MMS Composer 1.6.0.9 problems - MDA II, XDA II, 2060 General

I have problems with this version.
when I make a new mms and press send.
I can fill in a new phone numbers.
I press the button so I can search for a contact.
I tick a contact and press ok.
The contacts are only show as: 316xxxxxxxx instead of +316xxxxxxxx
So the MMS Composer removes the country prefix +
Anyone experiencing these problems?
Thanks
Panja

I had a LONG argument with someone on here about this once Panja mate, but to the best of my knowledge, EVERYONE experiences this, but the messages, at least for most, seem to work ok, as if the phone actually REALLY uses the number with the + included.
Aside from it taking the + sign out, are the messages working and getting sent ok though???

thanks for the reply m8.
Thats the problems.
The messages are NOT sent without the +....
When I pick a contact and press ok the number appears without the +.
Only when I put a + infront it works... without it it stays in my outbox....
I'm going to install version 1.6.0.12 soon.
Thats the one included in the Dutch Orange m1000 rom...
That version dont seem to have the problem...
Will let you know when its installed.
Cheers
P.

I installed version 1.6.0.12. now and still got the problems...
When I add an contact it adds the number without the prefix +
And the message can NOT be send...
Only if I put an + infront...
Am I the only one experiencing these problems?

Panja, so far you have stated v.9 and v.12 have this + sign problem for you, yes?
Can you confirm that's the case, and also therefore, can u check to see that v.8 does NOT have this problem, as for me, v.8 still stripped out the + sign but my messages worked fine.
Just as v.9 and v.12 did - stripped out the + but sent fine anyway...
Let us know mate,
Cheers.

Hey!
Yes I used version 09 & 12 on a Qtek 2020 rom (1.66WWE) and the + was stripped.
The message was NOT sent this way...

Related

International phone number bug in MMS as well as SMS?

I have an original ROM O2 (UK) XDA2. Last night, for the first time, I tried the poxy MMS thing. Someone sent me one which worked fine (eventually) and his number came through in the international format, i.e. +447123456789. I clicked reply and sent him a video back. It didn't arrive. (But I bet I still got charged for it :roll: )
When I clicked to reply to the incoming MMS, the number that was in the 'To:' box was 447123456789, in international format, but without the +, similar to what happens when selecting contacts for the SMS 'To:' field. So, I did some experimentation.
I discovered that MMS don't get sent if the phone number doesn't have the leading zero (for the UK market). International-number formats don't work, even if the number has the + at the beginning. So, if someone sends you an MMS and their number comes through in international format, you can't simply reply to it without editing the number to UK format.
Does anyone know whether any work has been done on this issue for the new official ROM update? Either to rework the number so it's correct to the international format, or to allow incorrect numbers to get through the system to the recipient even if it's in international format but without the +?
As far as I recall, numbers sent to sms recipients, keep the + bit in them (this is under the NEW ROM - for the older ROM you have to enter the plus yourself, depending on how you searched and entered the contact).
But for MMS, the + sign seems to be truncated when sending a message (again, this is under the new rom, but I recall this is the case from the older rom too???).
Nevertheless, the message still gets sent with it truncated though.
So if it was still in your Outbox, then the number format is NOT the problem, but a network one instead.
This is confirmable by the fact that if the + sign WAS the problem, the message would STILL have attempted to send, but you would have then got an error message instead.
This strongly leads me to believe that your problem, is a Network or GPRS one.
Certainly NOT a number format issue.
If the numbers are not of the right format, the symptom would manifest itself in the message trying to send, then an error message being shown.
Not what you have.
i did have this problem when replying or selecting a number from contacts to send a message too, it always don't include + sign even if its included in the contacts, the only 2 work arounds i found to solve this problem is either add 00 instead of + for me it was a night mare since all my numbers are stored in international format even local ones for raoming needs so the other option to avoid it is the type the name in the TO field & an auto continue will show you a list of contacts with the matching letters then choose it from their, only then it will send it correctly even it it has +, i think its an RSU issue or maybe Rom country selection issue because i noticed when it fails to send a message it reputs the contry code like the following +44207 wil be something like 44244207 & no matter where i searched to find where the hell it brings this original country code i couldn't find it
Rabia.
The + sign being omitted is a known bug on earlier ROM versions.
The latest ROM fixes this.
But this doesn't have any bearing on the OP's problem, in that for MMS, the software seems to drop the + in the address field anyway, but still manages to get through fine.
And if the problem WAS one of the number format, this would be shown in the form of an error message saying the message could not be delivered.
As the OP is not getting this, and the message seems to be just sitting in his Outbox, I suspect a completely different problem perhaps.
i have worked with operators because of my business nature & from my understanding also that someoperators will recognize the international codes without even 00 or + & some will not so here you go i got multiple problems to contibute in this :shock:
Shadamehr said:
As the OP is not getting this, and the message seems to be just sitting in his Outbox, I suspect a completely different problem perhaps.
Click to expand...
Click to collapse
No no, perhaps I didn't explain properly. As far as the XDA2 is concerned, the message has gone, but it never arrives at the destination. So the network is losing the MMS because it's not properly addressed, but it's only incorrectly addressed because of the MMS software on the XDA2.
Hope that clarifies it.
It would have done mate, were it not for the fact that as far as SMS at least are concerned, if you send a text to a number that is not valid, or incorrectly formed or laid out, you get an error message to tell you, and you say you are not getting an error message.
So let me test this with MMS and get back to you. If it generates an error message, then it shows it is not a number issue.
Er I CAN'T test it as such mate...
Becuase just as I thought, and mentioned in my posts, when I go into the contacts list to choose a recipient for an MMS, they ALL have the + sign removed from them.
My own number shows (changed slightly of course) as:
447866123456;
In the "To Phone" field.
But if I send, it gets through fine. As it does with other numbers.
Which was exactly my point - that with the MMS Software (and this does NOT apply to the SMS application, which is very different), the numbers always have the + sign stripped out of them, but they still send.
So if your numbers appear as 447899123456 etc then if you are in the UK there is no reason why they should not get sent, as I already said based on number format, as this is exactly what happens anyway.
The only thing I can then offer, if you are in the UK, is that you check your regional settings etc on the xda.
Failing that, then maybe its time for that ROM upgrade?
Strange one.
I figured it was a network problem, but wondered whether the source of the problem (i.e. the fact that the MMS Composer application screws up the number for me) had been fixed in the ROM update.
MMS msgs which don't have the + in front of the international code don't get through for me, and I can't send them with the + in front because the MMS Composer app strips it off, even when I add it manually to the number to which I'm replying. So all numbers must be of the national format, i.e. 07123456789 and I can't send MMS abroad.
So, has this 'bug' been fixed in the new ROM update?
sublimatica said:
I figured it was a network problem, but wondered whether the source of the problem (i.e. the fact that the MMS Composer application screws up the number for me) had been fixed in the ROM update.
MMS msgs which don't have the + in front of the international code don't get through for me, and I can't send them with the + in front because the MMS Composer app strips it off, even when I add it manually to the number to which I'm replying. So all numbers must be of the national format, i.e. 07123456789 and I can't send MMS abroad.
So, has this 'bug' been fixed in the new ROM update?
Click to expand...
Click to collapse
NO mate - because as I indicated, it is NOT a bug.
Whilst the MMS Software strips the + sign on the display, it must still SEND to the number with the + in, becuase all of mine get through, whereas, an SMS without the plus, as seen by the bug in SMS software that IS fixed in the new ROM, does NOT get through.
Let me make it clear, as I have obviously not in my last three posts...
There MUST be something else giving you trouble.
Becuase for me, saying it for the third time, with the + sign not shown, it STILL works. And I am in the UK just like you.
Shadamehr said:
...as I indicated, it is NOT a bug.
Click to expand...
Click to collapse
Please put your arrogance to one side for a moment, and stop SHOUTING certain words at me. There is a bug. The MMS software removes the + from the number for international-format numbers, even if I type it in manually to the number before sending. This is a bug. OK? :roll:
Shadamehr said:
Whilst the MMS Software strips the + sign on the display, it must still SEND to the number with the + in, becuase all of mine get through, whereas, an SMS without the plus, as seen by the bug in SMS software that IS fixed in the new ROM, does NOT get through.
Let me make it clear, as I have obviously not in my last three posts...
There MUST be something else giving you trouble.
Click to expand...
Click to collapse
I don't care about this. My testing has revealed one simple fact, as I keep trying to explain: when the phone number is in UK-format, with a leading zero, my MMS get through. When it's in a broken international number format, they don't. I want the software to send them with a correct international-format number so that they work. Thus, my question is: has the bug in the MMS Composer software which strips the + from international numbers been fixed with the new ROM update? (If you read above, you'll notice that this was the question I first asked... :roll: )
Shadamehr said:
Becuase for me, saying it for the third time, with the + sign not shown, it STILL works. And I am in the UK just like you.
Click to expand...
Click to collapse
Yes, but according to your profile, you're with Orange. I'm with O2, and they don't work. No error messages, no failure reports, nothing. Just silence. Can you please just believe me, or do you want to come to my house and I'll demonstrate to you?
I appreciate your attempts to help, but if I had wanted someone to treat me like an idiot I'd have asked for that. OK?
sublimatica said:
Shadamehr said:
...as I indicated, it is NOT a bug.
Click to expand...
Click to collapse
Please put your arrogance to one side for a moment, and stop SHOUTING certain words at me. There is a bug. The MMS software removes the + from the number for international-format numbers, even if I type it in manually to the number before sending. This is a bug. OK? :roll:
Click to expand...
Click to collapse
I'm SHOUTING cos you keep missing it. And now for the FOURTH time - it is NOT a BUG per se - got that - I'll say it again - NOT a bug per se, because having looked on a friend's XDA2, it does this for ALL, and yet works on his too. I'm sorry for shouting. If you LISTEN however, I can refrain from shouting. Let me be absolutely utterly and abundantly clear - I have no doubt you have a clear issue. What I am SHOUTING, and yet you keep ignoring, is that I am trying to tell you that the MMS Composer stripping the + sign out, is NOT the answer to your problems alone. Can I make that any clearer?
Shadamehr said:
Whilst the MMS Software strips the + sign on the display, it must still SEND to the number with the + in, becuase all of mine get through, whereas, an SMS without the plus, as seen by the bug in SMS software that IS fixed in the new ROM, does NOT get through.
Let me make it clear, as I have obviously not in my last three posts...
There MUST be something else giving you trouble.
Click to expand...
Click to collapse
sublimatica said:
I don't care about this. My testing has revealed one simple fact, as I keep trying to explain: when the phone number is in UK-format, with a leading zero, my MMS get through. When it's in a broken international number format, they don't. I want the software to send them with a correct international-format number so that they work. Thus, my question is: has the bug in the MMS Composer software which strips the + from international numbers been fixed with the new ROM update? (If you read above, you'll notice that this was the question I first asked... :roll: )
Click to expand...
Click to collapse
I DID notice it first time. You just didn't seem to see my answer for the THIRD time. Let me go one bette for you, I cannot answer the question as you phrase it, because, as I have said, it is NOT NOT NOT NOT NOT a bug, so how can I say if a bug has been fixed, if it is not a bug? Moreover, never mind the ROM update, I have downloaded and installed version 1.6.0.9 of the Arcsoft MMS software, and this is still there BY DESIGN - the ROM Update version is only to 1.6.0.8 - so TWO version updates do not alter this behaviour - which I would have expected if this was a bug.
(And as an aside, if you want me to send you a copy of the latest version, even newer that the ROM Update one, I happily will)
Shadamehr said:
Becuase for me, saying it for the third time, with the + sign not shown, it STILL works. And I am in the UK just like you.
Click to expand...
Click to collapse
sublimatica said:
Yes, but according to your profile, you're with Orange. I'm with O2, and they don't work. No error messages, no failure reports, nothing. Just silence. Can you please just believe me, or do you want to come to my house and I'll demonstrate to you?
Click to expand...
Click to collapse
I have an O2 SIM too, or in between your attempts to keep correcting me, did you not think I would try it? And as I also indicated, my mate has an O2 XDA2, and his works too. Not sure his ROM version though.
sublimatica said:
I appreciate your attempts to help, but if I had wanted someone to treat me like an idiot I'd have asked for that. OK?
Click to expand...
Click to collapse
When people keep constantly ignoring what people are pointing out to them, and better yet, even criticising them for SHOUTING becuase they are still being ignored, I COULD offer that tis is indeed exactly what you have asked for.
But in actual fact, i am very keen to try and help you, so I won't stoop down.
Once again, not knowing if you have already checked or not, can I suggest you check your regional settings.
Also, something else I noticed, is that using Outlook 2003, if I enter a number on the phone, the way I used to do it was like:
+44 191 460 1234 (for landline numbers with the gaps in just as you see them)
And +44 7899 123 456 for mobile numbers, again with the gaps just as you see them.
This nevertheless, still worked fine for SMS, and MMS.
Now that my trial of Outlook 2003 has ended, and I have re-installed Outlook XP, the earlier version, I now find, no matter what I do, that if I enter a number in the manner I prefer as above, onto the phone, when it syncs with Outlook, they appear as 44 (191) 460 1234 or 44 7899 123 456 in Outlook, and the same when sync'ed back to the phone, yet they still work.
Let me be absolutely clear however, the single only purpose for my post, which, in effect I am now saying for the fifth time, is that to the very best of my knowledge, and despite what you repeatedly think, and as backed up by testing with my O2 sim, and on a friend's phone, that as far as ArcSoft MMS composer is concerned, the appearance of numbers in the program's contacts list with the leading + stripped, whilst looking problematic, is actually NOT a bug, and for the rest of us, seems to work fine regardless.
I say nothing more than that.
Forget it. Can't even be bothered to read all that arrogance.
Do these forums have an ignore function?
Right then. Let me summarise, if only to give you an opportunity to shout at me again (even though I've been listening carefully all the way through this painful process). (I hope you're not a teacher.)
When I create an MMS using a number in the international format with a + at the beginning, the MMS Composer helpfully removes the + from the front of the number when I click to send it.
This 'special behaviour' of MMS Composer in stripping out the + symbol is not a bug. I'm not sure what one should call this, but you are absolutely clear that it's not a bug. It must be by design, huh? (Why would they design it this way, I wonder?)
Anyway, MMS messages sent by me in this way don't arrive at the destination. I get no error messages. As far as my machine is concerned, they have gone.
When you do the same thing, your messages get through.
You can't tell me why, or offer any useful suggestions for circumventing this problem. You can only keep repeating that I don't have a problem, this is a network feature, and that you're bored of telling me this.
Well thanks for your contributions.
Can anyone else help me with something useful?
(Shadamehr - keep quiet here. I don't need any more input from you right now.)
sublimatica said:
Right then. Let me summarise, if only to give you an opportunity to shout at me again (even though I've been listening carefully all the way through this painful process). (I hope you're not a teacher.)
Click to expand...
Click to collapse
You may have been listening - it's hellish clear you haven't been taking it in though.
sublimatica said:
When I create an MMS using a number in the international format with a + at the beginning, the MMS Composer helpfully removes the + from the front of the number when I click to send it.
Click to expand...
Click to collapse
Yes
sublimatica said:
This 'special behaviour' of MMS Composer in stripping out the + symbol is not a bug. I'm not sure what one should call this, but you are absolutely clear that it's not a bug. It must be by design, huh? (Why would they design it this way, I wonder?)
Click to expand...
Click to collapse
No idea, and I fully concur its daft - never once argued with you there.
sublimatica said:
Anyway, MMS messages sent by me in this way don't arrive at the destination. I get no error messages. As far as my machine is concerned, they have gone.
When you do the same thing, your messages get through.
Click to expand...
Click to collapse
Yes - exactly so.
sublimatica said:
You can't tell me why, or offer any useful suggestions for circumventing this problem. You can only keep repeating that I don't have a problem, this is a network feature, and that you're bored of telling me this.
Click to expand...
Click to collapse
Completely untrue you arrogant idiot - if nothing else I have indicated regional settings on the xda2 as one area to investigate, and written at length about the strange behaviour different from Outlook 2002/XP to Outlook 2003 - your arrogance and sheer falsitudes seem to know no bounds. It might not have been much, but it was a clear attempt to try to help. For Christ's sake, you'd think I was getting PAID for trying to help you, and not giving up of my time and effort for free to seek to help a fellow user.
Like I said, you arrogant swine - are you for real? And where the hell did I say you don't have a problem? You have an absolutely genuine one. All I ever said was that the MMS software stripping the + out is not the be all and end all cause of your problems. A fact which still holds true, and in its very own right is a VERY helpful piece of advice or information for you.
I am trying to tell you that what you see happen in terms of the MMS software stripping out the + sign is a situation that seems inherint for all UK users, and yet doesn't stop other people sending.
How the hell can you overlook that key fact, and tell me it's not an important piece of information for you or again overlook the fact that I am TRYING to help you?
On the contrary, I mentioned this way back in my first attempt to help you, but you completely overlooked it, and now have dug a fairly large hole for yourself, now that this fact is starting to sink in with you.
But instead of letting me take the shovel off you, and instead give you a (freely profered) helping hand out of the hole, you can do nothing but attack me, for trying to help you, and dig that hole much deeper for yourself.
I have done nothing but try and help, came out with a key piece of information, and came back time and time again to try and help more, and all you can do is treat me like cr*p. ? ? ? ! ! !
Well bonny lad, frankly, you are the biggest t*sser I have had the misfortune to come across, and if you think I'll hang around here for you to attack me more when I repeatedly give up my time to try and HELP you, you really do have another thing coming.
You can well and truly go to hell mate.
You sad sad soul
sublimatica said:
Well thanks for your contributions.
Can anyone else help me with something useful?
(Shadamehr - keep quiet here. I don't need any more input from you right now.)
Click to expand...
Click to collapse
Who the hell do you thnk you are to tell me that?
My advice to any would be helper to you now would be:
"Don't bother - you'll make time and effort to try and help him, and he'll treat you like a piece of cr*p for your reward"
Honestly - what colour is the sky on the planet where you live?
Get a life, and then look back at this event in embarresment. You should hang your head in shame.
:lol: :lol: :lol: Like I said, I didn't actually need any more input from you, Shademehr, but thanks for the laugh anyway.
Sensible suggestions from knowledgeable users on ways to solve my MMS problems (as opposed to just telling me the problem is unique and vaguely waving me in the direction of regional settings :roll: ) are still welcome - thanks in advance.
sublimatica said:
:lol: :lol: :lol: Like I said, I didn't actually need any more input from you, Shademehr, but thanks for the laugh anyway.
Sensible suggestions from knowledgeable users on ways to solve my MMS problems (as opposed to just telling me the problem is unique and vaguely waving me in the direction of regional settings :roll: ) are still welcome - thanks in advance.
Click to expand...
Click to collapse
You utterly arrogant moronic b*stard.
I've spent god only knows how long trying to help you, and offering to send you updated versions of the software to try out and see if that helps, and all you can do is take the p*ss and find it funny and say what a LAUGH it has been for you?
And then ask if ANYONE ELSE wants to try and help you too?
You think they want the p*ss taken out of them once they have spent ages trying to help you too?
Your not of this planet sunshine.
Thanks for the message saying "thanks for all the time you spent trying to help me shadamehr".
As if.
You f*cking d*ckhead - what an ungrateful arrogant b*stard.
Good luck. You're gonna need it.
mms problems
i am frightened to say this now, but..... i appear to have the same problem, the msg appears to leave me ok, it just never arrives. i havent managed to send any mms for the past month - 6 weeks since i changed from Nokia 6600 to XDA II.
Please don't be frightened, David - I'm not that bad, honest! :lol:
I discovered while testing again the other day that SMS messages don't get through for me either unless the number is perfectly correct (i.e. with the + included if in international format), so what I'm experiencing isn't limited to MMS. I guess it must be a network limitation.
I'm sure that other people reported that SMS do get through without the + attached when this bug first came to light last year. At least with SMS I get a warning that the message couldn't be sent.
I rarely close threads, but this one is closed.
I'm very busy this weekend, and have no time to read this whole thread to see who did what to whom.
Past experience has shown that text-based forums are not a good place to express feelings of anger and frustration. Please all realise that no matter how well we're doing presently, a community such as this is always more brittle and fragile than you'd expect.
Love, Peace & Happyness,
Peter
( dig it! dig it! )

A really nasty bug !!

Outgoing mails looses contet !
Semms that the mail is been cut of after 2-3 lines of basic text, written in the mail.
All other is fine, atachments and so on is working.
The really odd thing, the mail goes into the sendt box, and there is everything just fine, so there are no means to control what was sendt.
Using the imate JasJar to write a e-mail from a pop3 acount.
Using GPRS/UMTS for connection.
Any clues ??
Kim
Noone seen this?...
Hmm I cannot see any good reason for this either..
grrrrrrrrrrr
Hi!
I also have this!
I just want to add that it does not happen all the time.
But the mails I send that get cut, get cut at the same place each time.
I have verified this by sending to my home PC the same mails that my collegues report having missing content.
This has got to be fixed.
Frode
Ahh
Maybe we do things different in Norway ?
The use of "sym" caracters maybe ?
I'll have a look at the mails again...
Kim
Did you find anything...?
Frode
I tried to send email with 20 lines of text using 'SYM' chars, with my Qtek 9000, without any problem :wink:
To POP3 accounts, because in GMAIL, chars like "èüàä" are badly translated.... but no lines lost :?:
Honestly, I have not had time yet to have a look @ this, but it is def. weird
...
I have had this problem using my yahoo account to send mails. It seems to get cut after 2-3 lines yet in the sent folder it looks like it has sent it properly....
please help this is driving me crazy...
my emails didnt have any sym characters so I doubt the problem has to do with that.
This is not just a nasty bug!
This degenerates the universal into being nothing but a toy!
I have had several "semi-important" business emails being sent with only the "greetings" section intact!
If I cannot find a fix, I will not be able to use the device for emails, and as a combined phone/PDA, this would be quite stupid......
As it is now, I always have to send an SMS or make a call a while after sending a reply via email to check if the reciever got my whole message, or just three lines......
Bullocks!
Frode
Weird, mate.. what kind of ROM are do you use :?:
I just tried to send a 50k email by UMTS, no problem with a Qtek 9000..
Could it be an upload limitation :?:
How do I know which ROM I have?
Thanks,
Frode
Ooopss, good question..
With Start -> Settings -> System -> Device information, you can know the version..
I know I've a Qtek ROM because it appears on the screen when I do a reset.... but I think it's possible to change these images in a ROM.. not 100% sure about that..
Maybe someone else can reply :?:
Im using a standard M5000 with the following ROM:
ROM: 1.13.49 WWE
Radio: 1.03.00
I will try and do some more tests today to see whether it was just a one off problem or consistent...
i will also try sending mails with another pop3 account to see whether it has something to do with the account.
I still cannot find any good reasons for this, I would assume this would be high on a priority list @ MS !
Hi!
I whant to report another annoying bug, which makes it impossible to rely on my Qtek9000 with important mails.
:evil:
If I compose the new mail in RUSSIAN, and scheldule it to be sent via MS Outlook on the next sync, this mail is sent as "????" signs.
English mails goes Ok.
Any suggestions how to fix it?
Have anybody face with the bug in different languages?
Is the WM5 fully unicode?
Thank you in advice.
i have the I-mate Jasjar and i use it all the time for emails since i do 90% of my work outside on the go. i never faced any issues sending emails through GPRS, no matter how big was it or what attachment do i put.
this is the rom i have:
rom: 1.13.53 WWE
radio: 1.03.01
extrom: 1.13.179WWE
i also checked with other people having the same device if they have this kind of problem, no one ever faced it, they all have the same rom as mine, or the arabic enabled rom for the Jasjar, which is the original rom shipped with the device.
it might be a rom issue as it's mentioned.

AIM for the 8525

i currently have the UK version of aim on my fone and its a hassle to have to login by sending a message and even more annoyin to press the send button instead of enter. ive tried other free versions of Aim such as IM+ and didnt like them except Agilemessenger which was good but last only a week. I saw a link to this site that mods the uk version to work by pressing enter but idk how to install it? it just downloads the file and i dont know wat to do with it? can ne1 help me or give me sum other options for free aim messengers that work on the 8525?
here is the link to the file i downloaded.
http://forum.xda-developers.com/attachment.php?attachmentid=29210&d=1153123292
thx in advance
I've attached is a modified version of the AIM I use that I snagged off a Treo site back when i had my 700w. Basically, it takes the File Menu that's usually on the bottom, and flips it to the top. It works AWESOME
To press enter to send a message, go into the Preferences and uncheck where it says 'Enter key sends return' or something along those lines.
Other people had problems with AIM staying open.. while using this version of aim and X-Button from HTC (task manager) and my connection 'Always On' in HTCustom AIM runs forever, unless you lose service, in which you have to re-sign on. The sounds and everything work great while it's running in the background, even with the phone off it works. I haven't noticed a big change in battery life either.
Only if there were some type of today plugin for this..
If you need any help feel free to message me..
EDIT: included a screenshot so you can check it out.
cant see text
hey i am using a 6800 on sprint i can sign in and im anyone on a computer but when someone logged in on a cell phone ims me i cant see their text they see mine but i dont see thiers just the time stamp dont know if their is a fix for this or why it happens any info would be great
You can give this one a try. It came with my ATT Tilt. It has all three messengers in one. AIM, Yahoo, and MSN. Hope it helps
Does the OZ IM program that comes on the Tilt use data or SMS?
gthing said:
Does the OZ IM program that comes on the Tilt use data or SMS?
Click to expand...
Click to collapse
it uses sms but it won't work on mogul will say md5 digests don't match or something like that.
I've found and begun using palringo. Nothing else I've found so far really compares.
I just wish verichat had a wm version.

New SMS problem never heard before!!

Hey guys, I havent heard anyone talking about this but i discovered e bug today!
So here's how it goes :
1: I was typing my sms halfway to person A
2: I went to type another half sms to person B
3: I went back to person A's incomplete sms, completed the message and sent out
OUTCOME: The msg went to person B instead!! But on my message chat log, it says that the msg was sent correctly to person A!
Anyone having this problem? So far I only heard of msg getting stucked in outbox, havent heard of this yet!!
why send 2 messages at the same time? seems a bit confusing!
because I was composing a long message to A. Then B needed me to sent an urgent reply over. So I decided to send B a reply first before continuing to compose e long msg to A!
Anw that shdn't be the problem since my previous phones can all handle this kind of multitasking!!
Yes ive had this problem of a message going to the wrong person even though in the log it states it didnt. Was quite a embarrassing text as well ):
exactly what happened to me! I hope this is e ONLY way to send a wrong msg to the wrong recipients without realising. SIIIGH
Anyone knows how do I feedback to HTC so they can make a patch or someting?!
i also have same problem as well as having text window open with person A and then person B texts me and it comes up on same window as my person A page. so now im replying right after this text of person B thinking im replying to person A and it goes to B. this is after i installed cookie home tab 185 and editor 1851 and then resinstall 185 and same thing. now it can also be after that one sms hotfix that is on hd2 site. whatever is the reason is there a way to fix it. also sometimes under swype my delete button wont work for texting but it will work in traditional qwerty so thats another bug as well as when this bug happens i get this other bug when u type with swype every letter has a period like john is j.o.h.n. and space bar wont work.
i dont know whats up right now i backed up with spb backup and will try uninstall cht and see if it was the cause or not but i dont think ive seen any post regarding this issue after posts for cht 185 on xda. any ideas?
i've read several threads about sms messages going to the wrong person.
i would just like some clarification from you guys! are you using HTC's messaging client or are you using windows mobile's default sms messaging application?
personally, i kept HTC messaging disabled on my stock ROM and i'm currently using an NRGZ ROM (Energy ROM "Standard" Sense June 11, 2010) which does away with the HTC messaging out of the box. i much rather like the stock messaging client and it also keeps your messages in a form that is much more friendly and compatible for backup with pimbackup and/or microsoft myphone.
the only reason i'm asking is if someone can confirm if the problem occurs ONLY and SPECIFICALLY with the HTC messaging client or it has also been known to occur when using the stock windows mobile client?
would just like to know if i should also be careful about my messaging practices...
i can confirm its using HTC messaging which i believe is what it uses as stock and when u do factory reset. i have factory reset three times and still get issues.
How do you disable HTC builtin messaging so i can use WinMo one? thanks.
ok i used Zenyee Disable HTC Messaging 1.2 to disable HTC and using win mo...it works correctly so far....i have question...how do u turn of the MESSAGE SENT notifcation that pops up after every sent message? i dont see any options for it and under MESSAGE OPTIONS .."request message delivery notification" box is unchecked. thanks
kenograndmaster said:
ok i used Zenyee Disable HTC Messaging 1.2 to disable HTC and using win mo...it works correctly so far....i have question...how do u turn of the MESSAGE SENT notifcation that pops up after every sent message? i dont see any options for it and under MESSAGE OPTIONS .."request message delivery notification" box is unchecked. thanks
Click to expand...
Click to collapse
You have to get a registry editor and change these keys:
Code:
[B]HKCU[/B]\Software\Microsoft\Inbox\Settings\SMSNoSentMsg =1 (default 0)
[B]HKLM[/B]\Software\Microsoft\Inbox\Settings\SMSNoSentMsg =1 (default 0)
sumflipnol said:
You have to get a registry editor and change these keys:
Code:
[B]HKCU[/B]\Software\Microsoft\Inbox\Settings\SMSNoSentMsg =1 (default 0)
[B]HKLM[/B]\Software\Microsoft\Inbox\Settings\SMSNoSentMsg =1 (default 0)
Click to expand...
Click to collapse
ok i did that and it works thanks...however i didnt have a SMSNoSent available at the HKCU section but I did see it at the HKLM area and enabled to 1.
i have another issue which you may know about. When you send a text...then when that person replies back, you get incoming text notification. When you click to reply to that person and youre in the reply window where the screen is greyish and theres a SEND button thats on the screen itself next to your reply box, sometimes that window shows my reply back to show up before he replied to my original text so its out of order. However, if you go to ALL MESSAGES and view a specific conversation that way then it shows correctly (this is the text reply white window where you see the colors icons next to the names.
Is this bug due to me replying to that text too quickly? so thats why it was out of order. this only happens sometimes ...im going to play around with it to see if it is only due to really quick replies.
Thanks
also i got this other problem. when you are in home screen and you get incoming text you will see the number 1 on your messaging icon and when you click it and reply to text, the number 1 doesnt disappear, it still treats that text you received as new and only way i can get rid of it is delete text which i would rather prefer it disappear after i read text. anyone can help please? thx
using winmo messaging with cookies home tab185 and editor 1851
This problem was already mentioned here on the forum, here: http://forum.xda-developers.com/showthread.php?t=642091&highlight=sms+wrong+contact
One workaround is to use the back or home hard keys instead of the "All Messages" option to travel between conversations.
kenograndmaster said:
also i got this other problem. when you are in home screen and you get incoming text you will see the number 1 on your messaging icon and when you click it and reply to text, the number 1 doesnt disappear, it still treats that text you received as new and only way i can get rid of it is delete text which i would rather prefer it disappear after i read text. anyone can help please? thx
using winmo messaging with cookies home tab185 and editor 1851
Click to expand...
Click to collapse
i got my hd2 on june 1st, 2010. i used the stock ROM for 30 full days with HTC messaging DISABLED (i even wrote a guide about it...search for threads started by me in the HD2 general section). in these 30 days, i learned that disabling HTC messaging had no SERIOUS ill effects, but it did have some annoying odd little problems like you've mentioned in the quoted post above. additionally, my "green LED" would keep flashing for several minutes after reading the last unread SMS. another odd problem was that accessing a contact's page within Sense would work fine until i scrolled to the contact's messaging history tab...it would just close the contact's page altogether! i suspect the reason for this was that this tab relies on a fully working HTC messaging client, which i had disabled!
due to these issues (and a few other issues unrelated to SMS messaging), i decided i had familiarized myself enough with the HD2 and its stock ROM...so i went for a good cooked ROM after a few weeks of research. i highly recommend NRGZ's "energy" ROMs (there are many flavors). all the variants of energy ROMs completely EXCLUDE HTC messaging and the stock messaging works 100% properly with no odd side effects.
you can battle these little issues all you want but you can save yourself some time and effort if you can find a ROM that suits all (or most) of your needs.
PS: it would be nice if someone can suggest even more custom ROMs that also exclude HTC messaging, as described in bold above in the second-last paragraph!
DeadVirus said:
This problem was already mentioned here on the forum, here: http://forum.xda-developers.com/showthread.php?t=642091&highlight=sms+wrong+contact
One workaround is to use the back or home hard keys instead of the "All Messages" option to travel between conversations.
Click to expand...
Click to collapse
that workaround worked so if im on person A window and i have partial reply text going and get a new text from B and when replyin to B with using back button i can text np.
my thing is sometimes when u have like 4 conversations going ...having it listed like in ALL MESSAGES is useful. im still seeing how having 3 conv. behaves with usin back button but thanks for that.
also since cookie home tab uses htc text app ..i wish i can use the text app that was being used in spb mobile shell 3.5. on that one the gui is better and u just press OK on the partial screen u were on and it will take u back to all messages and u can open and reply anyone n it works. this workaround pressing back key is good but i dont want to hard press a key all the time like this i prefer touchscreen . so in meantime im stickign with my cookie home tab 185 and will use back button for now or winmobile one.
p.s. i tested out this issue on my friends hd2 and neither his htc sense text app or the spb mobile shell text app is buggy and both work correctly. so i either can keep doing factory reset til it works right or deal with it.
The new update maybe can help ...
Update for HTC HD2 – New SMS Function Update
Date : 2010-07-05 Category : Update
This update for HTC HD2 amends the internal management of SMS functionality, and enhances SMS transmission stability, and lets you reach out to your friends and family with instant notifications. Keeping in touch has always been very important, and this update delivers just that: fast and reliable SMS messaging.
Download for UK or go to the HTC site for support.
queenkong said:
Hey guys, I havent heard anyone talking about this but i discovered e bug today!
So here's how it goes :
1: I was typing my sms halfway to person A
2: I went to type another half sms to person B
3: I went back to person A's incomplete sms, completed the message and sent out
OUTCOME: The msg went to person B instead!! But on my message chat log, it says that the msg was sent correctly to person A!
Anyone having this problem? So far I only heard of msg getting stucked in outbox, havent heard of this yet!!
Click to expand...
Click to collapse
*
Just one time i get it! I don't understand what's the **** at this moment ^^
Hi, I think you didn't realize unfinished texts should be saved as draft, otherwise it reappear in every new message tread input box in hTC message.
kenograndmaster said:
also i got this other problem. when you are in home screen and you get incoming text you will see the number 1 on your messaging icon and when you click it and reply to text, the number 1 doesnt disappear, it still treats that text you received as new and only way i can get rid of it is delete text which i would rather prefer it disappear after i read text. anyone can help please? thx
using winmo messaging with cookies home tab185 and editor 1851
Click to expand...
Click to collapse
This problem was already mentioned here on the forum, here: http://forum.xda-developers.com/show...+wrong+contact
One workaround is to use the back or home hard keys instead of the "All Messages" option to travel between conversations.
-------------------------------------------------------------
After an RMA and getting replacement phone with latest rom i still had the same problem. However, now thers a fix that helped me that TM said it came out june 8th regarding Contacts issue.
My contacts were saved to SIM only so i had this issue regarding texting wrong person. If you save to SIM/PHONE or PHONE only, texting works correctly. So this is the fix for me at least.
At the moment i saved my contacts out of my SIM and into my account. I did factory reset and then tested out texting without any contacts on PHONE or SIM by using numbers. This worked but you may suspect it may be due to using numbers rather than choosing of contact list? I will know soon cuz im waiting for TM to sync up my contacts from my act. to my phone and she had to create a trouble ticket. So when i get my contact list on my phone only, i will try again and make sure its works. Right now im crossing fingers but i believe it will work.
kenograndmaster said:
This problem was already mentioned here on the forum, here: http://forum.xda-developers.com/show...+wrong+contact
One workaround is to use the back or home hard keys instead of the "All Messages" option to travel between conversations.
-------------------------------------------------------------
After an RMA and getting replacement phone with latest rom i still had the same problem. However, now thers a fix that helped me that TM said it came out june 8th regarding Contacts issue.
My contacts were saved to SIM only so i had this issue regarding texting wrong person. If you save to SIM/PHONE or PHONE only, texting works correctly. So this is the fix for me at least.
At the moment i saved my contacts out of my SIM and into my account. I did factory reset and then tested out texting without any contacts on PHONE or SIM by using numbers. This worked but you may suspect it may be due to using numbers rather than choosing of contact list? I will know soon cuz im waiting for TM to sync up my contacts from my act. to my phone and she had to create a trouble ticket. So when i get my contact list on my phone only, i will try again and make sure its works. Right now im crossing fingers but i believe it will work.
Click to expand...
Click to collapse
I've never had my contacts on the SIM... and I have this problem. If you use numbers it probably works... the problem is with contacts...

Help - Absolute newbie and done 'something'!

I've had my HTC about 3 weeks and it's the first smartphone I've had so my question may be a bit stupid to you experts
I'm on pay monthly )2 if that makes a difference?
I've had problems with text messages randomly getting stuck in outbox and not being sent.
I've searched on the internet and found HTC have issued a fix LEO08007-07 so I downloaded it from the HTC site and have installed it.
It appears the TODAY app with all the weather , pictures, music shortcuts has now disappeared and I'm getting a blank front screen. The settings menu has changed and I cant access the HTC Message app at all
What have I done wrong and how can I get it back.
Sorry - just found Today shortcut (moved to a different part of screen but it's not working
I also forgot to add ROM 1.43 something
Sorry if it's straightforward. Cheers guys
If you've not done too many customisations I'd suggest a hard reset. To do this, turn the unit off, hold down both vol up and vol down and turn it back on and follow the screen instructions. I'd recommend doing this with both SD card and SIM card removed to be on the safe side
Thanks for that help. It's got me back to the start
Is there anything else 'easy' I can do to stop the texts getting stuck in my outbox?
Is there anything els you'd recommend for a newbie to do.
The ROM is 1.48.405.2 (71294) WWE
I hope you guys don't mind helping. As it's my first win mob I want to try and make the most of it but I'm not really tech minded
Its look like you have a bad settings for O2 (data,messages,..)
Go to Start\O2 and click Get Settings.
It should help. If no try this(only for SMS and Voice Mail )
Start\Settings\Personal\Phone\Services choose Voice Mail and Text Messages than press Get Settings.
It should show you these numbers if not fill it
Text massages service center: +447802000332
Voice Mail: 901
Press OK
All done
Hope it help
Thats great thanks.
Hope thats solved my problems

Categories

Resources