Related
I've bought today a Qtek S200.
IPL/SPL: 2.09.0000
GSM: 2.07.20
OS: 2.9.7.28
The first I did was a Hard Reset to the Qtek S200 and then...
Because of the problems with some application and antivirus I did a complete format to my computer. I just installed WinXP PRO SP2, all the updates from Microsoft Update, .Net Framework 3, Outlook 2002 and ActiveSync 4.1 (both came in the CD from Qtek). (I have also disabled Windows Firewall).
Then I think, I've done all the steps right (I think):
1) I connected the USB cable to de PC
2) I tried to plug the USB cable to the Qtek S200 when te PPC was OFF and nothing happened. Then with the Qtek S200 ON (in today's screen) I plug the other side of the USB cable and ActiveSync does not recognize my S200.
I dunno what to do to make ActiveSync syncronize with my Qtek S200, could you please help me???? I've been trying to syncronize for more then 6 hours (doing all the stuff...)
THNX,
Annita
Try this:
remove your activesync (de-install the software)
reboot your pc
turn on your qtek without the usb cable attached
plugin your qtek on the usb cable.
Does you pc find the device ?? (ding dong sound)
yes ? good, your pc finds it.
take out the usb again
install activesync 4.2
http://www.microsoft.com/windowsmobile/activesync/activesync42.mspx
try again, and see if it works.
My PC does nothing when I connect the S200...
Annita
If the USB cable connection does not work, it is possible to update ROM via Bluetooth ActiveSync syncronization????
THNX,
Annita
Annita said:
If the USB cable connection does not work, it is possible to update ROM via Bluetooth ActiveSync syncronization????
THNX,
Annita
Click to expand...
Click to collapse
It might work, however I would first look into why you usb doesn't work
when you plugin the usb cable, do you see the phone charge ? (led ontop change to orange) you might have a bad cable or you pc has a problem with the usb port (have your tried another usb port ? or removing all usb devices and only using the phone cable ?)
Yes to all.
When I connect the USB cable, the Qtek begins to charge the battery, and the orange led flicks.
I have tried on my PC and on my Laptop and didn't work in any of both.
I have tried with only he USB phone cable and did not work either.
Anyone has tried to update ROM via Bluetooth???
THNX,
Annita
Annita, make sure you have DHCP turned on on your PC. The virtual USB NIC should come up as 169.254.2.2, I believe. I was never able to get it to work without using DHCP on the PC side.
What is the virtual USB NIC????
Annita
When you plug in the USB cable, the PC creates a "fake" network adapter for the PPC and adds that to your list of network connections.
Just make sure DHCP service is started. Right-click My Computer -> Manage -> Services and Applications -> Services -> DHCP Client.
OK, the service was and is ON.
The thing is that I can syncronize via Bluetooth, but not with the USB cable (and I have the original cable and another mini-USB cable).
Annita
Bluetooth Activesync Sycronization will not work b'coz while upgrading, the phone resets itself, N it powers on in the upgrade process therefore, bluetooth of the phone will not be available then.
So, I dont its possible 2upgrade via bluetooth Activesync.
OK, thnx.
Annita
anita and the usb
anita, go to start setting control pannel, go to phones and modems and see the modems are installed there. windows (sh***t) store all the garbadge possible. can be that it identfy usb device like usb modem and put it on com 1 not that active sync works auto on com1. so check connection settings on activesync. + which use port you use? fron pannel or the rear of the PC?
is that a laptop if yes what model.
i'll try to help as much as i can
xman
ok, i have the same problem as you do, or at least a similar. i cant get my sync to work...
active sync 4.2
active sync says "critical communication error, try restarting your device", the active sync troubleshoot tells me that i dont have a ip adress (the link to microsoft does not work), although i have a network connection that my pc created (169.254.2.2). the active sync even appears in green.
my firewall and the win firewall does not interfere with this. switching off the firewalls does not improve this at all.
does anyone know a solution to this? thanks
I'll try what xmanmaster says, but I'm not at home until sunday...
Thnx,
Annita
Did this problem ever get resolved? I have the same issues, tried a wizard and a hermes. Not detected as a usb device, the charging light comes on. Both phones work on another PC. I have tried uninstalling activesync and rebooting phone/PC in every order I can think of.
UPNP (Universal Plug 'n Play) service is required
Hi all,
please make sure that the UPNP service is running on the desktop.
It's required for device detection as well as synchronisation with the WCE device.
A quite detailed description of all potential problems with ActiveSync can be found at Chris De Herrera's website.
BR,
N.a.D.
I have the following problem with my HTC Touch HD. Since yesterday after i transfered 2 video files and a few pictures, when i connect it through USB, the computer doesn''t detect HTC anymore (nor syncing nor file transfer). Even the Bluetooth syncing does not work. I performed several soft and hard resets, and it seems it;s getting worse after every reset.
I bought the phone 2 weeks ago, after i sold my Apple iPhone 3G 8GB. As we speak, i kind of regret i did that...any advise for me ?
I forgot to mention: when i plug the uSB cable, the device goes recharging.
Have you tried booting your pc ?
Also try unchecking Settings/connections/Usb to Pc/ "enable faster data synchronization"
r
Andrew
What cable do you use? I had similar problems with non original (asus) usb cable.
greetings everybody..
1) i tried what you said several times, no result.
2) i get same results with the original and the other cables..
3) i noticed one thing . . . if i connect the device to a computer that i never conected before the device, it launches active sync....and Active Sync just wont interact with my device.
Did you try reinstalling ActiveSync on your PC?
yes i tried....same result. Do you think a change of ROM would solve that ?
Now, even a syncronisation using bluetooth is almost impossible, since i cant pair the computer and the device. Damn, it's like a virus or something.
stupid thought:
Do you think a change of ROM would solve that ?
Click to expand...
Click to collapse
Impossible since i cannot connect using USB. Sorry !
I too had problems with my PC not recognizing the HD. Found out that it was a problem with my firewall and anti-virus. I adjusted anti-virus settings to allow active sync to pass through and have had no problems after that.
HTC also recommends going to Start --> Settings --> Connection tab --> USB to PC and deselect the checkbox for "Enable faster data sync"
For device recharging when plugged in to USB : go to Start --> Settings --> System tab --> Power. here below the battery charge indicator, there is a checkbox. Read the message and check/uncheck as desired.
Hope this helps !!
i thought one potential source for my problem would be the antivirus, but i disabled firewall (eset at work and symantec end point protection at home) and no result what so ever.
I cand figure a way to sync the device even with the bluetooth since i cannot pair the device and the computer.
I am starting to regret i bought HTC...
Try click the Activesync icon on HD Program, there is a "Option" on the menu, click and see if you could delete all the old connect. If yes, re-establish the connection again to see.....good luck
Option menu item is disabled (i performed several hard resets)...(
Another thing i noticed. I unchecked the box (when connected to USB charge), so now when i plug the usb cable, it wont charge. But, if the device is in stand by (black screen), and i plug the usb cable, it wakes the device up. So, in my mind, i think it is something wrong with the OS, it still "feels" the USB cable, but cannot (for an unknown reason) take the necesary action.
For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so.
Is there any way to reinstall ActiveSync on my HTC device ?
daemonus said:
Option menu item is disabled. For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so. Is there any way to reinstall ActiveSync on my HTC device ?
Click to expand...
Click to collapse
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V
NLBeev said:
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V
Click to expand...
Click to collapse
Tonight i will try to install at home Windows VIsta (at work and at home right now i have XP). I cannot use my phone - no phone number in agenda and it's driving me mad. The phone rings and there are quite a few persons i dont want to talk with.. HEEEEEELP
nobody there to help me ?
If you did a hard reset, and you can connect in drive mode, but can not sync, then I am 99.9% sure that there is nothing wrong with your phone, but that your computer is messed up.
Uninstall all your antiviruses, firewalls, and other bloatware, and see if it works then.
Just a possible solution, but did you try plugging in your phone into other USB slots on your PC? Are you perhaps trying to sync it through an USB extension cord, or maybe USB hub? I had problems with my PC recognizing the THD if I tried syncing that way. Best results were plugging it directly into the back side of the casing.
The reason I'm asking this is that if you have too many USB devices plugged in, it's possible that the USB voltage drops too low and devices won't connect to the computer.
I tried on 5 different computers, all available USB ports.
On a new computer, sometimes on the device screen it shows up Active Sync but that is all, no sync occurs. If i try again on that computer, i get the same result as i get using the computer at home or work.
The device cannot conect as a Disk Drive
Is there a way to reinstall Active Sync on HTC ? My guess is that this software is all gone with the wind (even i performed a hard reset). The big question is what the hell happened ? Could be a ROM fault ? I mention i never tried to change ROM, the only software i installed was S2U2 and Core Player.
If by monday it wont work, then i'll send it into service (i have warranty). But i hate service
all out of ideas...
Any ideas ?
Which items are checked when you go to Settings/connections/Usb to Pc/ on youre phone?
Have you tried to use another memory card (because youre problems started with copying)?
hi had my touch hd for ages now, and it connected to my pc with no problems, now all of a sudden its stopped working it charges but doesnt let me transfer files to it, i tried reset hard and soft
please help
go into connection setting- usb to pc setting and under the 1st option Activesync, UNTICK Enable faster data sync...
it worked for me
why don't you try to connect to your PC via Bluetooth? When that is working, chek another USB cable to see whether your cable is faulty. Might be a cause because it suddenly stopped working. Good luck
Dan - are you trying to connect with ActiveSync, or as a USB storage device?
Neelesh35 said:
go into connection setting- usb to pc setting and under the 1st option Activesync, UNTICK Enable faster data sync...
it worked for me
Click to expand...
Click to collapse
i tried that , but it didnt work
kuzibri said:
why don't you try to connect to your PC via Bluetooth? When that is working, chek another USB cable to see whether your cable is faulty. Might be a cause because it suddenly stopped working. Good luck
Click to expand...
Click to collapse
my laptop hasnt got bluetooth, its not the cable as ive tried 2 cables, they charge but my htc doesnt gimmie a choice to active sync, or mass storage or internet
johncmolyneux said:
Dan - are you trying to connect with ActiveSync, or as a USB storage device?
Click to expand...
Click to collapse
both it doesnt give me the option when i plug in htc to my pc, it used to be fine but now doesnt work
the same thing happen with me , i did every thing
change cable
check for usb port
.....etc
i can connect through bluetooth but it didn't sync
when i boot i have serial not USB in the screen with color
plz help me
Assiri said:
the same thing happen with me , i did every thing
change cable
check for usb port
.....etc
i can connect through bluetooth but it didn't sync
when i boot i have serial not USB in the screen with color
plz help me
Click to expand...
Click to collapse
Have you updated the usb drivers - http://forum.xda-developers.com/showthread.php?t=524619?
ClydeB1 said:
Have you updated the usb drivers - http://forum.xda-developers.com/showthread.php?t=524619?
Click to expand...
Click to collapse
i can't because in bootloader in the bottom of screen i have SERIAL not USB
can anyone help?
danjohnson19855 said:
can anyone help?
Click to expand...
Click to collapse
I hope it's not this
but it's possible to break the data connection (wires ?)
but not the rest of a usb socket
I did it to an mp3 player
all I could do is charge it
if the connections are ok and it does't ask (active sync/disk/connection sharing)
you might have ticked the box that says don't ask
that can be set back again can't remember how
but there is a thread on it somewhere on xda
found it
start -> settings -> usb to pc ->
I do have exactly the same problem....tried EVERYTHING....no success....surfing the net saw many are experiencing the same problem...
garyjmobey said:
I hope it's not this
but it's possible to break the data connection (wires ?)
but not the rest of a usb socket
I did it to an mp3 player
all I could do is charge it
if the connections are ok and it does't ask (active sync/disk/connection sharing)
you might have ticked the box that says don't ask
that can be set back again can't remember how
but there is a thread on it somewhere on xda
found it
start -> settings -> usb to pc ->
Click to expand...
Click to collapse
thanks for help i unticked the box , but still doesnt work , is there anyway to chance roms without a usb connection
You can flash from SD card. I have same problem with TyTN II, charging when turned off, no usb connection.
igord said:
You can flash from SD card. I have same problem with TyTN II, charging when turned off, no usb connection.
Click to expand...
Click to collapse
how do u flash from card?
hello everyone !
i was looking for thread about my problem, i saw some similar problems, solved but not working for me..
i was connected to my PC through USB cable, transfering data few times, about 5 times, than i tried to connect to transfer some more data and nothing, on my tattoo there is just sign of charging and nothing else, no asking for type of connection, there is sound on my PC (connected something through USB ) and nothing else.. i tried to manually set for storage device, put to ask me each time when i connect via USB and still nothing.. also, tried USB DEBUGGING, it says that htc is connected to PC but PC is like dead..
i'm on windows 7 if that means something, thank you for you help
pls anything ?? i have pics to transfer to PC and mp3 for tattoo but i just can't solve this out :S
I had the same problem when I just got my first android. My first guess is - you accidentally killed PC Synchronization process on your phone. Reboot should help (at least it did for me).
I had the same problem and solved it!
put pc sync into taskiller ignore list...
how can you explain me please?
goran95 said:
how can you explain me please?
Click to expand...
Click to collapse
hi
also still have this problem the sync does not happen automatically so what i do is after connecting my phone via USB i go to the USB to pc on my Phone and click on the HTC sync and then the sync happens and i can do any kinda data sync needed try doing it it work for me
USB Debugging also has to be cheked OK
i also have a Wmo Jade this does not happen it sync imm but on the tattoo it always happens and i need to do the above to get the sync working
hi
i have touch2 t3333, when i connect it to any pc , it doesn't recognise the phone, it charges ok but wont let me do disk drive or active sync
the phone is unlocked and was on the T mobile network and has that branding
has any one any ideas
thanks in advance
Dave
What operating system are you running on the PCs you are trying to connect to? If it is pre-Vista then you will need active sync running. If it is Vista or 7 it should recognize the phone as a mobile device. Try a soft reset while connected. I've had to do this with one of the pdas I've had. Also if you are connecting to a usb hub it might tell you it is charging but might not actually be connected. Try connecting to a usb port on the pc or another usb port if it has two.
HI!
Look at:http://forum.xda-developers.com/showthread.php?p=6912114#post6912114
Thanks guys will have a go now