24.01
I upgraded my XDA I with this .exe file and everything went perfect. Search this forum on RUU or 4.10.00 and you should find the link to the file (~18M). TMO is pretty much locked on ROM4.10.00, Radio 6.24.01 still needs some work, still having problems only with NorTel Networks equipment. Hope this helps you.
Filename to look for:
RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe
TMO 4.10.00, RS 6.24.01
I upgraded my XDA I with this .exe file and everything went perfect. Search this forum on RUU or 4.10.00 and you should find the link to the file (~18M). TMO is pretty much locked on ROM4.10.00, Radio 6.24.01 still needs some work, still having problems only with NorTel Networks equipment. Hope this helps you.
Filename to look for:
RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe
ROM: 4.01.00 ENG
Radio: 6.24.01
it is my dream ... no mission at this point to find this upgrade .... can anyone point me in the right direction? :?
thanks
Your "mission"
Your mission should be to practise with the search buttom associated with the Upgrading It forum, at top of page next to FAQ button, to find what you're looking for!
thanks for the mission co ordinates .. but i have actually tried the search option believe it or not ... before i posted ... also have tried the link via the ftp that was suggested .. just cant seem to located it ...
stumped :?
Hi eurowerks !
You can download from my ftp server.
ftp://pdabolt.homeftp.net
user:som
pass:som
sebi ...
hello and thank you ... still cant access the folder ... it says something like windows cant access the folder ... be sure i have epermission to access ... just cant understand how ive come so far and im so close ... i am new to this so im sure im just not getting something right ... i do appreciate the offer .. thanks .. ill keep trying
Hey eurowerks you need to use a program like CuteFTP or WS_FTP LE
to get to this site as well!
CuteFTP can be found at:
http://www.cuteftp.com/downloads/cuteftp.asp
WS_FTP LE can be found at:
http://www.ftpplanet.com/download.htm
HTH
thanks a bunch qman ...
the ftp download was a success
i am now running ..
rom : 4.01.00 eng
rom date : 10/27/03
radio version : 6.24.01
still no luck with it picking up a signal for the phone ... i have removed the sim ... and even switched between 900 and 1900 and still cant get a signal ...
any ideas? anyone ... please :?
It might be your SIM card so try it in another phone and see if it works.
If so try upgrading to the AT&T Radio stack its what I use.
HTH
i really cant believe it is the sim as it works fine in my other phone .. so i tried to do the radio uprade ...
from 6.24.01
to a.20.10
i was a bit skeptical as it is an at&t stack and i am using t mobile usa ..
dloaded it from yorch ... opened it in the windows directory of the xda as they say ... and it says something like upgrade failed.. press ok to restart
:?
says to be sure the path is correct and none of the files are missing ... perhaps there is something i am missing ...
also wondering how dangerous this radio upgrade is ... been reading some horror stories about others that have ruined their devices trying the upgrades .. but after all this is the 3rd rom ive installed so i figured what could a radio upgrade hurt ... anyways .. still no luck ..
eurowerks said:
i really cant believe it is the sim as it works fine in my other phone .. so i tried to do the radio upgrade ...
from 6.24.01
to a.20.10
i was a bit skeptical as it is an at&t stack and i am using t mobile USA ..
dloaded it from yorch ... opened it in the windows directory of the xda as they say ... and it says something like upgrade failed.. press ok to restart
:?
says to be sure the path is correct and none of the files are missing ... perhaps there is something i am missing ...
also wondering how dangerous this radio upgrade is ... been reading some horror stories about others that have ruined their devices trying the upgrades .. but after all this is the 3rd rom Ive installed so i figured what could a radio upgrade hurt ... anyways .. still no luck ..
Click to expand...
Click to collapse
Confirming you copied all of the below files to your Windows root folder
RSUpgrade.exe
RSUpgrade.cp64
monitor_ul_bs.map
monitor_ul_bs.m0
and the upgrade still failed with a be sure path is correct and none of the files are missing? BTW your old radio stack is still in tact since it failed in
this way. Just remove any leftover upgrade links from your Startup folder.
How dangerous is upgrading the radio stack you ask? Its the most dangerous upgrade you can do in my book and should be only do as a last resort in getting your phone to work.
Also I can understand why you're skeptical as to it being an AT&T radio stack, most are but its the most powerful radio stack to date in my book and I've used them all (US that is). Your device must really be in bad shape to knock it down! :shock:
BTW what part of the US are you located?
HTH
Confirming you copied all of the below files to your Windows root folder
RSUpgrade.exe
RSUpgrade.cp64
monitor_ul_bs.map
monitor_ul_bs.m0
yes the above files were all copied to the windows folder of the xda .. not too sure about what u mean by root folder ... but they were opened within the windows folder ... :?
i did remove the files after it failed .. perhaps i should just be happy the pda works and it powers on ... :lol:
anyways im here on the east coast (nyc) .. lemme know if anyone comes up with anything else ... also wondering ... has anyone tried the upgrade from the siemens web site ?? i think it is something like A.20.17 .. im assuming it is a radio upgrade as well ?
question re. radio upgrades ..
is performing the upgrade by opening the exe file on the device standing alone the risky part? :? since upgrading the rom also has the radio upgrade within it and it is done while connected to the pc on the cradle with activsync perhaps that makes it safer ... ??
eurowerks said:
also wondering ... has anyone tried the upgrade from the siemens web site ?? i think it is something like A.20.17 .. I'm assuming it is a radio upgrade as well ?
question re. radio upgrades ..
is performing the upgrade by opening the exe file on the device standing alone the risky part? :? since upgrading the rom also has the radio upgrade within it and it is done while connected to the pc on the cradle with ActiveSync perhaps that makes it safer ... ??
Click to expand...
Click to collapse
The A.20.17 upgrade contains both ROM and radio stack upgrade. The ROM is AT&T's most current Pocket PC 2002 update.
As far as the radio stack failure goes it can happen either way but its best not to have your device connected to the PC while doing it though!
HTH
Hey guys ...
The point is what is the actual type of the device A or B. Forget what's is shown in the device info as it can ve changed buy a wrong ROM or RSU upgrade. Refer to the device sticker in the device back side. If the device is A type then it's only 900 or 900/1800 type ... don't ever try to switch to any 1900 option as it may ruin the Radio part. If it's B then you can select the 1900 if your network supports this band. Don't forget also to switch it in the phone settings since now you have 4.01.00.
As Peter Poelman said, try to select the right band from the bootloader and soft reset more than once. Usually it takes many trials.
Good luck ...
Related
Many people have said that their running t-mobile radio version 6.24, I'm currently on 6.18 and want the always on GPRS. I've searched the site but can't find where to get the radio stack and how to upgrade it? I already upgraded to ROM 4.00.16 and it works great.
-Tom Huseby
trhuseby said:
Many people have said that their running t-mobile radio version 6.24, I'm currently on 6.18 and want the always on GPRS. I've searched the site but can't find where to get the radio stack and how to upgrade it? I already upgraded to ROM 4.00.16 and it works great.
-Tom Huseby
Click to expand...
Click to collapse
Tom- Are you sure you want to do this? I beleive that 6.24 is a beta version. I haven't heard a lot of feedback on it, but I have heard that going back to 6.18 is going to be near if not impossible after the upgrade.
I held off on the radio stack upgrade because I don't want the official T-Mobile upgrade to have issues. By only upgrading the OS, I can easily re-flash to the original factory rom before running the official T-Mobile upgrade when it is released. That upgrade could potentially fail if the radio stack upgrade portion detects a version other than the official ones that it expects. Not sure on this though...
Either way, below is a link to an RAR file that has the OS and the radio stack. Extract the .EXE using WinRAR or the like and give it a go. Just to be on the safe side, I wouldn't run this update on any other OS than the last official T-Mobile upgrade.
Good Luck
http://www.romanweb.com/yorch/official-tmo2003.rar
trhuseby,
did you try the new t-mobile as indicated by digital_1? I am tempted to try it also and wanted to know your results...thanks!
I'm going to wait until the formal release from T-Mobile, just too afraid I won't be able to upgrade to it if I try the beta above.
trhuseby said:
Many people have said that their running t-mobile radio version 6.24, I'm currently on 6.18 and want the always on GPRS. I've searched the site but can't find where to get the radio stack and how to upgrade it? I already upgraded to ROM 4.00.16 and it works great.
-Tom Huseby
Click to expand...
Click to collapse
Like digital_1 stated its a pain to downgrade the radio stack so be absolutely sure you what to do it and will be happy with the results.
What I would do first is find somebody in my area that has already
done the upgrade and see what their reception / performance is like.
In most case the reception/performance should be better.
As for me I found the the AT&T radio stack was much better in my area (Las Vegas, NV) than the T-Mobile stack and is my radio stack of choice with that said I'll be staying with it no matter whats to come. No more radio stack upgrades for me.
So if you upgrade to 6.24 and it works good in your area stay with it no matter what!
Warning the signal meter is known to show lower signal strength but actually the reception / performance is better than what is being shown.
Anyhow once you have the needed files follow the below to upgrade:
Copy RSUpgrade.exe, RSUpgrade.cp64
,monitor_ul_bs.map and monitor_ul_bs.m0 to your devices windows root folder then from Pocket File Explore double tap RSUpgrade.exe and this will start the radio upgrade.
HTH
digital_1,
Just to make sure I don't mess up ....
You are suggesting that I have 4.00.10 ENG T-Mobile US on before I upgrade to 4.00.16 ENG T-Mobile US, right? I currently have 4.00.11 ENG WM2003 on my t-mobile device.
Just making sure! Thanks!
obelcher said:
digital_1,
Just to make sure I don't mess up ....
You are suggesting that I have 4.00.10 ENG T-Mobile US on before I upgrade to 4.00.16 ENG T-Mobile US, right? I currently have 4.00.11 ENG WM2003 on my t-mobile device.
Just making sure! Thanks!
Click to expand...
Click to collapse
obelcher-
I don't want to give the wrong impression- I've never ran this update nor probably will I because I don't want to mess up my radio stack. Remember- that this .EXE will upgrade your radio stack, and as Qman pointed out in another thread, it is difficult if not impossible to downgrade the stack if it doesn't work out. Make sure you read all the posts in this thread so that you are well educated on the risks/advantages. That being said...
I would reflash the phone back to the latest official T-Mobile release before running the update. 4.00.11ENG isn't an official T-Mobile release- it's beta. I think the last official version (at least for me in US) was 3.08 (or 3.14.40 if you ran the update from T-Mobile).
I dunno why people keep saying it is near impossible to downgrade your radio stack. It is neither impossible nor hard at all.
You just need to copy 4 files to your windows folder on your XDA and run the upgrade EXE file. It does it's thing and you do a hard reset and you're done.
Okay I hope you are right and I can revert to 6.18 because I just upgraded to 6.24.. I'll let everyone know how it goes.
chocodough said:
I dunno why people keep saying it is near impossible to downgrade your radio stack. It is neither impossible nor hard at all.
You just need to copy 4 files to your windows folder on your XDA and run the upgrade EXE file. It does it's thing and you do a hard reset and you're done.
Click to expand...
Click to collapse
Wasnt somebody offering an XDA free to anybody that had a downgrade radio stack solution, if its easy why would they do that?
trhuseby said:
Okay I hope you are right and I can revert to 6.18 because I just upgraded to 6.24.. I'll let everyone know how it goes.
Click to expand...
Click to collapse
Don't do it!
Radio stack 6.18 is not a separate upgrade like 6.24 is, 6.18 is included in the ROM update. You'll be sorry if you do!
HTH
Too late! I already upgraded it! Seems to work great though!
chocodough said:
I dunno why people keep saying it is near impossible to downgrade your radio stack. It is neither impossible nor hard at all.
You just need to copy 4 files to your windows folder on your XDA and run the upgrade EXE file. It does it's thing and you do a hard reset and you're done.
Click to expand...
Click to collapse
Have you actually tried this before? Going from 6.24 back to 6.18?
I am under the understanding that the radio upgrade is a forward-only process- meaning that it will check to make sure that an earlier version of the RSU isn't overwriting a more current version. Based on reading posts here, it has nothing to do with version numbers but something internally coded.
Regarding the free XDA- well cruisin-thru was right. The thread is marked "FREE XDA". They are offering a free XDA to someone who can downgrade a radio stack. None have claimed the XDA to date!
Well I tried the 6.24 radio stack and ended up going back to AT&T's A20 stack.
Had no problem at all, just put the 4 files people say in these forums into the windows folder of the XDA and run the EXE file. a few minutes later it is done, and you do a hard reset and everything is fine.
6.24 Radio Stack
Can someone tell me where I can get just the 6.24 radio stack without the 4.00.16 ROM?
I've been running 6.24 since yesterday and I the thing I like the best is the ability for the GPRS to stay on while the PDA is off (i.e. display blank). This allows me to wireless activesync and download my IMAP accounts in the background without me having to turn on the unit.. Only had a few wierd issue yesterday where SMS messages came in with the last half of the messages scrambled...
I found the answer to my questions...thanks anyway. The answer (thanks to mdavidm):
"The latest, unless I missed something, is 6.24.00, and is available as part of the TMo 4.00.10 ROM update at
http://www.romanweb.com/yorch/official-tmo2003.rar which includes the 6.24 radio and 4.00.10. To install, REMOVE YOUR XDA FROM THE CRADLE. Unzip the file, and then cancel out. It creates a directory called RUU under Program Files. Place your xda back on the cradle and copy the two files entitled monitor_ul_bs and the two files entitled RSUpgrade from the RUU\English directory to the Windows directory on your xda. Then execute the RSUpgrade executable file on the xda. This will install the 6.24 radio. Once complete, a hard reset might be required, but normally that is not necessary.
David"
Hal.
trhuseby said:
Too late! I already upgraded it! Seems to work great though!
Click to expand...
Click to collapse
I thought we were talking about reverting back to radio stack v6.18 which would be a down grade! :wink:
trhuseby said:
Only had a few wierd issue yesterday where SMS messages came in with the last half of the messages scrambled...
Click to expand...
Click to collapse
FYI- I get that with the old 6.18 stack sometimes too. May not be releated to the RSU.
Startup said:
I found the answer to my questions...thanks anyway. The answer (thanks to mdavidm):
"The latest, unless I missed something, is 6.24.00, and is available as part of the TMo 4.00.10 ROM... Once complete, a hard reset might be required, but normally that is not necessary.
Click to expand...
Click to collapse
I will say this is absolutely the best Radio Stack I've had! No problems except if I have my earphone plugged in and I'm using my wireless car radio transmitter for mp3s plugged in. It seems to think it is to engage the speakerphone, but it is also trying to use the hands free microphone.... resulting in you need to unplug the hands free and the transmitter plug. Than again it could be i designed the transmitter and plug wrong in some way... :roll:
Anyway, I didn't need to do a hard resit, but a soft one was needed.
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.
Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....
Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:
Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx
Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...
faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.
T-Mobile Germany has annouced the release date for the Windows Mobile 2003 ROM for the XDA I as December 29th. Hopefully T-Mobile USA will announce something similar today. :roll:
http://www.t-mobile.de/mda/software/1,5193,7482-_,00.html
But this is only for German Model, isn't it?
hmmmm ... and how about the language version ?!
to me seems like only German is to be available ... too bad
Release date is now beginning January
Hope there will be an update....
Regards
Stefan
aren't we talking about the German version of WM2003 ..
announce/release date or in general WM2003 official release for T-Mobile ??
regards,
monika
http://www.t-mobile.com/promos/ppc2003/
this link was working few weeks ago with information about update but now seems to be dead.... somebody spoke with customer service and they said "in the middle of February" so we will see...
for me 4.01.00 ENG work fine
ps. pozdrawiam rodaczke
well, maybe there has been some minor problems ...
with that ROM release so they've decided to stop distributing for a while, hard to say ...
I presume as official release is hopefully coming with a short notice stick with current version I have
regards,
monika
ps. rowniez witam i pozdrawiam
somebody wrote that 4.01.00 ENG is only good to US tmobile ppc owners because of radio ... I mean only for PW10B1 units ...
I did reflash mine yesterday with this version and I like it so far .... signal indicator doesn't look normal because I dont have signal but my ppc recives calls normally ....
mine XDA is also PW10B1 .... heh
now I know for sure that I have US version, thank you for the tip ...
dziekuje i pozdrawiam,
monika
ps. out of curiosity, have you already get my private message ???
HI Monika,
Where did you get this T-Mobile WM2003 ROM?
Is it English version?
Can it be used in Asia?
Many thanks,
chris_khho said:
HI Monika,
Where did you get this T-Mobile WM2003 ROM?
Is it English version?
Can it be used in Asia?
Many thanks,
Click to expand...
Click to collapse
hello, I got it from http://www.yorch.net/ but I use an US version of XDA, for me it's hard to say whether it suits Asian hardware version, my rough guess is that Radio Stack version shall be different .... unfrtunately I have never came across the Asian hardware version
but before making any upgrades read that forum, e.g.
http://forum.xda-developers.com/viewtopic.php?t=4630
and also the other threads just to double check
regards, monika
Tks Monika,
But I see that you are using WM2003 T-mobile ROM 4.00.21.
From Yorch, 4.00.21 is only nbf file which is not nb1 so that I can't use the SD method for upgrading.
Any hint?
Marcyjok said:
somebody wrote that 4.01.00 ENG is only good to US tmobile ppc owners because of radio ... I mean only for PW10B1 units ...
I did reflash mine yesterday with this version and I like it so far .... signal indicator doesn't look normal because I dont have signal but my ppc recives calls normally ....
Click to expand...
Click to collapse
i have PW10A1 and i installed the v4.01.00 tmobile update i just downloaded an cooked rom from yroches kitchen then unzipped it all and replaced the nbf file from the v4.01 over the cooked rom nbf and flashes it that way works fine on english netowrks and i still have 900/1800 mhz just what ever you do do not go into phone options and click on the band tab if you do you will loose 1800mhz bank and then be on 900/1900 if you do this load up the bootloader click the calendar button and click on gsm 900/1800 and itll say reset or some crap do this then softreset and youll have 900/1800 back again but dont click on the band tab or youll have to do this.
gaz
p.s ive found it to be quite stable so far but seems to run kinda slower then v4.00.11 but it has improved features
hi
few questions
I have US tmobile Pocket PC Phone so it is type B so I flashed with no problem with 4.01.00 (RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe) so I think that this soft will work fine with Monika's XDA if it is American....
Monika your XDA is from AT&T ? or TMobile ?
Is it ok to use it with European PW10A1 ?
gaz do you have exactly same ROM as I have ? (check my signature)
and this problem with band tab is only one ?
do you see TMobile logo when U do a soft reset?
Anybody use this soft ver. in Europe?
i use 4.01.00 with asian radio stack 4.21.01 with no problem
i used flash method when upgrading the rom
i unzip the exe file, took the .nbf file and write it to my sd card using OSImageTool and boot my xda with the SD card... 5 minutes later my XDA is running WM2003 with the latest ROM version :lol:
for asian users, do not open the band tab... if you do that, you have to go to bootloader and choose band 900/1800 to make your xda work again
Marcyjok said:
hi
few questions
I have US tmobile Pocket PC Phone so it is type B so I flashed with no problem with 4.01.00 (RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe) so I think that this soft will work fine with Monika's XDA if it is American....
Monika your XDA is from AT&T ? or TMobile ?
Is it ok to use it with European PW10A1 ?
gaz do you have exactly same ROM as I have ? (check my signature)
and this problem with band tab is only one ?
do you see TMobile logo when U do a soft reset?
Anybody use this soft ver. in Europe?
Click to expand...
Click to collapse
I have an US version of XDA with T-Mobile ROM installed ... and it's T-Mobile ppc pe, radio 4.21.00 and protocolversion 32S54
regards,
monika
Hi Toshiro,
I am a bit confused. The 4.00.21 nbf file from Yorch cannot be used by OSImageTool since I tried that before and confirmed by someone else in this forum. He said only nb1 file can be used for SD method.
Also, where did you get this 4.01.00 ROM?
Thanks v much.
chris_khho said:
Hi Toshiro,
I am a bit confused. The 4.00.21 nbf file from Yorch cannot be used by OSImageTool since I tried that before and confirmed by someone else in this forum. He said only nb1 file can be used for SD method.
Also, where did you get this 4.01.00 ROM?
Thanks v much.
Click to expand...
Click to collapse
Use XDArit.exe insted of the OSImageTool and you can write it to an SD card. www.yorch.net has 2 versions. if the newer one doesn't work, try the older one. I also found I have to unplug my cradle from my computer to get XDArit to work properly.
MrDollyMaker
the best places worth trying
http://forum.xda-developers.com/viewtopic.php?p=21147&highlight=#21147
and also
ftp://tmobile:[email protected]:21
regards, monika
Thanks v much.
But that's integrated with the us radio which is not suitable for me.
Somebody plz help. Got a XDA 1 (A Version), and have Rom Version 3.17.03 ENG, and Radio Version 4.21.00. I am on the Vodafone (UK) Network and want to upgrade phone to new 2003 software. Is it capable of being done yet, and if so, what files do i need (or a link plz). Many Many thanx to all those who reply. Regards, Ronnie[/b]
www.yorch.net and please scan around the forum before attemting anything that may kill your pda.
thanx for the reply, i have been to that site but not sure which files to use/download. Any info appreiated, thanx, Ronnie
1. Go to the kitchen option on the left side menu. Select the base for your new cooked ROM ... ex: 4.00.05, or 4.00.16 ... etc
2. You should see the top screen gauge in red. That means you have to check and uncheck some of the s/w contents untill it's green.
3. Select the EXE method and wait till it's "cooked" then down load the ROM file. Connect your XDA to your PC using the cradle and run the EXE and follow the instructions.
4. IMPORTANT: better to have a backup on SD card befor starting just in case.
Good luck ...
Thanx, will that work ok with the A model?? :lol:
It worked for me. The difference between A and B is significant only for RSU upgrades not the ROM. However, official ROM upgrades do this check as well, but the kitchen doesn't .... clever developrs!!!
Is there any chance you could send me the 4.01.00 file, can't find it anywhere. I notice you have that update on yours, and radio vers 6.24.01, do you have that available too?? Will it be ok in the uk, or am i best just using the 4.00.05 one from the kitchen, and leaving my RSU with 4.21.00 vers.
Many thanx for all your help, Ronnie :?
I notice you have that update on yours, and radio vers 6.24.01, do you have that available too?? Will it be ok in the uk
Click to expand...
Click to collapse
One very important lesson, if you have a functioning RSU, do NOT mess up with it :lol:
Got it updated thanx, works very well, but cant get active sync to work now, downlaoded v 3.7.1 and still nothing. Any ideas?? Ronnie :x
what is your device info right now ?
what type of error you get with active sync and is it on the XDA or the PC ?
Hint: try another PC to see whether it's your XDA or the PC
Device Info is:-
Rom: 4.00.05 ENG
RUU: 4.21.00
Worked fine before updating Rom, not done anything different to pc, and now it just can't find the XDA...??
Not sure why.
Ronnie :?
Do these tests in order and check the result after each:
1. soft reset
2. reinstall active sync
3. another PC
4. hard reset
many thanx for teh advice, got it sorted now, had to re-install active-sync, now works a dream, and a lot faster too. Many many thanks to Biso007 for your help, this forum is COOL
TMOBILE USA ROM UPGRADE FROM 3.14 TO PPC2003
i have checked yorch and there doesnt seem to be a base rom matching mine. is there a way to upgrade to 2003. if not what are my options
is there a way to upgrade to 2003. if not what are my options
Click to expand...
Click to collapse
It doesn't matter which ROM you have now. Just cook any 2003 ROM there and it will put you on WM2003 (unless your device is from T-Mobile, 4.00.05 is a best choice).
Good luck
Hi, has anyone figured out what the difference between the i-mate Radio v1.05.00 WWE and the v1.1.0.00 US is ?
Any one using the v1.10.00 outside the US ? Any problems or hints ?
Torsten
hey,
As far as i know, the (1.10.00 radio version) is meant to be used only in the US, or at least on 850 networks. so i guess u can't compare these two.
Sozon
sozon said:
hey,
As far as i know, the (1.10.00 radio version) is meant to be used only in the US, or at least on 850 networks. so i guess u can't compare these two.
Sozon
Click to expand...
Click to collapse
hmm, i upgrade to 1.10.00 usa radio and its fork fine!
i use it at european gsm (russia, dalsvyaz) standart 900/1800.
but i don't know which things changed
anybody knows ?
where to get it and i will give it a try... we use here gsm 900....
I wonder if this will fix the problem some of us are having with the 1.6 ROM upgrade with not being able to re-connect to GPRS without a soft reset or switching flight mode on/off. Any thoughts?
to many drinks on my side!
This is a quote from the i-mate
ROM builds with radio versions 1.05.00 and 1.10.00 all include audio enhancements for voice calls. They also contain the improved camera driver. We are working hard to deliver these new builds to our full suite of languages.
indicates PM10C, then the customer should upgrade with the North American JAM ROM Build.
If the model number indicates PM10A, then the customer should upgrade with the Generic Worldwide English ROM Build. You will not be able to install the North American JAM (850) ROM. This WWE build does not include the connection settings for the US operators found in the North American build, though these are all available to download separately from clubimate™.
@Mashie,
i have the same problem my gprs keeps disconneting on and off... sometimes it works for a few minutes and then start disconneting.... and i have to do a soft-rest to get it to work again....... does anyone else has the same problem?? or a fix?
@alexk,
Can you hear me now? can you hear me now?
Can you hear me now?
lool love those ads
@torklemm,
i installed the 1.10 radio and it's working fine... i felt a better voice quailty than the 1.05... and works in 900 networks fine
Where can we find this radio version? Can somebody post a link to it? Thanks
PapaDocta said:
@torklemm,
i installed the 1.10 radio and it's working fine... i felt a better voice quailty than the 1.05... and works in 900 networks fine
Click to expand...
Click to collapse
PapaDocta, how did you install it?
Do the usual, unzip and delete all .nbf's except radio.nbf?
Or is it more complicated?
thks all for sharing experiences, just managed to upgrade (only) radio rom to 1.10 (the JAM USA one). I used all the files except the NK_ , the ms_ and maupgradeut which I replaced with the maupgradeut_NOID that I downloaded from the ftp. USB connection in Activesync was disabled and I put my mini in bootloader mode before the upgrade...... and it went smoothly.
My network is also 900 and it works just fine.
Signal strength, comparing to 1.05 is the same, only it seems that the GPRS icon is always shown (when it's available) which was not the case with 1.05
here ya go... and my way of upgrading was i didn't disable anything just run the maupgradeut_NOID once and the device went into the bootloader mode and i got the country error i ignored it and run maupgradeut_NOID again without resting the device.. and all worked but i advice using the above steps cuz it has been tested before...... here is the files you requested and i renamed the maupgradeut_NOID to maupgradeut so don't panic ;-)
enjoy
Thanks a TON for this! I installed on my S100 and the GPRS now works perfectly. I can connect and disconnect without having to turn flight mode off/on.
-Mashie
Thanks man. Upgraded and working fine!!!!
Amaro
amaro_dj said:
Thanks man. Upgraded and working fine!!!!
Amaro
Click to expand...
Click to collapse
Hi,
I have started my uograde 10 minutes ago but it seem to be freezed...... :shock:
what I should do now?
thanks
fausto
It depends on how you are upgrading. If you are using the files in the .rar file that Papa posted then you need to run MaUpgradeUT.exe and it will put your device in Bootloader mode. Once you get the country ID error, I closed that window and ran MaUpgardeUT.exe again and the upgrade went flawlesly. Hard Reset to get out of BL mode and set your device back up.
Hope this helps...
-Mashie
Mashie said:
It depends on how you are upgrading. If you are using the files in the .rar file that Papa posted then you need to run MaUpgradeUT.exe and it will put your device in Bootloader mode. Once you get the country ID error, I closed that window and ran MaUpgardeUT.exe again and the upgrade went flawlesly. Hard Reset to get out of BL mode and set your device back up.
Hope this helps...
-Mashie
Click to expand...
Click to collapse
Wow, thanks Mashie for help. Now I have stopped the upgrade, I have restarted it and it seems to work, now there is a progress bar about at 50%.........hope to continue good......... :roll:
bye
Hi everyone.
Do I need to backup the RAM or ROM before upgrading radio's ROM?
Does the radio 1.10.0 USA means for O2 XDAII mini?
Thank you in advance.
Best regards
Arto
Artosoft said:
Hi everyone.
Do I need to backup the RAM or ROM before upgrading radio's ROM?
Does the radio 1.10.0 USA means for O2 XDAII mini?
Thank you in advance.
Best regards
Arto
Click to expand...
Click to collapse
if you want u can just backup ur data... cuz afte u upgrade the device will auto hard rest.... and you can use it on O2 XDAII mini shouldn't be a problem.....
if you don't have problems with ur current radio then don't upgrade... if you just curious then go for it.
good luck
Thanks papadocta.
Well, I am curius :lol:
Beside, I hope 1 extra bar signal strength (that reported by those upgraded to 1.05.0 WWE and 1.10.0 USA) will save my O2 XDA II mini's battery longer.
Is it correct that 1.10.0 USA is newer than 1.05.0 WWE? Because I read somewhere is not always true. Anyone can confirm?
Thanks again.
Best regards,
Arto