Related
I have flashed my rom with Jeff's Romkitchen to PPC2003. All works very good.
However I hav unfortenately forgotten to write down the settings to connect with GPRS for O2 NL. Can anyone supply me the settings.
TIA, Jeffrey
Solved
I've already found the solution. Problem was that I had choosen for 'cellular line (GPRS)'. When I choose 'cellular line' all went well.
Jeffrey
Hi Jeffrey,
You are more lucky than me. I lost the CD last year, so i do not have the autoconfiguration tool anymore; what is the O2 NL GPRS Internet dialstring?
tx
Hi BigRick,
Fun that we communicatie in English since I live nearby you (sweetlake).
The string is as follows:
- country code = 31
- area code = 99
- phone number: ~GPRS!
Be sure to pick as modem "Cellular Line" and NOT "Cellular Line (GPRS)".
Suc6
Thanks/Dank!
Here are the O2 NL settings for MMS
http://ikkoku.o2.nl/help_qa.php?group_id=14&faq_qa_id=472&persoonlijk=true
you have to change your prescribed services, call 0800-4444444 for that
O2 NL GPRS Settings
Here is the info some of you are seeking for printed in the O2 NL usersguide:
Name profile: GPRS
Cellular line (GPRS)
APN: internet
Username: GPRS
Password: password
Wap O2
Cellular line
+31626000222
Username: O2nl
Password: password
IP: 193.113.200.195
url: wap.o2.nl
Greetings
Anyone tried getting imode to work on the xda?
I have been able to connect to the GPRS network of my imode provider and i get this config:
IP: 172.23.80.111
Netmask: 255.255.0.O
Gateway: 172.23.0.1
DNS: -
I did a pingsweep on the network 10.10.100.0/24 and i got these addresses replying:
10.10.100.10
10.10.100.13
But i'm still not able to connect to the internet, i need a proxy and a dns address.
Anyone knows anything about this?
I have BASE (belgium) as provider (part of KPN)
thx
These settings will enable you to use IMODE on your xda for BASE.
APN: portalmmm.nl or [blank]
Username: [blank]
Password: [blank]
Proxy: none
DHCP: yes
DNS: automatic
Then fire up Ezos Ez-WAP and configure a this as gateway
ip: 10.10.100.10
port: 9201
this is a connection oriented WAP gateway
now surf to http://menu/gprs/mn/main.aspx for the imode menu
We found an http proxy running on 10.10.100.10 5080. So when you connect with the settings above, en set this proxy server, you should be able to surf normal website (== NON imode stuff)
Also, it's possible to setup an http tunnel where you can tunnel you traffic trough, so you 'll have a full internet connection
Imode on XDA II
Hi,
Just got my first XDA today,
a T-Mobile MDA,
Released the SIM-lock trough the new "soft-version method" on this site (perfect, thx again!),
Put my KPN I-mode SIM in the MDA,
Am lost now on how to get I-mode going and would love to accomplish full internet functionality
Found another thread here;
http://forum.xda-developers.com/viewtopic.php?t=5997&highlight=imode
wich says it's not possible on the XDA II wich I think is BS, if it works on the XDA I, why not on the XDA II??!!
Need help and am yet very unexperienced with the use of pocket-pc...
thx for replies!
i-mode on qtek 2020
I have i-mode access on my qtek 2020.
I set up the gprs connection and proxy (port 5080) like for xda.
PIE does not show all i-mode pages (user agent i think).
I tried EZ wap 2.5 and this one show the start menu http://gprs/....
imode - netfront
Imode works fine for me on a german T-mobile MDAII.
also imode mail, but you need to use netfron 3.0 or 3.1 for this and change the user agent.
normal http works fine also, bt no MSN messenger (but you can use
emessenger).
I use a Base pre-paid card.
It aloso works in Holland and Germany with the same Sim card and
only 7 euros / month
Imode Base / netfront / Tunneling
Hi all,
A few months ago, I could manage to surf with Imode on my XDA2.
1 Netfront 3.0 ok too but Netfront 3.1 does not work on XDA2 for GPRS connexion, I even obtained a refund from them.
2 Can you give me more details on how to tunnel forfull access ? I have tried but not successfull. I would like to be able to gain POP3 access.
Thanks,
Stéphane
hi, i read here about the email settings.
Can anybody give me a hint how to set up my s100 for receiving normal pop mail?
- what are the settings? (I tried my outlook setting but don't work)
- what is outgoign server available?
For imode mail? What are the settings ?
Thanks so much
hoe met ik mijn qtek 2020 dan instellen ?
kan je deze noob aub stop voor stap uitleggen dank bij voorbaat
how do i have to do this ?
please guide me step after step
thanx
what is iMode ??
I can not get imode worked use my XDA on o2.
I upgraded my PDA2K from Windows Mobile 2003 to Windows Mobile 2005.
Can anyone tell me where I can download the O2 UK PAYG cab file for Windows Mobile 2005.
Also, MMS isn't available any more after the upgrade.
Can anyone tell me how to restore it?
In my previous post, I should point out that I am seeing no menu for MMS in messaging at all.
look for mms info here
http://forum.xda-developers.com/viewforum.php?f=42
If you can find a place to have it setup, key in these values
o2 MMS settings
Access point name: wap.o2.co.uk (contract customers) or payandgo.o2.co.uk (pay-as-you-go customers)
Username: o2wap (contract customers) or payandgo (pay-as-you-go customers)
Password: password
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 193.113.200.195
Session mode: Permanent
URL address: http://mmsc.mms.o2.co.uk:8002
Thanks a lot for the advice. I appreciate it. But let me be a bit more more specific on what I'm looking for. I am on O2 PAYG on my PDA2K (Blue Angel). I upgraded it to WM5 via ebay. Before the upgrade, I had a WM2003 cab that installed all the O2 UK PAYG settings. Before the upgrade, I had MMS (picture messaging) in the text messaging menu but now it is not there as an option. I have Pocket Outlook and text messages, but no sign of a menu for multi-media messaging. I would like to be able to send picture messages. Also, to access the "O2 Active" site via WAP, I understand (from reading O2's web site) that MMS needs to be installed. I can't seem to access O2 active at the moment. I get an error.
Please is there a patch or cab for that will install MMS in the messaging menu on my PDA2K device now that I have WM5? Also, is there a patch or cab to install the O2 UK PAYG connection settings? If there are patches or cabs, I'd like to be sure they are appropriate for my upgraded device and will install OK on the new ROM and not mess anything up.
I already have the cab for O2 PAYG connection settings for my imate PDA2K when it was WM2003 but I don't want to risk trying to install it on the upgraded ROM device in case it does something bad.
If there are no cabs for my upgraded ROM, could I get away with installing Blue Angel PDA2K WM2003 cabs or would this cause problems?
Thanks
2005 is beta and not a final release
no operators support 2005 on those older devices
cab files are made by the operators with their settings
mms composer is a 3th party mms program which integrates with outlook
mms composer in it's current version (unless that changed) is not compatible with 2005
there is another mms program which is compatible but as far as i know dont integrates with outlook you can find it if you search in the windows mobile 2005 forum after mms i would think
your best option is doing the search for the mms program
and manualy typing on the mms, gprs and wap settings in your phone
Thank you for explaining this to me. Now it is clear in my mind.
Which windows mobile forum are you referring to?
MMS client
The only MMS application I could find after a lengthy web search was PixerMMS. There is a beta available for Pocket PC Phone edition and Pocket PC.
Click on:-
http://www.electricpocket.com/products/pixermms.html
then scroll down towards the bottom of the page.
I've e-mailed to Electric Pocket support to ask about compatibility with WM5.
Which windows mobile forum are you referring to?
Click to expand...
Click to collapse
you are in the network forum now
windows mobile 2005 is yet another forum on this site
i did a search for mms and clicked the dropdown box as to which forums it should search picked windows mobile 2005
and 3th result was this one
http://forum.xda-developers.com/viewtopic.php?t=28222&highlight=mms
Sorry - posted this originqlly as wifi and not GPRS
Currently in Andorra about to go to france then spain and trying to get my Wizard to work on GPRS using an easy mobile sim.
The settings are shown on...
https://www.easymobile.com/selfcare/emcontent/cust_services/customer_intro.html#11
as....
GPRS
Account name – eM GPRS
Homepage – http://wap.easyMobile.com
User name – leave empty
Password – leave empty
Access point settings
Proxy – Enable
Proxy address - 149.254.201.135
Proxy port – 8080
Data bearer – GPRS
Bearer settings
GPRS access point – data.uk
Authentication type – Normal
User name – user
Password - one2one
And I could not get it to match the setup on my device.
The only place I could see a port setting for a proxy was on the modem set up.
Can anyone show how these should be arranged in the format shown in the spec of my phone shown below (UK Tmobile)
Thanks in advance
I tried easymobile customerservices from france and they told me to call the local french company (which flicks between bouygtel and orangefrance with sfr banned) but i dont speak french and there is nothing about it on either of their sites - i am now in andorra - but the internet cafe i am in has no java enabled so I cannot try for better luck on the easymobile CS chat help page.
I guess the asking the local co is **** as my tmobile settings were working when i got here without change but i had never set my phone up for easymobile before I left - but i guess it is those settings that would work and the CS person had less of a clue than me!
My Tmobile sim is still in france - and i guess i will have buggered the settings to get Tmobile roaming too as I tried so many things - so even more in a hole.
HELP PLEASE!!!!!!!!
back in frqnce and back to **** keyboards
azertyuiop
qsdfghjklm
wxcvbn
the messqge from the mobile issomething like...
"no modem found at that number"
for some reason mine aint working
i was wondering if anyone has them?
if not is there like a software that can automaticlly set it up like you have in the Windows Mobile systems?
I just got mine from Orange after rooting and installing the MoDaCo ROM...
Go to menu>settings>wireless controls>mobile network settings>access point names
menu>new APN
Then enter the below details. They are case-sensitive:
Access point details (case sensitive)…
Data:
Name – Orange GPRS WAP
APN – orangewap
Proxy – 192.168.071.035
Port – 8080
Username – Orange
Password – Multimedia
APN_Type – <blank>
MMS:
#Name – Orange MMS
#APN – orangemms
#Username – <blank>
#Password – <blank>
#MMSC – http://mms.orange.co.uk/
#MMS Proxy – 192.168.224.010
#Port – 8080
#APN_Type – MMS
Orange UK MMS settings
I spent nearly 6 hours yesterday trying to get my MMS messages to send using Orange using my HTC Hero! I looked through all of the sites on-line and all of the many settings that were suggested, from the Orange website itself to ones like this. I finally found the problem! As I was sat in my office at home, I was using my broadband connection via wireless to setup my email, etc and realised that you can’t send (or receive the picture part of) MMS messages over the data network if wireless is enabled!
The phone must be trying to use the wireless network to send the data as it would with other data and only turns to the phone 3G/G+/HSDPA network if no wireless is connected!