Caller2picture cannot work with PocketZenPhone - MDA II, XDA II, 2060 General

Dear Zendrui,
Firstly thanks a lot for providing such a tremendous utility, it is what I have been searching for a long time and finally i got it . Thanks again !!
However, I encountered a problem and has no way out. I have already installed "caller2picture" utiity in my XDA2. This is a software which can assign specific ringtone for different contact. Originally it worked fine, but after i installed the PZP , the Caller2picture cannot work anymore.
Can you guide me a way how to solve this issue ? or any recommendation for other similar function software which can work with PZP ?
Regards/ skkao

skkao said:
Dear Zendrui,
Firstly thanks a lot for providing such a tremendous utility, it is what I have been searching for a long time and finally i got it . Thanks again !!
However, I encountered a problem and has no way out. I have already installed "caller2picture" utiity in my XDA2. This is a software which can assign specific ringtone for different contact. Originally it worked fine, but after i installed the PZP , the Caller2picture cannot work anymore.
Can you guide me a way how to solve this issue ? or any recommendation for other similar function software which can work with PZP ?
Regards/ skkao
Click to expand...
Click to collapse
I have no idea about caller2picture, but I do know phonext and that is also the same idea and is working. Maybe try that?

Related

Caller2picture cannot work with PocketZenPhone

Dear Zendrui,
Firstly thanks a lot for providing such a tremendous utility, it is what I have been searching for a long time and finally i got it . Thanks again !!
However, I encountered a problem and has no way out. I have already installed "caller2picture" utiity in my XDA2. This is a software which can assign specific ringtone for different contact. Originally it worked fine, but after i installed the PZP , the Caller2picture cannot work anymore.
Can you guide me a way how to solve this issue ? or any recommendation for other similar function software which can work with PZP ?
Regards/ skkao

Phone Profiles 1.1.0.287 is out!

Hi guys,
Since almost 350 Magician fellows have downloaded my application, I dare informing you all that I have released an updated version.
Come over my site and download it:
http://www.winmobileapps.com
See you there.
Bye.
slvrbllt said:
Hi guys,
Since almost 350 Magician fellows have downloaded my application, I dare informing you all that I have released an updated version.
Come over my site and download it:
http://www.winmobileapps.com
See you there.
Bye.
Click to expand...
Click to collapse
Hi slvrbllt,
Just been to your site. Many thanks for the cycle bluetooth app, just what I was looking for.
I tried your Phone Profiles app and its good but unfortunately conflicts with my Qtek firmwares flight mode - it's a long story.
Anyway I'm trying to remove the app but finding it a little difficult. It keeps saying that /windows/profiler.dll is open or read only even after a soft reset. Any ideas how I can remove the app? It suggests doing a stop all but no apps are listed there.
Thank you,
hi slvrbllt!! Can we assign only a vibration for the new SMS without ringing (for a silent profile for example with a vibration for the ring)? Thanks for this great update!bye
borgs said:
Just been to your site. Many thanks for the cycle bluetooth app, just what I was looking for.
I tried your Phone Profiles app and its good but unfortunately conflicts with my Qtek firmwares flight mode - it's a long story.
Click to expand...
Click to collapse
Have you tried DKToday? It's a great BT cycler & more.
@slvrbllt,
Very nice app. you can expect Dutch translations soon. Only thing I like as an improvement is small buttons to quick pick a profile or a possibility to put it in the tray.
Cheers, M
Hmm, looks Good...
borgs said:
slvrbllt said:
Hi guys,
Since almost 350 Magician fellows have downloaded my application, I dare informing you all that I have released an updated version.
Come over my site and download it:
http://www.winmobileapps.com
See you there.
Bye.
Click to expand...
Click to collapse
Hi slvrbllt,
Just been to your site. Many thanks for the cycle bluetooth app, just what I was looking for.
I tried your Phone Profiles app and its good but unfortunately conflicts with my Qtek firmwares flight mode - it's a long story.
Anyway I'm trying to remove the app but finding it a little difficult. It keeps saying that /windows/profiler.dll is open or read only even after a soft reset. Any ideas how I can remove the app? It suggests doing a stop all but no apps are listed there.
Thank you,
Click to expand...
Click to collapse
Try to uncheck Phone Profiles on Today Items before uninstall.
It works for me.
Regards,
Arto.
looks great, but there is a problem with my magician. it crashed when I try to run it, i just saw a window appearing and immideately disappearing .... (my system is runing windows mobile 2003 simplified chinese edition)
Artosoft said:
Try to uncheck Phone Profiles on Today Items before uninstall.
It works for me.
Regards,
Arto.
Click to expand...
Click to collapse
Cheers Arto, that's exactly what I was forgetting to do.
Thanks.
oltp said:
Have you tried DKToday? It's a great BT cycler & more.
Click to expand...
Click to collapse
Thanks, I gave it a try but it has problems with flightmode also (note. these problems seem to be due to a particular Qtek firmware). I think I'll stick with radiooff and CicleBT. Thanks for the info though.
I've downloaded and installed the software, it look good !!
But when I get an incomming call the callerid popup appears followed by a short beep, not the ringtone I setup in the profile... What am I doing wrong ??
Regards,
Dennis :?
I installed it on my Dopod 818 Pro and it was working fine. However I noticed that the ringtone I assign for any profile is disregarded! It always plays the default ringtone.
So I had to remove it
[Posted to wrong thread]
I can't even install it... I just have this cab(?) file called Winmobileapps_PhoneProfiles.zip but what do I do with it? If I unzip it to my home pc, three files come out from it but none of them is an installation file (.exe)
-John
Try this link http://www.modaco.com/index.php?act=Attach&type=post&id=15580 then
Yeah, but the specific thing here is; Where do I put the CAB file on my device - which directory??? As you can see I don't know ANYTHING about Win CE
-John
Hi John,
you'll get used to it. I suggest you put the .cab on your SD-card, either via Act.Sync, a card reader or direct download with Pocket Internet Explorer (PIE). Then click it from within File Explorer to install. I've installed it to my storage folder (not the default location) & it runs well.
Another suggestion: get caninstl (google for it), then you can choose where to install cab-files far more easily & it got an option not to delete the cab after finishing the installation.
Regards, M
Nice work slvrbllt, everything that was missing in your first post in now in it. You made me happy hehe
V1.2.0 is out!
Question for Silver Bullet: I saw there is a new feature: Hi-Res icons added.
What is exactly the feature is (I haven't install v1.2.0 yet)?
Thanks!
Regards,
Arto.
@artosoft
Hi-res Icons are for VGA devices only... ;-)
Thanks for your appreciations.
is it possible to set a vibration to an incoming SMS without a ringtone?thanks
Hi slvrbllt, i have tried your other app Flightmode on my BA WM5 and it works great. I have a question on Phone Profiles; would it be possible to add control over the backlight and power save options? This would be helpful to create a profile for "Car" for instance where i need the backlight on and power save disabled for my GPS and would be easier to setup a profile to do this.
Thanks for your applications and hard work.

Macro recorder for PPC

Does anybody know about any aplication to record a macro (a sequence of actions) directly in PPC? I know some macro recorders but in connection with PC. The only one a found, Vito MacroRecorder, doesn't work properly in my Artemis. Could anybody work on this? Any suggestion?
Thank you.
No any response: solution
After having no response, I tried to make some changes in .ini file. And I have got a modification thats makes Vito MacroRecorder work correctly in my HTC P3300.
Thank you anyway.
I think "SK Schema" can do this, I have tried to figure it out but could't get my head around it. I wanted to make a script to update my rss feeds while I sleep. I was also told mortscript could do it, but how? I don't know.
Please post if you find a good solution.
Macrorecorder for ppc
hi OSCARARROYO .i have a htc touch diamond .please tell me what modifications you have made in the macrorecorder.ini file cause i tryed to change some numbers there but with no succes.please help
carmelm said:
i have a htc touch diamond. please tell me what modifications you have made in the macrorecorder.ini file cause i tryed to change some numbers there but with no succes.please help
Click to expand...
Click to collapse
Hi carmelm, if you still want to use a program like this, please pay attention to the new program Mobile Macros (http://artelplus.com/macros.php).
I can help you get it for free in case it just will not work on your device, and with your help we would have eliminated the problem.

Perfect Bluetooth Manager for WM5/WM6

hi y'all, developers like me, who upgraded from WM2/WM3 to WM5/WM6, i know they surely miss the Bluetooth Manager, which is in WM2 & WM3, it's always been a full-fledged tool for everything, like creating BT Headset connection, BT Dial up network, BT File Transfer shortcut etc. It also tells you the speed of all active incoming & outgoing bluetooth connections. While in WM5/WM6, there are only few basic features of switching off/on bluetooth and changing its visibility.
Screenshots below, in post#6.
This application will work both in WM5 and WM6, i got this application from FTP of this site(Thanks to Helmi), so felt like posting a link as well. Cheers...
http://rapidshare.com/files/78498277/Broadcom_Bluetooth_Manager.CAB
NOTE: TAKE A PRIOR BACKUP, BEFORE INSTALLING.
Any screenshots?
Am downloading now...will post some screen shots after I've installed.
Broadcomm stack
Well, first of all , this has it's own thread . Just search for boradcomm / vidcomm bluetooth stack , and you will stumble upon it .
As far as I know , the forum paid $ 100 for a developer who ported this from the IPAQ operating system.
I installed it once ,on a previous WM6 edition , and it worked ( but see below ) , but i'm unable to get it to work with the more recent editions .
It does work , but there are several drawbacks .
1) Bluetooth light doesn't work any more .
2) Runs out of memory from time to time .
3) Not very well integrated into the OS .
etc , etc .
But never mind me , give it a try and post the results . ( PM me too ! ! ! )
Ummmm, thanks for that heads up...makes me think twice about testing this any further now...
hi mates, as requested by u, i m postin' some screenshots of this application. In the meanwhile, i discover'd one more function. When u turn the bluetooth on, and go to the traditional file explorer(the default one), if u right-click on any file, it will give u an option to send via bluetooth, the best part, there will be a drop-down menu, for the paired bluetooth devices, so that u don't need to make a search again.
And i agree with Dakshithaw, i myself mention'd that i got this app. listed in the FTP of this site, felt like posting a link. Bcuz a novice user wouldn't serarch for BROADCOM STACK, would try for bluetooth manager or something like this. Bluetooth light workin perfectly fine here, however it runs out of memory and fails to start sometimes(1 in 10 for me), so i reboot and work it out. It's well integrated in the OS, This bluetooth manager opens automatically when u click on the icon of bluetooth . It's actually worth using it, bcuz of its utilities, interface etc. Adieu..
excuse me
hi there
would you mind having this uploaded here, cuz i am pretty sure that Rapidshare has no longer valid....thank you
Re: excuse me
queer~dude said:
hi there
would you mind having this uploaded here, cuz i am pretty sure that Rapidshare has no longer valid....thank you
Click to expand...
Click to collapse
Hi mate, initially, when i wuz postin' this application, i actually tried to upload it, in this thread itself. But it didn't work, it prompts "upload failed" i zipped it as well, but that didn't help either. So i gave up, and uploaded it to Rapidshare.
Just now, after seeing your reply, i tried to upload it again, no go. In fact, i discovered that i am unable to upload any file above 2MB. So, i have sent an e-mail to the webmaster, awaiting his reply..
You can either wait, or PM me your e-mail address, i ll mail it to you. The Rapidshare link is workin' fine, i tested it again.
________________
People say nothing is impossible, but I do nothing every day.
Caused major problems with my bluetooth radio - in fact messed it up pretty bad... TomTom stopped working, uninstalled this and TT started working again...but BT radio seems irreparably damaged I can't pair up with my car anymore...plus I've lost all sound! Oh man, I'm having to do a hard-reset now...
I tried this on Hermes with WM6. I had it maybe couple of days installed and i didn`t use any bluetooth accessories with it. Today i tried to unistall this program and it caused a hard reset! After unistalling device reboots and after splash screen there was only white screen. Several soft resets or removing battery didn`t help. Hard reset solved this...
i found this bluetooth manager also on LG KS20
Faced the music..
Sorry for the trouble, mates. In fact, i never felt like uninstalling it, nor do i have GPS, so didn't know the consequences. However, after readin' ur posts, i uninstalled it and faced it. The sounds went off, even mp3 files were comin' corrupt. Had to do a hard reset to resolve. But i ll have to install it back, b'cuz it works, as an utility for me. However, i ll just put a warning msg to take a prior backup.
______________
Alcohol doesn't solve any problems, but then again, neither does milk.
______________
Don't drink and drive, smoke and fly.
Re: excuse me
queer~dude said:
hi there
would you mind having this uploaded here, cuz i am pretty sure that Rapidshare has no longer valid....thank you
Click to expand...
Click to collapse
I have mailed the application to you.
TAKE A PRIOR BACKUP BEFORE INSTALLING.
______________
Alcohol doesn't solve any problems, but then again, neither does milk.
______________
People say nothing is impossible, but I do nothing every day.
rohitsharman said:
I have mailed the application to you.
TAKE A PRIOR BACKUP BEFORE INSTALLING.
______________
Alcohol doesn't solve any problems, but then again, neither does milk.
______________
People say nothing is impossible, but I do nothing every day.
Click to expand...
Click to collapse
Would u pls mail it 2 me or upload it here
Regards
Plz mail it to me
Hi rohitsharman, i want to try this application, plz e-mail it to me. I have already PMd u my mail address. Thanks a lot in advance.
Re: E-mail
The_hesham said:
Would u pls mail it 2 me or upload it here
Regards
Click to expand...
Click to collapse
Hey bro, i tried uploading it, didn't work. As i mentioned in the thread, i am unable to upload any file of more than 2 MB. I sent an email to the webmaster twice, no reply from them, THAT'S REALLY STRANGE.
I ll gladly mail it to u, but i think, i ll need ur email address for that.
I mean u have forgotten to pm me ur mail id.
______________
Don't drink and drive, smoke and fly.
Re: Plz mail it to me
sarah113 said:
Hi rohitsharman, i want to try this application, plz e-mail it to me. I have already PMd u my mail address. Thanks a lot in advance.
Click to expand...
Click to collapse
Hey sarah113, u are on, it must b there in ur inbox by now..
Adieu.
________________
Wise men talk because they have something to say; fools, because they have to say something.
bt on not work
hi
this software is not work on pda2k(BA) and this messege displaied when we turn on the bluetooth: (BTTrayCE)
the bluetooth radio failed to run On due to insufficient driver memory avialable. You must perform a normal reset before you can turn On the bluetooth radio.
can u solve this problem.
thnx.
Re: bt on not work
homam_france said:
hi
this software is not work on pda2k(BA) and this messege displaied when we turn on the bluetooth: (BTTrayCE)
the bluetooth radio failed to run On due to insufficient driver memory avialable. You must perform a normal reset before you can turn On the bluetooth radio.
can u solve this problem.
thnx.
Click to expand...
Click to collapse
Even i do get this msg sometimes, this happens when there are too many applications running in the background, already. Either close the idle applications, or do a Soft-reset. Try to run it after a soft reset, it would work.
Adieu..
_______________
F.E.A.R means F***K EVERYTHING AND RUN.
Does'nt seems to work on my htc touch !
Even after removing the soft, BT doesn't work anymore... May be must try an hard reset or flash again the phone.
Otherwise, the soft is in german language, where/how to modify/find the english version ?
Best regards.

HTC Touch HD just won't connect to my car

Hi you al, long time no see.
I recently changed phones from a HTC TYTN to the HTC Touch HD.
The TYTN did connect to my car BT (PHONE) with no problem at all. I don't need it for navigation because I have onboard navigation.
The new HD doesn't find the car's BT no matter what I do. I checked with my dealer and he told me that's because the car doesn't support this A2DP protocol...?
Is there no way to get around this problem?
I tried the Search button but most problems are about limited connection and possibilities but no relevant info about not connecting at all.
Any help would be great.
Greetings from Belgium
Anyone here with an idea..?
I've had no problem with my BT at all....well I did but that was because I'd forgotten to make my device discoverable...d'oh
Might help if you say what car
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
Change COD to: 5374476 (decimal) and soft restart phone.
Try this and don`t lose your old COD number if this patch doesn`t help.
Thanks Guys.
The car is an Audi A6 build 11/2007 with MMI + NAV, phone and voice dailing.
As I said, my TYTN paired with no problem at all.
I tried everything and even paired the Touch HD with other devices which worked perfectly.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S\COD
I sure would like to try this, but I'm not sure if I know how and were to find this...
Could you tell me this in a few words?
Thanks again.
Greetings from Belgium
Check if there are any other bluetooth devices added to your car - if they are then remove them and retry pairing them both.
Your HD should see the cars bluetooth and then go through the wizard to set up the connecton.
I had a similar issue on my BMW - this was the only way I got them to connect.
toemke said:
Thanks Guys.
The car is an Audi A6 build 11/2007 with MMI + NAV, phone and voice dailing.
As I said, my TYTN paired with no problem at all.
I tried everything and even paired the Touch HD with other devices which worked perfectly.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S\COD
I sure would like to try this, but I'm not sure if I know how and were to find this...
Could you tell me this in a few words?
Thanks again.
Greetings from Belgium
Click to expand...
Click to collapse
Use your registry editor application. Most roms come with one called RegEdit
Open it and use it like a file explorer and navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
@ arifhanid, Did that too, I removed all paired devices and tried again with no succes.
@ Fallen Spartan, I searched my HTC from top to bottom but I can't find a RegEdit program or something similar. Maybe I'm not looking in the right place... I'm not that familiar with going into the system altough, once I managed to change a German XDA II to English but that's a while ago...
If you could give me an extra tip or so? By the way, it's an HTC witch Dutch OS.
Anyway, thanks for the reply.
toemke said:
@ arifhanid, Did that too, I removed all paired devices and tried again with no succes.
@ Fallen Spartan, I searched my HTC from top to bottom but I can't find a RegEdit program or something similar. Maybe I'm not looking in the right place... I'm not that familiar with going into the system altough, once I managed to change a German XDA II to English but that's a while ago...
If you could give me an extra tip or so? By the way, it's an HTC witch Dutch OS.
Anyway, thanks for the reply.
Click to expand...
Click to collapse
All roms are differently and maybe yours doesn't come with a regedit though you can get free ones easily enough if you do a quick search in Themes, Applications and Software forum
Before you do that check to see if you have a standard registry editor by using your file explorer and navigating to /windows and search for a file called RegEdit.lnk This is you registry editor. Open this file to use. If you want this to appear on your programs list create a shortcut for this file and save it into /windows/Start Menu
Now if you go back into programs it will appear on your list
Nope, no RegEdit found in the (very) long windows list.
I guess I'll have to go and check the Themes, Applications and Software forum.
So, there I have look for a program named RegEdit and install it on my device.
Then I have to change that COD as FileFixer told me.
I'll try that.
Thanks.
toemke said:
Nope, no RegEdit found in the (very) long windows list.
I guess I'll have to go and check the Themes, Applications and Software forum.
So, there I have look for a program named RegEdit and install it on my device.
Then I have to change that COD as FileFixer told me.
I'll try that.
Thanks.
Click to expand...
Click to collapse
Just do a search for 'registry editor'. Should do the trick
Hello again Fallen Spartan,
So, I downloaded Advanced Configuration Tool V 3.3.
I didn't install it yet, but according to you, is this a good one?
Sorry for all my questions, hope this was the last one
Thanks!
toemke said:
Hello again Fallen Spartan,
So, I downloaded Advanced Configuration Tool V 3.3.
I didn't install it yet, but according to you, is this a good one?
Sorry for all my questions, hope this was the last one
Thanks!
Click to expand...
Click to collapse
Yes both it and HD Tweak are worthy additions
Thanks, I'll give it a try tonight.
Fallen Spartan said:
Yes both it and HD Tweak are worthy additions
Click to expand...
Click to collapse
Spot on thanks for that... Finaly got my Touch HD to ring instantly and a heap of other stuff sorted. You can't believe how annoying it was missing calls.
HD Tweaks is wicked
toemke said:
Hello again Fallen Spartan,
So, I downloaded Advanced Configuration Tool V 3.3.
I didn't install it yet, but according to you, is this a good one?
Sorry for all my questions, hope this was the last one
Thanks!
Click to expand...
Click to collapse
Hiya toemke,
The HD Tweak works great by the way. May I ask where you downloaded Advanced Configuration Tools 3.3 from? Only my searching ability left me none the wiser.
Regards
Johnnie.
Hello Scareypirate,
http://rs427.rapidshare.com/files/152929054/Advanced_Configuration_Tool_v3.3.cab
Greetings
scareypirate said:
Hiya toemke,
The HD Tweak works great by the way. May I ask where you downloaded Advanced Configuration Tools 3.3 from? Only my searching ability left me none the wiser.
Regards
Johnnie.
Click to expand...
Click to collapse
Here you go mate
Try Jetware bluetooth software
Hi
try this software "Jetware Handsfree Extension for windows mobile".
I was not able to connect to my Volvo kit before --- all my problems
solved now. Good luck.
It's a bluetooth extension etc....
http://www.jetwaremobile.com/

Categories

Resources