Hi all can any one help please i wont to remove o2 ative from the extened rom, Can i do that with out loosing my GPRS , i just wont a simple interface when i need to do hard reset , Can any one give me a little advice please, Plus could i make a boot image so it can run from Sd card .
Sorry about this but is there any way of putting my Email conection direct in to the ext rom so if i do hard reset it still there.
PS thanks for your time
If you remove the link from the \windows\startup directory and simply do a soft reset then Active sync wont automatically start, but if you do wont to use it, the link will still be on your start menu.
I recommend using Sprite Backup
http://www.spritesoftware.com/products/sprite_backup.html
Related
pls help me with some of my questions
i just upgraded my xda2 mini with a qtek 1.11.00wwe rom then i restored my device after the upgrade.
now for the question: if i hard reset my device will i still have the o2 stuffs or qtek stuffs???
then, if i had qtek stuffs, will i be able to remove them and put the o2 apps back????
thanks for any reply
I dont think the qtek rom will install on the mini unless extract update file and perform a few modificatins, however once you have done the update the device will have the qtek apps, if you want to have th o2 customisation you will need to perform a hard reset with the o2 ROM and then do a soft reset just after you have done the screen alignment. Next in file explorer just go to the extended ROM and make a copy of these files on your SD / pc, and once the qtek update is installed you can then readd those customisation files from the extended rom
rgds
jim
thanks for the reply
damn, i have already done the upgrade. now i am left without a internet setting for my carrier.
who is your carrier? I am sure we could find a cab file for them.
rgds
jim
Hello there,
just wanted a fresh start with wm5 after recieving my 1gb minisd. because i didn't got the hardreset by pressing the buttons to work i used clean storage to hard reset, but afterwards it asks for calibration and timezone settings but doesn't install the cabs in the extrom. does someone know why and how i can fix this?
Ok, found out how hard reset by presing the buttons on the device works. But it's the same thing. Windows Mobile 5.0 setup starts (time zone and popup menu howto) but after this it says setup is completed and returns to the today screen.
But The cabs in the extended rom are stil there. I never touched them but copied the as backup to my pc. I#m able to manually install them when unlocking but they do not install by default. Why?
Can someone of the german XDA mini S users send me a copy of their original ext rom? I'm completly confused why my device ignores the complete cabs and autoexec from ext rom
hello there,
just inspected my extended rom a little further. There is no config.txt. I may have accidentially deleted this file.
Can someone who own a GERMAN O2 XDA mini S send me hiw original config.txt?
Thanks in Advance,
Maui
hi everyone! i m a newbie here.
after installing the newest rom by pug to improve the camera quality, i couldn't restore from any backup thru activesync 3.8
can anyone help?
thanks in advance
After a hard reset the partnership is deleted and you have to navigate to the relevant backup file. It's a bit of a mute point if you installed the camera fix as it will go back to how it was before.
If you didn't backup you contacts, try a restore, backup contacts using xbackup on your phone and do the upgrade again.
rom update
i end up re-installing the whole programs again as i couldn't do a restore from the activesync.
questions:
1) should i do a backup using xbackup since i tried to backup using active sync & when i did a hard reset, the same thing happens meaning that my pc cannot restore saying that the restore is meant for another equipment. ???
2) is there any cab files that can help that i miss out
3) i m quite fond of using the O2 connect since it gives me "fonix" voicedialling for free. i also use O2 plus beta. However i can edit the icons in the use menu. miss out another critical cab file again???
thanks pug for yr prompt answer...
I don't know what happend, but after I try to unlock and mount ext. rom, my device, keeps in the Orange startup screen for a while.
After that I must to do a hard reset, after the Install of programs (I supose from ext. rom) an error appears, saying The file: \extended_rom\autorun.exe does not exist. After that I need to do a soft reset to use my device. All seem to be ok, except some things about orange (I'm using it for voda, so dont care)
If I try to mount & unlock the extended rom after the hard reset My screen goes to the orange startup screen and hang it there...
I don't know what I must do know to try to access to the extended rom.
Even If I tray to restore a backup, my device hangs in the same point.
Please help me, If you can.
My device is an SPV M3100 (unlocked with pof method since 15 days).
Thank you in advance
I have the contents of the extended rom, of a previous day that I do a backup:
AutoRun.exe
AutoRun.exe.0C0A.mui
Config.txt
HERMES_SP_28_08_2006.CAB
MT_PC_Hermes_OrangeRO_REG_060612.CAB
MT_Shortcut-MMS-Hermes.CAB
T_mm1lib_DLL.CAB
But I can't put this files, because when I try to unlock the ext rom my SPV hangs, and I need to hard reset it
Each time that I try to unlock the ext rom my device needs to be hard reset.
I have a friend with another device like this.
can I extract the rom from this device and upload to my device?
Hi everybody , I have i-mate JASJAM with WM5 soon i'v upgraded to windows mobile diamond ,however I want to return to the old windows I mean the original one but I dont know how to do this , any help please??
Press Start -> Settings -> System -> Clear Storage, press enter to launch, you will be prompted to type "1234" and to press Enter. If you do this you will lose all contents and the Dash will be restored to its original configuration. It takes about 5 minutes for it do this and reboot.
hold down the two soft keys and power the device on. Or you can also hold both soft buttons while pushing the stylus into the reset hole.
Not if mamadoharoona has updated the rom... Doing what DhaMajoR said will reset the Hermes to default BUT it uses the OS installed as the default. So, if you have flashed a new OS on your device you need to flash the WM05 stock rom to get that back, and good luck finding it...
Cheers...
Thank you DhaMajor , Ultramag69 is right the OS system does'nt change after applying your steps ,thats make me want to ask ULTRAMAG69 how can i flash the WM05 rom? I tried the same steps i have done with WM black diamond ,and the os still the same.
If you have any advice please tell me
Thank you for your interest
You need to find the WM05 flash file, good luck with that as they are as hard to find as hen's teeth if you didn't keep a copy of your original WM05 rom.
Make sure you have Hard SPL V7 on your Hermes and then flash the new rom. I use the sd card method as it seems safer to me, my opinion, and is REALLY easy.
1. Format 2Gb or less sd card FAT32. Copy .nbh file of new rom to it and rename to hermimg.nbh .
2. Put sd card into Hermes and reset Hermes into bootloader.
3. If 1st two steps done right, follow the prompts. If not, just reset to get out of bootloader, fix up what needs fixing and try again.
Cheers...
Thank you
Thank you very much