Hi,
is there somebody who has successfully tried TV Remote Controller 5.5 on XDA2?
Pour les frenchies...
Aux abonnés Bouygues, pouvez vous m'expliquer les différents paramètres pour utiliser mon abonnement data GPRS ainsi que l'envoi de MMS... Le support technique n'est pas fichu de me donner la bonne configuration.
Merci beaucoup pour votre aide.
well not that i know of
but keep in mind that the ir in at least the xda1 not sure about xda2
is pretty weak
i get a max range of 30cm when using the remote on my xda1
that makes the program useless imho
in french
you have your answer on www.pdafrance.com. In the news you have a full board with all p arameters for all provider
Best
I had an S100 that I've sold because I found it a bit small and had an horrible sound.
I 'm now testing a 2020 before to by the 2020i. I find the battery very poor... One day and with the S100 2 or 3...
Does the 2020i has a better lasting time? Has someone the experience with 2020i and S100 or 2020? And the sound? And the Softawre problems?
Thanks and best regards
I'm thinking of buying the Prophet but have been told the device is a bit slow. How is the speed of the Prophet in comparison to the Wizard? as i think Wizard runs at a good speed.
Never used a Wizard so I can't do that comparison.
But I can tell you the Prophet is SLOW. IMO, overclocking is absolutely necessary.
I have not used the Wizard either, but had the Jam until I got the M600 and I have to disagree with the previous poster. I use the Jamin for Tomtom and PIM alot, but have only used WMP a bit, however it played movies I encoded for the Jam just fine.
I have found the M600 to be very responsive and not had any speed issues. However if you want to use if for Skype (I don't) then you would come across problems without overclocking. For myself and what I use the M600 for, it is just great.
BONJOUR
J UTILISE LE PROPHET APRES DE MULTIPLE PDA DELL X30 IPAQ 2210 ET TUNGSTEN T3 ET BIEN MEME S IL EST MOINS RAPIDE IL PERMET D EMPLOYE LA PLUPARS DES SOFT SANS OVERCLOCKING
POUR MA PAR J AI UTILISE OMAPCLOCK JUSTE POUR TOMTOM
@ Nico1970
I do not mean to be rude, buddy, but where did you get the hint from that this is a french speaking forum ?
We all try our best to write in english, despite our nationality. And our knowledge of the english language !
Oh! One last thing: writing CAPITAL LETTERS means screaming...
Happy posting.
I run my prophet at 240MHz and it's much more responsive now than before it was overclocked.
For what you need - and how, search the forum for omapclock and MemMaid.
digger said:
I have not used the Wizard either, but had the Jam until I got the M600 and I have to disagree with the previous poster. I use the Jamin for Tomtom and PIM alot, but have only used WMP a bit, however it played movies I encoded for the Jam just fine.
I have found the M600 to be very responsive and not had any speed issues. However if you want to use if for Skype (I don't) then you would come across problems without overclocking. For myself and what I use the M600 for, it is just great.
Click to expand...
Click to collapse
Just to be clear, you mean JAMin or JAM. They are different phone. JAMin is a Prophet and JAM is a Magician.
Anyway, I'm using a Charmer now, which is very similar to a Prophet, microprocessor and OS wise. I have no problem running Tomtom, and many other applications. I even tried to encode and played an entire Friends episode on my phone and it works very well.
However, there are some other programs that I find it to be slow. E.g. I tried those NES (or some other) emulator that load the games from ROM files (not the ROM of the phone).
Then, I also find that in normal usage, if I were not to softreset the phone once every 2-3 days, the phone will respond VERY slowly. Which, I'm not sure if that's the WM5 problem or the phone.
Anyway, I've done some benchmarking of the Charmer (same processor as Prophet) with the older Magician, and the result shows that the Charmer is a terrible device as compare to Magician in terms of speed.
http://forum.xda-developers.com/viewtopic.php?t=53084&start=100
However, as according to the posts here
http://forum.xda-developers.com/viewtopic.php?t=55153&highlight=
It seems that the Chamer has almost twice the duration in terms of battery life as compared to the Magician. So, that is a gain for using slow processor.
It would be good if someone with a Prophet and Wizard to run the same benchmarking. Or someone send me a Wizard to run the benchmark?
Ok, to clarify as I have inadvertantly referenced both the M600 and Jamin. I now have the M600 (same as Jamin) which I run TT on. Also ran TT on my older Jam. Both ran fine and TT startup was actually quicker on my M600 (maybe due to different SD card), but route planning was marginally quicker on the Jam. So far no speed problems with my M600 at all.
Prophet, Charmer and Wizard - since they are all OMAP based devices, can be overclocked using omapclock. I must admit I have not tried running TomTom at the default speed as I installed it since bumping the processor up to 240MHz but as things are it works great.
Hi all,
well, here is a clue which drives me nuts since this morning.
For reasons I really ignore, my phone conversations on my qtek 9000 get automatically disrupted after around 7 minutes :roll:
I can distinctively hear a "click" whilst talking....
Any bad genius inside teasing me ....? :shock:
Anyone for a suggestion..? I really do not know which settings to modify in case..First time it does that by the way.....
Tks+cheers
Tony
meme probleme !
meme probleme avec une rom sfr
salut a tous
dèsolé je suit nouveau et parle pas Anglais
mon hermes ne s'allume plus suite au changement d'ecran et de coque
la led située au haut a gauche est rouge quan l'appareil est sur secteur ou sur usb au pc
Bonjour mon ami,
Since you are new and don't talk English, please use an online translator to put an translation with your post, so that people fom all nations can collaborate and help you,
Regards,
EquinoXe
[EDIT]
Took the liberty to translate your post:
[translation]
Hello to all,
sorry I am new, and I don't speak English.
My hermes does not turn on due to a change of the LCD screen and housing.
The LED located at the top left is red when the device is connected to the usb or pc.
[/translation]
RED LED means the battery is not charging.
Possibly caused by a battery connector problem OR one of the flexi cables is not connected properly. Check all the internal connectors again.
Mike
PS. I hope you remembered to move the screen orientation magnet from the old casing to the new one! NOT that this is your main problem)
--------------------------------------------------------------------------------
thanks Mike