Hi you al, long time no see.
I recently changed phones from a HTC TYTN to the HTC Touch HD.
The TYTN did connect to my car BT (PHONE) with no problem at all. I don't need it for navigation because I have onboard navigation.
The new HD doesn't find the car's BT no matter what I do. I checked with my dealer and he told me that's because the car doesn't support this A2DP protocol...?
Is there no way to get around this problem?
I tried the Search button but most problems are about limited connection and possibilities but no relevant info about not connecting at all.
Any help would be great.
Greetings from Belgium
Anyone here with an idea..?
I've had no problem with my BT at all....well I did but that was because I'd forgotten to make my device discoverable...d'oh
Might help if you say what car
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
Change COD to: 5374476 (decimal) and soft restart phone.
Try this and don`t lose your old COD number if this patch doesn`t help.
Thanks Guys.
The car is an Audi A6 build 11/2007 with MMI + NAV, phone and voice dailing.
As I said, my TYTN paired with no problem at all.
I tried everything and even paired the Touch HD with other devices which worked perfectly.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S\COD
I sure would like to try this, but I'm not sure if I know how and were to find this...
Could you tell me this in a few words?
Thanks again.
Greetings from Belgium
Check if there are any other bluetooth devices added to your car - if they are then remove them and retry pairing them both.
Your HD should see the cars bluetooth and then go through the wizard to set up the connecton.
I had a similar issue on my BMW - this was the only way I got them to connect.
toemke said:
Thanks Guys.
The car is an Audi A6 build 11/2007 with MMI + NAV, phone and voice dailing.
As I said, my TYTN paired with no problem at all.
I tried everything and even paired the Touch HD with other devices which worked perfectly.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S\COD
I sure would like to try this, but I'm not sure if I know how and were to find this...
Could you tell me this in a few words?
Thanks again.
Greetings from Belgium
Click to expand...
Click to collapse
Use your registry editor application. Most roms come with one called RegEdit
Open it and use it like a file explorer and navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
@ arifhanid, Did that too, I removed all paired devices and tried again with no succes.
@ Fallen Spartan, I searched my HTC from top to bottom but I can't find a RegEdit program or something similar. Maybe I'm not looking in the right place... I'm not that familiar with going into the system altough, once I managed to change a German XDA II to English but that's a while ago...
If you could give me an extra tip or so? By the way, it's an HTC witch Dutch OS.
Anyway, thanks for the reply.
toemke said:
@ arifhanid, Did that too, I removed all paired devices and tried again with no succes.
@ Fallen Spartan, I searched my HTC from top to bottom but I can't find a RegEdit program or something similar. Maybe I'm not looking in the right place... I'm not that familiar with going into the system altough, once I managed to change a German XDA II to English but that's a while ago...
If you could give me an extra tip or so? By the way, it's an HTC witch Dutch OS.
Anyway, thanks for the reply.
Click to expand...
Click to collapse
All roms are differently and maybe yours doesn't come with a regedit though you can get free ones easily enough if you do a quick search in Themes, Applications and Software forum
Before you do that check to see if you have a standard registry editor by using your file explorer and navigating to /windows and search for a file called RegEdit.lnk This is you registry editor. Open this file to use. If you want this to appear on your programs list create a shortcut for this file and save it into /windows/Start Menu
Now if you go back into programs it will appear on your list
Nope, no RegEdit found in the (very) long windows list.
I guess I'll have to go and check the Themes, Applications and Software forum.
So, there I have look for a program named RegEdit and install it on my device.
Then I have to change that COD as FileFixer told me.
I'll try that.
Thanks.
toemke said:
Nope, no RegEdit found in the (very) long windows list.
I guess I'll have to go and check the Themes, Applications and Software forum.
So, there I have look for a program named RegEdit and install it on my device.
Then I have to change that COD as FileFixer told me.
I'll try that.
Thanks.
Click to expand...
Click to collapse
Just do a search for 'registry editor'. Should do the trick
Hello again Fallen Spartan,
So, I downloaded Advanced Configuration Tool V 3.3.
I didn't install it yet, but according to you, is this a good one?
Sorry for all my questions, hope this was the last one
Thanks!
toemke said:
Hello again Fallen Spartan,
So, I downloaded Advanced Configuration Tool V 3.3.
I didn't install it yet, but according to you, is this a good one?
Sorry for all my questions, hope this was the last one
Thanks!
Click to expand...
Click to collapse
Yes both it and HD Tweak are worthy additions
Thanks, I'll give it a try tonight.
Fallen Spartan said:
Yes both it and HD Tweak are worthy additions
Click to expand...
Click to collapse
Spot on thanks for that... Finaly got my Touch HD to ring instantly and a heap of other stuff sorted. You can't believe how annoying it was missing calls.
HD Tweaks is wicked
toemke said:
Hello again Fallen Spartan,
So, I downloaded Advanced Configuration Tool V 3.3.
I didn't install it yet, but according to you, is this a good one?
Sorry for all my questions, hope this was the last one
Thanks!
Click to expand...
Click to collapse
Hiya toemke,
The HD Tweak works great by the way. May I ask where you downloaded Advanced Configuration Tools 3.3 from? Only my searching ability left me none the wiser.
Regards
Johnnie.
Hello Scareypirate,
http://rs427.rapidshare.com/files/152929054/Advanced_Configuration_Tool_v3.3.cab
Greetings
scareypirate said:
Hiya toemke,
The HD Tweak works great by the way. May I ask where you downloaded Advanced Configuration Tools 3.3 from? Only my searching ability left me none the wiser.
Regards
Johnnie.
Click to expand...
Click to collapse
Here you go mate
Try Jetware bluetooth software
Hi
try this software "Jetware Handsfree Extension for windows mobile".
I was not able to connect to my Volvo kit before --- all my problems
solved now. Good luck.
It's a bluetooth extension etc....
http://www.jetwaremobile.com/
Related
Hi guys,
Since almost 350 Magician fellows have downloaded my application, I dare informing you all that I have released an updated version.
Come over my site and download it:
http://www.winmobileapps.com
See you there.
Bye.
slvrbllt said:
Hi guys,
Since almost 350 Magician fellows have downloaded my application, I dare informing you all that I have released an updated version.
Come over my site and download it:
http://www.winmobileapps.com
See you there.
Bye.
Click to expand...
Click to collapse
Hi slvrbllt,
Just been to your site. Many thanks for the cycle bluetooth app, just what I was looking for.
I tried your Phone Profiles app and its good but unfortunately conflicts with my Qtek firmwares flight mode - it's a long story.
Anyway I'm trying to remove the app but finding it a little difficult. It keeps saying that /windows/profiler.dll is open or read only even after a soft reset. Any ideas how I can remove the app? It suggests doing a stop all but no apps are listed there.
Thank you,
hi slvrbllt!! Can we assign only a vibration for the new SMS without ringing (for a silent profile for example with a vibration for the ring)? Thanks for this great update!bye
borgs said:
Just been to your site. Many thanks for the cycle bluetooth app, just what I was looking for.
I tried your Phone Profiles app and its good but unfortunately conflicts with my Qtek firmwares flight mode - it's a long story.
Click to expand...
Click to collapse
Have you tried DKToday? It's a great BT cycler & more.
@slvrbllt,
Very nice app. you can expect Dutch translations soon. Only thing I like as an improvement is small buttons to quick pick a profile or a possibility to put it in the tray.
Cheers, M
Hmm, looks Good...
borgs said:
slvrbllt said:
Hi guys,
Since almost 350 Magician fellows have downloaded my application, I dare informing you all that I have released an updated version.
Come over my site and download it:
http://www.winmobileapps.com
See you there.
Bye.
Click to expand...
Click to collapse
Hi slvrbllt,
Just been to your site. Many thanks for the cycle bluetooth app, just what I was looking for.
I tried your Phone Profiles app and its good but unfortunately conflicts with my Qtek firmwares flight mode - it's a long story.
Anyway I'm trying to remove the app but finding it a little difficult. It keeps saying that /windows/profiler.dll is open or read only even after a soft reset. Any ideas how I can remove the app? It suggests doing a stop all but no apps are listed there.
Thank you,
Click to expand...
Click to collapse
Try to uncheck Phone Profiles on Today Items before uninstall.
It works for me.
Regards,
Arto.
looks great, but there is a problem with my magician. it crashed when I try to run it, i just saw a window appearing and immideately disappearing .... (my system is runing windows mobile 2003 simplified chinese edition)
Artosoft said:
Try to uncheck Phone Profiles on Today Items before uninstall.
It works for me.
Regards,
Arto.
Click to expand...
Click to collapse
Cheers Arto, that's exactly what I was forgetting to do.
Thanks.
oltp said:
Have you tried DKToday? It's a great BT cycler & more.
Click to expand...
Click to collapse
Thanks, I gave it a try but it has problems with flightmode also (note. these problems seem to be due to a particular Qtek firmware). I think I'll stick with radiooff and CicleBT. Thanks for the info though.
I've downloaded and installed the software, it look good !!
But when I get an incomming call the callerid popup appears followed by a short beep, not the ringtone I setup in the profile... What am I doing wrong ??
Regards,
Dennis :?
I installed it on my Dopod 818 Pro and it was working fine. However I noticed that the ringtone I assign for any profile is disregarded! It always plays the default ringtone.
So I had to remove it
[Posted to wrong thread]
I can't even install it... I just have this cab(?) file called Winmobileapps_PhoneProfiles.zip but what do I do with it? If I unzip it to my home pc, three files come out from it but none of them is an installation file (.exe)
-John
Try this link http://www.modaco.com/index.php?act=Attach&type=post&id=15580 then
Yeah, but the specific thing here is; Where do I put the CAB file on my device - which directory??? As you can see I don't know ANYTHING about Win CE
-John
Hi John,
you'll get used to it. I suggest you put the .cab on your SD-card, either via Act.Sync, a card reader or direct download with Pocket Internet Explorer (PIE). Then click it from within File Explorer to install. I've installed it to my storage folder (not the default location) & it runs well.
Another suggestion: get caninstl (google for it), then you can choose where to install cab-files far more easily & it got an option not to delete the cab after finishing the installation.
Regards, M
Nice work slvrbllt, everything that was missing in your first post in now in it. You made me happy hehe
V1.2.0 is out!
Question for Silver Bullet: I saw there is a new feature: Hi-Res icons added.
What is exactly the feature is (I haven't install v1.2.0 yet)?
Thanks!
Regards,
Arto.
@artosoft
Hi-res Icons are for VGA devices only... ;-)
Thanks for your appreciations.
is it possible to set a vibration to an incoming SMS without a ringtone?thanks
Hi slvrbllt, i have tried your other app Flightmode on my BA WM5 and it works great. I have a question on Phone Profiles; would it be possible to add control over the backlight and power save options? This would be helpful to create a profile for "Car" for instance where i need the backlight on and power save disabled for my GPS and would be easier to setup a profile to do this.
Thanks for your applications and hard work.
There are some CAB. files for your Herald. They work on other devices and on Herald also!!! You should know what they are for when seeing their names!
The CommButton-Toggle-Vibrate-Fix: After installing this, you can switch your Herald into Vibration Mode by Comm.button (press an hold in 3 seconds)
Dateandtime.cab: Date and time will be displayed both on the taskbar but depend on you, you want them to be shown all the time or only on Today screen.(settings=> system=> clock & alarm=> more...)
WM VI Batti: Your battery life is displayed on the top of taskbar. Very nice!
HTC_X-Button: Is this the same function as whats included in the HTC roms. Same but more functions! This is new version!
Soft Key Applet: this allow to change the softkeys.
Have fun!
Nice dial skin!
This is a very nice dial skin. Please try and enjoy!
Another Cab files for Herald!
Dont ask, just try!
HTC Audio Manager
Have fun with it!
thanks for this, i dont know what some of the things in the first one do, i have the tmobile wing
but i got some htc audio booster and the dialpad and the audio manager
with the 10 button com thing, is the color going to be pink or does it match with the theme?
edit: nvm, the audio boost matched the theme so I guess that answers my question, thanks for the post!
nugift said:
There are some CAB. files for your Herald. They work on other devices and on Herald also!!! You should know what they are for when seeing their names!
Have fun!
Click to expand...
Click to collapse
Have you...yourself tried these on the Herald?
Mine will be here in a couple of days.
dwny said:
Have you...yourself tried these on the Herald?
Mine will be here in a couple of days.
Click to expand...
Click to collapse
I have tried all of them on my Herald, Trinity and Hermes! They run like hell!
blackout203 said:
thanks for this, i dont know what some of the things in the first one do, i have the tmobile wing
but i got some htc audio booster and the dialpad and the audio manager
with the 10 button com thing, is the color going to be pink or does it match with the theme?
edit: nvm, the audio boost matched the theme so I guess that answers my question, thanks for the post!
Click to expand...
Click to collapse
The 10 buttons Com does not match with the PPC's theme, it is green!
Battery Status & PsShutXP
They might be useful!
PPCPimbackup & nSuspend
Two more!
- nSuspend: set time to switch off your device.
- PPCPimBackup: Back up your data, mail, contacts (but no system data!)
Thanks...
Thanks for all, they are usefull tools!
nugift said:
There are some CAB. files for your Herald. They work on other devices and on Herald also!!! You should know what they are for when seeing their names!
Have fun!
Click to expand...
Click to collapse
F
First and formost thanks for posting all these great files. I hope this thread continues to grow. I really like the audio manager cab; it is much improved over the audio manager that came with my herald. However I have a few questions on the files included by the OP.
The CommButton-Toggle-Vibrate-Fix: What exactly does it fix? My function seems to work perfectly.
Dateandtime.cab: I am assuming this is the date and time on the task bar all the time?
WM VI Batti: I have no idea what this is for
HTC_X-Button: Is this the same function as whats included in the HTC roms?
Soft Key Applet: I assume this allows one to change the softkeys.
Could someone please elaborate on these cabs?
Phone Pad t9 input
Even though we have a very nice keyboard it's not always practical. For quick texts this works great.
nugift said:
Dont ask, just try!
Click to expand...
Click to collapse
I tried the Audio Booster file on my Wizard and it changed the skin on HTC Audio Manager. It also wouldn't allow me to check the box to activate the equalizer, so there was no sound change. Can someone check to see if there are extra settings needed to make this work?
jwzg said:
I tried the Audio Booster file on my Wizard and it changed the skin on HTC Audio Manager. It also wouldn't allow me to check the box to activate the equalizer, so there was no sound change. Can someone check to see if there are extra settings needed to make this work?
Click to expand...
Click to collapse
I experinced the same thing.
The CommButton-Toggle-Vibrate-Fix: What exactly does it fix? My function seems to work perfectly.
After installing this, you can switch your Herald into Vibration Mode by Comm.button (press an hold in 3 seconds)
Dateandtime.cab: I am assuming this is the date and time on the task bar all the time?
Date and time will be displayed both on the taskbar but depend on you, you want them to be shown all the time or only on Today screen.(settings=> system=> clock & alarm=> more...)
WM VI Batti: I have no idea what this is for
Your battery life is displayed on the top of taskbar. Very nice!
HTC_X-Button: Is this the same function as whats included in the HTC roms?
Same but more functions! This is new version!
Soft Key Applet: I assume this allows one to change the softkeys.
Correct!
You all can try, if not satisfied just remove!
jwzg said:
I tried the Audio Booster file on my Wizard and it changed the skin on HTC Audio Manager. It also wouldn't allow me to check the box to activate the equalizer, so there was no sound change. Can someone check to see if there are extra settings needed to make this work?
Click to expand...
Click to collapse
After installing this, at first you tip on the small frame 'Equalizer' than you choose the type of equalizer (classic, normal, bass Booter...) on the under frame and than the frme on the right. it allows you to change and activate the equalizer!
kennyidaho said:
Even though we have a very nice keyboard it's not always practical. For quick texts this works great.
Click to expand...
Click to collapse
Actually it did not work on my P4350, tha's why I did not introduced to you all. Maybe it works on some others, but not mine!
nugift said:
Actually it did not work on my P4350, tha's why I did not introduced to you all. Maybe it works on some others, but not mine!
Click to expand...
Click to collapse
Seems to work fine on mine. As to your earlier post answering my questions about the cab files. My 4350 has always went into vibrate mode when pressing the comm button. Perhaps earlier roms didn't.
nugift said:
After installing this, at first you tip on the small frame 'Equalizer' than you choose the type of equalizer (classic, normal, bass Booter...) on the under frame and than the frme on the right. it allows you to change and activate the equalizer!
Click to expand...
Click to collapse
Sorry but it still doesn't work. The box next to the equalizer cannot be checked and furthermore, when the settings are changed on the equalizer, the sound does not change. My gut feeling is that some registry settings are missing, but I don't have a Herald, so I have no idea if this is device specific or not.
what are you guys using for switching profiles ?
i'm looking for a basic profiles app along thelines of ppcprofiles or phoneweaver.
unfortunately, i cannot seem to get phoneweaver to work at all - changing profiles says that the notification has changed but it never does.
is anyone else having this problem or should i blame it all on tf3d ?
thanks in advance
I always use the SPB movile shell and want more profiles too!
you could use spb phone suite. it works but imho it takes up too much place on the today screen.
phenx said:
you could use spb phone suite. it works but imho it takes up too much place on the today screen.
Click to expand...
Click to collapse
i did try that and i agree - it's far too complex !
have decided upon a hard reset and retrying phoneweaver :-(
mrdo said:
what are you guys using for switching profiles ?
i'm looking for a basic profiles app along thelines of ppcprofiles or phoneweaver.
unfortunately, i cannot seem to get phoneweaver to work at all - changing profiles says that the notification has changed but it never does.
is anyone else having this problem or should i blame it all on tf3d ?
thanks in advance
Click to expand...
Click to collapse
Hi there all,
you could use the Touch HD\ HTC profile manager. It can be found under the Xperia Programs, Panels and tweaks section for the Xperia. I was also looking for the same thing a while back, and found that.
hope that helps!
winmowgster said:
Hi there all,
you could use the Touch HD\ HTC profile manager. It can be found under the Xperia Programs, Panels and tweaks section for the Xperia. I was also looking for the same thing a while back, and found that.
hope that helps!
Click to expand...
Click to collapse
Can you post a link please? I can't find it and neither can the search engine.
At the moment I use SPB Phone Suite and it integrates into the Mobile Shell panel, if you don't like it on your today screen.
Sorry, my mistake... first post! Link Contained.
Here is the link to the whole thread:
http://forum.xda-developers.com/showthread.php?t=441439
the section your after is under Touch HD utils its called volume control
Regards
Winmowgster
I dont think we are talking about the same thing? ... the volume control is just a new skin for setting the volume right? .. I think with profiles we mean like they are used in nokia phones where depending on your selected profile u ve a different ringtone, volume, message tone etc. ?
cause I d find something like this really useful .. at the moment I cant even figure out how to change the tone of when I receive a text message.
Looking at the Original Poster's request, I suggested a solution, which I thought fits the bill pretty well.
If you want to switch between silent, ring and vibrate then this does the job.
having read the request again, and googling the programs that mrdo tried, i see that i may have made a mistake. :S
The SPB Phone Suite is awesome! Well worth the dosh! Have as many profiles as you want plus automatic time or event based profile switching.
winmowgster said:
Looking at the Original Poster's request, I suggested a solution, which I thought fits the bill pretty well.
If you want to switch between silent, ring and vibrate then this does the job.
having read the request again, and googling the programs that mrdo tried, i see that i may have made a mistake. :S
Click to expand...
Click to collapse
thanks for your input. i do have the touchstone volume control installed and it's very handy but i am looking for something that will allow me to switch ringtones, alerts and volumes at the touch of a button.
after a hard reset and yet another reinstall of my apps, phoneweaver still doesn't work. grrr and double grrr.
mrdo, what is the problem specifically? Is there an error on the device or do you start the application but nothing of significance appears?
I briefly tried phoneweaver and had the latter problem. Couldnt figure out whether it was running or not.
In the end I ended up giving up and going for the Touch HD simple profile manager.
I don't find HTC profile manager in that thread, can u post the direct link?
winmowgster said:
mrdo, what is the problem specifically? Is there an error on the device or do you start the application but nothing of significance appears?
I briefly tried phoneweaver and had the latter problem. Couldnt figure out whether it was running or not.
In the end I ended up giving up and going for the Touch HD simple profile manager.
Click to expand...
Click to collapse
the application installs and seems to work properly but the alerts and ringtones don't actually change. not really sure what the issue is at this stage ...
nap007 said:
I don't find HTC profile manager in that thread, can u post the direct link?
Click to expand...
Click to collapse
it's just a larger volume control rather than a profile manager :
Blackstone Volumecontrol - WORKING ON EXPERIA
http://forum.xda-developers.com/showthread.php?t=442154
direct link :
http://forum.xda-developers.com/attachment.php?attachmentid=127106&d=1225749027
Hi there,
got a prob with QuickGPS and TomTom.
First TomTom says "no gps device" (or something like that - I use the german one). Tried everything, without success.
Then I tried to update QuickGPS. Download starts, but "crashes" before reaching 100%. Tried a lot, even via ActiveSync etc etc.
So I tried some QuickGPS Cab File from somewhere on the web. Installed it, tried to start it, without success, as it is not signatured digitally.
So deinstallation of this version, and now even the old one is lost.
My question:
1. Can anyone supply me with the official QuickGPS CAB of the latest official ROM (2.32...)
2. Can anyone supply me with the certain reg-info?
Thx in advance! About to face a hard reset - but not willing to...
I would advice you just to redo the last firmware.
You will be getting your Quickgps back.
There might be someone on here with a better idea, but most likelly you will be ending up with hard resetting anyway.
Doing it right now. Somehow this problem seems to be a pretty common one, but noone in all those forums ever placed a working solution. Bad luck, as I have had a lot of tools setup pretty well... But hey, thats windows!
What version of TomTom do you have? If tomtom says no device then you have to check your port(4) and baud(4800) settings and make sure you use the internal gps.
I had the same problem but
Mine is a HTC clone... I had the same problmes .
Quick GPS does not work at all at the clone, since they use another gps
( Hardware). But i got tom tom running using in the configuration the Bluetooth device on com port 3 , with 9600 .
There was a alternative Software for quick GPS, but, i am sorry, i forgot the name. Google may help.
i have a same problem.i have tried many way to download quick gps but i couldnt
http://www.ppc-pda.com/ you can solve that problem in here.
creativesss said:
http://www.ppc-pda.com/ you can solve that problem in here.
Click to expand...
Click to collapse
right, 'coz everyone speark turkish.
ok.you are right .
DaM79 said:
right, 'coz everyone speark turkish.
Click to expand...
Click to collapse
i have quickgps cab file but i dont know how can i add .cab file in here?
creativesss said:
i have quickgps cab file but i dont know how can i add .cab file in here?
Click to expand...
Click to collapse
Just reply to this post... go advance.. and attach file (click the paper clip icon)
Recommend GPSToggle for Jade Clones
ZongaBr said:
Mine is a HTC clone... I had the same problmes .
Quick GPS does not work at all at the clone, since they use another gps
( Hardware). But i got tom tom running using in the configuration the Bluetooth device on com port 3 , with 9600 .
There was a alternative Software for quick GPS, but, i am sorry, i forgot the name. Google may help.
Click to expand...
Click to collapse
GPSToggle, a Today screen plug-in, works well well with Jade Clones. I have attached the CAB file to this reply. You will find a full discussion of GPSToggle in this thread:
Customize your Jade Clone - The Clone Wars (have started). . .
Hello,
I was wondering if there is a way to print or send to an excel file the list of calls made or received?
Another thing, is there a way to control the time of ONLY calls that you've made? If I go to the calls counting (in Portuguese "Contadores de Chamadas") I have the registry of ALL calls made and received. I can't control the time that I've spent where I've started the call (that can be very useful if you have minutes to spend), I only know the time spent on the phone.
Thanks in advance
I am also looking for a way
http://forum.xda-developers.com/showthread.php?t=676123
teriero said:
I am also looking for a way
http://forum.xda-developers.com/showthread.php?t=676123
Click to expand...
Click to collapse
The only help I know:
Phone.Dashboard.Minute.Tracker.v1.1.7.
bib*oops said:
The only help I know:
Phone.Dashboard.Minute.Tracker.v1.1.7.
Click to expand...
Click to collapse
And this app will work on WM6.5? I've made a google search and the last version found was 2.0.1 and I see that this application was made in 2007
This problem is really stupid... any 30,00€ nokia can track the time of received or made calls
Yes it does !
rvrosa said:
And this app will work on WM6.5? I've made a google search and the last version found was 2.0.1 and I see that this application was made in 2007
This problem is really stupid... any 30,00€ nokia can track the time of received or made calls
Click to expand...
Click to collapse
I'm using this program now for some years, and it works perfectly on almost all WM versions !
I started with WM2003 and now on my Mega with WM6.5 it still works perfectly !
My present version is 2.0.1.
Regards
cimber
The program works very well for the Mega.
But how to save the call log (Call log) on a PC?
Export
teriero said:
The program works very well for the Mega.
But how to save the call log (Call log) on a PC?
Click to expand...
Click to collapse
Just transfer the *.csv file via activesync or any filemanager to your PC.
Regards
cimber
Good program.Thank you and greet
Where can I get this program? Is there a link to download?
Thanks
rvrosa said:
Where can I get this program? Is there a link to download?
Thanks
Click to expand...
Click to collapse
http://www.pocketgear.com/de/usd/3685431,product-details,Phone-Dashboard-Minute-Tracker.html
It's strange... I've download it and installed it, but the program doesn’t appear anywhere!
I’ve searched on all programs but nothing…
And I’m sure it’s installed because it appears on the “uninstall programs” as HudsonMobile PhoneDashboard.
Any suggestions?
Did you the following ?
As far as I remember, it was necessary to make a softreset on this program after installation.
Otherwise it's depending on your user interface, what you need to do.
For sure you can find the program either in the directory "programs" or a localized name e.g.
in german "Programme"
and a link in the following directory "windows/autostart".
If its not there, you need to make a link to there.
Regards
cimber
It's strange... I've download it and installed it, but the program doesn’t appear anywhere!
Cause to view it you need to disable TouchFLO and turn on Phone Dashboard.(settings/today/Items)
Phone Dashboard is a plugin "naked" today screen.
Unless you use an alternative overlay interface f.ex.SPB MShell-then simply tap the "show today".
Alternative:ShellSwitcher http://forum.xda-developers.com/showthread.php?t=675903
teriero said:
It's strange... I've download it and installed it, but the program doesn’t appear anywhere!
Cause to view it you need to disable TouchFLO and turn on Phone Dashboard.(settings/today/Items)
Phone Dashboard is a plugin "naked" today screen.
Unless you use an alternative overlay interface f.ex.SPB MShell-then simply tap the "show today".
Alternative:ShellSwitcher http://forum.xda-developers.com/showthread.php?t=675903
Click to expand...
Click to collapse
Please elucidate me
First I install the Phone.Dashboard.Minute.Tracker, then when I need to use it I have to change from TouchFlo to Phone Dashboard?
But if I use the TouchFlo the program is working and registering all, right? To see it I only need to turn TouchFlo off, right? Or I can no longer use TouchFlo?
Don't exist another program to control the time used in calls that don't need all this? I think is something so simple compared to other things that WM can do...
Thanks
rvrosa;Don't exist another program to control the time used in calls that don't need all this? I think is something so simple compared to other things that WM can do...Thanks[/QUOTE said:
If you're mainly TouchFLO, I recommend Festinger Historia.
After registration, you can try freeware version 1.11.
http://www.festinger.net/
Click to expand...
Click to collapse
teriero said:
If you're mainly TouchFLO, I recommend Festinger Historia.
After registration, you can try freeware version 1.11.
http://www.festinger.net/
Click to expand...
Click to collapse
I don't like or dislike touchLFO... I don't know or ever used something else to know if it's better or worst. I had a Nokia 1100 and I've bought this phone with touchFLO... To me is OK since it works.
Do you think there exist better than touchFLO? Give me some links that I can look
About this festinger I'll give it a look to see.
Thanks
Ok, I've downloades festinger (v.3.1.2) and tried it.
Good but not so good...
The registration is month by month. If I charge my phone on day 10 or 15, or more than once each month I can't get the info I need.
It should let me choose the period to show.
Historia became Free!
Hi, I'm happy to announce that all versions of Historia are now freeware. feel free to download and install it.
Thank you for sharing
Thank you for sharing.Best regards Ronenfe.
rvrosa said:
This problem is really stupid... any 30,00€ nokia can track the time of received or made calls
Click to expand...
Click to collapse
Touch2 Has it's timer for calls too .... Start =>> Settings =>> System =>> Device Information =>> Call Duration ... Outgoing and Incomming ... i think this is what u're lookin for ?