I am not able to Flash the original O2 ROm to the SD card.
I have copied the file NK.NB1 using XDAtools to the SC card and did a soft reset.
It does not work. Can someone please help me and give me the exact steps to do the same.
I have WM2003 (tmobile) on the phone memory. Wallaby bootloader ver. 6.22.
Please help me.
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
It does not bring me to that screen on the bootloader after the reset.
It just says GSM OK.
please help...
Diki said:
I have WM2003 (tmobile) on the phone memory. Wallaby bootloader ver. 6.22.
Click to expand...
Click to collapse
6.22 doesn't recognize ROMs on SD cards ... you have to downgrade it to 5.15 ... and I doubt you can do it coz tmobile ROMs prevent USB flashing
Anyway, try this ... under \XDAtools\binaries directory run this command while your device is connected
pnewbootloader bootloader_5_15.nb0
I just tried and this is what the cmd window says:
D:\Program Files\XDAtools\binaries>pnewbootloader bootloader_5_15.nb0
ERROR: fopen(bootloader_5_15.nb0) - The system cannot find the file specified.
ERROR reading bootloader
Please help me...............please
Oops ... there is a missing "v"
The file name is bootloader_v5_15.nb0
Or just try bootloaderfix.bat
This will do the same... ;-)
Stefan
This is what I got now:
D:\Program Files\XDAtools\binaries>pnewbootloader bootloader_v5_15.nb0
'D:\Program' is not recognized as an internal or external command,
operable program or batch file.
ERROR: ITReadProcessMemory - Unspecified error
Unable to find flash info offset, cannot disable bootloader writeprotect
D:\Program Files\XDAtools\binaries>
I believe this is a DOS error as it can't read "Program Files" as a full name due to the space character.
Try running this command your self from the DOS command window
same error message. typed the whole command myself.
anything?? any answers???
:idea:
:shock:
might be a silly advice ... copy the 2 files to a different directory with a short name ... ex. C:\Test ... and make sure that the device is connected to ActiveSync and in sync
same problem
i cannot downgrade wallaby 5.17 to 5.15 same as diki... but in 5.17 i can use patch wallaby to flash rom to 2003 successful ly... but i still want to know how to downgrade wallaby....
somebody please tell me
my pc is win xp because win me didn't work for xdarit.......thx
sorry in bad english....
Huray. .. i find the way to downgrade wallby 5.17 to 5.15
may be it's can help u
fist please read this fixbootloader.zip is work for .........
This tool depends on specific memory locations for certain roms.
It does verify that it is talking to a known rom. It also does a very
minimalisitc check if the file presented to it resembles a bootloader.
I tested it with 3.16.52, 4.00.10 and 3.04.00 ( the very old ppc2003 rom ).
It should also work with 3.17.03, 3.19.01, 4.00.01 and 4.00.05.
unpack the archive, from the command prompt, in the 'build' directory
run 'pnewbootloader bl515.nb0'.
it should take about 10 seconds.
output should be something like this:
C:\fix\build>pnewbootloader.exe bl515.nb0
protection found at 8c0d62d8
result: 00000000 00000000
Bingo........u have wallaby 5.15 absolutely
This is my step but i flash from 4.00.11Eng Wallaby 5.17 to 3.17.03Eng cook from http://xda.weblink.net ( may this my method not work for u )
first i must go back to ppc 2002 with ver 3.17.03
1.i burn sd by patch wallyby 5.17 with xdarit ( ver 1.3 M ) check box in 1k
2.insert sd to xda
3.press power+soft reset
4.that show screen ................patch press action to continue
5.press contact button
6.that show new menu is restore from sd ( oh god how u can do that xda-development teams ........thx very much )
7.i burn rom 3.17.03 that cook from http://xda.weblink.net ( thank again ) make sure when u cook this rom u did't check box except only for 3.17.03 that have simunlock already and i download in Nk.zip ( sd method )
8.burn Nk.nb1 with xdarit ( ver 1.3 M ) check box in 3.5k
9.press action to restore
10.that confirm to abort or yes press yes
11.wait.........not over than 5 minutes
12.that show screen check sum ok ....succesfully ........ cold reboot
13.press hard reset button ( near earphone plug )
14.boot screen and u have ..... welcome ppc 2002 ... try next step that show on screen and sync with u pc by Guest
15.find bootloaderfix.zip in this forum u can download somewhere.......
16.copy and paste it to Harddisk and extract to bootloaderfix\
17.go to start menu in ur Pc.... i use winXp
18.choose run and type this cmd it will show ur Dos command
19.in Dos command may be will show C:\Documents and Settings\new> u must type this C:\cd\ to go to C:\>
20.type C:\cd bootloaderfix to go C:\ bootloaderfix>
21.type C:\bootloaderfix>cd build to go C:\bootloaderfix\build>
22.type C:\bootloaderfix\build>pnewbootloader.exe bl515.nb0
23.Enter it and if it's not wrong that show this screen
C:\bootloaderfix\build>pnewbootloader.exe bl515.nb0
protection found at 8c0d62d8
result: 00000000 00000000
24.Congratulation now u have Wallaby 5.15 already u can check by unpluck ur cradle and press soft reset+power to check
25.Now that's free times to Upgrade or Downgrade with no problem
26.in Wallaby 5.15 U must use Xdatool to burn rom in ur sd or mmc no need Xdarit anymore hehehehe ( very fast to write rom ..don't believe me? try with ur self )
27.finish........and up to u to upgrade in wm2003 or ppc2002 any version......... huray.......
May be this i write it's cannot help u so much .....but i trust may be it's useful for dump man like me to downgrade Wallaby since i try to read more than 400 topic in here....... : )
and if u cannot flash 3.17.03 in sd because ur Wallaby block it....try to make rom is Nk.exe file but it's very risk to up/downgrade
by activesync because i broke my xda to dead because my com is Hank......... spare ur UPS to protect accident like me...
and so very Sorry in Very Bad English because it's not my tongue language : )
try to do and reply to me in this forum or my email [email protected] Thx....xda-developers teams again ........
Hi I am New about it but I have an Idea probably i have download the radio_stack_upgrade form My-Xda O2 web site and also i have Cooked a nbf ROM file from http://lumpistefan.dyndns.org/ and i have replaced the nbf ROM file to C:\Program Files\PROGRAMME A\english and try to run the PROGRAMME A.exe to upgrade will i have a success on this think ?
D:\Program Files\XDAtools\binaries>pnewbootloader bootloader_v5_15.nb0
'D:\Program' is not recognized as an internal or external command,
operable program or batch file.
Click to expand...
Click to collapse
yeah it's a long file name issue
i think it needs to be d:\program^1 insted of d:\program files
if you make a dir command in the root of the consol it should display
all the names of the dirs in the root
and that should make it clear how the consol inpert the progra files dir name
Related
HI,
I'm trying to upgrade my sx56 to the new rom (ruuv1.11_cea.20.17wwe_aws.exe) but i got the follwing error :
---------------------------------------------
The rom Image is not compatable ....
your current device info is PW10A1
Rom ver. 3017
Language :english
your upgraded image info :
Model PW10b1
Rom: A.20
Language :English
------------------------------------------------
What should i do ??
I have sx56 updated with xda-developers rom v1.2
now my device info is :
Rom ver. : 3.17.03 Eng
Rom date: 05/15/03
radio ver.: A.20.10
Protocol : 324e4
balo, if I am correct... you can't use Siemens update since it's now modified to o2 rom. If you didn't make a SD backup, you can ask the forum for the original Siemens ROM.
I did exactly what you did... upp'ed my Siemens SX56 rom to T-Mo 4.0.16 and didn't backup to SD first (since I didn't own an SD card before).
Your best bet is to use the bootloader SD card upgrade method.
But if you don't have a PC SD card reader the below is your next
option.
You need to download and run AdaptROM.
AdaptROM can be found at:
http://xda-developers.com/adaptROM/
Place AdaptROM.exe in the C:/Programs Files/SX56 upgrade
utility folder.
Now go to DOS and run AdaptROM.exe from the C:/Programs Files/SX56 upgrade utility folder. Now try upgrading again by running the upgrade.exe from the C:/Programs Files/SX56 upgrade
utility folder.
HTH
Hi,
the update that i have is .exe ,i unzip it and do the adaptrom.exe thing ,but how can i convert it again to .exe ,i tried to run upgrade.exe and i have the following error :
------------------------
Cannot fined the Rom image to upgrade you Pocket Pc Phone.
------------------------
and please could any one tell me step by step or refer me to a link to do the sd card method (knowing that i have ruu.exe file)
Thanks
Confirming you didn't have a C:\Program Files\SX56 upgrade utility folder and thats why you unzipped the upgrade file?
If so thats strange because this folder should have been created the first time you ran the upgrade utility.
BTW the reason the upgrade.exe cannot fined the Rom image to upgrade you Pocket Pc Phone is because its not being ran from the C:\Program Files\SX56 upgrade utility folder.
Anyhow heres my step-by-step for the bootloader SD card method:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you’re going to use a .nbf file you’ll have to manually change the “Files of Type” to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You’ll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
BTW the above is based on using XDArit version 1.0 which can be download from the software section at:
http://www.yorch.net and a PCI USB 3-One Travel Flash reader P/N FPT-D bought at Fry's.
HTH
Thanks Qman ,you helped me alot ,I appreciate it
Thanks you
I intalled some new rom tonight. When I tryed to change the rom again using a kitchen with a EXE file I get error messages. The first error comes from the black DOS looking window that says
ERROR: GetDeviceData - An existing connection was forcibly closed by the remote host. error getting devicedata
After that prgramme a v1.09 comes up say to hit next. Once I go through the couple if next buttons I get a second error.
ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR
Cannot execute the remote communication program. Please make sure that the USB/Serial Cableis properly connected.
The cable is connected and activesync works normally. Please help.
Thanks
Garth
rom 4.01.16
rom date 2-4-04
radio version 6.12
protocal 324e4
T-mobile ROMs are known to prevent USB flashing ... you will have to use the SD card method with .nbf files
Could you link me to the directions on how to do it that way. I'm really new at this. Is the SD the sim card?
Thanks
Garth
It seems you are familiar with the kitchen and that's fine ... cook your new ROM as usual but select the ROM to be .nbf file.
Using the XDAtools you can copy this file to the SD card (Secur Disk card for expantion not the SIM and it should be 64 MB or higher) ... then goto the boot loader (soft reset while pressing power) ... it will ask you to perss action ... when flashing is done, press hard reset ... wait 60 sec then press hard rest again ... enjoy
Doing this you must have a sd card
First thing you have to do is Back up your pocket pc.
1. go to the kitchen
2. select items for your rom
3. cook rom in nbf format ( secont method )
4. download xdatools from xda-developers.com
5. backup your sdcard in on your pc b/c this will format your card.
6. unzip the rom you cooked
7. now using the next step will erase your pocket pc
8. press the power button and reset you phone with your stylus
9. now you will see a different scree in the bottom it will say bootloader version xx
10. you must have below 5.15 if not start the program in "fix broken bootloader" in xdatools menu on your pc.(you mmust have your pocket pc connected to activesync.
11. now put your sd card in your pda and run xdatools browse to the file you downloaded and unzipped.
12. now press copy.
13. you will see a progress bar.
14. when this completes again press the power button and reset using your stylus.
15. now press the action button.
16 . the screen will now say FLASHING .
17. when this completes you will see your new rom.
I have done the same thing 2 days back.
FLASHING IS DANGEROUS NO GUARANTEE.
Do I need to install the xdatool to the pocket pc? And then run it from the pocket pc or from my notebook? Do i put the nbf and unzip it in the SD card or on my notbook.
Thanks
Also under xdatool it has source and destination. Do I get the rom from souce sd card and then put it into programme a?
Thanks
you will run xdatools from your notebook with.
unzip in your hard drive.
chose source where you unzipped your nbf file.dont use deop down menu use the browse button (...)
chose destination from drop down menu as " XDA SD CARD SLOT"
Easy for XDA I, but XDA II how to update from SD.
xda2 flash guide
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
I'm with a similar problem... but i can't use active sync because the pc craches
Can i just copy the nbf fileto a sd card through a sd card writer? And do the all other stuff in the same way?
not you cant copy the nbf file to the sdcard it will not work you HAVE to use xdatools to get it there
Hi, I m 1 of the fools, who tried to make a upgrade for my t-online MDA from WIndows 2002 to 2003 - but until now using O2.
After the update the mda does not start anymore. It shows only the startup screen with this data: G32S54, R3.23.11, 4.01.19 - but only with the o2-SIM. Otherwise nothing.
Hope, I could get a little help..
Thanks a lot..
.zaeng
You need to download the rom you require from the kitchen in nbf format, you then need xdatools, using xdatools you then program an sd memory card of 64 meg or greater with the nbf file, place the memory card in xda, push reset with stylus while holding powr button. Push action buton when prompted. Make sure your xda is charged. You should end up with a working system.
One question, did you carry out a hard reset after flashing the rom? This is done by unscrewing the stylus and using the top half to push in the tiny hole on bottom left of your xda, push once, wait one minute, push once more.
Downgrade..
I´m very sorry (or silly..), but what or where is a kitchen?
I made a hardware reset. The only thing, that i could get, is the wallaby bootloader 5.22 with the announcement GSM OK.
a kitchen is where you make your own rom
http://lumpistefan.dyndns.org
Downgrade
Hi, fine - but could you hold my hand one more time...
I now have an MultiMediaCard with a file NK.nb1. I start the boot lader, it reports "GSM ok" - thats all. Must I initiate the MMC or do something else?
did you follow this guide ?
because you cant just copy the nbf file to the sd card
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
downgrade
Thanks. It works great. Good stuff you made.
The problem was, that the osImage Tool did not find the SDCard correctly, only after a programm restart. Now its working fine.
I will try to upgrade again, proofing wether 02 can work on an updated T-Mobile MDA I.
Thanx a lot.
MDA I UPgrade 2003 mit O2
Also: als Resümee:
Upgrade möglich, O2-Verbindung problemlos.
For interest:
Its no problem to Upgrade MDA I from T-Mobile to Windows CE 2003 - also if you want to use O2.
i Have been flashing all the while Ok . Last Flash T-Mobile 4.04 16
After that can't flash . It gives
Gives Error 011 : execute remote communication program error
ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host.
error getting connectiontype
My active sync ok
PLEASE HELP.Thanks
once a 4.x.x.x rom is flashed to a device, you may only flash it via sd method, and not Activesync/ProgrammA.
Bootloader 5.17 can't flash
Thanks
I got SD to flash
..& followed the steps
After pressing the contacts button, these are the options i get.
it says
FLASH TOOLS
============
CE ROM TO SD
BOOT TO SD
CE+ BOOT TO SD
GSM ROM TO SD
CE + GSM TO SD
I dont have the options that say...
Restore SD
About
Exit
If i press anything is says "CARD Key Invalid"
Please Help
Thanks
if it dont start to autoupdate then
1 the boot loader is not right
2 there is not a valid rom on the sd card
here is a guide
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
xda help!!!!!!!!!
have have flashed my xda with the developers-update but i need a german version. if i try to update with a germnman one, the software said no dilddatei found!should i do? please help me and sent a e-mail to [email protected] thx 4 help
Thanks
I did tried but fail ...
XDArit Can't write into Sd It's Say "fail to open device" . PC Can detect it
OSimagetools does the job but end up bootup menu (refer my message)
Is there any way downgrade or upgrade the bootloader ?
Thanks
http://wiki.xda-developers.com/images/startmenu.gif
try picking the fix broken bootloader ?
I think he is having the same problem I am having.
How can we replace or upgrade the bootloader itself?
Hi, I thought I had a Himalaya untill I realized I had a wallaby (I tried flashing Himalaya images which I am not sure worked - Stcuk in loader screen). Anyway, I am using himaupgradeut_noID.exe to put back the proper OEM images now (hope it works) but I cant seem to get any of the images for the Wallaby to want to upgrade?
Is there somehting I am missing about my device?
Thanks,
Ritmo2k
rom
http://lumpistefan.dyndns.org/
guide
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
and you will never get anywhere trying to put a rom from a different device on your wallaby device
Thanks for the help
When I build the rom at that page, nothing happens? It thinks for a while then stops? Any ideas?
Thanks!
OK, was able tog et an image of lumpi's page
But now when I run it, it says "ERROR: GetDeviceData - Unspecified error" in the dos window. This "Programme A" exe has never worked on my pda?
Any ideas?
I know you say to use the flash card, but I dont have an external writer?
Thanks,
Re: OK, was able tog et an image of lumpi's page
Ritmo2k said:
But now when I run it, it says "ERROR: GetDeviceData - Unspecified error" in the dos window. This "Programme A" exe has never worked on my pda?
Any ideas?
I know you say to use the flash card, but I dont have an external writer?
Click to expand...
Click to collapse
Then you have to stay at your current ROM. T-Mobile ROMs prohibit flashing via Exe-file, and you get the Error Message....
So only possibility is to flash via SD-Card. As much as i know, you can alos use the XDA itself as Card Reader. Give it a try with the XDA-Tools...
Stefan