Related
I tried to set the Intellipad as the default SIP but after a soft reset it reverts to Keyboard automatically.
Switching it manually before replying a message sometimes works and sometimes doesn't.
I tried re-installing Intellipad, but still have the same problem. I'm using the QTEK 1.11 ROM.
Anyone else experiencing the same problem?
It is true that after a soft reset the sip will go back to default, keybord. To change it you has edit the registry at HKCU\ControlPanel\Sip by changing the "DefaultIm" value, but I don't know the value for Intellipad. For Block recognizer as default sip change the value to {42429691-ae04-11d0-a4f8-00aa00a749b9}. Maybe other know the value for intellipad...
I've encountered that before, just use tweak2k2net and disabled those inputs that you do not need to use, leave only phonepad & keyboard (for me), perform a software reset and it will work again. (I've even have tengo Thumb keyboard) installed as well.
Have you got a link for tweak2k2net ?
I found it
http://www.tweaks2k2.com/
Unfortunately none of these suggestions worked. I can live with the SIP switiching to keyboard as default. What I can't stand is the fact that I have to reset my PPC every time I switch from Keyboard to Phonepad and vice versa.
Can someone pls try switching between keyboard and Phonepad for a couple of times and see if it works fine?
I have no problems what so ever.
Running ROM 1.11.00 on Qtek S100
It was determined by a very helpful person on PocketPCThoughts.com that resources for the SIP are shared with the Today plug-ins. So, if you have too many Today plug-ins or one Today plug-in that is resource intensive, chances are that your third-party SIP will fail to function.
I verified it by disabling all the Today plug-ins and it worked like a charm upon the next reset. Then, I started enabling the plug-ins one by one until I found out how much it can take before Intellipad (or TenGO Thumb) will just pull up the keyboard.
Too bad it's a Microsoft issue.
One of the few programs that seemed to have overcome this issue is Spb Full Screen Keyboard. I think Resco Keyboard is another one, but when they don't satisfy your needs, who cares about these two products.
I really enjoy Intellipad and the new TenGO Thumb, but you'll have to realize they are sensitive to the available resources that the Pocket PC provides. Perhaps contacting the developers would make them see the light, but I doubt it much.
I'm trying to see if I can come up with an alternative to the many Today plug-ins I have. I tried Snoopsoft Dashboard, but I got the same results, but of course, this is after many installs/uninstalls. I'm going to start fresh with a hard reboot and rebuild my Pocket PC software setup from scratch.
You can read the correspondence of how I got this issue addressed on PocketPCThoughts here:
http://www.pocketpcthoughts.com/forums/viewtopic.php?p=353877
BeyondtheTech, thanks very much for your reply. That explains it! I just need to decide which plug-in I can live without, SPB pocket plus or PhoneAlarm :-(
Hi,
I've installed Skype and Acrobat Reader v2.0 on my brand-new Qtek 9000 (Italian ROM, v. 1.13.75 ITA). Even though both are supposed to be compatible with WM5.0, none of them happens to work. When I tap on the respective icons, a rotating raibow-disk cursor shows up - as if the application was being loaded - than it disappears and nothing happens. The application doesn't even appear in the list of running programs under Settings/Memory. I've tried unistalling and reinstalling many times, both on the device and on an external storage card, with no results.
Does anybody know how to solve this problem?
Ciao,
RoB
RE
Acrobat Reader v2.0 installed on my SD card works well without problem
both work fine on my SPV @ Qtek 9000
I had the same problem with Skype.....looks like it is starting but then nothing happens That said, it did load up once or twice.......out of loads of attempts !
I had the same problem with the Acrobat Reader newest version.
Finally i uninstalled it.
Problem solved with Skype!
Hi,
the new version of Skype for Qtek 9000 works fine, now! You can download it at he following URL:
http://skype.com/products/skype/pocketpc/download.html?device=qtek_9000
I still have problems with Acrobat Reader for Pocket PC v2.0, though... I wonder how the same program can behave differently on supposedly identical devices. Evidently, the problem depends on some "extra flavours" added by the various brands that commercialise the Qtek 9000. By the way, my device is unlocked, that is it can accommodate any SIM card.
Any advice on registry tweaks that can help solve the problem? Since Acrobat Reader DOES run on other Qtek 9000 devices, it definitely cannot be a serious compatibility issue.
Acrobat Reader works if Pocket Hack Master is not running.
I had the problem with Acrobat Reader 2.0, but it worked in 'Safe Mode' (Part of SBP Pocket Plus). So I set about running various apps to find the conflict, and it works just fine for me if I exit Pocket Hack Master before loading acrobat.
Hope this helps.
I've heard rumours about only the english version of Acrobat Reader is running on WM 5 at the moment.
@riccioberto: I suppose you used the italian version?
Best regards,
tomestos
Acrobat Reader now works but can't be uninstalled!
Hi,
I followed tomestos' advice and downloaded the english version of Acrobat Reader for Pocket PC.
Before installing it, I unistalled the Italian version from the PDA by using ActiveSynch (I used the command for removing the application from both the PC and the PDA).
ActiveSynch DID NOT remove the application actually, but it DID remove it from the list of installed applications on the PDA!
When I tried to install the English version, I was asked if I wanted to uninstall the Italian version before. I replied "yes" but the application could not be uninstalled, so the installation of the new version failed...
But - this is the incredible part of the story - now Acrobat Reader works! It is in English and characters on screen are awful - not exploiting VGA mode, I guess -, but works.
The only problem is that I can't uninstall it in the normal way, so I'll probably have troubles with installing new releases.
Any idea on how to solve this further problem?
Regards,
Roberto
Adobe Reader Issues / Solutions
There are a number of Acrobat issues I am aware of and some solutions. Would love some help with the rest!
I have an Imate JasJar (and previously a PDA2k). These come with an application "ClearVue PDF" which allows you to view PDF files. However it doesn't "reflow" the text to make it easier to read on a small screen and doesn't support ebooks which are encrypted with Adobe's DRM. (Just about any ebook you pay for.) Therefore I prefer Adobe Acrobat Reader which is free. The only downside is the memory used and hassle for installing.
Issue 1 - ClearView PDF
After you install Adobe Acrobat; ClearVue PDF is still the default application for openning PDF files.
I have not found a way to uninstall ClearVue PDF. However as there appears to be no executables under program files then I don't believe you would save any memory. I only wish they didn't waste ROM space but that's outside my control. (I'm not into hacking ROMs.)
The easiest solution is to use a registry editor to delete the key...
PocketPC\HKEY_CLASSES_ROOT\pdffile
...BEFORE installing Adobe Acrobat Reader. The install then sets up the correct file associations and all is well.
Issue 2 - Acrobat starts and then closes
I have found that if you install Acrobat Reader to a storage card then...
You can launch the application and open a file - works OK.
If you open a file from Explorer (or other tool) then Acrobat appears to start up. It even shows you the reflow warning message. However it then closes! (Making it pretty useless.)
Work-arround - Install to memory. Not great because the Jasjar doesn't really have enough memory for my usage. (Today screen apps really need to be installed in memory in case you need to take out the card.)
Solution??? - Help!
Issue 3 - Activating
I've had lots of hassle activating both the PC version and the PPC version.
Solutions...
a) Install the latest version/update on the PC.
b) Disable any local (PC) firewall.
c) Use an internet connection that doesn't require a proxy server.
After that your on your own...
Anyone else???
Try this tip... it works from a SD card for me on my Universal.
http://www.aximsite.com/boards/showthread.php?t=103786
I have installed the new official ROM for the Dopod with GPS enabled.
The problem is when I installed the arabic software (tried two different software), or even Resco Keyboard Pro, i can not swap the SIP to any except the windows preloaded ones.
I tried to play with the registry but could not find the right key.
Any Help please???
Calligrapher 2005 can't work either. Any suggest?
You have to restart the device before you can use third party SIP. Resco Keyboard pro worked after restarting my dopod d810.
Calligrapher 8.3 won't work for me either. Going to upgrade and see.
Finally it works! I doubt it was the upgrade to 8.4, but rather the many resets I did.
jnraptor said:
You have to restart the device before you can use third party SIP. Resco Keyboard pro worked after restarting my dopod d810.
Click to expand...
Click to collapse
yes - but another reset it will stop , then might work or not,,
I tried the Resco Keyboard Pro, and it didn't work, after many resets etc. On their support page they explain that it's a wm5 problem related to HTC devices, but their solution doesn't work for me.
Too bad...uninstall.
I bought the Stowaway Bluetooth Keyboard (a.k.a. Dell Axim Executive Keyboard with Wireless Technology. Now, the keymapping seems to be off.. that is, the RFn-2 key produces a "@", while the layout on the keyboard shows quotation marks... I've tried the different Layout Settings, but couldn't find the right one. It seems to be an .kbd file, stored on my memory card. Does anyone have experience in editting such a file? What software should I use? Thnx.
I have the same keyboard, using the last German WM5 driver of the now defunct manufacturer (drivers can still be found on the net). If you install the driver of your language version to the device, not the memory card, all keys should be mapped correctly.
Installed on device, still wrong mappings. Could you provide your .kbd file online? Would that solve the problem?
ps. I found my driver on :
http://support.dell.com/support/dow...1&impid=-1&formatcnt=1&libid=17&fileid=139841
Were did yours come from?
I never had to mess around with a .kbd file, so cannot help you there. Drivers are here:
http://corporate.igo.com/support/Drivers.asp?ManufacturerID=7&ModelID=16
There was ever really only one type of such keyboard, so I guess key is to find the right driver. If not under Dell, try the HTC drivers instead, use the WM5 drivers for the Prophet phone (Version 4.51)
Hi
I have one of those ipaq foldable keyboards (bluetooth) and I'd like to get this working on Windows Mobile 6.1 to use it on my touch diamond.
The original driver which ships with the keyboard doesnt appear to work on Windows Mobile 6.1 (I think its designed for 2003) but it seems the bluetooth layer is working perfectly....
The keyboard itself presents itself as a bluetooth serial port which can be paired and connected to the touch diamond... problem is how to get the serial port used for keyboard input
Any ideas?
Thanks!
Solved
I've developed a small application which wraps the serial output into the API.
** EXPERIMENTAL ** USE AT OWN RISK **
1. Ensure you have NETCF 3.5 installed on your device.
2. Extract the .exe file from the zip archive and save it somewhere on your device.
3. Pair your keyboard via bluetooth.
4. Create an outgoing serial port (any port from COM1 through COM9)
5. Fire up the saved application.
6. Select the COM port used in #4 above and click on CONNECT - If the connection fails exit application and repeat from step #3
7. Test connectivity by pushing shift/caps lock.
Can't get this to work
Hi there
Tried to install this on an HTC Touch HD and it doesn't work unfortunately... I get an error message but apparently need to install a special cab file from microsoft containing .NET CF 3.5 error messages?
If you feel like having a go at getting this to work would very much appreciate it!
ONLawson said:
Hi there
Tried to install this on an HTC Touch HD and it doesn't work unfortunately... I get an error message but apparently need to install a special cab file from microsoft containing .NET CF 3.5 error messages?
If you feel like having a go at getting this to work would very much appreciate it!
Click to expand...
Click to collapse
Hi
You just need to install .net framework 3.5 and it should work
Hi!
I only can create COM6 or COM7 as outgoing ports... Any solution? Thank you!
lilitz said:
Hi!
I only can create COM6 or COM7 as outgoing ports... Any solution? Thank you!
Click to expand...
Click to collapse
I will amend the application to enable you to specify a COM port.. unfortunately this can only be done when I am home so check back in a few hours....
lilitz said:
Hi!
I only can create COM6 or COM7 as outgoing ports... Any solution? Thank you!
Click to expand...
Click to collapse
I've updated the application and the connection process as can be seen in post #2.
Great work!!! It works perfectly.
Only two questions:
It's possible to hide the win keyboard screen?
Could you add -in a future- a key repeat?
Thank you very much!
lilitz said:
Great work!!! It works perfectly.
Only two questions:
It's possible to hide the win keyboard screen?
Could you add -in a future- a key repeat?
Thank you very much!
Click to expand...
Click to collapse
I'll add keystroke repeat at some stage but its beyond what I originally anticipated so dont hold your breath until then
Some of the special function keys dont function yet either but as they are not really used it didnt make sense to add them initially.
Finally I got the keyb screen hidden, but if I hide it, the space bar key doesn't work. Otherwise this app is very very very usefull .
Andret: Did you try to install Widdcomm Broadcom Stack on your Diamond? I readed somewhere that there's a version compatible with HTC Hermes, I don't know if it can be used with your phone....
I tried to contact with darfon (without response yet) to ask them for the service manual of G950, I disassembled the keyb and there's a jumper connector in the motherboard, I wonder if it's possible to turn it into HID soldering a bridge there...
Greetings and thanks again.
lilitz said:
Finally I got the keyb screen hidden, but if I hide it, the space bar key doesn't work. Otherwise this app is very very very usefull .
Andret: Did you try to install Widdcomm Broadcom Stack on your Diamond? I readed somewhere that there's a version compatible with HTC Hermes, I don't know if it can be used with your phone....
I tried to contact with darfon (without response yet) to ask them for the service manual of G950, I disassembled the keyb and there's a jumper connector in the motherboard, I wonder if it's possible to turn it into HID soldering a bridge there...
Greetings and thanks again.
Click to expand...
Click to collapse
I dont have an issue with spacebar when I hide the popup keyboard.... I do occasionally get an issue when the spacebar doesnt work but I havent figured out what the reason for this is.... it seems to be rather random 1 out of 20 or so times I connect/reconnect the keyboard.
I've never opened the keyboard but I too have wondered about getting it into HID mode since it seems some of the later ones from HP support both HID and SPP.
I've never tried instaling a different type of stack on the phone... the app works fine as it is on my wife's diamond and was originally developed on my touch pro actually until it worked and then off to the diamond... not much use for it on the TP as it has a hardware keyboard.
Thanks!!!
This driver works great! thank you for the effort that you put into it! A friend gave me a Palm Universal Bluetooth Keyboard, and I used your driver to connect to my iPaq 110. Thanks again!
How do I create a COM port?
The Shift 1234567890 and .
Sorry for shamelessly bumping an old thread (well about a month)
These ([email protected]#$%^&*()>)
keys don't work for whatever reason. GREAT program by the way. I know my way around c, c#, etc so if you released the source, I might be able to get these to work.
Thanks!
Rob
idlacrosseplayer said:
Sorry for shamelessly bumping an old thread (well about a month)
These ([email protected]#$%^&*()>)
keys don't work for whatever reason. GREAT program by the way. I know my way around c, c#, etc so if you released the source, I might be able to get these to work.
Thanks!
Rob
Click to expand...
Click to collapse
Source code attached including ipaqkbmap which is a small application i used to determine the codes for the various keys... if you follow the source you'll know why this was necessary.
In my case i dont think it was necessary to map those special characters as the WM API managed some of the shift-state issues and did not require anything further....
Either way... free to play with it and see what comes out of it... Have fun
P525
Hi!
I have a ipaq foldable keyboard!
It the words are working but te funcion buttons doesn't.
I've installed the hp driver but when I want to enable in the program the keyboard :Couldn't open port COM1:.rc=55
Any ide?
How can I make an outgoing serial port (any port from COM1 through COM9)?
Thx
Asus P525 WM5
Thank you .. you are a star
I have a kaiser with wm6.1 and an HP ipaq (darfur 950) foldable keyboard .. heres what i did
- download IPAQKB.exe into storage card
- download HP update 2.0.0.8
- used activesync to update wm6.1 with update 2.0.0.8
- download .NET framework 3.5 compact from (http://www.microsoft.com/Downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en)
- open active sync and then run .NET application but make sure you chose 'custom' installation and put destination as :C\Mobile Device
- use bluetooth programme (start>settings>connections>bluetooth) to find foldable keyboard and tick serial port and also set COM 1 plus untick secure connection in the 'COM port section'
- run IPAQKB and select COM 1
- run foladable keyboard on in Programmes of wm6.1
- tick enalbe keyboard and thats it
p.s my code for keyboard was 0000
Here is the driver for WM6 WM5
Please follow the instruction for installation in the readme file.
Should run on any wm6.
test the hp ipaq bluetooth foldable keyboard with my htc diamond and working great.
Softkey Shortcuts
Does anyone know the shortcut or keyboard combination for Left and Right Softkeys with HP Foldable Bluetooth keyboard? Tq
Thank you so much for this small application. I have been able to pair HP BT keyboard with my HTC Touch HD and it seems to be working fine in Phatnotes. Will save me having to buy another keyboard.
Regards